Electrochemistry as a Powerful Tool for Investigations of Antineoplastic Agents: A Comprehensive Review

Cancer is most frequently treated with antineoplastic agents (ANAs) that are hazardous to patients undergoing chemotherapy and the healthcare workers who handle ANAs in the course of their duties. All aspects related to hazardous oncological drugs illustrate that the monitoring of ANAs is essential to minimize the risks associated with these drugs. Among all analytical techniques used to test ANAs, electrochemistry holds an important position. This review, for the first time, comprehensively describes the progress done in electrochemistry of ANAs by means of a variety of bare or modified (bio)sensors over the last four decades (in the period of 1982-2021). Attention is paid not only to the development of electrochemical sensing protocols of ANAs in various biological, environmental, and pharmaceutical matrices but also to achievements of electrochemical techniques in the examination of the interactions of ANAs with deoxyribonucleic acid (DNA), carcinogenic cells, biomimetic membranes, peptides, and enzymes. Other aspects, including the enantiopurity studies, differentiation between single-stranded and double-stranded DNA without using any label or tag, studies on ANAs degradation, and their pharmacokinetics, by means of electrochemical techniques are also commented. Finally, concluding remarks that underline the existence of a significant niche for the basic electrochemical research that should be filled in the future are presented.

The development of electrochemical DNA biosensor based on poly-l-methionine and bimetallic AuPt nanoparticles coating: Picomolar detection of Imatinib and Erlotinib

We report on the preparation of a new and simple electrochemical DNA biosensor based on DNA/AuPt/p-L-Met coating on a screen-printed carbon electrode (SPE) and its use in the determination of the cancer therapy agents, Imatinib (IMA) and Erlotinib (ERL). Poly-l-methionine (p-L-Met), gold, and platinum nanoparticles (AuPt) were successfully coated by one-step electrodeposition onto the SPE from a solution containing L-Met, HAuCl_4, and H₂PtCl₆. The immobilization of DNA was achieved by drop-casting on the surface of the modified electrode. Cyclic Voltammetry (CV), Electrochemical Impedance Spectroscopy (EIS), Field-Emission Scanning Electron Microscopy (FE-SEM), Energy-Dispersive X-ray Spectroscopy (EDX), and Atomic Force Microscopy (AFM) were used to investigate the morphology, the structure, and the electrochemical performance of the sensor. Experimental factors influencing the coating and DNA immobilization processes were optimized. The peak currents originating from guanine (G) and adenine (A) oxidation of ds-DNA were used as signals to quantify IMA and ERL in the concentration range 2.33-80 nM and 0.032-1.0 nM with the LODs of 0.18 nM and 0.009 nM, respectively. The biosensor developed was suitable for determining IMA and ERL in human serum and pharmaceutical samples.

Electrochemical Behavior and Square-Wave Stripping Voltammetric Determination of Roflumilast in Pharmaceutical Dosage Forms

BACKGROUND

Bronchial asthma and chronic obstructive pulmonary disease (COPD) are among the most common chronic diseases. Roflumilast is a novel, potent, selective, and long-acting phosphodiesterase 4 (PDE-4) inhibitor for the treatment of bronchial asthma and COPD. It has anti-inflammatory effects, and it has been shown to reduce exacerbations and improve pulmonary function in patients with COPD. Although there have been some other analytical methodologies reported for the determination of roflumilast in pharmaceutical dosage forms, there has not yet been any electrochemical methodology proposed for determination of this unique active pharmaceutical ingredient in its dosage forms.

OBJECTIVE

The aim of this study was to develop an easily applied, selective, sensitive, accurate, and precise square-wave stripping voltammetric (SWSV) method for the determination of roflumilast in its pharmaceutical dosage forms. In addition, the electrochemical behavior of roflumilast was investigated.

METHODS

The proposed method was based on electrochemical reduction of roflumilast at a hanging mercury drop electrode (HMDE) in 0.1 M K2HPO4 and 0.1 M Na2B4O7 (1:1, v/v) buffer at pH 5.0. Two reduction peaks were observed at -1150 mV and -1260 mV with 30 s of accumulation time and -850 mV of accumulation potential time versus Ag/AgCl reference electrode.

RESULTS

The highest peak current values with the best peak definition were observed at a frequency of 50 Hz, scan increment of 5 mV, and pulse amplitude 25 mV. The proposed method was validated by evaluating validation parameters such as linearity, sensitivity, repeatability, accuracy, precision, selectivity, recovery, robustness, and ruggedness. A good linear correlation (r=0.9948) was obtained between the electrochemical response of roflumilast and its concentration in the range of 0.74-3.05 μg mL-1 under the optimum conditions. The obtained accuracy results were between 2.04% and -2.04% while the relative standard deviation of the results was at least 2.78% for intraday and inter-day studies. The mean recovery for the real applications was 100.63% ± 0.52. The electrochemical behavior of roflumilast was investigated by cyclic voltammetry. The cyclic voltammogram of roflumilast exhibited two peaks and the reduction reaction was reversible.

CONCLUSION

This developed and validated SWSV method was applied successfully for the determination of roflumilast in tablet dosage form (Daxas®) to assess active roflumilast content. Since high- -performance liquid chromatography is a dominant technique in industry for quality control of active pharmaceutical ingredients, the finding in the present study demonstrated that square-wave stripping voltammetry could be easily utilized in routine applications to determine roflumilast content in its dosage forms.

Heterostructured bismuth oxide/hexagonal-boron nitride nanocomposite: A disposable electrochemical sensor for detection of flutamide

Aquatic contamination from the accumulation of pharmaceuticals has induced severe toxicological impact to the ecological environment, especially from non-steroidal anti-inflammatory drugs (NSAIDs). Real-time monitoring of flutamide, which is a class of NSAIDs, is very significant in environmental protection. In this work, we have synthesized the hexagonal-h boron nitride decorated on bismuth oxide (Bi₂O₃/h-BN) based nanocomposite for the effective electrochemical detection of flutamide (FTM). The structural and morphological information of the heterostructured Bi₂O₃/h-BN nanocomposite was analyzed by using a sequence of characterization methods. Voltammetric techniques were used to evaluate the analytical performance of the Bi₂O₃/h-BN modified screen-printed carbon electrode (SPCE) for the FTM detection. The Bi₂O₃/h-BN modified SPCE displays a synergetic catalytic effect for the reduction of FTM due to large surface area, numerous active sites, fast charge transfer and abundant defects. The proposed electrochemical sensing platform demonstrates high selectivity, low detection limit (9.0 nM), good linear ranges (0.04-87 μM) and short response time for the detection of FTM. The feasibility of the electrochemical sensor has been proved by the successful application to determine FTM in environmental samples.

In Situ Growth of Metal-Organic Framework HKUST-1 on Graphene Oxide Nanoribbons with High Electrochemical Sensing Performance in Imatinib Determination

Metal-organic frameworks (MOFs) have been previously investigated as electrode materials for developing electrochemical sensors. They have usually been reported to suffer from poor conductivity and improvement in the conductivity of MOFs is still a great challenge. Here, we reported the fabrication of an electrochemical sensor based on the in situ growth of framework HKUST-1 on conductive graphene oxide nanoribbons (GONRs)-modified glassy carbon electrode (GCE) (HKUST-1/GONRs/GCE). The as-fabricated modified electrode was characterized using field emission scanning electron microscopy, transmission electron microscopy (TEM), high-resolution TEM, Fourier transform infrared, X-ray diffraction, electrochemical impedance spectroscopy, cyclic voltammetry, and Raman spectroscopy. The voltammetric response of HKUST-1/GONRs/GCE toward Imatinib (IMA), as an anticancer drug, is dramatically higher than HKUST-1/GCE because of the synergic effect of the GONRs and HKUST-1 framework. The calibration curve at the HKUST-1/GONRs/GCE for IMA covered two linear dynamic ranges, 0.04-1.0 and 1.0-80 μmol L^-1, with a detection limit of 0.006 μmol L^-1 (6 nmol L^-1). Taking advantage of the conductivity of GONRs and large surface area of HKUST-1, a sensitive modified electrode was developed for the electrochemical determination of IMA. The present method provides an effective strategy to solve the poor conductivity of the MOFs. Finally, the obtained electrochemical performance made this modified electrode promising in the determination of IMA in urine and serum samples.

Imatinib mesylate

Imatinib (INN), marketed by Novartis as Gleevec (United States) or Glivec (Europe/Australia/Latin America), received Food & Drug Administration (FDA) approval in May 2001 and is a tyrosine kinase inhibitor used in the treatment of multiple cancers, most notably Philadelphia chromosome-positive (Ph+) chronic myelogenous leukemia. Like all tyrosine kinase inhibitors, imatinib works by preventing a tyrosine kinase enzyme. Because the BCR-Abl tyrosine kinase enzyme exists only in cancer cells and not in healthy cells, imatinib works as a form of targeted therapy-only cancer cells are killed through the drug's action. In this regard, imatinib was one of the first cancer therapies to show the potential for such targeted action and is often cited as a paradigm for research in cancer therapeutics. This study presents a comprehensive profile of imatinib, including detailed nomenclature, formulae, physico-chemical properties, methods of preparation, and methods of analysis (including compendial, electrochemical, spectroscopic, and chromatographic methods of analysis). Spectroscopic and spectrometric analyses include UV/vis spectroscopy, vibrational spectroscopy, nuclear magnetic resonance spectrometry ((1)H and (13)C NMR), and mass spectrometry. Chromatographic methods of analyses include electrophoresis, thin layer chromatography, and high-performance liquid chromatography. Preliminary stability investigations for imatinib have established the main degradation pathways, for example, oxidation to N-oxide under oxidative stress conditions. Stability was also carried out for the formulation by exposing to different temperatures 0°C, ambient temperature, and 40°C. No remarkable change was found in the drug content of formulation. This indicates that the drug was stable at the above optimized formulation. Stability studies under acidic and alkaline conditions have established the following main degradation products: α-(4-Methyl-1-piperazinyl)-3'-{[4-(3-pyridyl)-2-pyrimidinyl] amino}-p-tolu-p-toluid-ide methanesulfonate and 4-(4-methylpiperazin-1-ylmethyl)-benzoic acid. The main degradation products under oxidation conditions, that is, 4-[(4-methyl-4-oxido-piperazin-1-yl)-methyl]-N-[4-methyl-3-(4-pyridin-3-yl-pyrimidin-2-ylamino)-phenyl]-enzamide, 4-[(4-methyl-1-oxido-piperazin-1-yl)-methyl]-N-[4-methyl-3-(4-pyridin-3-yl-pyrimidin-2-ylamino)-phenyl]-benzamide, and 4-[(4-methyl-1,4-dioxido-piperazin-1-yl)-methyl]-N-[4-methyl-3-(4-pyridin-3-yl-pyrimidin-2-ylamino)-phenyl]-enzamide. Clinical application studies for pharmacodynamics, pharmacokinetics, mechanism of action, and clinical uses of the drug were also presented. Each of the above stages includes appropriate figures and tables. More than 50 references were given as proof of the above-mentioned studies.