A simple platform for the electro-catalytic detection of the dimetridazole using an electrochemical sensor fabricated by electro-deposition of Ag on carbon graphite: application: orange juice, tomato juice and tap water

The objective of this paper is to evaluate and optimize the experimental parameters of the electro-deposition of silver atom nuclei on a graphite carbon paste to elaborate an electrochemical sensor. The electro-deposition process was performed using the cyclic voltammetry. The electrochemical studies show that the deposited silver micro-particle array offers an excellent electro-catalytic activity towards the NO₂ attractor group of the dimetridazole side chain. SEM morphological analysis of the silver deposits indicates the presence of a large number of Ag micro-particles on the graphite carbon with good nucleation. The size of the Ag micro-particles is of the order of 19,7621 μm and their distribution is normal over the entire range of the pulp. DRX analysis of the deposit also indicates that the microcrystalline structure of the silver microcrystals in the deposit is face-centered cubic. The electrochemical behavior of dimetridazole is totally irreversible, the transfer process is controlled by diffusion phenomena on the surface of the electrode covered by a silver deposit realized μAg@CPE. The analytical performance of the constructed electrode shows a good selectivity. Calibration curves for the detection of dimetridazole have been drawn in the concentration range of 3,5 × 10⁻⁴ mol/L to 10⁻⁶ mol/L using cyclic voltammetry method, with a detection and quantification limits of 6.565 × 10⁻⁷ mol/L and 2.216 × 10⁻⁶ mol/L respectively. The applicability of the constructed electrode has been tested in real samples including orange juice, tomato juice, tap water. The results obtained show a recovery rate above 94%, which is very satisfactory.

Glassy carbon electrode modified with hybrid nanofibers containing carbon nanotubes trapped in chitosan for the voltammetric sensing of nicotine at biological pH

In this paper, nicotine (NIC) was detected by cyclic voltammetry (CV) using a modified glassy carbon (GC) electrode. To do this, the surface of the GC electrode was modified by hybrid nanofiber obtained from the electrospinning method. Hybrid nanofibers were produced through the dispersion of carboxylated multi-walled carbon nanotube (MWCNT-COOH) as an inorganic component in the chitosan (CS) polymer matrix as an organic component. The nanofibers showed unique morphology and high surface area value. With the increase of functionalized carbon nanotube content in the nanofibers, the mean pore diameter and average nanofiber diameter increased. The electrochemical properties of nanofibers towards the sensing of NIC were investigated by the CV method. NIC was irreversibly reduced with the use of a CS/MWCNT-COOH electrode, a controlled process with two protons and two electrons. An oxidation signal at lower potential with higher current was obtained for NIC with the use of a polymer-modified electrode compared to a GC electrode. This was as a result of the electrocatalytic effect of the hybrid nanofibers due to the ability of carbon nanotubes to increase the rate of electron transfer. Under optimum conditions, the oxidation of NIC occurred at 0.82 eV with a pH of 7.4. The linear calibration curve was in the concentration range of 0.1-100 μM NIC (R ² = 0.9987) with a detection limit of 30 nM. For 100 parallel 10 μM NIC diagnoses for five replicates, 97.2% with a standard deviation of 4.08 maintained their stability over the first cycle. This indicates that the CS/MWCNT-COOH electrode has excellent reproducibility and stability.

Facile caffeine electrochemical detection via electrodeposited Ag nanoparticles with modifier polymers on carbon paste sensor at aqueous and micellar media

The analysis and detection of caffeine (Caf) is very useful due to its widespread usage in several daily consumed beverages, food products, and pharmacological preparations with various physiological effects. The preparation of a newly electrodeposited Ag nanoparticles – cellulose acetate phthalate (CAP) – chitosan (Chit) modified carbon paste (ACCMCP) sensor for sensitive determination of Caf in 0.01 mol L−1 H3PO4 solution (pH 1.0–5.0) both in aqueous and micellar media (0.5 mmol L−1 SDS) was achieved. The interaction of Caf was monitored using electrochemical techniques such as cyclic voltammetry, differential pulse voltammetry, electrochemical impedance spectroscopy, and chronoamperometry, and surface characterization was carried out using X-ray diffraction, scanning electron microscope, and energy dispersive X-ray techniques. The linear detection range of Caf was between 4 and 500 μmol L−1 (r2 = 0.955) and the limit of detection obtained from the calibration plot was 0.252 μmol L−1. The sensor was applicable for detecting Caf in numerous real samples with recoveries from 98.03% to 101.60% without interference of any accompanying species, which ensures high method selectivity.

Electrochemical sensing of nicotine using CuWO4 decorated reduced graphene oxide immobilized glassy carbon electrode

A novel and selective electrochemical sensing of nicotine is studied using copper tungstate decorated reduced graphene oxide nanocomposite (CuWO₄/rGO) nafion (Nf) immobilized GC electrode (GCE). The CuWO₄/rGO nanocomposite is synthesized using sonication method and characterized by HR-TEM (High resolution transmission electron microscopy), SEM (Scanning electron microscopy), FT-IR (Fourier transform infrared spectroscopy), SAED (Selected area of electron diffraction pattern), XRD (X-ray diffraction), Raman spectroscopy, Thermo gravimetric analysis (TGA) and EDX (Energy dispersive X-ray diffraction) techniques. The CuWO₄/rGO/Nf immobilized GCE shows better electrocatalytic response for the detection of nicotine as compared to bare GCE. A better selectivity and sensitivity is achieved using CuWO₄/rGO/Nf immobilized GCE to detect 0.1 µM nicotine in the presence of 100-fold excess concentrations of different interferents. The present CuWO₄/rGO/Nf immobilized GCE electrochemical sensor exhibits an ample range of sensing from 0.1 µM to 0.9 µM and the low detection limit is found to be 0.035 µM (S/N = 3). Comparable results are achieved for the determination of nicotine in various real samples such as cigarettes (Gold flake and Wills) and urine samples with improved recoveries.