3D-Printed composite scaffolds based on poly(ε-caprolactone) filled with poly(glutamic acid)-modified cellulose nanocrystals for improved bone tissue regeneration

The manufacturing of modern scaffolds with customized geometry and personalization has become possible due to the three-dimensional (3D) printing technique. A novel type of 3D-printed scaffolds for bone tissue regeneration based on poly(ε-caprolactone) (PCL) filled with nanocrystalline cellulose modified by poly(glutamic acid) (PGlu-NCC) has been proposed in this study. The 3D printing set-ups were optimized in order to obtain homogeneous porous scaffolds. Both polymer composites and manufactured 3D scaffolds have demonstrated mechanical properties suitable for a human trabecular bone. Compression moduli were in the range of 334-396 MPa for non-porous PCL and PCL-based composites, and 101-122 MPa for porous scaffolds made of the same materials. In vitro mineralization study with the use of human mesenchymal stem cells (hMSCs) revealed the larger Ca deposits on the surface of PCL/PGlu-NCC composite scaffolds. Implantation of the developed 3D scaffolds into femur of the rabbits was carried out to observe close and delayed effects. The histological analysis showed the lowest content of immune cells and thin fibrous capsule, revealing low toxicity of the PCL/PGlu-NCC scaffolds seeded with rabbit MSCs (rMSCs) to the surrounding tissues. The most pronounced result on the generation of new bone tissue after implantation of PCL/PGlu-NCC + rMSCs scaffolds was detected by both microcomputed tomography and histological analysis. Around 33% and 55% of bone coverage were detected for composite 3D scaffolds with adhered rMSCs after 1 and 3 months of implantation, respectively. This achievement can be a result of synergistic effect of PGlu, which attracts calcium ions, and stem cells with osteogenic potential.

In Vitro Degradation of PHB/Bacterial Cellulose Biocomposite Scaffolds

The present work reported the preparation of biocomposites based on poly(3-hydroxybutyrate) (PHB), plasticizer, and bacterial cellulose (BC) by melt processing and their testing by means of thermal properties (DSC), water absorption, and in vitro degradation. The surface of the biocomposites was analyzed via atomic force microscopy (AFM). In vitro degradation of the biocomposites was evaluated by weight loss and thermal properties (DSC) assessment after the immersion of the specimens in phosphate-buffered saline solution (PBS of pH 7.4) over 20 days. The results showed that the BC can reduce the PHB crystallinity and promote its degradation under PBS medium. Moreover, it was found that the water absorption increased as the percentage of BC increased.

Modern Porous Polymer Implants: Synthesis, Properties, and Application

Abstract

The needs of modern surgery triggered the intensive development of transplantology, medical materials science, and tissue engineering. These directions require the use of innovative materials, among which porous polymers occupy one of the leading positions. The use of natural and synthetic polymers makes it possible to adjust the structure and combination of properties of a material to its particular application. This review generalizes and systematizes the results of recent studies describing requirements imposed on the structure and properties of synthetic (or artificial) porous polymer materials and implants on their basis and the advantages and limitations of synthesis methods. The most extensively employed, promising initial materials are considered, and the possible areas of application of polymer implants based on these materials are highlighted.

Novel Pathway for Efficient Covalent Modification of Polyester Materials of Different Design to Prepare Biomimetic Surfaces

To form modern materials with biomimic surfaces, the novel pathway for surface functionalization with specific ligands of well-known and widely used polyester-based rigid media was developed and optimized. Two types of material bases, namely, poly(lactic acid) and poly(ε-caprolactone), as well as two types of material design, e.g., supermacroporous matrices and nanoparticles (NPs), were modified via covalent attachment of preliminary oxidized polyvinylsaccharide poly(2-deoxy-N-methacryloylamido-d-glucose) (PMAG). This polymer, being highly biocompatible and bioinspired, was used to enhance hydrophilicity of the polymer surface and to provide the elevated concentration of reactive groups required for covalent binding of bioligands of choice. The specialties of the interaction of PMAG and its preliminary formed bioconjugates with a chemically activated polyester surface were studied and thoroughly discussed. The supermacroporous materials modified with cell adhesion motifs and Arg-Gly-Asp-containing peptide (RGD-peptide) were tested in the experiments on bone tissue engineering. In turn, the NPs were modified with bioligands ("self-peptide" or camel antibodies) to control their phagocytosis that can be important, for example, for the preparation of drug delivery systems.