Determination of Heavy Metals in Herbal Food Supplements using Bismuth/Multi-walled Carbon Nanotubes/Nafion modified Graphite Electrodes sourced from Waste Batteries

An electrochemical sensor based on graphite electrode extracted from waste zinc-carbon battery is developed. The graphite electrode was modified with bismuth nanoparticles (BiNP), multi-walled carbon nanotubes (MWCNT) and Nafion via the drop coating method. The bare and modified graphite electrodes were used as the working electrode in anodic stripping voltammetry for the determination of trace amounts of cadmium (Cd²⁺) and lead (Pb²⁺). The modified electrode exhibited excellent electroanalytical performance for heavy metal detection in comparison with the bare graphite electrode. The linear concentration range from 5 parts per billion (ppb) to 1000 ppb (R² = 0.996), as well as detection limits of 1.06 ppb for Cd²⁺ and 0.72 ppb for Pb²⁺ were obtained at optimized experimental conditions and parameters. The sensor was successfully utilized for the quantification of Cd²⁺ and Pb²⁺ in herbal food supplement samples with good agreement to the results obtained by atomic absorption spectroscopy. Thus, the BiNP/MWCNT/Nafion modified graphite electrode is a cost-effective and environment-friendly sensor for monitoring heavy metal contamination.

Sensitive and Simultaneous Determination of Hydroquinone and Catechol in Water Using an Anodized Glassy Carbon Electrode with Polymerized 2-(Phenylazo) Chromotropic Acid

Hydroquinone (HQ) and catechol (CT) are considered as environmental pollutants with high toxicity. We have developed a simple electrochemical sensor using an anodized glassy carbon electrode modified with a stable 2-(phenylazo) chromotropic acid- (CH-) conducting polymer (PCH/AGCE). The PCH/AGCE sensor showed good electrocatalytic activity and reversibility towards the redox of HQ and CT in phosphate buffer solution (PBS, pH 7.0). The cyclic voltammetry (CV) in mixed solution of HQ and CT showed that the oxidation peaks of them became well resolved with a peak separation of 0.1 V. The detection limits of HQ and CT were 0.044 and 0.066 μM, respectively, in a wide linear response range of 1–300 μM for both. Moreover, the sensor displayed an excellent selectivity in the presence of common interferences. This study provided a simple, sensitive, and high recovery method for simultaneous and quantitative determination of HQ and CT in aqueous medium.