Controlling breath figure patterns on PDMS by concentration variation of ethanol-methanol binary vapors

Investigation of Orderliness of Breath Figures on Polydimethylsiloxane

Breath figures, the self-assembled water droplet patterns formed on cold surfaces, are ideally hexagonal. A deviation from the ideal honeycomb pattern can occur due to variation of roughness of the substrate, change in vapor from water to other liquids, etc. The thermodynamics of breath figure formation is complex, and any deviation from ideality is even more difficult to understand. In the absence of a unified theory to understand such patterns and experimental difficulties in monitoring all aspects of formation of breath figures, the patterns formed are studied in terms of their orderliness by determining their Voronoi entropy. We report here the Voronoi entropy calculations of the breath figure fabricated over the smooth and constrained surfaces using polydimethylsiloxane (PDMS) of molecular weight 235 g/mol in two different environments: (a) water and (b) binary mixture of ethanol-propanol over the entire concentration range. Ordered honeycomb patterns are seen on the smooth surfaces, and disordered patterns are seen on constrained surfaces when imaged using confocal microscopy. The latter is attributed to the depinning of the triple-phase contact line, implying that the underlying constraints influence the pore morphology. Contact angle studies of water over the breath figure patterned surfaces indicate the hydrophobic nature of the patterned surfaces.

Porous polymer film formation by water droplet templating using polystyrene

Studies show that the formation of breath figures over polystyrene is not clearly understood-sometimes the patterns are regular and sometimes they are barely formed. In an attempt to understand this process a little more, breath figures over polystyrene of three molecular weights and on the smooth and grooved DVD surfaces are prepared and studied. The microporous films are prepared by the evaporation of the chloroform solution of the polymers in a humid environment. The thus formed breath figure patterns are studied under a confocal laser scanning microscope and the images are analyzed. Breath figures were formed for (a) three molecular weights of the polymer (b) two casting techniques, and (c) on smooth and grooved surfaces (of a commercial DVD). The wetting of the breath figures formed by water is also reported here. The pore diameters were found to increase with increase in molecular weight and also with concentration of the polymer used. Only drop-casting method yield breath figures. Voronoi entropy, calculated from the images, indicates ordered pores on the grooved surface compared to smooth surfaces. Contact angle studies indicate a hydrophobic nature of the polymer, with the hydrophobicity increasing by the patterning.

1D Roughness Driven Depinning of Self-Assembly of Liquid Droplets

The conventional hexagonal, uniform breath figure pattern formed over smooth substrates and substrates with constraints of the order of 50 μm is distorted when the underlying constraints are down to 1 μm. This paper explores this phenomenon further and concludes that, in addition to topology-based arguments presented by other authors previously, it is necessary to invoke the depinning effects of the three-phase contact line in order to explain the same. The influence of surface constraints on the self-assembly of liquid droplets is investigated. A semiquantitative explanation for large-scale pattern formation consisting of small-scale closely arranged droplets inside the large-scale distorted ring of droplets is presented in this paper. The scale at which the influence of constraints becomes dominant is also determined in this study. It is seen that the underlying roughness has a larger impact than the nature of polymer on pore size. Comparative studies of pore patterns formed on smooth and constrained substrates are reported. The simulated energy-minimized shapes of the droplets on smooth and constrained substrates are obtained using Surface Evolver.

Formation of Hierarchical Porous Films with Breath-Figures Self-Assembly Performed on Oil-Lubricated Substrates

Hierarchical honeycomb patterns were manufactured with breath-figures self-assembly by drop-casting on the silicone oil-lubricated glass substrates. Silicone oil promoted spreading of the polymer solution. The process was carried out with industrial grade polystyrene and polystyrene with molecular mass M w = 35 , 000 g m o l . Both polymers gave rise to patterns, built of micro and nano-scaled pores. The typical diameter of the nanopores was established as 125 nm. The mechanism of the formation of hierarchical patterns was suggested. Ordering of the pores was quantified with the Voronoi tessellations and calculation of the Voronoi entropy. The Voronoi entropy for the large scale pattern was S v o r = 0.6 - 0.9 , evidencing the ordering of pores. Measurement of the apparent contact angles evidenced the Cassie-Baxter wetting regime of the porous films.

Droplet clusters: nature-inspired biological reactors and aerosols

Condensed microdroplets play a prominent role in living nature, participating in various phenomena, from water harvesting by plants and insects to microorganism migration in bioaerosols. Microdroplets may also form regular self-organized patterns, such as the hexagonally ordered breath figures on a solid surface or levitating monolayer droplet clusters over a locally heated water layer. While the breath figures have been studied since the nineteenth century, they have found a recent application in polymer surface micropatterning (e.g. for superhydrophobicity). Droplet clusters were discovered in 2004, and they are the subject of active research. Methods to control and stabilize droplet clusters make them suitable for the in situ analysis of bioaerosols. Studying life in bioaerosols is important for understanding microorganism origins and migration; however, direct observation with traditional methods has not been possible. We report preliminary results on direct in situ observation of microorganisms in droplet clusters. We also present a newly observed transition between the hexagonally ordered and chain-like states of a droplet cluster. This article is part of the theme issue 'Bioinspired materials and surfaces for green science and technology (part 2)'.