An Environmentally Friendly Flow Injection-Gas Diffusion System Using Roselle (Hibiscus sabdariffa L.) Extract as Natural Reagent for the Photometric Determination of Sulfite in Wines

In this work, a green and simpler method for photometric determination of sulfite based on a flow injection-gas diffusion (FI-GD) system using a natural reagent extracted from roselle (Hibiscus sabdariffa L.) was proposed. Despite the fact that the employed reaction is not selective to sulfite, its sensitivity is high, and the selectivity can be improved by coupling a GD unit to the FI system. The method involves monitoring a decrease in absorbance of the reagent solution that is used as an acceptor solution. When a standard solution or sample solution was injected into an acidic donor stream, the liberated sulfur dioxide diffuses through a gas-permeable membrane of the GD unit into the acceptor solution, causing color fading of the reagent. A linear analytical curve in the range of 5-100 mg L^-1 was obtained with a detection limit of 2 mg·L^-1. Relative standard deviations of 0.9%, 0.6%, and 0.6% were obtained for the determination of 30, 70, and 100 mg·L^-1 SO₃ ^2- (n = 11). The developed method was applied to wine samples, giving results that agreed with those obtained with the Ripper titrimetric method. The proposed method offers advantages of simplicity, cost-effectiveness, and being environmentally friendly such as reduced chemical consumption and less waste generation.

A New Validated Potentiometric Method for Sulfite Assay in Beverages Using Cobalt(II) Phthalocyanine as a Sensory Recognition Element

A simple potentiometric sensor is described for accurate, precise, and rapid determination of sulfite additives in beverages. The sensor is based on the use of cobalt phthalocyanine as a recognition material, dispersed in a plasticized poly(vinyl chloride) matrix membrane. o-Nitrophenyl octyl ether (o-NPOE) as a membrane solvent and tri-dodecylmethyl- ammonium chloride (TDMAC) as ion discriminators are used as membrane additives. Under the optimized conditions, sulfite ion is accurately and precisely measured under batch and flow injection modes of analysis. The sensor exhibits fast and linear response for 1.0 × 10-2-1.0 × 10-6 M (800-0.08 µg/mL) and 1.0 × 10-1-5.0 × 10-5 M (8000-4 µg/mL) sulfite with Nernstian slopes of -27.4 ± 0.3 and -23.7 ± 0.6 mV/concentration decade under static and hydrodynamic modes of operation, respectively. Results in good agreement with the standard iodometric method are obtained.Validation of the assay method is examined in details including precision, accuracy, bias, trueness, repeatability, reproducibility, and uncertainty and good performance characteristics of the method are obtained. The sensor response is stable over the pH range of 5 to 7 without any significant interference from most common anions. The advantages offered by the proposed sensor (i.e., wide range of assay, high accuracy and precision, low detection limit, reasonable selectivity, long term response stability, fast response, and long life span and absence of any sample pretreatment steps) suggest its use in the quality control/quality assurance routine tests in beverages industries, toxicological laboratories and by inspection authorities.