Influence of grafting on the glass transition temperature of PS thin films

Ultrafast photophysics of an orange-red thermally activated delayed fluorescence emitter: the role of external structural restraint

The application of thermally activated delay fluorescence (TADF) emitters in the orange-red regime usually suffers from the fast non-radiative decay of emissive singlet states (kSNR), leading to low emitting efficiency in corresponding organic light-emitting diode (OLED) devices. Although kSNR has been quantitatively described by energy gap law, how ultrafast molecular motions are associated with the kSNR of TADF emitters remains largely unknown, which limits the development of new strategies for improving the emitting efficiency of corresponding OLED devices. In this work, we employed two commercial TADF emitters (TDBA-Ac and PzTDBA) as a model system and attempted to clarify the relationship between ultrafast excited-state structural relaxation (ES-SR) and kSNR. Spectroscopic and theoretical investigations indicated that S1/S0 ES-SR is directly associated with promoting vibrational modes, which are considerably involved in electronic-vibrational coupling through the Huang-Rhys factor, while kSNR is largely affected by the reorganization energy of the promoting modes. By restraining S1/S0 ES-SR in doping films, the kSNR of TADF emitters can be greatly reduced, resulting in high emitting efficiency. Therefore, by establishing the connection among S1/S0 ES-SR, promoting modes and kSNR of TADF emitters, our work clarified the key role of external structural restraint for achieving high emitting efficiency in TADF-based OLED devices.

End-Tethered Chains Increase the Local Glass Transition Temperature of Matrix Chains by 45 K Next to Solid Substrates Independent of Chain Length

The local glass transition temperature T_g of pyrene-labeled polystyrene (PS) chains intermixed with end-tethered PS chains grafted to a neutral silica substrate was measured by fluorescence spectroscopy. To isolate the impact of the grafted chains, the films were capped with bulk neat PS layers eliminating competing effects of the free surface. Results demonstrate that end-grafted chains strongly increase the local T_g of matrix chains by ≈45 K relative to bulk T_g, independent of grafted chain molecular weight from M_n = 8.6 to 212 kg/mol and chemical end-group, over a wide range of grafting densities σ = 0.003 to 0.33 chains/nm² spanning the mushroom-to-brush transition regime. The tens-of-degree increase in local T_g resulting from immobilization of the chain ends by covalent bonding in this athermal system suggests a mechanism that substantially increases the local activation energy required for cooperative rearrangements.

Review and reproducibility of forming adsorbed layers from solvent washing of melt annealed films

Recent studies suggest chain adsorption in the melt may be responsible for a number of property changes in thin films by making correlations between the residual adsorbed layer thickness h_ads(t) measured after a given solvent washing procedure as a function of annealing time t of the film at an elevated temperature prior to this solvent rinse. This procedure, frequently called "Guiselin's experiment", refers to the thought experiment proposed in a 1992 theoretical treatment by Guiselin that assumed chain segments in contact with the surface are irreversibly adsorbed whereby unadsorbed chains could be washed away by solvent without disturbing the adsorbed substrate contact points in the melt. In the present work, we review this recent literature, identifying and experimentally testing a common protocol for forming adsorbed layers h_ads(t) from solvent washing melt films. We find h_ads(t) curves to be far less reproducible and reliable than implied in the literature, strongly dependent on solvent washing and substrate cleaning conditions, and annealing at elevated temperatures is unnecessary as densification of films sitting at room temperature makes the glassy film harder to wash off, leaving behind h_ads of comparable thickness. This review also summarizes literature understanding developed over several decades of study on polymer adsorption in solution, which experimentally demonstrated that polymer chains in solution are highly mobile, diffusing and exchanging on the surface even in the limit of strong adsorption, contradicting Guiselin's assumption. Preformed adsorbed layers of different thicknesses h_ads are shown to not affect the average glass transition temperature or physical aging of 30 nm thick films. In summary, a number of open questions and implications are discussed related to thin films and polymer nanocomposites.

Temperature-Dependent Spectroscopic Ellipsometry of Thin Polymer Films

Thin polymer films have found many important applications in organic electronics, such as active layers, protective layers, or antistatic layers. Among the various experimental methods suitable for studying the thermo-optical properties of thin polymer films, temperature-dependent spectroscopic ellipsometry plays a special role as a nondestructive and very sensitive optical technique. In this Review Article, issues related to the physical origin of the dependence of ellipsometric angles on temperature are surveyed. In addition, the Review Article discusses the use of temperature-dependent spectroscopic ellipsometry for studying phase transitions in thin polymer films. The benefits of studying thermal transitions using different cooling/heating speeds are also discussed. Furthermore, it is shown how the analysis and modeling of raw ellipsometric data can be used to determine the thermal properties of thin polymer films.

Optimizing the Grafting Density of Tethered Chains to Alter the Local Glass Transition Temperature of Polystyrene near Silica Substrates: The Advantage of Mushrooms over Brushes

We measured the local glass transition temperature T_g(z) of polystyrene (PS) as a function of distance z from a silica substrate with end-grafted chains using fluorescence, where competing effects from the free surface have been avoided to focus only on the influence of the tethered interface. The local T_g(z) increase next to the chain-grafted substrate is found to exhibit a maximum increase of 49 ± 2 K relative to bulk at an optimum grafting density that corresponds to the mushroom-to-brush transition regime. This perturbation to the local T_g(z) dynamics of the matrix is observed to persist out to a distance z ≈ 100-125 nm for this optimum grafting density before bulk T_g is recovered, a distance comparable to that previously observed by Baglay and Roth [J. Chem. Phys. 2017, 146, 203307] for PS next to the higher-T_g polymer polysulfone.