Unlocking All-Solid Ion Selective Electrodes: Prospects in Crop Detection

This paper reviews the development of all-solid-state ion-selective electrodes (ASSISEs) for agricultural crop detection. Both nutrient ions and heavy metal ions inside and outside the plant have a significant influence on crop growth. This review begins with the detection principle of ASSISEs. The second section introduces the key characteristics of ASSISE and demonstrates its feasibility in crop detection based on previous research. The third section considers the development of ASSISEs in the detection of corps internally and externally (e.g., crop nutrition, heavy metal pollution, soil salinization, N enrichment, and sensor miniaturization, etc.) and discusses the interference of the test environment. The suggestions and conclusions discussed in this paper may provide the foundation for additional research into ion detection for crops.

Anodic Stripping Voltammetry on a Carbon-based Ion-Selective Electrode

In this study, we demonstrated the unique capability of carbon-based ion-selective electrode (ISE) to perform highly sensitive square wave anodic stripping voltammetry, while maintaining all the properties of an ISE, in terms of sensitivity, detection limit, response time and selectivity. Square wave anodic stripping voltammetry involves deposition and dissolution steps of metal ions, which means adsorption and desorption of metal ions on the conductive ion-selective membrane without losing its ion-sensing property. To demonstrate this capability, we chose a Ca2+ ion-selective microelectrode (μISE) as a potentiometric method and Cu2+-stripping voltammetry as an amperometric method. The carbon-based ISE surface is capable of quantifying nanomolar to micromolar Cu2+ in both a standard acetate buffer and a complex water sample. The Ca2+-μISE also showed a Nernstian slope of 29 mV / log [Ca2+] and a detection limit of 1 μM within the linear range of 1 μM to 10 mM. It thus opens an opportunity to use the low detection limit of anodic stripping voltammetry and the high selectivity of ISE-based potentiometry.

Electrochemical Properties of Nitrate-Selective Electrodes: The Dependence of Resistance on the Solution Concentration

The electrochemical properties of ion-exchanger-based solvent polymeric ion-selective electrodes (ISEs)—bulk and interfacial resistance, capacitance, and polarization under a galvanostatic current step—are studied, with a nitrate ISE based on tetradecylammonium nitrate (TDANO₃) as a model system. The study is performed by chronopotentiometric and impedance measurements, and focuses on the dependence of the aforementioned properties on the concentration of NO₃⁻ anions in solution. The impacts from the bulk and the interfacial charge transfer to the overall membrane resistance are revealed. It is shown that the bulk resistance of the membranes decreases over an increase of NO₃⁻ concentration within the range of a Nernstian potentiometric response of the ISE. This fact, also reported earlier for K⁺- and Ca²⁺-selective ISEs, is not in line with current views of the mechanism of the ISE response, or of the role of ion exchange in particular. The origin of this effect is unclear. Estimates are made for the concentration of ionized species (NO₃⁻ and TDA⁺) and, respectively, for the TDANO₃ association constant, as well as for the species diffusion coefficients in the membrane.