Chitosan or Cyclodextrin Grafted with Oleic Acid Self-Assemble into Stabilized Polymeric Micelles with Potential of Drug Carriers

Polymeric micelles combining the advantages of biocompatible poly- and oligosaccharides with classical micellar amphiphilic systems represent a promising class of drug carriers. In this work, micelles based on chitosan (or cyclodextrin) and oleic acid with various modification degrees were synthesized-the most optimal grafting degree is 15-30% in terms of CMC. According to NTA data, micelles have a hydrodynamic diameter of the main fraction of 60-100 nm. The inclusion of the antibacterial agents: moxifloxacin or rifampicin in micelles was studied by FTIR spectroscopy and fluorescence spectroscopy using a pyrene label (using monomer-excimer approach). When aromatic molecules are incorporated into micelles, the absorption bands of C-H bonds of the fatty tails of micelles shift towards smaller wavenumbers, indicating a stabilization of the micelles structure, and the microenvironment of the drug molecule changes according to the low frequencies shift and intensity changes in oscillation frequencies of 1450 cm^-1 corresponding to aromatic fragment. Loading of moxifloxacin and rifampicin into micelles leads to a change in the fluorescent properties: a shift of the maximum of fluorescence emission to the long-wavelength region and an increase in the fluorescence anisotropy due to a drastic increase in the hydrodynamic volume of the fluorophore-containing rotating fragment. Using the pyrene label, the critical micelle concentrations were determined: from 4 to 30 nM depending on the polymer composition. Micellar systems enhance the effect of the antibiotic by increasing the penetration into bacterial cells and storing the drug in a protective coat. As a part of the supramolecular structure, the antibiotic remains active for more than four days, while in free form, the activity decreases after two days. In pharmacokinetic experiments, in vivo moxifloxacin in micellar systems show 1.7 times more efficiency compared to free form; moreover, two times higher maximal concentration in the blood is achieved. The advantage of polymer micellar systems in comparison with simple cyclodextrins and chitosan, which do not so significantly contribute to the antibacterial and pharmacokinetic parameters, was shown. Thus, polymeric micelles are one of the key approaches to improving the effectiveness of antibacterial drugs and solving the problems of resistant bacterial infections and multidrug resistance.

The Solubility Studies and the Complexation Mechanism Investigations of Biologically Active Spiro[cyclopropane-1,3'-oxindoles] with β-Cyclodextrins

In this work, we first improved the aqueous solubility of biologically active spiro[cyclopropane-1,3′-oxindoles] (SCOs) via their complexation with different β-cyclodextrins (β-CDs) and proposed a possible mechanism of the complex formation. β-CDs significantly increased the water solubility of SCOs (up to fourfold). Moreover, the nature of the substituents in the β-CDs influenced the solubility of the guest molecule (MβCD > SBEβCD > HPβCD). Complexation preferably occurred via the inclusion of aromatic moieties of SCOs into the hydrophobic cavity of β-CDs by the numerous van der Waals contacts and formed stable supramolecular systems. The phase solubility technique and optical microscopy were used to determine the dissociation constants of the complexes (Kc~102 M−1) and reveal a significant decrease in the size of the formed crystals. FTIR-ATR microscopy, PXRD, and 1H-1H ROESY NMR measurements, as well as molecular modeling studies, were carried out to elucidate the host−guest interaction mechanism of the complexation. Additionally, in vitro experiments were carried out and revealed enhancements in the antibacterial activity of SCOs due to their complexation with β-CDs.

Mannosylated Polymeric Ligands for Targeted Delivery of Antibacterials and Their Adjuvants to Macrophages for the Enhancement of the Drug Efficiency

Bacterial infections and especially resistant strains of pathogens localized in macrophages and granulomas are intractable diseases that pose a threat to millions of people. In this paper, the theoretical and experimental foundations for solving this problem are proposed due to two key aspects. The first is the use of a three-component polymer system for delivering fluoroquinolones to macrophages due to high-affinity interaction with mannose receptors (CD206). Cytometry assay determined that 95.5% macrophage-like cells were FITC-positive after adding high-affine to CD206 trimannoside conjugate HPCD-PEI1.8-triMan, and 61.7% were FITC-positive after adding medium-affine ligand with linear mannose label HPCD-PEI1.8-Man. The second aspect is the use of adjuvants, which are synergists for antibiotics. Using FTIR and NMR spectroscopy, it was shown that molecular containers, namely mannosylated polyethyleneimines (PEIs) and cyclodextrins (CDs), load moxifloxacin (MF) with dissociation constants of the order of 10⁻⁴–10⁻⁶ M; moreover, due to prolonged release and adsorption on the cell membrane, they enhance the effect of MF. Using CLSM, it was shown that eugenol (EG) increases the penetration of doxorubicin (Dox) into cells by an order of magnitude due to the creation of defects in the bacterial wall and the inhibition of efflux proteins. Fluorescence spectroscopy showed that 0.5% EG penetrates into bacteria and inhibits efflux proteins, which makes it possible to increase the maximum concentration of the antibiotic by 60% and maintain it for several hours until the pathogens are completely neutralized. Regulation of efflux is a possible way to overcome multiple drug resistance of both pathogens and cancer cells.

Cyclodextrin Inclusion Complexes with Antibiotics and Antibacterial Agents as Drug-Delivery Systems—A Pharmaceutical Perspective

Cyclodextrins (CDs) are a family of cyclic oligosaccharides, consisting of a macrocyclic ring of glucose subunits linked by α-1,4 glycosidic bonds. The shape of CD molecules is similar to a truncated cone with a hydrophobic inner cavity and a hydrophilic surface, which allows the formation of inclusion complexes with various molecules. This review article summarises over 200 reports published by the end of 2021 that discuss the complexation of CDs with antibiotics and antibacterial agents, including beta-lactams, tetracyclines, quinolones, macrolides, aminoglycosides, glycopeptides, polypeptides, nitroimidazoles, and oxazolidinones. The review focuses on drug-delivery applications such as improving solubility, modifying the drug-release profile, slowing down the degradation of the drug, improving biological membrane permeability, and enhancing antimicrobial activity. In addition to simple drug/CD combinations, ternary systems with additional auxiliary substances have been described, as well as more sophisticated drug-delivery systems including nanosponges, nanofibres, nanoparticles, microparticles, liposomes, hydrogels, and macromolecules. Depending on the desired properties of the drug product, an accelerated or prolonged dissolution profile can be achieved when combining CD with antibiotics or antimicrobial agents.

Spectroscopy Approach for Highly-Efficient Screening of Lectin-Ligand Interactions in Application for Mannose Receptor and Molecular Containers for Antibacterial Drugs

Rational search of a ligand for a specific receptor is a cornerstone of a typical drug discovery process. However, to make it more “rational” one would appreciate having detailed information on the functional groups involved in ligand-receptor interaction. Typically, the 3D structure of a ligand-receptor complex can be built on the basis of time-consuming X-ray crystallography data. Here, a combination of FTIR and fluorescence methods, together with appropriate processing, yields valuable information about the functional groups of both the ligand and receptor involved in the interaction, with the simplicity of conventional spectrophotometry. We have synthesized the “molecular containers” based on cyclodextrins, polyethyleneimines (PEI) or spermine with mannose-rich side-chains of different molecular architecture (reticulated, star-shaped and branched) with variable parameters to facilitate delivery to alveolar macrophages. We have shown that synthetic mannose-rich conjugates are highly affine to the model mannose receptor ConA: K_d ≈ 10⁻⁵–10⁻⁷ M vs. natural ligand trimannoside (10⁻⁵ M). Further, it was shown that molecular containers effectively load levofloxacin (dissociation constants are 5·10⁻⁴–5·10⁻⁶ M) and the eugenol adjuvant (up to 15–80 drug molecules for each conjugate molecule) by including them in the cyclodextrins cavities, as well as by interacting with polymer chains. Promising formulations of levofloxacin and its enhancer (eugenol) in star-shaped and polymer conjugates of high capacity were obtained. UV spectroscopy demonstrated a doubling of the release time of levofloxacin into the external solution from the complexes with conjugates, and the effective action time (time of 80% release) was increased from 0.5 to 20–70 h. The synergy effect of antibacterial activity of levofloxacin and its adjuvants eugenol and apiol on Escherichia coli was demonstrated: the minimum effective concentration of the antibiotic was approximately halved.

A critical review on the particle generation and other applications of rapid expansion of supercritical solution

The novel particle generation processes of Active Pharmaceutical Ingredient (API)/drug have been extensively explored in recent decades due to their wide-range applications in the pharmaceutical industry. The Rapid Expansion of Supercritical Solutions (RESS) is one of the promising techniques to obtain the fine particles (micro to nano-size) of APIs with narrow particle size distribution (PSD). In RESS, supercritical carbon dioxide (SC CO₂) and API are used as solvent and solute respectively. In this literature survey, the application of RESS in the formation of fine particles is critically reviewed. Solubility of API in SC CO₂ and supersaturation are the key factors in tuning the particle size. The different approaches to model and predict the solubility of API in SC CO₂ are discussed. Then, the effect of process parameters on mean particle size and the particle size distribution are interpreted in the context of solubility and supersaturation. Furthermore, the less-explored applications of RESS in preparation of solid-lipid nanoparticles, liposome, polymorphic conversion, cocrystallization and inclusion complexation are compared with traditional processes. The solubility enhancement of API in SC CO₂ using co-solvent and its applications in particle generation are explored in published literature. The development and modifications in the conventional RESS process to overcome the limitations of RESS are presented. Finally, the perspective on RESS with special attention to its commercial operation is highlighted.