How stiff is skin?

The measurement of the mechanical properties of skin (such as stiffness, extensibility and strength) is a key step in characterisation of both dermal ageing and disease mechanisms and in the assessment of tissue-engineered skin replacements. However, the biomechanical terminology and plethora of mathematical analysis approaches can be daunting to those outside the field. As a consequence, mechanical studies are often inaccessible to a significant proportion of the intended audience. Furthermore, devices for the measurement of skin function in vivo generate relative values rather than formal mechanical measures, therefore limiting the ability to compare studies. In this viewpoint essay, we discuss key biomechanical concepts and the influence of technical and biological factors (including the nature of the testing apparatus, length scale, donor age and anatomical site) on measured mechanical properties such as stiffness. Having discussed the current state-of-the-art in macro-mechanical and micromechanical measuring techniques and in mathematical and computational modelling methods, we then make suggestions as to how these approaches, in combination with 3D X-ray imaging and mechanics methods, may be adopted into a single strategy to characterise the mechanical behaviour of skin.

Effects of red ginseng on the elastic properties of human skin

Background

Red ginseng contains components, including microelements, vitamins, essential oils, and fatty acids, that can be used in skincare to delay the aging process. We investigated the effects of red ginseng treatment on skin elasticity by assessing cellular stiffness and measuring collagen protein synthesis.

Methods

Human dermal fibroblasts were treated with red ginseng, and the resulting changes in stiffness were investigated using atomic force microscopy. Cytoskeletal changes and mRNA expression of biomarkers of aging, including that of procollagens I and VII, elastin, and fibrillin-1, were investigated. Collagen in a human skin equivalent treated with red ginseng was visualized via hematoxylin and eosin staining, scanning electron microscopy, and atomic force microscopy.

Results and conclusion

The stiffness of fibroblasts was significantly reduced by treatment with red ginseng concentrations of ≥ 0.8 mg/mL. The ratio of F-actin to G-actin decreased after treatment, which corresponded to a change in fibroblast stiffness. The storage modulus (G′) and loss modulus (G″) of the skin equivalent were both lowered by red ginseng treatment. This result indicates that the viscoelasticity of the skin equivalent can be restored by red ginseng treatment.

Wearable Sweat Rate Sensors for Human Thermal Comfort Monitoring

We propose watch-type sweat rate sensors capable of automatic natural ventilation by integrating miniaturized thermo-pneumatic actuators, and experimentally verify their performances and applicability. Previous sensors using natural ventilation require manual ventilation process or high-power bulky thermo-pneumatic actuators to lift sweat rate detection chambers above skin for continuous measurement. The proposed watch-type sweat rate sensors reduce operation power by minimizing expansion fluid volume to 0.4 ml through heat circuit modeling. The proposed sensors reduce operation power to 12.8% and weight to 47.6% compared to previous portable sensors, operating for 4 hours at 6 V batteries. Human experiment for thermal comfort monitoring is performed by using the proposed sensors having sensitivity of 0.039 (pF/s)/(g/m²h) and linearity of 97.9% in human sweat rate range. Average sweat rate difference for each thermal status measured in three subjects shows (32.06 ± 27.19) g/m²h in thermal statuses including ‘comfortable’, ‘slightly warm’, ‘warm’, and ‘hot’. The proposed sensors thereby can discriminate and compare four stages of thermal status. Sweat rate measurement error of the proposed sensors is less than 10% under air velocity of 1.5 m/s corresponding to human walking speed. The proposed sensors are applicable for wearable and portable use, having potentials for daily thermal comfort monitoring applications.

Optical tracking of local surface wave for skin viscoelasticity

Rapid and effective determination of biomechanical properties is important in examining and diagnosing skin thermal injury. Among the methods used, viscoelasticity quantification is one of the most effective methods in determining such properties. This study aims to rapidly determine skin viscoelasticity by optically tracking the local surface wave. New elastic and viscous coefficients were proposed to indicate skin viscoelasticity based on a single impulse response of the skin. Experiments were performed using fresh porcine skin samples. Surface wave was generated in a single impulse using a vibrator with a ball-tipped device and was detected using a laser Doppler vibrometer. The motions along the depth direction were monitored using an ultrasound system. The ultrasound monitoring results indicated the multi-layered viscoelasticity of the epidermis and dermis. The viscoelastic coefficients from four healthy samples show a potential viscoelasticity variation of porcine skin. In one sample, the two coefficients were evidently higher than those in a healthy area if the skin was slightly burned. These results indicate that the proposed method is sensitive, effective, and quick in determining skin viscoelasticity.

A NEW CUSTOM-CONTOURED CUSHION SYSTEM BASED ON FINITE ELEMENT MODELING PREDICTION

High internal stress in the deep tissues adjacent to bony prominences can cause deep tissue injuries. Therefore, internal stress in the soft tissue should be considered when the performance of anti-decubitus cushions is evaluated during cushion design. This paper reports on a custom-contoured cushion (CCC) system incorporated with a three-dimensional (3D) slice subject-specific finite element (FE) model to investigate the internal stress distribution in the soft tissues. This stress distribution was used to transform the interface pressure into the carving depth of the fabricated cushions based on the biomechanical characteristics of the cushion materials. The internal stress in the soft tissues was investigated using an FE model of buttocks and cushion made from three cushion materials. The cushion design was optimized according to the properties of the material. The simulated interface stress between the buttocks and the cushion (18 kPa) was consistent with the measured interface pressure of the CCC (17.1 kPa). The 3D FE model predicted the internal stress and displacement of the soft tissues and cushion. Additionally, it efficiently optimized the selection of cushion material. Fifty subjects (25 subjects with spinal cord injuries (SCI) and 25 healthy subjects) were recruited to investigate the interface pressure and perform subjective comfort evaluation. The CCC decreased the interface pressure under the buttocks and simultaneously increased the subjective comfort and stability. The effectiveness of the cushion materials was predicted by the CCC system, which also validated the clinical performance of decreasing interface pressure.