Determination of Ultra-Trace Cobalt in Water Samples Using Dispersive Liquid-Liquid Microextraction Followed by Graphite Furnace Atomic Absorption Spectrometry

A novel method for the determination of ultra-trace cobalt by dispersive liquid–liquid microextraction (DLLME) coupled with graphite furnace atomic absorption spectrometry has been developed. It is based on the color reaction of Co²⁺ with 2-(5-bromo-2-pyridylazo)-5-dimethylaminoaniline (5-Br-PADMA) in a Britton–Robinson buffer solution at pH 6.0 to form stable hydrophobic chelates, which were separated and enriched by DLLME with 1,2-dichloroethane (CH₂ClCH₂Cl) as extraction and acetonitrile (CH₃CN) as a dispersive solvent. The sedimented phase containing the chelates is then determined with GFAAS. Parameters that affect extraction efficiency, such as types and volumes of extraction and disperser solvents, pH of sample solution, extraction time, concentration of the chelating agent 5-Br-PADMA, and salt effect, were investigated. Under optimal conditions, the calibration graph was linear over the range 0.05–1.0 ng/mL, with a correlation coefficient of 0.9922 and a detection limit of 0.03 ng/mL. Preconcentration factor (PF) is calculated as the ratio of the aqueous solution volume (5 mL) to that of the organic phase volume (40 μL), and enrichment factor (EF) is calculated as the ratio of the slopes of the calibration graphs obtained with and without DLLME for 5.0 mL of sample solution, which were 120 and 112.5, respectively. The extraction efficiency, calculated by EF/PF·100, was 93.8%. The relative standard deviation (RSD) at the 0.5 ng/mL Co²⁺ level was 3.8% (n = 6). The method has been applied to the determination of trace cobalt in water samples with satisfactory results.

Efficiency enhancement of the spectrophotometric estimation of cobalt in waters and pharmaceutical preparations using dispersive liquid-liquid microextraction and microcells with long optical paths

In this paper, dispersive liquid-liquid microextraction (DLLME), long optical path microcells, and a selective chromogenic reagent were employed to improve the analytical efficiency of cobalt determination by spectrophotometry. The methodology proposed in the present study is based upon the microextraction of a cobalt(II) complex with 1-[4-[(2-hydroxynaphthalen-1-yl)methylideneamino] phenyl]ethanone (HNE) by DLLME and measurement of the absorbance of the sedimented phase using a microcell with an optical path length of 50 mm (Microcell-50). DLLME was performed using a binary mixture containing 900 μL of methanol as a dispersing solvent and 400 μL of CHCl₃ (extraction solvent) at pH 6-8 adjusted by a mixture of HCl and NaOH. The electronic spectrum of the dark brown complex recorded in the sedimented phase using Microcell-50 shows a well-defined peak at λ_max 324 ± 3 nm with a molar absorptivity of 1.08 × 10⁶ M^-1 cm^-1. Cobalt was monitored at a detection limit (LOD) of 0.08 μg L^-1 and in the linear concentration range of 0.45-10 μg L^-1, while the limit of quantitation (LOQ), relative standard deviation (RSD), and the enhancement factor (EF) were 0.264, 1.6 μgL^-1, and 223, respectively. Our method was evaluated by determining cobalt in certified reference materials and experimental samples, and the results were compared with ICP-MS measurements. Moreover, the chemical structure of the [Co(C₃₈H₂₈O₂N)₂] complex was suggested through using different characterization techniques such as Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), thermal analysis, and powder X-ray diffraction.

Vortex-assisted low density solvent and surfactant based dispersive liquid–liquid microextraction for sensitive spectrophotometric determination of cobalt

This study describes the development of vortex-assisted low density solvent and surfactant based dispersive liquid–liquid microextraction (VALS-DLLME) for Co(ii) prior to its spectrophotometric detection. The method consisted of the complexation of Co(ii) with pyrocatechol violet (PV) followed by the preconcentration of the Co(II)–PV complex using VALS-DLLME and then an absorption measurement at 600 nm. The optimum conditions for complex formation were a 1 : 3 mole ratio of Co(ii) and PV at pH 7.5, while the conditions for VALS-DLLME were 300 μL 1-dodecanol as extraction solvent, and 300 μL acetonitrile as dispersive solvent under a vortex for 20 s with the addition of cationic surfactant (0.02 mmol L⁻¹ CTAB). Under the optimum conditions, good linearity was in the range of 0.1–10 mg L⁻¹, the enrichment factor (EF) was 13.5 and the low limit of detection (LOD) was 0.04 mg L⁻¹. The method was applied to the analysis of Co(ii) in water, green leaf vegetable and vitamin B₁₂ samples. The proposed method provided good recoveries in the range of 86–104%, which were comparable to those obtained from flame atomic absorption spectrophotometry.

The formation of a Co(II)–PV complex and the VALS-DLLME procedure.