Enantiomer Recognition by the Difference in Adsorption Rates on the Surfaces of Chiral Crystals

The chirality of biopolymers remains one of the mysteries of Life. For such objects, the phenomenon of supramolecular chirality (SMC) is vital. Enantiomers can be recognized by the adsorption on surfaces with SMC. However, the mechanisms of such chiral recognition are still unknown. In this work, the adsorption kinetics of menthol test enantiomers on the surfaces of γ-glycine and NiSO4•6H2O chiral crystals was studied. It was found that the difference in adsorption was observed in nonequilibrium state more often than in equilibrium. If the enantioselectivity in equilibrium state was observed, the enantioselectivity coefficient α at nonequilibrium conditions was higher. The maximum α in nonequilibrium state was 2.44 for γ-glycine crystals and 2.12 for NiSO4•6H2O crystals. Even if no differences in adsorption were observed under adsorption-desorption equilibrium conditions, a significant enantioselectivity at nonequilibrium conditions was found. This has proved the possibility of chiral recognition on surfaces with SMC by the differences in adsorption rates. Such novel chiral recognition mechanism can provide enhanced enantioselectivity in adsorption, catalysis, chromatographic separation, and chemical sensing.

Degree and distribution of substitution of hydroxypropyl-β-cyclodextrin in enantioselective liquid-liquid extraction and countercurrent chromatographic enantioseparation

Nine types of hydroxypropyl-β-cyclodextrin (HP-β-CD) with different degrees and distributions of substitution were synthesised, and nine racemates were selected to investigate the effect of different degrees and distributions of substitution of HP-β-CD on the enantioseparation factor. ¹H NMR and GC/MS were used to characterise the synthesised HP-β-CD. The degree and distribution of substitution had a significant influence on enantioselective liquid-liquid extraction and enantioseparation by countercurrent chromatography. For most of the tested racemates, increasing both the degree of substitution and distribution of substitution at the C-2 position for HP-β-CD would lead to an increasing enantioseparation factor; the optimal enantioseparation factor of 2-phenylbutyric acid, tropic acid, 2,3-diphenylpropionic acid, 2-(4-hydroxylphenyl) propanoic acid, and naproxen was increased to 1.77, 1.53, 1.67, 1.61, and 1.75, respectively. The enantioseparation of racemic naproxen, 2-(4-hydroxylphenyl) propanoic acid, and 2,3-diphenylpropionic acid by countercurrent chromatography was optimised using HP-β-CD with a degree of substitution of 16.5, and peak resolution was significantly improved to 1.03, 1.35, and 1.01, respectively.

Rational design of highly enantioselective composite voltammetric sensors using a computationally predicted chiral modifier

The use of chiral modifiers is among the simplest and most popular strategies for synthesizing enantioselective voltammetric sensors that are applied for the analysis and discrimination of enantiomerical drugs in various media. The type and structure of the chiral modifier are the key factors for the creation of enantioselectivity to a specified analyte. We suggest a novel approach to the prediction of the quality of a chiral modifier for preparing highly enantioselective sensors. The suggested approach is based on the molecular mechanics modeling of the adsorption of analyte enantiomers on chiral modifiers and on the comparison of the corresponding adsorption energies (ΔE_ads ). The efficiency of our approach is demonstrated using the example of cyclodextrins and chiral single-wall carbon nanotubes as chiral modifiers, and a wide range of chiral analytes. We found that the experimental enantioselectivity (ϑ_exp ) measured using voltammetry linearly correlates with ΔE_ads . The suggested approach also showed good predictive power in application to enantioselective chromatography, which further validates its general applicability.

Chiral Metal-Organic Frameworks

In the past two decades, metal-organic frameworks (MOFs) or porous coordination polymers (PCPs) assembled from metal ions or clusters and organic linkers via metal-ligand coordination bonds have captivated significant scientific interest on account of their high crystallinity, exceptional porosity, and tunable pore size, high modularity, and diverse functionality. The opportunity to achieve functional porous materials by design with promising properties, unattainable for solid-state materials in general, distinguishes MOFs from other classes of materials, in particular, traditional porous materials such as activated carbon, silica, and zeolites, thereby leading to complementary properties. Scientists have conducted intense research in the production of chiral MOF (CMOF) materials for specific applications including but not limited to chiral recognition, separation, and catalysis since the discovery of the first functional CMOF (i.e., d- or l-POST-1). At present, CMOFs have become interdisciplinary between chirality chemistry, coordination chemistry, and material chemistry, which involve in many subjects including chemistry, physics, optics, medicine, pharmacology, biology, crystal engineering, environmental science, etc. In this review, we will systematically summarize the recent progress of CMOFs regarding design strategies, synthetic approaches, and cutting-edge applications. In particular, we will highlight the successful implementation of CMOFs in asymmetric catalysis, enantioselective separation, enantioselective recognition, and sensing. We envision that this review will provide readers a good understanding of CMOF chemistry and, more importantly, facilitate research endeavors for the rational design of multifunctional CMOFs and their industrial implementation.

Natural and Artificial Chiral-Based Systems for Separation Applications

Chiral separation has attracted much attention for basic research and industrial applications in analytical chemistry. Generally, chiral separations use natural or artificial chiral-based materials as adsorbents. To improve the precision and efficiency of chiral separation, focus has shifted from natural and synthetic adsorbents to binary combinations of materials. This review specifically summarizes the significant advancements made in natural and artificial chiral adsorbents as promising candidates for diverse drug and biomolecule separation applications as well as the remaining drawbacks and challenges for research on chiral separations. The mechanisms of chiral-based recognition and separation and history and development of natural and artificial chiral-based systems are the focus of this review. Future directions in natural and artificial chiral-based systems for practical separations and other applications are also presented.

Chiral differentiation of limonene in chiral nematic liquid crystals

Chirality is of great importance in physical and biological systems. It helps differentiate chemical reactions and physical processes. It was reported that the diffusion of mesogenic chiral guests in chiral nematic liquid crystal hosts profoundly depends on the chirality of the guest and host molecules. When the guest and host molecules have the same handedness, the diffusion is much faster than that when the guest and host molecules have the opposite handedness. In this paper, we report the discovery that chiral differentiation also exists in the diffusion of limonene, which is non-mesogenic in chiral nematic liquid crystals. The diffusion of l-limonene (right-handed) in chiral nematic liquid crystals with a right handed helical structure is faster than that of d-limonene (left-handed). This result might be important in understanding the effects of chirality on physical processes that take place in biological systems. In addition, this effect could be utilized for enantiomer separation in the pharmaceutical industry.

Evolution and Evaluation of GC Columns

A chromatographic column is the fundamental element required for gas-chromatographic analysis. The separation of components coming from complex mixtures, prior to their detection was leading to a prominent revolution in different areas of science. Moreover, current advances in gas chromatographic (GC) columns technology and development have been providing almost unlimited possibilities for analysis employing diverse matrices. We aim through this review article to describe the evolution of chromatographic columns, by pointing the most important stages, as well as the new trends and future perspectives predicted for the new generation of GC columns. Furthermore, it was in our scope to present the main fundamentals regarding the theoretical relationships that describe the chromatographic separation, to introduce concepts related to columns selection in accordance with the required application as well as to discuss the available evaluation parameters for columns efficiency. Consequently, the early stages of first columns preparation up to the development of GC capillary columns used nowadays, together with examples of their applications are also reported and described in detail.

Characterization of Amino Acid Based Molecular Micelles with Molecular Modeling

The enantiomers of chiral drugs often have different potencies, toxicities, and biochemical properties. Therefore, the FDA and other worldwide regulatory agencies require manufactures to test and prove the enantiomeric purity of chiral drugs. Amino acid based molecular micelles (AABMM) have been used in chiral CE separations since the 1990's because of their low environmental impact and because their properties can easily be tuned by changing the amino acids in the chiral surfactant headgroups. Using molecular dynamics simulations to investigate the structures and properties of AABMM is part of an ongoing study focusing on investigating and elucidating the factors responsible for chiral recognition with AABMM. The results will be useful for the proper design and selection of more efficient chiral selectors. The micelles investigated contained approximately twenty covalently linked surfactant monomers. Each monomer was in turn composed of an undecyl hydrocarbon chain bound to a dipeptide headgroup containing of all combinations of L-Alanine, L-Valine, and L-Leucine. These materials are of interest because they are effective chiral selectors in capillary electrophoresis separations. Molecular dynamics simulation analyses were used to investigate how the sizes and positions of the headgroup amino acid R-groups affected the solvent accessible surface areas of each AABMM chiral center. In addition, headgroup dihedral angle analyses were used to investigate how amino acid R-group size and position affected the overall headgroup conformations. Finally, distance measurements were used to study the structural and conformational flexibilities of each AABMM headgroup. All analyses were performed in the context of a broader study focused on developing structure-based predictive tools to identify the factors responsible for (a) self-assembly, (b) function, (c) higher ordered structure and (d) molecular recognition of these amino acid based molecular micelles.