Mechanical and material properties of the subchondral bone plate from the femoral head of patients with osteoarthritis or osteoporosis

Culture system for longitudinal monitoring of bone dynamics ex vivo

To quantify and visualize both bone formation and resorption within osteochondral explants cultured ex vivo is challenging with the current analysis techniques. An approach that enables monitoring of bone remodeling dynamics is longitudinal microcomputed tomography (µCT), a non-destructive technique that relies on repeated µCT scanning and subsequent registration of consecutive scans. In this study, a two-compartment culture system suitable for osteochondral explants that allowed for µCT scanning during ex vivo culture was established. Explants were scanned repeatedly in a fixed orientation, which allowed assessment of bone remodeling due to adequate image registration. Using this method, bone formation was found to be restricted to the outer surfaces when cultured statically. To demonstrate that the culture system could capture differences in bone remodeling, explants were cultured statically and under dynamic compression as loading promotes osteogenesis. No quantitative differences between static and dynamic culture were revealed. Still, only in dynamic conditions, bone formation was visualized on trabecular surfaces located within the inner cores, suggesting enhanced bone formation towards the center of the explants upon mechanical loading. Taken together, the ex vivo culture system in combination with longitudinal µCT scanning and subsequent registration of images demonstrated potential for evaluating bone remodeling within explants.

Mechanical and structural properties of articular cartilage and subchondral bone in human osteoarthritic knees

Knee osteoarthritis (OA), characterized by multiple joint tissue degenerations, remains a significant clinical challenge. Recent evidence suggests that crosstalk within the osteochondral unit may drive OA progression. Although structural-biomechanical properties of bone and cartilage have been studied, potential interaction within the osteochondral unit in the context of OA has yet to be investigated. We performed comprehensive structural and biomechanical quantification of the cartilage, subchondral bone plate (SBP), and subchondral trabecular bone (STB) using 101 osteochondral cores collected from tibial plateaus of 12 control human cadavers (CT, 5 male/7 female) and 19 patients undergoing total knee replacement (OA, 6 male/13 female). For each sample, we quantified SBP microstructure, plate-and-rod morphological properties of the STB using individual trabecula segmentation, and morphological and compositional properties of the articular cartilage. We also performed indentation testing on each compartment of the osteochondral unit to extract the respective structural-mechanical properties. Cartilage thickness was lower in moderate and severe OA regions, while Osteoarthritis Research Society International score was higher only in severe OA regions. GAG content did not change in any OA region. Aggregate and shear moduli were lower only in severe OA regions, while permeability was lower only in moderate OA regions. In the SBP, thickness and tissue mineral density were higher in moderate and severe OA regions. Tissue modulus of STB was lower in moderate OA regions despite a thicker and more mineralized SBP; this deterioration was not observed in severe OA regions. Regression analysis revealed strong correlations between cartilage and STB properties in CT; these correlations were also found in moderate OA regions but were not observed in severe OA regions. In summary, our findings comprehensively characterize the human OA osteochondral unit. Importantly, uncoupling cartilage and subchondral bone structural-mechanical properties may be a hallmark of OA.

3D Niche-Inspired Scaffolds as a Stem Cell Delivery System for the Regeneration of the Osteochondral Interface

The regeneration of the osteochondral unit represents a challenge due to the distinct cartilage and bone phases. Current strategies focus on the development of multiphasic scaffolds that recapitulate features of this complex unit and promote the differentiation of implanted bone-marrow derived stem cells (BMSCs). In doing so, challenges remain from the loss of stemness during in vitro expansion of the cells and the low control over stem cell activity at the interface with scaffolds in vitro and in vivo. Here, this work scaffolds inspired by the bone marrow niche that can recapitulate the natural healing process after injury. The construct comprises an internal depot of quiescent BMSCs, mimicking the bone marrow cavity, and an electrospun (ESP) capsule that "activates" the cells to migrate into an outer "differentiation-inducing" 3D printed unit functionalized with TGF-β and BMP-2 peptides. In vitro, niche-inspired scaffolds retained a depot of nonproliferative cells capable of migrating and proliferating through the ESP capsule. Invasion of the 3D printed cavity results in location-specific cell differentiation, mineralization, secretion of alkaline phosphatase (ALP) and glycosaminoglycans (GAGs), and genetic upregulation of collagen II and collagen I. In vivo, niche-inspired scaffolds are biocompatible, promoted tissue formation in rat subcutaneous models, and regeneration of the osteochondral unit in rabbit models.

Biomechanics of the Human Osteochondral Unit: A Systematic Review

The damping system ensured by the osteochondral (OC) unit is essential to deploy the forces generated within load-bearing joints during locomotion, allowing furthermore low-friction sliding motion between bone segments. The OC unit is a multi-layer structure including articular cartilage, as well as subchondral and trabecular bone. The interplay between the OC tissues is essential in maintaining the joint functionality; altered loading patterns can trigger biological processes that could lead to degenerative joint diseases like osteoarthritis. Currently, no effective treatments are available to avoid degeneration beyond tissues' recovery capabilities. A thorough comprehension on the mechanical behaviour of the OC unit is essential to (i) soundly elucidate its overall response to intra-articular loads for developing diagnostic tools capable of detecting non-physiological strain levels, (ii) properly evaluate the efficacy of innovative treatments in restoring physiological strain levels, and (iii) optimize regenerative medicine approaches as potential and less-invasive alternatives to arthroplasty when irreversible damage has occurred. Therefore, the leading aim of this review was to provide an overview of the state-of-the-art-up to 2022-about the mechanical behaviour of the OC unit. A systematic search is performed, according to PRISMA standards, by focusing on studies that experimentally assess the human lower-limb joints' OC tissues. A multi-criteria decision-making method is proposed to quantitatively evaluate eligible studies, in order to highlight only the insights retrieved through sound and robust approaches. This review revealed that studies on human lower limbs are focusing on the knee and articular cartilage, while hip and trabecular bone studies are declining, and the ankle and subchondral bone are poorly investigated. Compression and indentation are the most common experimental techniques studying the mechanical behaviour of the OC tissues, with indentation also being able to provide information at the micro- and nanoscales. While a certain comparability among studies was highlighted, none of the identified testing protocols are currently recognised as standard for any of the OC tissues. The fibril-network-reinforced poro-viscoelastic constitutive model has become common for describing the response of the articular cartilage, while the models describing the mechanical behaviour of mineralised tissues are usually simpler (i.e., linear elastic, elasto-plastic). Most advanced studies have tested and modelled multiple tissues of the same OC unit but have done so individually rather than through integrated approaches. Therefore, efforts should be made in simultaneously evaluating the comprehensive response of the OC unit to intra-articular loads and the interplay between the OC tissues. In this regard, a multidisciplinary approach combining complementary techniques, e.g., full-field imaging, mechanical testing, and computational approaches, should be implemented and validated. Furthermore, the next challenge entails transferring this assessment to a non-invasive approach, allowing its application in vivo, in order to increase its diagnostic and prognostic potential.

Mice heterozygous for an osteogenesis imperfecta-linked MBTPS2 variant display a compromised subchondral osteocyte lacunocanalicular network associated with abnormal articular cartilage

Missense variants in the MBTPS2 gene, located on the X chromosome, have been associated with an X-linked recessive form of osteogenesis imperfecta (X-OI), an inherited bone dysplasia characterized by multiple and recurrent bone fractures, short stature, and various skeletal deformities in affected individuals. The role of site-2 protease, encoded by MBTPS2, and the molecular pathomechanism underlying the disease are to date elusive. This study is the first to report on the generation of two Mbtps2 mouse models, a knock-in mouse carrying one of the disease-causative MBTPS2 variants (N455S) and a Mbtps2 knock-out (ko) mouse. Because both loss-of-function variants lead to embryonic lethality in hemizygous male mutant mice, we performed a comprehensive skeletal analysis of heterozygous Mbtps2+/N455S and Mbtps2+/ko female mice. Both models displayed osteochondral abnormalities such as thinned subchondral bone, altered subchondral osteocyte interconnectivity as well as thickened articular cartilage with chondrocyte clustering, altogether resembling an early osteoarthritis (OA) phenotype. However, distant from the joints, no alterations in the bone mass and turnover could be detected in either of the mutant mice. Based on our findings we conclude that MBTPS2 haploinsufficiency results in early OA-like alterations in the articular cartilage and underlying subchondral bone, which likely precede the development of typical OI phenotype in bone. Our study provides first evidence for a potential role of site-2 protease for maintaining homeostasis of both bone and cartilage.

Characterization of mechanical stiffness using additive manufacturing and finite element analysis: potential tool for bone health assessment

BACKGROUND

Bone health and fracture risk are known to be correlated with stiffness. Both micro-finite element analysis (μFEA) and mechanical testing of additive manufactured phantoms are useful approaches for estimating mechanical properties of trabecular bone-like structures. However, it is unclear if measurements from the two approaches are consistent. The purpose of this work is to evaluate the agreement between stiffness measurements obtained from mechanical testing of additive manufactured trabecular bone phantoms and μFEA modeling. Agreement between the two methods would suggest 3D printing is a viable method for validation of μFEA modeling.

METHODS

A set of 20 lumbar vertebrae regions of interests were segmented and the corresponding trabecular bone phantoms were produced using selective laser sintering. The phantoms were mechanically tested in uniaxial compression to derive their stiffness values. The stiffness values were also derived from in silico simulation, where linear elastic μFEA was applied to simulate the same compression and boundary conditions. Bland-Altman analysis was used to evaluate agreement between the mechanical testing and μFEA simulation values. Additionally, we evaluated the fidelity of the 3D printed phantoms as well as the repeatability of the 3D printing and mechanical testing process.

RESULTS

We observed good agreement between the mechanically tested stiffness and μFEA stiffness, with R2 of 0.84 and normalized root mean square deviation of 8.1%. We demonstrate that the overall trabecular bone structures are printed in high fidelity (Dice score of 0.97 (95% CI, [0.96,0.98]) and that mechanical testing is repeatable (coefficient of variation less than 5% for stiffness values from testing of duplicated phantoms). However, we noticed some defects in the resin microstructure of the 3D printed phantoms, which may account for the discrepancy between the stiffness values from simulation and mechanical testing.

CONCLUSION

Overall, the level of agreement achieved between the mechanical stiffness and μFEA indicates that our μFEA methods may be acceptable for assessing bone mechanics of complex trabecular structures as part of an analysis of overall bone health.

Injection of kaolin/carrageenan in the rat knee joint induces progressive experimental knee osteoarthritis

ABSTRACT

Osteoarthritis (OA), the most common joint disorder worldwide, is characterized by progressive degeneration of articular and periarticular structures, leading to physical and emotional impairments that greatly affect the quality of life of patients. Unfortunately, no therapy has been able to halt the progression of the disease. Owing to the complexity of OA, most animal models are only able to mimic a specific stage or feature of the human disorder. In this work, we demonstrate the intraarticular injection of kaolin or carrageenan leads to the progressive degeneration of the rat's knee joint, accompanied by mechanical hyperalgesia and allodynia, gait impairments (reduced contact area of the affected limb), and radiological and histopathological findings concomitant with the development of human grade 4 OA. In addition, animals also display emotional impairments 4 weeks after induction, namely, anxious and depressive-like behaviour, important and common comorbidities of human OA patients. Overall, prolonging kaolin or carrageenan-induced monoarthritis mimics several important physical and psychological features of human OA in both male and female rodents and could be further applied in long-term studies of OA-associated chronic pain.

Acupotomy ameliorates subchondral bone absorption and mechanical properties in rabbits with knee osteoarthritis by regulating bone morphogenetic protein 2-Smad1 pathway

OBJECTIVE

To investigate the effects of acupotomy on the subchondral bone absorption and mechanical properties in rabbits with knee osteoarthritis (KOA).

METHODS

The rabbits were divided into blank control, model, acupotomy and electroacupuncture (EA) groups, with 12 rabbits in each. Modified Videman's method was used to prepare KOA model. The acupotomy and EA group were given indicated intervention for 3 weeks. The behavior of rabbits in each group was recorded. Subsequently, cartilage-subchondral bone units were obtained and morphological changes were observed by optical microscope and micro computed tomography. Compression test was used to detect the mechanical properties of subchondral bone, Western blot and real-time polymerase chain reaction (RT-PCR) were applied to detect the expression of bone morphogenetic protein 2-Smad1 (BMP2-Smad1) pathway in subchondral bone.

RESULTS

Compared with the control group, rabbits in the KOA group showed lameness, knee pain, and cartilage degradation; the subchondral bone showed active resorption, the mechanical properties decreased significantly and the BMP2-Smad1 pathway downregulated significantly. Both acupotomy and EA intervention could increase the thickness of trabecular bone (Tb. Th), the bone volume fraction (BV/TV) and the thickness of subchondral bone plate, reduce the separation of trabecular bone (Tb. Sp), improve the maximum load and elastic modulus of subchondral bone, and effectively delay cartilage degeneration in KOA rabbits. This process may be achieved through upregulation the related proteins of BMP2-Smad1 pathway. The maximum load and elastic modulus of subchondral bone in the acupotomy group were slightly better than those in the EA group.

CONCLUSIONS

Acupotomy could effectively protect cartilage by inhibiting abnormal bone resorption and improving mechanical properties of subchondral bone thorough the related proteins of BMP2-Smad1 pathway in KOA rabbits.

3D profiling of mouse epiphyses across ages reveals new potential imaging biomarkers of early spontaneous osteoarthritis

Worldwide research groups and funding bodies have highlighted the need for imaging biomarkers to predict osteoarthritis (OA) progression and treatment effectiveness. Changes in trabecular architecture, which can be detected with non-destructive high-resolution CT imaging, may reveal OA progression before apparent articular surface damage. Here, we analysed the tibial epiphyses of STR/Ort (OA-prone) and CBA (healthy, parental control) mice at different ages to characterise the effects of mouse age and strain on multiple bony parameters. We isolated epiphyseal components using a semi-automated method, and measured the total epiphyseal volume; cortical bone, trabecular bone and marrow space volumes; mean trabecular and cortical bone thicknesses; trabecular volume relative to cortical volume; trabecular volume relative to epiphyseal interior (trabecular BV/TV); and the trabecular degree of anisotropy. Using two-way ANOVA (significance level ≤0.05), we confirmed that all of these parameters change significantly with age, and that the two strains were significantly different in cortical and trabecular bone volumes, and trabecular degree of anisotropy. STR/Ort mice had higher cortical and trabecular volumes and a lower degree of anisotropy. As the two mouse strains reflect markedly divergent OA predispositions, these parameters have potential as bioimaging markers to monitor OA susceptibility and progression. Additionally, significant age/strain interaction effects were identified for total epiphyseal volume, marrow space volume and trabecular BV/TV. These interactions confirm that the two mouse strains have different epiphyseal growth patterns throughout life, some of which emerge prior to OA onset. Our findings not only propose valuable imaging biomarkers of OA, but also provide insight into ageing 3D epiphyseal architecture bone profiles and skeletal biology underlying the onset and development of age-related OA in STR/Ort mice.

Finite Element Analysis of Different Osseocartilaginous Reconstruction Techniques in Animal Model Knees

Lesions of the articular cartilage are frequent in all age populations and lead to functional impairment. Multiple surgical techniques have failed to provide an effective method for cartilage repair. The aim of our research was to evaluate the effect of two different compression forces on three types of cartilage repair using finite element analysis (FEA). Initially, an in vivo study was performed on sheep. The in vivo study was prepared as following: Case 0-control group, without cartilage lesion; Case 1-cartilage lesion treated with macro-porous collagen implants; Case 2-cartilage lesion treated with collagen implants impregnated with bone marrow concentrate (BMC); Case 3-cartilage lesion treated with collagen implants impregnated with adipose-derived stem cells (ASC). Using the computed tomography (CT) data, virtual femur-cartilage-tibia joints were created for each Case. The study showed better results in bone changes when using porous collagen implants impregnated with BMC or ASC stem cells for the treatment of osseocartilaginous defects compared with untreated macro-porous implant. After 7 months postoperative, the presence of un-resorbed collagen influences the von Mises stress distribution, total deformation, and displacement on the Z axis. The BMC treatment was superior to ASC cells in bone tissue morphology, resembling the biomechanics of the control group in all FEA simulations.

Level dependent alterations in human facet cartilage mechanics and bone morphometry with spine degeneration

The zygapophyseal joints of the spine, also known as the facet joints, are paired diarthrodial joints posterior to the intervertebral disc and neural elements. The pathophysiology of facet osteoarthritis (OA), as well as crosstalk between the disc and facets, remains largely understudied compared to disc degeneration. The purpose of this study was to characterize alterations to human facet cartilage and subchondral bone across a spectrum of degeneration and to investigate correlations between disc and facet degeneration. Human lumbar facet articular surfaces from six independent donors were subject to creep indentation mechanical testing to quantify cartilage mechanical properties, followed by microcomputed tomography (µCT) analyses for subchondral bone morphometry. The degenerative state of each articular surface was assessed via macroscopic scoring and via Osteoarthritis Research Society International histopathology scoring. Our data suggest reduced facet cartilage compressive and tensile moduli and increased permeability with increasing degenerative grade, particularly at the lower levels of the spine. µCT analyses revealed spinal level-dependent alterations to the subchondral bone, with an increase in trabecular bone at the L4-L5 level, but a decrease at the upper levels of the lumbar spine with increasing degenerative grade. Cortical bone volume fraction was generally decreased with increasing degenerative grade across spinal levels. Correlation analysis revealed several associations between quantitative measures of disc degeneration and facet OA. This study showed that alterations in the mechanical properties of facet cartilage and in the structural properties of facet subchondral bone correlated with aspects of disc degeneration and were highly dependent on spinal level.

Spatial links between subchondral bone architectural features and cartilage degeneration in osteoarthritic joints

Early diagnosis of osteoarthritis (OA), before the onset of irreversible changes is crucial for understanding the disease process and identifying potential disease-modifying treatments from the earliest stage. OA is a whole joint disease and affects both cartilage and the underlying subchondral bone. However, spatial relationships between cartilage lesion severity (CLS) and microstructural changes in subchondral plate and trabecular bone remain elusive. Herein, we collected femoral heads from hip arthroplasty for primary osteoarthritis (n = 7) and femoral neck fracture (n = 6; non-OA controls) cases. Samples were regionally assessed for cartilage lesions by visual inspection using Outerbridge classification and entire femoral heads were micro-CT scanned. Scans of each femoral head were divided into 4 quadrants followed by morphometric analysis of subchondral plate and trabecular bone in each quadrant. Principal component analysis (PCA), a data reduction method, was employed to assess differences between OA and non-OA samples, and spatial relationship between CLS and subchondral bone changes. Mapping of the trabecular bone microstructure in OA patients with low CLS revealed trabecular organisation resembling non-OA patients, whereas clear differences were identifiable in subchondral plate architecture. The OA-related changes in subchondral plate architecture were summarised in the first principle component (PC1) which correlated with CLS in all quadrants, whilst by comparison such associations in trabecular bone were most prominent in the higher weight-bearing regions of the femoral head. Greater articular cartilage deterioration in OA was regionally-linked with lower BV/TV, TMD and thickness, and greater BS/BV and porosity in the subchondral plate; and with thinner, less separated trabeculae with greater TMD and BS/BV in the trabecular bone. Our findings suggest that impairment of subchondral bone microstructure in early stage of OA is more readily discernible in the cortical plate and that morphological characterisation of the femoral head bone microstructure may allow for earlier OA diagnosis and monitoring of progression.

Analysis of hydration and subchondral bone density on the viscoelastic properties of bovine articular cartilage

Background

Articular cartilage is known to be a viscoelastic material, however little research has explored the impact of cartilage water content and bone density on its viscoelasticity. This study aimed to isolate subchondral bone density and hydration of articular cartilage and analyse their effects on the viscoelastic properties of articular cartilage.

Methods

Dynamic mechanical analysis was used to test samples at frequencies of 1, 8, 12, 29, 49, 71, and 88 Hz. Synthetic bone material with densities of 663.7 kg/m³ and 156.8 kg/m³ were used to mimic the bone mineral density (BMD). Dehydration occurred in a stepwise manner at relative humidity (RH) levels of 100%, 30%, and 1%. These relative humidity levels led to water contents of approximately 76%, 8.5%, and ≈ 0% by mass, respectively.

Results

Samples from eight bovine femoral heads were tested under a sinusoidal load. Storage stiffness was lower on the lower substrate density. Storage stiffness, though, increased as cartilage samples were dehydrated from a water content of 76% to 8.5%; decreasing again as the water content was further reduced. Loss stiffness was lower on a lower density substrate and decreased as the water content decreased.

Conclusions

In conclusions, a decrease in hydration decreases the loss stiffness, but a non-linear relationship between hydration and storage stiffness may exist. Additionally, higher BMD values led to greater storage and loss stiffnesses.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12891-022-05169-0.

Subchondral bone plate thickness is associated with micromechanical and microstructural changes in the bovine patella osteochondral junction with different levels of cartilage degeneration

The influence of joint degeneration on the biomechanical properties of calcified cartilage and subchondral bone plate at the osteochondral junction is relatively unknown. Common experimental difficulties include accessibility to and visualization of the osteochondral junction, application of mechanical testing at the appropriate length scale, and availability of tissue that provides a consistent range of degenerative changes. This study addresses these challenges. A well-established bovine patella model of early joint degeneration was employed, in which micromechanical testing of fully hydrated osteochondral sections was carried out in conjunction with high-resolution imaging using differential interference contrast (DIC) optical light microscopy. A total of forty-two bovine patellae with different grades of tissue health ranging from healthy to mild, moderate, and severe cartilage degeneration, were selected. From the distal-lateral region of each patella, two adjacent osteochondral sections were obtained for the mechanical testing and the DIC imaging, respectively. Mechanical testing was carried out using a robotic micro-force acquisition system, applying compression tests over an array (area: 200 μm × 1000 μm, step size: 50 μm) across the osteochondral junction to obtain a stiffness map. Morphometric analysis was performed for the DIC images of fully hydrated cryo-sections. The levels of cartilage degeneration, DIC images, and the stiffness maps were used to associate the mechanical properties onto the specific tissue regions of cartilage, calcified cartilage, and subchondral bone plate. The results showed that there were up to 20% and 24% decreases (p < 0.05) in the stiffness of calcified cartilage and subchondral bone plate, respectively, in the severely degenerated group compared to the healthy group. Furthermore, there were increases (p < 0.05) in the number of tidemarks, bone spicules at the cement line, and the mean thickness of the subchondral bone plate with increasing levels of degeneration. The decreasing stiffness in the subchondral bone plate coupled with the presence of bone spicules may be indicative of a subchondral remodeling process involving new bone formation. Moreover, the mean thickness of the subchondral bone plate was found to be the strongest indicator of mechanical and associated structural changes in the osteochondral joint tissues.

High-performance bilayer composites for the replacement of osteochondral defects

Two novel bilayer constructs for the repair of osteochondral defects were developed from nanofibers and ceramic particles embedded into PVA matrices, exhibiting multiple promising properties similar to those of corresponding natural tissues.

Mechanical testing of cephalomedullary nail lag screws after the addition of hydroxyapatite substitutes

OBJECTIVE

To compare the effects of 3 implant designs, with and without hydroxyapatite reinforcement, on push/pull-out strength and rotational torque.

METHODS

Three implant designs (Gamma 3, INTERTAN, and PFNA-II) were selected for comparison. A hydroxyapatite cylinder (NEOBRACE) was used to reinforce the interface between the femoral head and the lag screw. Maximum push-out strength, maximum pull-out strength, and peak rotational torque were measured in cellular blocks mimicking osteoporotic cancellous bone, with and without NEOBRACE.

RESULTS

In the push-out test, INTERTAN produced a significantly higher push-out strength in osteoporotic bone density cellular blocks than the other lag screws and blades (P < .05). With the addition of NEOBRACE, push-out strength was significantly higher for INTERTAN and PFNA-II (P < .05) than for the non-NEOBRACE group. In the pull-out test, INTERTAN produced a significantly higher pull-out strength in the osteoporotic bone density cellular blocks than did the other lag screws and blades (P < .05). With the addition of NEOBRACE, the pull-out strengths of INTERTAN and Gamma 3 versus those of the non-NEOBRACE group significantly increased (P < .05). In the rotational torque test, INTERTAN produced significantly greater rotational torque in the osteoporotic cellular blocks than the other lag screws and blades (P < .05). The addition of NEOBRACE resulted in a significant increase in rotational torque only for INTERTAN (P < .05).

CONCLUSION

The use of NEOBRACE supported an increase in push/pull-out strength and rotational torque, especially in systems with a relatively increased bone or implant interface area.Level of Evidence: Level V.

Subchondral bone microarchitecture and mineral density in human osteoarthritis and osteoporosis: A regional and compartmental analysis

Osteoarthritis (OA) and osteoporosis (OP) are historically considered to be inversely correlated but there may be an overlap between the pathophysiology of the two diseases. This study aimed to investigate the subchondral bone microarchitecture and matrix mineralization, and the association between them in OA and OP in relation to the degree of cartilage degeneration. Fifty-six osteochondral plugs were collected from 16 OA femoral heads. They were graded on a regional basis according to the stages of cartilage degeneration, as evaluated by a new macroscopic and a modified microscopic grading system. Twenty-one plugs were collected from seven femoral heads with OP. Plugs were scanned by microcomputed tomography and the microarchitectural and mineral properties were obtained for both subchondral plate and trabecular bone. Microarchitecture and material and apparent densities of subchondral bone in OP were similar to regions with early cartilage degeneration but different from regions with advanced cartilage degradation in OA femoral heads. Subchondral trabecular bone was more mineralized than subchondral plate in both OP and OA, and this compartmental difference varied by severity of cartilage degradation. Furthermore, the relationship among trabecular bone volume fraction, tissue mineral density, and apparent bone density was similar in OP and different stages of OA. Subchondral bone microarchitecture and mineral properties in OP are different from OA in a regionalized manner in relation to stages of cartilage degeneration. Both regional and compartmental differences at structural, material, and cellular levels need to be studied to understand the transition of OA subchondral bone from being osteoporotic to sclerotic.

Knee Intraosseous Injections: A Systematic Review of Clinical Evidence of Different Treatment Alternatives

OBJECTIVE

To systematically review the available clinical evidence regarding the safety and efficacy of knee intraosseous injections for the treatment of bone marrow lesions in patients affected by knee osteoarthritis.

DESIGN

A literature search was carried out on PubMed, Embase, and Google Scholar databases in January 2020. The following inclusion criteria were adopted: (1) studies of any level of evidence, dealing with subchondral injection of bone substitute materials and/or biologic agents; (2) studies with minimum 5 patients treated; and (3) studies with at least 6 months' follow-up evaluation. All relevant data concerning clinical outcomes, adverse events, and rate of conversion to arthroplasty were extracted.

RESULTS

A total of 12 studies were identified: 7 dealt with calcium phosphate administration, 3 with platelet-rich plasma, and 2 with bone marrow concentrate injection. Only 2 studies were randomized controlled trials, whereas 6 studies were prospective and the remaining 4 were retrospective. Studies included a total of 459 patients treated with intraosseous injections. Overall, only a few patients experienced adverse events and clinical improvement was documented in the majority of trial. The lack of any comparative evaluation versus subchondral drilling alone is the main limitation of the available evidence.

CONCLUSIONS

Knee intraosseous injections are a minimally invasive and safe procedure to address subchondral bone damage in osteoarthritic patients. They are able to provide beneficial effects at short-term evaluation. More high-quality evidence is needed to confirm their potential and to identify the best product to adopt in clinical practice.

Observation of Solute Transport between Articular Cartilage and Subchondral Bone in Live Mice

OBJECTIVE

To establish a method for investigating the permeability of calcified cartilage zone (CCZ) and to observe solute transport between articular cartilage (AC) and subchondral bone (SB) through intact CCZ in vivo.

DESIGN

We developed a novel fixing device combined with un-decalcified fluorescence observation method to address the permeability of CCZ in live mice. Twenty-four Balb/c female mice aged 1 to 8 months were used to observe the development of CCZ. Eighty-four Balb/c female mice (aged 1 or 6 months) with mature or immature CCZ of distal femur were used to investigate the permeability of intact CCZ in vivo. Diffusivity of rhodamine B (476 Da) and tetramethyl-rhodamine isothicyanate-dextran (TRITC-Dextran, 20 kDa) was tested from AC to SB in 0 minutes, 1 minute, 15 minutes, 30 minutes, 1 hour, and 2 hours. None diffused knee joints (0 minutes) served as blank control, while in vitro immersion of distal femurs in rhodamine B or TRITC-Dextran for 72 hours served as positive control.

RESULTS

CCZ was well developed in 6-month mice. Both tracers penetrated immature CCZ down to SB in less than 1 hour in live mice, while the diffusion of both tracers decreased rapidly at tidemark in all testing time points.

CONCLUSION

Current study provided direct evidence of blocking effect of CCZ in solute transportation during short diffusion period in live animal, indicating the important role of CCZ in joint development and microenvironment maintenance.

Early Alterations of Subchondral Bone in the Rat Anterior Cruciate Ligament Transection Model of Osteoarthritis

OBJECTIVE

Advances in research have shown that the subchondral bone plays an important role in the propagation of cartilage loss and progression of osteoarthritis (OA), but whether the subchondral bone changes precede or lead to articular cartilage loss remains debatable. In order to elucidate the subchondral bone and cartilage changes that occur in early OA, an experiment using anterior cruciate ligament transection (ACLT) induced posttraumatic OA model of the rat knee was conducted.

DESIGN

Forty-two Sprague Dawley rats were divided into 2 groups: the ACLT group and the nonoperated control group. Surgery was conducted on the ACLT group, and subsequently rats from both groups were sacrificed at 1, 2, and 3 weeks postsurgery. Subchondral bone was evaluated using a high-resolution peripheral quantitative computed tomography scanner, while cartilage was histologically evaluated and scored.

RESULTS

A significant reduction in the subchondral trabecular bone thickness and spacing was found as early as 1 week postsurgery in ACLT rats compared with the nonoperated control. This was subsequently followed by a reduction in bone mineral density and bone fractional volume at week 2, and finally a decrease in the trabecular number at week 3. These changes occurred together with cartilage degeneration as reflected by an increasing Mankin score over all 3 weeks.

CONCLUSIONS

Significant changes in subchondral bone occur very early in OA concurrent with surface articular cartilage degenerative change suggest that factors affecting bone remodeling and resorption together with cartilage matrix degradation occur very early in the disease.

Differences between 3D isovoxel fat suppression VIBE MRI and CT models of proximal femur osseous anatomy: A preliminary study for bone tumor resection planning

Purpose

To evaluate the osseous anatomy of the proximal femur extracted from a 3D-MRI volumetric interpolated breath-hold (VIBE) sequence using either a Dixon or water excitation (WE) fat suppression method, and to measure the overall difference using CT as a reference standard.

Material and methods

This retrospective study reviewed imaging of adult patients with hip pain who underwent 3D hip MRI and CT. A semi-automatically segmented CT model served as the reference standard, and MRI segmentation was performed manually for each unilateral hip joint. The differences between Dixon-VIBE-3D-MRI vs. CT, and WE-VIBE-3D-MRI vs. CT, were measured. Equivalence tests between Dixon-VIBE and WE-VIBE models were performed with a threshold of 0.1 mm. Bland–Altman plots and Lin’s concordance-correlation coefficient were used to analyze the agreement between WE and Dixon sequences. Subgroup analyses were performed for the femoral head/neck, intertrochanteric, and femoral shaft areas.

Results

The mean and maximum differences between Dixon-VIBE-3D-MRI vs. CT were 0.2917 and 3.4908 mm, respectively, whereas for WE-VIBE-3D-MRI vs. CT they were 0.3162 and 3.1599 mm. The mean differences of the WE and Dixon methods were equivalent (P = 0.0292). However, the maximum difference was not equivalent between the two methods and it was higher in WE method. Lin’s concordance-correlation coefficient showed poor agreement between Dixon and WE methods. The mean differences between the CT and 3D-MRI models were significantly higher in the femoral shaft area (P = 0.0004 for WE and P = 0.0015 for Dixon) than in the other areas. The maximum difference was greatest in the intertrochanteric area for both techniques.

Conclusion

The difference between 3D-MR and CT models were acceptable with a maximal difference below 3.5mm. WE and Dixon fat suppression methods were equivalent. The mean difference was highest at the femoral shaft area, which was off-center from the magnetization field.

Fatigue behavior of subchondral bone under simulated physiological loads of equine athletic training

Fatigue-induced subchondral bone (SCB) injuries are prevalent among athletes due to the repetitive application of high magnitude loads on joints during intense physical training. Existing fatigue studies on bone utilize a standard fatigue test approach by applying loads of a constant magnitude and frequency even though physiological/realistic loading is a combination of various load magnitudes and frequencies. Metal materials in implant and aerospace applications have been studied for fatigue behavior under physiological or realistic loading, however, no such study has been conducted on biological materials like bones. In this study, we investigated fatigue behavior of SCB under the range of loads likely to occur during a fast-workout of an equine athlete in training. A loading protocol was developed by simulating physiological loads occurring during a fast-workout of a racehorse in training, which consisted of a sequence of compression-compression load cycles, including a warm-up (32, 54, 61 MPa) and cool-down (61, 54, 32 MPa) before and after the slow/fast/slow gallop phase of training, also referred to as a training loop. This loading protocol/training loop was applied at room temperature in load-control mode to cylindrical SCB specimens (n = 12) harvested from third metacarpal medial condyles (MCIII) of twelve thoroughbred racehorses and repeated until fatigue failure. The mean ± standard deviation for total time-to-failure (TTF) was 76,393 ± 64,243 s (equivalent to 18.3 ± 15.7 training workouts) for n = 12 specimens. We observed the highest relative energy loss (REL, hysteresis loss normalized to energy absorbed in a load cycle) under loads equivalent to gallop speeds and all specimens failed under these gallop loads. This demonstrates the importance of the gallop speeds in the development of SCB injury, consistent with observations made in live racehorses. Moreover, specimens with higher mean REL and lower mean stiffness during the first loop had a shorter fatigue life which further confirms the detrimental effect of high energy loss in SCB. Further studies are required to reconcile our results with fatigue injuries among equine athletes and understand the influence of different training programs on the fatigue behavior of subchondral bone.

Altered topological blueprint of trabecular bone associates with skeletal pathology in humans

Bone is a hierarchically organized biological material, and its strength is usually attributed to overt factors such as mass, density, and composition. Here we investigate a covert factor – the topological blueprint, or the network organization pattern of trabecular bone. This generally conserved metric of an edge-and-node simplified presentation of trabecular bone relates to the average coordination/valence of nodes and the equiangular 3D offset of trabeculae emanating from these nodes. We compare the topological blueprint of trabecular bone in presumably normal, fractured osteoporotic, and osteoarthritic samples (all from human femoral head, cross-sectional study). We show that bone topology is altered similarly in both fragility fracture and in joint degeneration. Decoupled from the morphological descriptors, the topological blueprint subjected to simulated loading associates with an abnormal distribution of strain, local stress concentrations and lower resistance to the standardized load in pathological samples, in comparison with normal samples. These topological effects show no correlation with classic morphological descriptors of trabecular bone. The negative effect of the altered topological blueprint may, or may not, be partly compensated for by the morphological parameters. Thus, naturally occurring optimization of trabecular topology, or a lack thereof in skeletal disease, might be an additional, previously unaccounted for, contributor to the biomechanical performance of bone, and might be considered as a factor in the life-long pathophysiological trajectory of common bone ailments.

•

Mechanical performance of the skeleton results from many factors and their interplay.

•

Topological blueprint as a basic trabecular design plan is an understudied factor.

•

Topological blueprint deviation undermines mechanical properties of trabecular bone.

•

Higher bone mass or thicker trabeculae do not compensate for deviant topology.

Use of Computational Modeling to Study Joint Degeneration: A Review

Osteoarthritis (OA), a degenerative joint disease, is the most common chronic condition of the joints, which cannot be prevented effectively. Computational modeling of joint degradation allows to estimate the patient-specific progression of OA, which can aid clinicians to estimate the most suitable time window for surgical intervention in osteoarthritic patients. This paper gives an overview of the different approaches used to model different aspects of joint degeneration, thereby focusing mostly on the knee joint. The paper starts by discussing how OA affects the different components of the joint and how these are accounted for in the models. Subsequently, it discusses the different modeling approaches that can be used to answer questions related to OA etiology, progression and treatment. These models are ordered based on their underlying assumptions and technologies: musculoskeletal models, Finite Element models, (gene) regulatory models, multiscale models and data-driven models (artificial intelligence/machine learning). Finally, it is concluded that in the future, efforts should be made to integrate the different modeling techniques into a more robust computational framework that should not only be efficient to predict OA progression but also easily allow a patient’s individualized risk assessment as screening tool for use in clinical practice.

In situ characterization of nanoscale strains in loaded whole joints via synchrotron X-ray tomography

Imaging techniques for quantifying how the hierarchical structure of deforming joints changes are constrained by destructive sample treatments, sample-size restrictions and lengthy scan times. Here, we report the use of fast, low-dose pink-beam synchrotron X-ray tomography combined with mechanical loading at nanometric precision for the in situ imaging, at resolutions lower than 100 nm, of mechanical strain in intact untreated joints under physiologically realistic conditions. We show that, in young, aged, and osteoarthritic mice, hierarchical changes in tissue structure and mechanical behaviour can be simultaneously visualized, and that tissue structure at the cellular level correlates with whole-joint mechanical performance. We also used the tomographic approach to study the co-localization of tissue strains to specific chondrocyte lacunar organizations within intact loaded joints, and for the exploration of the role of calcified-cartilage stiffness on the biomechanics of healthy and pathological joints.

Subchondral bone deterioration in femoral heads in patients with osteoarthritis secondary to hip dysplasia: A case-control study

Objectives

Residual hip dysplasia is the most common underlying condition leading to secondary osteoarthritis (OA) of the hip. Subchondral bone alterations in OA secondary to hip dysplasia (HD-OA) are poorly investigated. The aim of the present study was to analyse the microarchitecture, bone remodelling and pathological alterations of subchondral bone in femoral heads from patients with HD-OA.

Methods

Subchondral bone specimens were extracted from both weight-bearing and non–weight-bearing regions of femoral heads from 20 patients with HD-OA and 20 patients with osteoporotic femoral neck fracture, during hip replacement surgery. Micro-CT and histological examination were performed to assess the microarchitecture and histopathological changes.

Results

The weight-bearing subchondral bone showed significantly more sclerotic microarchitecture and higher bone remodelling level in HD-OA as compared with osteoporosis. In the non–weight-bearing region, the two diseases shared similar microarchitectural characteristics, but higher bone remodelling level was detected in HD-OA. Distinct regional differences were observed in HD-OA, whereas the two regions exhibited similar characteristics in osteoporosis. In addition, HD-OA displayed more serious pathological alterations, including subchondral bone cyst, metaplastic cartilaginous tissue, bone marrow oedema and fibrous tissue, especially in the weight-bearing region.

Conclusions

Osteoarthritic deteriorations of subchondral bone induced by hip dysplasia spread throughout the whole joint, but exhibit region-dependent variations, with the weight-bearing region more seriously affected. Biomechanical stress might exert a pivotal impact on subchondral bone homeostasis in hip dysplasia.

The translational potential of this article

The histomorphometric findings in the project indicate an early intervention for the development of hip dysplasia in clinic.

How To Build a Bone: PHOSPHO1, Biomineralization, and Beyond

Since its characterization two decades ago, the phosphatase PHOSPHO1 has been the subject of an increasing focus of research. This work has elucidated PHOSPHO1's central role in the biomineralization of bone and other hard tissues, but has also implicated the enzyme in other biological processes in health and disease. During mineralization PHOSPHO1 liberates inorganic phosphate (P_i) to be incorporated into the mineral phase through hydrolysis of its substrates phosphocholine (PCho) and phosphoethanolamine (PEA). Localization of PHOSPHO1 within matrix vesicles allows accumulation of P_i within a protected environment where mineral crystals may nucleate and subsequently invade the organic collagenous scaffold. Here, we examine the evidence for this process, first discussing the discovery and characterization of PHOSPHO1, before considering experimental evidence for its canonical role in matrix vesicle–mediated biomineralization. We also contemplate roles for PHOSPHO1 in disorders of dysregulated mineralization such as vascular calcification, along with emerging evidence of its activity in other systems including choline synthesis and homeostasis, and energy metabolism. © 2019 The Authors. JBMR Plus published by Wiley Periodicals, Inc. on behalf of American Society for Bone and Mineral Research.

PLGA scaffold carrying icariin to inhibit the progression of osteoarthritis in rabbits

Icariin, the main effective component extracted from epimedium, has been shown to stimulate osteogenic differentiation and bone formation and to increase synthesis of the cartilage extracellular matrix. However, there has been little study on the effects of icariin on osteoarthritis. In this study, we loaded icariin onto poly(lactic-co-glycolic acid) (PLGA) electrospinning. The aim of this study was to explore a composite scaffold and to inhibit the progression of osteoarthritis. Our main experimental results demonstrated that the PLGA/icariin composite spinning scaffold had higher hydrophilicity, and icariin was released slowly and steadily from the scaffold. According to the results of an MTT test, immunofluorescence staining, an alkaline phosphate activating assay and a real-time polymerase chain reaction (RT-PCR) assay, the PLGA/icariin composite scaffold had good biocompatibility. In models of osteoarthritis, the results of a RT-PCR assay indicated that the PLGA/icariin scaffold promoted the synthesis of the extracellular matrix. The results of X-ray microtomography and histological evaluation demonstrated that the PLGA/icariin scaffold maintained the functional morphology of articular cartilage and inhibited the resorption of subchondral bone trabeculae. These findings indicated that the PLGA and icariin composite scaffold has therapeutic potential for use in the treatment of osteoarthritis.

Longitudinal changes in subchondral bone structure as assessed with MRI are associated with functional outcome after high tibial osteotomy

OBJECTIVES

The primary objective of this study was to evaluate the effects of high tibial osteotomy (HTO) on subchondral bone structure assessed with magnetic resonance (MR)-based trabecular bone imaging and the correlations of these effects with functional outcome and clinical symptoms.

METHODS

Patients with varus malalignment (6.2±2.2°) and without a history of knee surgery (n=22; 3 women; 48.7±10.3 years) were included into this prospective study. 1.5T MR imaging was performed before and on average 1.5 years after HTO (amount of correction 4.7±2.5°) and histomorphometric parameters of the trabecular bone were calculated for the medial/ lateral tibia and femur. Functional outcome was assessed with validated scores focusing on sports activity including the Lysholm Score, Tegner Activity Scale and the adapted Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) Score.

RESULTS

Apparent trabecular number significantly decreased in all compartments of the tibiofemoral joint when comparing values before and on average 1.5 years after HTO (P<0.05 for all). Decrease in apparent trabecular number was significantly higher within the medial tibia compared to the lateral compartment (mean difference -0.24 mm^-1 (95% confidence interval (CI): -0.33, -0.14 mm^-1); P<0.001). Apparent trabecular bone thickness significantly increased within 1.5 years after HTO in the lateral femur (P=0.002) and tibia (P <0.001). The Lysholm Score and Tegner Scale demonstrated an improvement of functional outcome, and the adapted WOMAC demonstrated an improvement of pain, stiffness and physical function within 1.5 years after HTO (P<0.01), with the improvement of WOMAC correlating significantly with changes in trabecular bone thickness within the medial tibia (r= -0.48; P=0.01).

CONCLUSION

These findings indicate a reversal of the previous subchondral bone alterations in patients with varus malalignment after undergoing HTO, while pronounced subchondral changes were associated with a better functional outcome.

LEVEL OF EVIDENCE

3.

Interleukin-6 from subchondral bone mesenchymal stem cells contributes to the pathological phenotypes of experimental osteoarthritis

As a main cause of morbidity in the aged population, osteoarthritis (OA) is characterized by cartilage destruction, synovium inflammation, osteophytes, and subchondral bone sclerosis. To date its etiology remains elusive. Recent data highlight an important role of subchondral bone in the onset and progression of OA. Therefore, elucidating the mechanisms underlying abnormal subchondral bone could be of importance in the treatment of OA. Interleukin-6 is a proinflammatory cytokine involved in many physiological and pathological processes. Although in vitro and in vivo studies have indicated that IL-6 is an important cytokine in the physiopathogenesis of OA, its effects on subchondral bone have not been studied in OA animal models. In this study, we aimed to i) investigate the role of IL-6 in the pathological phenotypes of OA subchondral bone MSCs including increase in cell numbers, mineralization disorder and abnormal type I collagen production; ii) explore whether the systemic blockade of IL-6 signaling could alleviate the pathological phenotypes of experimental OA. We found that IL-6 was over-secreted by OA subchondral bone MSCs compared with normal MSCs and IL-6/STAT3 signaling was over-activated in subchondral bone MSCs, which contributed to the pathological phenotypes of OA subchondral bone MSCs. More importantly, systemic inhibition of IL-6/STAT3 signaling with IL-6 antibody or STAT3 inhibitor AG490 decreased the severity of pathological phenotypes of OA subchondral bone MSCs and cartilage lesions in OA. Our findings provide strong evidence for a pivotal role for IL-6 signaling in OA and open up new therapeutic perspectives.

Osseointegration of porous apatite-wollastonite and poly(lactic acid) composite structures created using 3D printing techniques

A novel apatite-wollastonite/poly(lactic acid) (AW/PLA) composite structure, which matches cortical and cancellous bone properties has been produced and evaluated in vitro and in vivo. The composites structure has been produced using an innovative combination of 3D printed polymer and ceramic macrostructures, thermally bonded to create a hybrid composite structure. In vitro cell assays demonstrated that the AW structure alone, PLA structure alone, and AW/PLA composite were all biocompatible, with the AW structure supporting the proliferation and osteogenic differentiation of rat bone marrow stromal cells. Within a rat calvarial defect model the AW material showed excellent osseointegration with the formation of new bone, and vascularisation of the porous AW structure, both when the AW was implanted alone and when it was part of the AW/PLA composite structure. However, the AW/PLA structure showed the largest amount of the newly formed bone in vivo, an effect which is considered to be a result of the presence of the osteoinductive AW structure stimulating bone growth in the larger pores of the adjacent PLA structure. The layered AW/PLA structure showed no signs of delamination in any of the in vitro or in vivo studies, a result which is attributed to good initial bonding between polymer and ceramic, slow resorption rates of the two materials, and excellent osseointegration. It is concluded that macro-scale composites offer an alternative route to the fabrication of bioactive bone implants which can provide a match to both cortical and cancellous bone properties over millimetre length scales.

Electromechanical properties of human osteoarthritic and asymptomatic articular cartilage are sensitive and early detectors of degeneration

OBJECTIVE

To evaluate cross-correlations of ex vivo electromechanical properties with cartilage and subchondral bone plate thickness, as well as their sensitivity and specificity regarding early cartilage degeneration in human tibial plateau.

METHOD

Six pairs of tibial plateaus were assessed ex vivo using an electromechanical probe (Arthro-BST) which measures a quantitative parameter (QP) reflecting articular cartilage compression-induced streaming potentials. Cartilage thickness was then measured with an automated thickness mapping technique using Mach-1 multiaxial mechanical tester. Subsequently, a visual assessment was performed by an experienced orthopedic surgeon using the International Cartilage Repair Society (ICRS) grading system. Each tibial plateau was finally evaluated with μCT scanner to determine the subchondral-bone plate thickness over the entire surface.

RESULTS

Cross-correlations between assessments decreased with increasing degeneration level. Moreover, electromechanical QP and subchondral-bone plate thickness increased strongly with ICRS grade (ρ = 0.86 and ρ = 0.54 respectively), while cartilage thickness slightly increased (ρ = 0.27). Sensitivity and specificity analysis revealed that the electromechanical QP is the most performant to distinguish between different early degeneration stages, followed by subchondral-bone plate thickness and then cartilage thickness. Lastly, effect sizes of cartilage and subchondral-bone properties were established to evaluate whether cartilage or bone showed the most noticeable changes between normal (ICRS 0) and each early degenerative stage. Thus, the effect sizes of cartilage electromechanical QP were almost twice those of the subchondral-bone plate thickness, indicating greater sensitivity of electromechanical measurements to detect early osteoarthritis.

CONCLUSION

The potential of electromechanical properties for the diagnosis of early human cartilage degeneration was highlighted and supported by cartilage thickness and μCT assessments.

Gradient nano-engineered in situ forming composite hydrogel for osteochondral regeneration

Fabrication of anisotropic osteochondral-mimetic scaffold with mineralized subchondral zone and gradient interface remains challenging. We have developed an injectable semi-interpenetrating network hydrogel construct with chondroitin sulfate nanoparticles (ChS-NPs) and nanohydroxyapatite (nHA) (∼30-90 nm) in chondral and subchondral hydrogel zones respectively. Mineralized subchondral hydrogel exhibited significantly higher osteoblast proliferation and alkaline phosphatase activity (p < 0.05). Osteochondral hydrogel exhibited interconnected porous structure and spatial variation with gradient interface of nHA and ChS-NPs. Microcomputed tomography (μCT) demonstrated nHA gradation while rheology showed predominant elastic modulus (∼930 Pa) at the interface. Co-culture of osteoblasts and chondrocytes in gradient hydrogels showed layer-specific retention of cells and cell-cell interaction at the interface. In vivo osteochondral regeneration by biphasic (nHA or ChS) and gradient (nHA + ChS) hydrogels was compared with control using rabbit osteochondral defect after 3 and 8 weeks. Complete closure of defect was observed in gradient (8 weeks) while defect remained in other groups. Histology demonstrated collagen and glycosaminoglycan deposition in neo-matrix and presence of hyaline cartilage-characteristic matrix, chondrocytes and osteoblasts. μCT showed mineralized neo-tissue formation, which was confined within the defect with higher bone mineral density in gradient (chondral: 0.42 ± 0.07 g/cc, osteal: 0.64 ± 0.08 g/cc) group. Further, biomechanical push-out studies showed significantly higher load for gradient group (378 ± 56 N) compared to others. Thus, the developed nano-engineered gradient hydrogel enhanced hyaline cartilage regeneration with subchondral bone formation and lateral host-tissue integration.

Subchondral Trabecular Rod Loss and Plate Thickening in the Development of Osteoarthritis

Developing effective treatment for osteoarthritis (OA), a prevalent and disabling disease, has remained a challenge, primarily because of limited understanding of its pathogenesis and late diagnosis. In the subchondral bone, rapid bone loss after traumatic injuries and bone sclerosis at the advanced stage of OA are well-recognized hallmarks of the disease. Recent studies have further demonstrated the crucial contribution of subchondral bone in the development of OA. However, the microstructural basis of these bone changes has not been examined thoroughly, and the paradox of how abnormal resorption can eventually lead to bone sclerosis remains unanswered. By applying a novel microstructural analysis technique, individual trabecula segmentation (ITS), to micro-computed tomography (μCT) images of human OA knees, we have identified a drastic loss of rod-like trabeculae and thickening of plate-like trabeculae that persisted in all regions of the tibial plateau, underneath both severely damaged and still intact cartilage. The simultaneous reduction in trabecular rods and thickening of trabecular plates provide important insights to the dynamic and paradoxical subchondral bone changes observed in OA. Furthermore, using an established guinea pig model of spontaneous OA, we discovered similar trabecular rod loss and plate thickening that preceded cartilage degradation. Thus, our study suggests that rod-and-plate microstructural changes in the subchondral trabecular bone may play an important role in the development of OA and that advanced microstructural analysis techniques such as ITS are necessary in detecting these early but subtle changes. With emerging high-resolution skeletal imaging modalities such as the high-resolution peripheral quantitative computed tomography (HR-pQCT), trabecular rod loss identified by ITS could potentially be used as a marker in assessing the progression of OA in future longitudinal studies or clinical diagnosis. © 2017 American Society for Bone and Mineral Research.

Effect of bisphosphonates on knee replacement surgery

PURPOSE

Bone remodelling as a therapeutic target in knee osteoarthritis (OA) has gained much interest, but the effects of antiresorptive agents on knee OA have been conflicting, with no studies to date examining the effects of bisphosphonate use on the clinically relevant endpoint of knee replacement (KR) surgery.

METHODS

We used data from The Health Improvement Network (THIN), a general practitioner electronic medical records representative of the general UK population. We identified older women who had initiated bisphosphonate use after their incident knee OA diagnosis. Each bisphosphonate initiator was propensity score-matched with a non-initiator within each 1-year cohort accrual block. The effect of bisphosphonates on the risk of KR was assessed using Cox proportional hazard regression. Sensitivity analyses to address residual confounding were also conducted.

RESULTS

We identified 2006 bisphosphonate initiators, who were matched to 2006 non-initiators(mean age 76, mean body mass index 27), with mean follow-up time of 3 years. The crude incidence rate of KR was 22.0 per 1000 person-years among the initiators, and 29.1 among the non-initiators. Bisphosphonate initiators had 26% lower risk of KR than non-initiators(HR 0.74, 95% CI 0.59 to 0.93); these results were similar when additionally adjusted for potential confounders in the propensity score (HR 0.76, 95% CI 0.60 to 0.95). Results of sensitivity analyses supported this protective effect.

CONCLUSIONS

In this population-based cohort of older women with incident knee OA, those with incident bisphosphonate users had lower risk of KR than non-users of bisphosphonates, suggesting a potential beneficial effect of bisphosphonates on knee OA.

Do immune cells lead the way in subchondral bone disturbance in osteoarthritis?

Osteoarthritis (OA) is a whole-joint disorder, and non-cartilage articular pathologies, e.g. subchondral bone disturbance, contribute substantially to the onset and progression of the disease. In the early stage of OA, abnormal mechanical loading leads to micro-cracks or micro-fractures that trigger a reparative process with angiogenesis and inflammatory response. With the progression of disease, cystic lesion, sclerosis and osteophytosis occur at tissue level, and osteoblast dysfunction at cellular level. Osteoblasts derived from OA sclerotic bone produce increased amount of type I collagen with aberrant Col1A1/A2 ratio and poor mineralization capability. The coupling mechanism of bone resorption with formation is also impaired with elevated osteoclastic activities. All these suggest a view that OA subchondral bone presents a defective fracture repair process in a chronic course. It has been found that T and B cells, the major effectors in the adaptive immunity, take part in the hard callus formation at fracture site in addition to the initial phase of haematoma and inflammation. Infiltration of lymphocytes could interplay with osteoclasts and osteoblasts via a direct physical cell-to-cell contact. Several lines of evidence have consistently shown the involvement of T and B cells in osteoclastogenesis and bone erosion in arthritic joints. Yet the biological link between immune cells and osteoblastic function remains ambiguous. This review will discuss the current knowledge regarding the role of immune cells in bone remodelling, and address its implications in emerging basic and clinical investigations into the pathogenesis and management of subchondral bone pathologies in OA.

The inferomedial femoral neck is compromised by age but not disease: Fracture toughness and the multifactorial mechanisms comprising reference point microindentation

The influence of ageing on the fracture mechanics of cortical bone tissue is well documented, though little is known about if and how related material properties are further affected in two of the most prominent musculoskeletal diseases, osteoporosis and osteoarthritis (OA). The femoral neck, in close proximity to the most pertinent osteoporotic fracture site and near the hip joint affected by osteoarthritis, is a site of particular interest for investigation. We have recently shown that Reference Point micro-Indentation (RPI) detects differences between cortical bone from the femoral neck of healthy, osteoporotic fractured and osteoarthritic hip replacement patients. RPI is a new technique with potential for in vivo bone quality assessment. However, interpretation of RPI results is limited because the specific changes in bone properties with pathology are not well understood and, further, because it is not conclusive what properties are being assessed by RPI. Here, we investigate whether the differences previously detected between healthy and diseased cortical bone from the femoral neck might reflect changes in fracture toughness. Together with this, we investigate which additional properties are reflected in RPI measures. RPI (using the Biodent device) and fracture toughness tests were conducted on samples from the inferomedial neck of bone resected from donors with: OA (41 samples from 15 donors), osteoporosis (48 samples from 14 donors) and non age-matched cadaveric controls (37 samples from 10 donoros) with no history of bone disease. Further, a subset of indented samples were imaged using micro-computed tomography (3 osteoporotic and 4 control samples each from different donors) as well as fluorescence microscopy in combination with serial sectioning after basic fuchsin staining (7 osteoporotic and 5 control samples from 5 osteoporotic and 5 control donors). In this study, the bulk indentation and fracture resistance properties of the inferomedial femoral neck in osteoporotic fracture, severe OA and control bone were comparable (p > 0.05 for fracture properties and <10% difference for indentation) but fracture toughness reduced with advancing age (7.0% per decade, r = -0.36, p = 0.029). Further, RPI properties (in particular, the indentation distance increase, IDI) showed partial correlation with fracture toughness (r = -0.40, p = 0.023) or derived elastic modulus (r = -0.40, p = 0.023). Multimodal indent imaging revealed evidence of toughening mechanisms (i.e. crack deflection, bridging and microcracking), elastoplastic response (in terms of the non-conical imprint shape and presence of pile-up) and correlation of RPI with damage extent (up to r = 0.79, p = 0.034) and indent size (up to r = 0.82, p < 0.001). Therefore, crack resistance, deformation resistance and, additionally, micro-structure (porosity: r = 0.93, p = 0.002 as well as pore proximity: r = -0.55, p = 0.027 for correlation with IDI) are all contributory to RPI. Consequently, it becomes clear that RPI measures represent a multitude of properties, various aspects of bone quality, but are not necessarily strongly correlated to a single mechanical property. In addition, osteoporosis or osteoarthritis do not seem to further influence fracture toughness of the inferomedial femoral neck beyond natural ageing. Since bone is highly heterogeneous, whether this finding can be extended to the whole femoral neck or whether it also holds true for other femoral neck quadrants or other material properties remains to be shown.

Alteration of Wnt5a expression and of the non-canonical Wnt/PCP and Wnt/PKC-Ca2+ pathways in human osteoarthritis osteoblasts

Objective

Clinical and in vitro studies suggest that subchondral bone sclerosis due to abnormal osteoblasts (Ob) is involved in the progression and/or onset of osteoarthritis (OA). Human Ob isolated from sclerotic subchondral OA bone tissue show an altered phenotype, a decreased canonical Wnt/β-catenin signaling pathway (cWnt), and a reduced mineralization in vitro. In addition to the cWnt pathway, at least two non-canonical signaling pathways, the Wnt/PKC and Wnt/PCP pathway have been described. However, there are no reports of either pathway in OA Ob. Here, we studied the two non-canonical pathways in OA Ob and if they influence their phenotype.

Methods

Human primary subchondral Ob were isolated from the subchondral bone plate of tibial plateaus of OA patients undergoing total knee arthroplasty, or of normal individuals at autopsy. The expression of genes involved in non-canonical Wnt signaling was evaluated by qRT-PCR and their protein production by Western blot analysis. Alkaline phosphatase activity and osteocalcin secretion (OC) were determined with substrate hydrolysis and EIA, respectively. Mineralization levels were evaluated with Alizarin Red Staining, Wnt/PKC and Wnt/PCP pathways by target gene expression and their respective activity using the NFAT and AP-1 luciferase reporter assays.

Results

OA Ob showed an altered phenotype as illustrated by an increased alkaline phosphatase activity and osteocalcin release compared to normal Ob. The expression of the non-canonical Wnt5a ligand was increased in OA Ob compared to normal. Whereas, the expression of LGR5 was significantly increased in OA Ob compared to normal Ob, the expression of LGR4 was similar. Wnt5a directly stimulated the expression and production of LGR5, contrasting, Wnt5a did not stimulate the expression of LGR4. Wnt5a also stimulated the phosphorylation of both JNK and PKC, as well as the activity of both NFAT and AP-1 transcription factors. The inhibition of Wnt5a expression partially corrects the abnormal mineralization, OC secretion and ALPase activity of OA Ob.

Conclusion

These data indicate that the alteration of Wnt5a, a non-canonical Wnt signaling activator, is implicated in the modified signalisation and phenotype observed in OA Ob.

Beneficial effect of resveratrol on phenotypic features and activity of osteoarthritic osteoblasts

Background

Osteoarthritis (OA) is a complex disease, which affects multiple tissues, namely the subchondral bone, articular cartilage and synovial membrane. Alterations of the subchondral bone include an increased, yet under mineralized osteoid matrix, abnormal osteoblast cell phenotype including elevated alkaline phosphatase (ALP) activity, increased release of osteocalcin (OC) and transforming growth factor β-1 (TGF-β1). Previous studies have demonstrated an inhibition of the canonical Wnt signaling (cWnt) pathway in OA osteoblasts (Ob). As resveratrol (RSV) has been shown to upregulate the Wnt signaling pathway in different cell systems, we hypothesized that RSV could be beneficial for OA Ob.

Method

We prepared primary human Ob using the subchondral bone plate of tibial plateaus of OA patients undergoing total knee arthroplasty, or tibial plateaus of normal individuals at autopsy. Sirtuin 1 (Sirt1) expression in normal and OA subchondral bone tissue was evaluated by immunohistochemical analysis. Expression of genes was evaluated by qRT-PCR and protein production by western blot analysis. ALP activity and osteocalcin secretion were evaluated respectively with substrate hydrolysis and enzyme immunoassay. Mineralization levels were evaluated with alizarin red staining. Wnt/β-catenin signaling was evaluated by target gene expression using the TOPflash TCF/lef luciferase reporter assay and intracellular signaling using β-catenin levels in western blot analysis. Extracellular signal-regulated kinase (Erk)1/2 and the Smad1/5/8 pathways were evaluated by western blot analysis.

Results

Sirt1 expression and production were reduced in OA subchondral bone tissue compared to normal tissue. RSV upregulated Sirt1 and its activity, and reduced the expression of leptin. RSV increased Erk1/2 phosphorylation in OA Ob; however, it had no effect on Smad 1/5/8 phosphorylation. RSV had little effect on cell proliferation and only slightly affected the Bax/Bcl2 ratio. The expression of Runx2/Cbfa1 and peroxisome proliferator-activated receptor (PPAR)γ were not affected by increasing doses of RSV. The endogenous increased ALP activity and OC release observed in OA Ob compared to normal Ob were partly corrected only for ALP at high RSV levels but not for OC release. In contrast, RSV increased the mineralization of OA Ob. Moreover, whereas Wnt3a stimulates the Wnt/β-catenin pathway in these cells, RSV further increased the response to Wnt3a.

Conclusion

These data indicate that RSV promotes Sirt1 levels, inhibits the endogenous expression of leptin by OA osteoblasts and can promote the Wnt/β-catenin and Erk1/2 signaling pathways, which are altered in these cells.

Effect of matrix stiffness on osteoblast functionalization

OBJECTIVES

Stiffness of bone tissue differs response to its physiological or pathological status, such as osteoporosis or osteosclerosis. Consequently, the function of cells residing in bone tissue including osteoblasts (OBs), osteoclasts and osteocytes will be affected. However, to the best of our knowledge, the detailed mechanism of how extracellular matrix stiffness affects OB function remains unclear.

MATERIALS AND METHODS

We conducted a study that exposed rat primary OBs to polydimethylsiloxane substrates with varied stiffness to investigate the alterations of cell morphology, osteoblastic differentiation and its potential mechanism in mechanotransduction.

RESULTS

Distinctive differences of cell shapes and vinculin expression in rat osteoblasts were detected on different PDMS substrates. As representatives for OB function, expression of alkaline phosphatase, Runx2 and osteocalcin were identified and showed a decrease trend as substrates become soft, which is associated with the Rho/ROCK signalling pathway.

CONCLUSIONS

Our results indicated substrate elasticity as a potent regulator in OBs functionalization, which may pave a way for further understanding of bone diseases as well as a potential therapeutic alternative in tissue regeneration.

Optimizing finite element predictions of local subchondral bone structural stiffness using neural network-derived density-modulus relationships for proximal tibial subchondral cortical and trabecular bone

BACKGROUND

Quantitative computed tomography based subject-specific finite element modeling has potential to clarify the role of subchondral bone alterations in knee osteoarthritis initiation, progression, and pain. However, it is unclear what density-modulus equation(s) should be applied with subchondral cortical and subchondral trabecular bone when constructing finite element models of the tibia. Using a novel approach applying neural networks, optimization, and back-calculation against in situ experimental testing results, the objective of this study was to identify subchondral-specific equations that optimized finite element predictions of local structural stiffness at the proximal tibial subchondral surface.

METHODS

Thirteen proximal tibial compartments were imaged via quantitative computed tomography. Imaged bone mineral density was converted to elastic moduli using multiple density-modulus equations (93 total variations) then mapped to corresponding finite element models. For each variation, root mean squared error was calculated between finite element prediction and in situ measured stiffness at 47 indentation sites. Resulting errors were used to train an artificial neural network, which provided an unlimited number of model variations, with corresponding error, for predicting stiffness at the subchondral bone surface. Nelder-Mead optimization was used to identify optimum density-modulus equations for predicting stiffness.

FINDINGS

Finite element modeling predicted 81% of experimental stiffness variance (with 10.5% error) using optimized equations for subchondral cortical and trabecular bone differentiated with a 0.5g/cm³ density.

INTERPRETATION

In comparison with published density-modulus relationships, optimized equations offered improved predictions of local subchondral structural stiffness. Further research is needed with anisotropy inclusion, a smaller voxel size and de-blurring algorithms to improve predictions.

Solute transport at the interface of cartilage and subchondral bone plate: Effect of micro-architecture

Cross-talk of subchondral bone and articular cartilage could be an important aspect in the etiology of osteoarthritis. Previous research has provided some evidence of transport of small molecules (~370Da) through the calcified cartilage and subchondral bone plate in murine osteoarthritis models. The current study, for the first time, uses a neutral diffusing computed tomography (CT) contrast agent (iodixanol, ~1550Da) to study the permeability of the osteochondral interface in equine and human samples. Sequential CT monitoring of diffusion after injecting a finite amount of contrast agent solution onto the cartilage surface using a micro-CT showed penetration of the contrast molecules across the cartilage-bone interface. Moreover, diffusion through the cartilage-bone interface was affected by thickness and porosity of the subchondral bone as well as the cartilage thickness in both human and equine samples. Our results revealed that porosity of the subchondral plate contributed more strongly to the diffusion across osteochondral interface compared to other morphological parameters in healthy equine samples. However, thickness of the subchondral plate contributed more strongly to the diffusion in slightly osteoarthritic human samples.

Osteoporosis and osteoarthritis: shared mechanisms and epidemiology

PURPOSE OF REVIEW

Osteoporosis and osteoarthritis are different diseases, with differences in risk factors, bone mineral density (BMD), BMI, phenotype, morbidity and mortality. We review new data on the role of bone metabolism in osteoporosis and osteoarthritis.

RECENT FINDINGS

The insights in the common convergent and divergent risk factors between osteoarthritis and osteoporosis have resulted in new findings on the role of BMD, BMI, falls, genetics and epigenetics in the pathophysiology of both diseases and on the increased fracture risk in osteoporosis and osteoarthritis. The relation between BMD, BMI and fracture risk in osteoarthritis is dependent on the stage, definition and location of the osteoarthritis and method of BMD measurement. It has been suggested that osteoarthritis should be further specified in terms of bone involvement.

SUMMARY

These new findings open the way to better understand the bone subtypes of osteoarthritis (osteoporotic, bone forming and erosive) and the common and different ways bone is involved in osteoporosis and osteoarthritis. Much can be expected from further prospective studies, when taking into account the heterogeneous nature of both osteoporosis and osteoarthritis.

Repair of cartilage defects in osteoarthritis rats with induced pluripotent stem cell derived chondrocytes

Background

The incapacity of articular cartilage (AC) for self-repair after damage ultimately leads to the development of osteoarthritis. Stem cell-based therapy has been proposed for the treatment of osteoarthritis (OA) and induced pluripotent stem cells (iPSCs) are becoming a promising stem cell source.

Results

Three steps were developed to differentiate human iPSCs into chondrocytes which were transplanted into rat OA models induced by monosodium iodoacetate (MIA). After 6 days embryonic body (EB) formation and 2 weeks differentiation, the gene and protein expression of Col2A1, GAG and Sox9 has significantly increased compare to undifferentiated hiPSCs. After 15 weeks transplantation, no immune responses were observed, micro-CT showed gradual engraftment and the improvement of subchondrol plate integrity, and histological examinations demonstrated articular cartilage matrix production.

Conclusions

hiPSC could be an efficient and clinically translatable approach for cartilage tissue regeneration in OA cartilages.