A red fluorescent carbon dots with good water solubility for rapid detection of Al3+ in actual samples

We developed a facile strategy for the fabrication of red fluorescent carbon nanodots (R-CDs) and demonstrated their applications for Al3+ sensing. Red-emission carbon dots (CDs) were synthesized using a simple hydrothermal treatment with citric acid and urea as precursors, manifesting intriguing red-emission behaviour at 610 nm. With increasing Al3+ concentration, the fluorescence band at 610 nm decreased gradually. Monitoring the intrinsic fluorescence variation (I610nm ), as-prepared CDs were developed as an effective platform for fluorescent Al3+ sensing, with a linear range of 0.5-60.0 μM and a detection limit of 3.0 nM. More importantly, R-CDs have been applied successfully to the analysis of Al3+ in actual samples with satisfactory recoveries in the range 97.12-102.05%, which indicated that obtained CDs could be implemented as an effective tool for the identification and detection of Al3+ in actual samples.

Synthesis of intrinsic dual-emission type N,S-doped carbon dots for ratiometric fluorescence detection of Cr (VI) and application in cellular imaging

In this paper, intrinsic dual-emission fluorescent carbon dots (CDs) doped with N and S atoms have been firstly fabricated. The characterization results show that CDs are successfully synthesized with two separate fluorescence emissions at 468 nm and 628 nm, respectively. The strong and selective interaction of Cr (VI) ions with CDs lead to obvious fluorescence decrease of CDs at 468 nm, which is caused by a mixed quenching mechanism. At the same time, the fluorescence at 628 nm increase. Interestingly, the CDs solution show obvious color change under the daylight and UV light, so visualization detection of Cr (VI) can be realized in water samples. Based on the data of the emission intensity ratios of F₄₆₈/F₆₂₈, Cr (VI) can be detected from 3.8 to 38.9 μM combined with the linear correlation coefficient of 0.998, and the lowest detection concentration is 47.2 nM. The platform is satisfactorily applied to the detection of Cr (VI) ions in water samples. In addition, the CDs could be applied as fluorescent probes for cell imaging with dual fluorescent emission.

Novel single excitation dual-emission carbon dots for colorimetric and ratiometric fluorescent dual mode detection of Cu2+ and Al3+ ions

In this study, dual-emission carbon dots (D-CDs) are synthesized via a simple one-step solvothermal treatment of red tea. The obtained D-CDs are characterized by XPS, IR, TEM, XRD, fluorescence and UV-vis spectroscopy techniques. It is found that D-CDs present a strong red fluorescence emission peak at 671 nm and weak blue fluorescence emission peak at 478 nm under the excitation wavelength of 410 nm. The unique dual-emission properties of D-CDs provide great opportunities in ratiometric fluorescence sensing applications. The results show that Cu2+ ions can quench the fluorescence of the red emission band of D-CDs effectively, resulting in the disappearance of red fluorescence ultimately. Upon the addition of Al3+ ions, the fluorescence of blue emission band at 478 nm grows apparently, and the fluorescence color transforms gradually from red to orange, then to yellow-green. Based on these findings, a novel ratiometric fluorescence and colorimetric dual mode nanosensor is developed for simultaneous detection of Cu2+ and Al3+ ions. Regarding Cu2+ ions, the fluorescent detection linear range is 0.1-50 μM with detection limit of 0.1 μM, and the colorimetric detection limit is estimated as 25 μM. With regard to Al3+ ions, the fluorescent detection linear range is 0-20 μM and 25-100 μM with detection limit of 0.5 μM, and the colorimetric detection limit is 20 μM. Furthermore, the fluorescence response mechanisms of Cu2+ and Al3+ ions were discussed detailed. To the best of our current knowledge, this will be the first research work on the simultaneous determination of Cu2+ and Al3+ using D-CDs as fluorescent probes.

Chromium speciation by isophthalic acid-doped polymer dots as sensitive and selective fluorescent probes

Hexavalent chromium is a known carcinogen, among all species of chromium ions, for the respiratory tract in humans. In the present work, a new facile probe is developed for rapid and sensitive determination of Cr(VI) based on utilizing highly fluorescent conjugated poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-co-(1,4-benzo-(2,1',3) thiadiazole)] (PFBT) polymer dots (PDs). The PDs are easily functionalized by doping of isophthalic acid (IPA) into the target PDs during a single step preparation. The prepared PDs with an average diameter of 30 nm illustrated a strong fluorescence with an emission peak centered at 530 nm (photo-excited at 480 nm). The strong fluorescence of PDs is selectively and significantly quench with Cr(VI), while it does not change by Cr(III) ion and, thus, can facilitate a chromium speciation process. The proposed mechanism is an inner filter effect (IFE) mechanism, in which the absorption bands of Cr(IV) overlaps with the emission and excitation bands of the modified PDs. The prepared PDs revealed a good linear relationship from 0.1 to 1000 μmol L^-1 for Cr(VI) with a detection limit of 0.03 μmol L^-1, which further used to track the Cr distribution in water samples. Finally, the IPA-doped PDs with excellent optical properties, biocompatibility, and high quantum yield showed promising potential in tracking Cr species and specifying of different Cr ions inside the human cells, which opening a new door toward getting a better insight into the cell function and metabolism in the presence of heavy metal ions, and especially chromium ions.

Chromium speciation using paper-based analytical devices by direct determination and with electromembrane microextraction

In this study, we developed and compared three different methods for chromium speciation in water samples using microfluidic paper-based analytical devices (μPADs). In all methods, detection was based on the complexation reaction of Cr(VI) with diphenylcarbazide on the μPADs. Cr(III) ions were oxidized to Cr(VI) by Ce(IV) prior to colorimetric detection on the μPADs. In the first method, oxidization of Cr(III) to Cr(VI) in the solution containing both trivalent and hexavalent chromium was performed using a batch procedure to obtain total chromium. A dual electromembrane extraction (DEME) technique for simultaneous preconcentration and extraction of chromium species and a single electromembrane extraction (SEME) for preconcentration and extraction of Cr(VI)/total chromium [quantified as Cr(VI) content after oxidation of Cr(III) ions to Cr(VI)] were used in the second and third methods, respectively. The electromembrane extraction was based on the electrokinetic migration of cationic Cr(III) and anionic Cr(VI) toward the cathode and anode, respectively, into the two different hollow fibres. Octanol-1 and bis(2-ethylhexyl) phosphate (DEHP) in octanol-1 (0.7% v/v) were the most suitable supported liquid membranes for extraction of Cr(VI) and Cr(III), respectively. Among these methods, SEME showed the lowest limits of detection for both analytes. Under optimized conditions, linear calibrations were obtained for Cr(III) from 3 to 30 μg L^-1 and for Cr(VI) from 3 to 70 μg L^-1. The detection limits were 1.0 μg L^-1 and 0.7 μg L^-1 for Cr(III) and Cr(VI), respectively. Our developed method was applied to analyse water samples spiked with different concentrations of Cr(III) and Cr(VI) at the parts-per-billion (ppb) level. The statistical evaluation showed that the proposed method agreed well with the validation method, i.e., inductively coupled plasma atomic emission spectroscopy (ICP-AES).

Luminescent Sol-Gel Glasses from Silicate–Citrate–(Thio)Ureate Precursors

Recent advancements in synthesis and analysis of the composites based on silica and carbon quantum dots have revealed great potential of such systems in bioimaging, sensor, as well as solid-state lighting applications. Most of the synthetic methods for obtaining such materials are still relatively complex and costly. The aim of this work was to study the luminescent properties of silica-based composites prepared by the simple sol-gel method using low-cost silicate–citrate–(thio)ureate precursors. The glassy composites were prepared by acid hydrolysis of ethyl silicate (40%) in aqueous solution of citric acid ureates or thioureates with the citric acid-to-(thio)urea molar ratio of 1:1, 1:1.5 or 1:3. The results of spectrofluorimetric analysis have shown that heat-treated at 270 °C such silica gels upon UV excitation (with an optimum at λexc = 360 nm) emit light in a visible spectrum (400–600 nm). Upon this, photoluminescence efficiency of ureate-derived glasses (quantum yield 70.53% for 1:1.5 sample) appeared to be much higher than that for thioureate-derived glasses (quantum yield 11.25% for 1:3 sample) suggesting that the preparation conditions to obtain the glasses with optimal photoluminescence characteristics are quite different in case of urea and thiourea. Thus, citrate–ureate-derived silica glasses already demonstrate very good potential to be efficient materials for different fluorescence-related applications.