Transition metal oxide clusters: advanced electrocatalysts for a sustainable energy future

The comprehensive utilization of sustainable green energy is essential to face the global energy and environmental crisis. The oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and electrocatalytic urea synthesis (EUS) are the pivotal electrocatalytic processes, necessitating the development of low-cost electrocatalysts with high efficiency. Small-sized transition metal oxide (TMO) clusters have attracted a lot of attention because of their exceptional qualities, such as exhibiting a dense array of low-coordinated metal active sites (e.g. abundant metal cation defects and oxygen vacancy), amorphous structures with high surface energy, high atom utilization efficiency, and cost-effectiveness. Furthermore, the synergistic actions between metal clusters and TM-Nx single atom active sites remarkably boost up the electrocatalytic performances, corroborated by density functional theory (DFT). More efforts in this comprehensive feature article are expected to achieve insights into the fundamental understanding of electrocatalytic reaction mechanisms in our lab and serve as a guide for creating cutting-edge electrocatalysts of transition metal oxide clusters.

Fe2O3 Embedded in N-Doped Porous Carbon Derived from Hemin Loaded on Active Carbon for Supercapacitors

The high power density and long cyclic stability of N-doped carbon make it an attractive material for supercapacitor electrodes. Nevertheless, its low energy density limits its practical application. To solve the above issues, Fe2O3 embedded in N-doped porous carbon (Fe2O3/N-PC) was designed by pyrolyzing Hemin/activated carbon (Hemin/AC) composites. A porous structure allows rapid diffusion of electrons and ions during charge-discharge due to its large surface area and conductive channels. The redox reactions of Fe2O3 particles and N heteroatoms contribute to pseudocapacitance, which greatly enhances the supercapacitive performance. Fe2O3/N-PC showed a superior capacitance of 290.3 F g-1 at 1 A g-1 with 93.1% capacity retention after 10,000 charge-discharge cycles. Eventually, a high energy density of 37.6 Wh kg-1 at a power density of 1.6 kW kg-1 could be delivered with a solid symmetric device.

Zn-Induced Synthesis of Porous Fe-N,S-C Electrocatalyst with Iron-Based Active Sites Containing Sulfides, Oxides and Nitrides for Efficient Oxygen Reduction and Zinc-Air Batteries

There is an urgent need to design and synthesize non-noble metal electrocatalysts (NNMEs) for the replacement of platinum-based electrocatalysts to enhance the sluggish oxygen reduction reaction (ORR) for Zn-air batteries and fuel cells. Herein, Fe-N,S-C materials were fabricated through two steps: first, reprecipitating hemin by adjusting the pH and, then, decorating it with melamine and cysteine in the presence of Zn2+. The resulting Fe-N,S-C-950 (Zn) was prepared after pyrolysis at 950 °C. Using this method, abundant iron-based active species with good dispersion were obtained. The fabrication of more micropores in Fe-N,S-C-950 (Zn) plays a positive role in the improvement of ORR activity. On comparison, Fe-N,S-C-950 (Zn) outperforms Fe-N,S-C-950 and Fe-N-C-950 (Zn) with respect to the ORR due to its larger specific surface area, porous structure, multiple iron-based active sites and N- and S-doped C. Fe-N,S-C-950 (Zn) achieves outstanding ORR performances, including a half-wave potential (E1/2) of 0.844 V and 0.715 V versus a reversible hydrogen electrode (RHE) in 0.1 M KOH and 0.1 M HClO4 solution, respectively. In addition, Fe-N,S-C-950 (Zn) shows an outstanding Zn-air battery performance with an open-circuit voltage (OCV) of 1.450 V and a peak power density of 121.9 mW cm-2, which is higher than that of 20 wt% Pt/C. As a result, the as-prepared electrocatalyst in this work shows the development of the Zn-assisted strategy combined with the assembly of porphyrins as NNMEs for the enhancement of the ORR in both alkaline and acidic solutions.

In Vitro Degradation and Photoactivated Antibacterial Activity of a Hemin-CaP Microsphere-Loaded Coating on Pure Magnesium

Photoactivated sterilization has received more attention in dealing with implant-associated infections due to its advantages of rapid and effective bacteriostasis and broad-spectrum antibacterial activity. Herein, a micro-arc oxidation (MAO)/polymethyltrimethoxysilane (PMTMS)@hemin-induced calcium-bearing phosphate microsphere (Hemin-CaP) coating was prepared on pure magnesium (Mg) via MAO processing and dipping treatments. The morphology and composition of the coating were characterized via scanning electron microscopy, Fourier transform infrared spectrometer, X-ray diffractometer and X-ray photoelectron spectrometer. Corrosion behavior was evaluated through electrochemical and hydrogen evolution tests. The release of Fe³⁺ ions at different immersion times was measured with an atomic absorption spectrophotometer. Antibacterial performance and cytotoxicity were assessed using the spread plate method, MTT assay and live/dead staining experiment. The results showed that the corrosion current density of the MAO/PMTMS@(Hemin-CaP) coating (4.41 × 10^-8 A·cm^-2) was decreased by two orders of magnitude compared to that of pure Mg (3.12 × 10^-6 A·cm^-2). Photoactivated antibacterial efficiencies of the Hemin-CaP microspheres and MAO/PMTMS@(Hemin-CaP) coating reached about 99% and 92%, respectively, which we attributed to the photothermal and photodynamic properties of hemin with a porphyrin ring. Moreover, based on the release of Fe³⁺ ions, the MC3T3-E1 pre-osteoblasts' viability reached up to 125% after a 72 h culture, indicating a positive effect of the coating in promoting cell growth. Thus, this novel composite coating holds a promising application as bone implants.

Controlled synthesis of metal-organic frameworks with skeletal and pore-filling iron(III) porphyrins for electrochemical oxygen reduction

Electrocatalysts derived from porphyrinic metal-organic frameworks (MOFs) have exhibited very promising electrochemical performances toward oxygen reduction reaction (ORR). Nevertheless, porphyrinic MOFs have been limited to skeleton- or the pore-modified ones mostly by Fe porphyrin (FeP), which only provide insufficient ORR active sites. Herein, we report controlled synthesis of PCN-222 decorated by both pore-filling Hemin and skeletal iron(III) meso-tetra(4-carboxyphenyl) porphyrin (Fe[Formula: see text]TCPP) that partially substitutes original backbone TCPP. Subsequent pyrolysis of the composite PCN-222 led to the synthesis of nanorod electrocatalysts with atomically dispersed Fe-N-C sites, which exhibit efficient activity and durability toward ORR in both alkaline and acidic media. Moreover, it appears that the atomically dispersed Fe-N-C sites might possess a distorted octahedral configuration of (O/N)2-Fe[Formula: see text]-N4 as evidenced by extended X-ray absorption fine structure spectra (EXAFS), aberration-corrected high-angle annular dark-field scanning transmission electron microscope (HAADF-STEM), and X-ray photoelectron spectroscopy (XPS). To the best of our knowledge, controlled modification to both the skeleton and the pore of MOFs with FeP for the synthesis of Fe-N-C electrocatalysts has not been reported prior to this study. This study offers a new avenue to manipulate the density of Fe-N-C sites of electrocatalysts, which may be applied to other composite MOFs with various functionalities.

Effect of porphyrin metal center on synthesis, structure, morphology and oxygen reduction properties of porphyrin encapsulated metal organic frameworks

A series of different metal centered 5,15-Bis(4-aminophenyl)-10,20-bis(4-bromophenyl)porphyrins (PorM) where M = H2, MnOAc, FeCl, Co or Zn were synthesized, and then encapsulated in zeolite imidazole framework-8 (ZIF-8) by typical template directed strategy to generate PorM@ZIF-8 metal organic frameworks (MOFs). These composites were characterized by UV-vis, FTIR, XRD, FESEM and HRTEM methods. Each prepared PorM@ZIF-8 MOF retained the molecular structure of porphyrin and crystal structure of ZIF-8. It is clearly shown that porphyrin centered metal ions will affect MOFs morphology. Both PorH2@ZIF-8 and PorZn@ZIF-8 gave a rhombic dodecahedron, PorMnOAc@ZIF-8 gave a truncated hexagonal prism-like structure, while no specific structures were obtained for PorFeCl@ZIF-8 and PorCo@ZIF-8 due to aggregation as characterized by FESEM spectrum. Oxygen reduction catalytic ability of ZIF-8, PorM and PorM@ZIF-8 were measured in alkaline condition (0.1 M KOH) with the number of electrons transferred being [Formula: see text] = 2.20–2.60 and generating HO[Formula: see text] as the oxygen reduction product. The catalytic property slightly increased after the porphyrin was encapsulated, due possibly to the capacity limit, inappropriate molecular distance or the direction of encapsulated porphyrin molecular.