Crystallization Behavior of Copolyesters Containing Sulfonates

The polar sulfonate groups in cationic dyeable polyester (CDP) lead to complex crystallization behavior, affecting CDP production's stability. In this study, cationic dyeable polyesters (CDP) with different sulfonate group contents were prepared via one-step feeding of sodium isophthalic acid-5-sulfonate (SIPA), terephthalic acid (PTA), and ethylene glycol (EG). The non-isothermal crystallization behavior of these copolyesters was analyzed by differential scanning calorimetry (DSC). Results show that the crystallization temperature of the sample shifts to lower values with the increase in SIPA content. The relaxation behavior of the molecular chain is enhanced due to the ionic aggregation effect of sulfonate groups in CDP. Therefore, at low cooling rates (2.5 °C/min and 5 °C/min), some molecular chain segments in CDP are still too late to orderly stack into the lattice, forming metastable crystals, and melting double peaks appear on the melting curve after crystallization. When the cooling rate increases (10-20 °C/min), the limited region of sulfonate aggregation in CDP increases, resulting in more random chain segments, and a cold crystallization peak appears on the melting curve after crystallization. The non-isothermal crystallization behavior of all samples was fitted and analyzed by the Jeziorny equation, Ozawa equation, and Mo equation. The results indicate that the nucleation density and nucleation growth rate of CDP decrease with the increase in SIPA content. Meanwhile, analysis of the Kissinger equation reveals that the activation energy of non-isothermal crystallization decreases gradually with the increase in SIPA content, and the addition of SIPA makes CDP crystallization more difficult.

From ionic clusters dynamics to network constraints in ionic polymer solutions

Physical networks formed by ionizable polymers with ionic clusters as crosslinks are controlled by coupled dynamics that transcend from ionic clusters through chain motion to macroscopic response. Here, the coupled dynamics, across length scales, from the ionic clusters to the networks in toluene swollen polystyrene sulfonate networks, were directly correlated, as the electrostatic environment of the physical crosslinks was altered. The multiscale insight is attained by coupling neutron spin echo measurements with molecular dynamics simulations, carried out to times typical of relaxation of polymers in solutions. The experimental dynamic structure factor is in outstanding agreement with the one calculated from computer simulations, as the networks are perturbed by elevating the temperature and changing the electrostatic environment. In toluene, the long-lived clusters remain stable over hundreds of ns across a broad temperature range, while the polymer network remains dynamic. Though the size of the clusters changes as the dielectric constant of the solvent is modified through the addition of ethanol, they remain stable but morph, enhancing the polymer chain dynamics.

Enhanced ionic conductivity in block copolymer electrolytes through interfacial passivation using mixed ionic liquids

We present a strategic approach for enhancing the ionic conductivity of block copolymer electrolytes. This was achieved by introducing mixed ionic liquids (ILs) with varying molar ratios, wherein the imidazolium cation was paired with either tetrafluoroborate (BF4) anion or bis(trifluoromethylsulfonyl)imide (TFSI) anion. Two polymer matrices, poly(4-styrenesulfonate)-b-polymethylbutylene (SSMB) and poly(4-styrenesulfonyl (trifluoromethanesulfonyl)imide)-b-polymethylbutylene (STMB), were synthesized for this purpose. All the SSMB and STMB containing mixed ILs showed hexagonal cylindrical structures, but the type of tethered acid group significantly influenced the interfacial properties. STMB electrolytes demonstrated enhanced segregation strength, which was attributed to strengthened Coulomb and hydrogen bonding interactions in the ionic domains, where the ILs were uniformly distributed. In contrast, the SSMB electrolytes exhibited increased concentration fluctuations because the BF4 anions were selectively sequestered at the block interfaces. This resulted in the effective confinement of imidazolium TFSI along the ionic domains, thereby preventing ion trapping in dead zones and facilitating rapid ion diffusion. Consequently, the SSMB electrolytes with mixed ILs demonstrated significantly improved ionic conductivities, surpassing the expected values based on the arithmetic average of the conductivities of each IL, whereas the ionic conductivity of the STMB was aligned with the expected average. The methodology explored in this study holds great promise for the development of solid-state polymer electrolytes.

Toward Long-Term-Dispersible, Metal-Free Single-Chain Nanoparticles

We report herein on a new platform for synthesizing stable, inert, and dispersible metal-free single-chain nanoparticles (SCNPs) via intramolecular metal-traceless azide-alkyne click chemistry. It is well known that SCNPs synthesized via Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) often experience metal-induced aggregation issues during storage. Moreover, the presence of metal traces limits its use in a number of potential applications. To address these problems, we selected a bifunctional cross-linker molecule, sym-dibenzo-1,5-cyclooctadiene-3,7-diyne (DIBOD). DIBOD has two highly strained alkyne bonds that allow for the synthesis of metal-free SCNPs. We demonstrate the utility of this new approach by synthesizing metal-free polystyrene (PS)-SCNPs without significant aggregation issues during storage, as demonstrated by small-angle X-ray scattering (SAXS) experiments. Notably, this method paves the way for the synthesis of long-term-dispersible, metal-free SCNPs from potentially any polymer precursor decorated with azide functional groups.

New Facet in Viscometry of Charged Associating Polymer Systems in Dilute Solutions

The peculiarities of viscosity data treatment for two series of polymer systems exhibiting associative properties: brush-like amphiphilic copolymers-charged alkylated N-methyl-N-vinylacetamide and N-methyl-N-vinylamine copolymer (MVAA-co-MVAC_nH_2n+1) and charged chains of sodium polystyrene-4-sulfonate (PSSNa) in large-scale molecular masses (MM) and in extreme-scale of the ionic strength of solutions were considered in this study. The interest in amphiphilic macromolecular systems is explained by the fact that they are considered as micellar-forming structures in aqueous solutions, and these structures are able to carry hydrophobic biologically active compounds. In the case of appearing the hydrophobic interactions, attention was paid to discussing convenient ways to extract the correct value of intrinsic viscosity η from the combined analysis of Kraemer and Huggins plots, which were considered as twin plots. Systems and situations were demonstrated where intrachain hydrophobic interactions occurred. The obtained data were discussed in terms of lnηr vs. cη plots as well as in terms of normalized scaling relationships where ηr was the relative viscosity of the polymer solution. The first plot allowed for the detection and calibration of hydrophobic interactions in polymer chains, while the second plot allowed for the monitoring of the change in the size of charged chains depending on the ionic strength of solutions.

Structure and Diffusion of Ionic PDMS Melts

Ionic polymers exhibit mechanical properties that can be widely tuned upon selectively charging them. However, the correlated structural and dynamical properties underlying the microscopic mechanism remain largely unexplored. Here, we investigate, for the first time, the structure and diffusion of randomly and end-functionalized ionic poly(dimethylsiloxane) (PDMS) melts with negatively charged bromide counterions, by means of atomistic molecular dynamics using a united atom model. In particular, we find that the density of the ionic PDMS melts exceeds the one of their neutral counterpart and increases as the charge density increases. The counterions are condensed to the cationic part of end-functionalized cationic PDMS chains, especially for the higher molecular weights, leading to a slow diffusion inside the melt; the counterions are also correlated more strongly to each other for the end-functionalized PDMS. Temperature has a weak effect on the counterion structure and leads to an Arrhenius type of behavior for the counterion diffusion coefficient. In addition, the charge density of PDMS chains enhances the diffusion of counterions especially at higher temperatures, but hinders PDMS chain dynamics. Neutral PDMS chains are shown to exhibit faster dynamics (diffusion) than ionic PDMS chains. These findings contribute to the theoretical description of the correlations between structure and dynamical properties of ion-containing polymers.

Potential of Functionalized Polyolefins in a Sustainable Polymer Economy: Synthetic Strategies and Applications

ConspectusPolymers play a crucial role in our modern life as no other material exists that is so versatile, moldable, and lightweight. Consequently, the demand for polymers will continue to grow with the human population, modernization, and technological developments. However, depleted fossil resources, increasing plastic waste production, ocean pollution, and related growing emission of greenhouse gases has led to a change in the way we think about the use of polymers. Although polymers were never designed to be recycled, it is clear that a linear polymers economy is no longer sustainable. The design for recycling and reuse and life-cycle analyses will become increasingly important factors when deciding on which polymer to choose for a certain application. Of all polymers, polyolefins have the lowest life-cycle environmental impact and even outperform renewable polymers. However, polyolefins are chemically inert and reveal a low surface energy. Combining their excellent mechanical properties with the ability to adhere to other materials or create self-assembled or nanostructured materials would widen the application window of polyolefins even more.This Account covers part of our personal account in the field of functionalized polyolefin synthesis and their application development. We start with addressing the challenge of finding suitable catalysts that tolerate nucleophilic functionalities, which tends to poison most electrophilic catalysts even when passivated with, for example, an aluminum alkyl. We argued that lowering of the oxidation state of a titanium-based catalyst might lower the electrophilicity of the metal center. Indeed, this simple approach resulted in an unprecedentedly high tolerance toward aluminum alkyl-passivated alkenols during their copolymerization with ethylene. Interestingly, catalyst deactivation was much less pronounced during the copolymerization of propylene and aluminum-passivated alkenols, clearly demonstrating the protective effect of the methyl branch in the growing polymer. Because the use of randomly functionalized polypropylenes is rather underdeveloped, as compared to the corresponding randomly functionalized polyethylenes, we focused on potential applications of the former material. Atactic or low-crystalline hydroxyl- and carboxylic acid-functionalized propylene-based co- and terpolymers form elastomers with interesting properties that can be influenced by enhancing the hydrogen bonding within the system or by creating ionomers. The polar functionalities cluster together in domains that can host small polar molecules such as, for example, a pH indicator, thus affording useful sensors. The functionalized polyolefins can also be used as precursors for amphiphilic graft copolymers, undergoing self-assembly and therefore being suitable for nanoporous membrane preparation. The graft copolymers also proved to be effective compatibilizers in various polymer blends.

Scalable Manufacturing of Solid Polymer Electrolytes with Superior Room-Temperature Ionic Conductivity

A scalable manufacturing protocol is developed to prepare polymer-based solvent-free all-solid flexible energy storage devices based on a two-roll mill and adapted rubber mixing technology. The as-prepared solid polymer electrolytes (SPEs) consisting of commercial poly(methyl methacrylate)-grafted natural rubber (MG30) and lithium bis(trifluoromethanesulfonyl)imide achieve a superior ionic conductivity of 2.7 × 10-3 S cm-1 at 30 °C. The superior ionic conductivity is attributed to the formation of an ionic cluster network in the composite as proved by small-angle X-ray scattering and infrared spectroscopy measurements. Moreover, the as-prepared SPEs show good mechanical stability over a broad temperature range, that is , a storage modulus above 1 × 104 Pa from 30 to 120 °C as indicated by the rheology data. Furthermore, the SPEs were assembled with the carbon black-filled MG30 (i.e., MG30C) electrode into a flexible supercapacitor cell, which had a wide voltage window of 3.5 V, good energy density of 28.4 μW h·cm-2 at 160 °C, and good temperature tolerance up to 160 °C. This scaling-up manufacture strategy shows tremendous potential to the advancing of SPEs in applications of flexible energy storage device.

Coarse-Grained Modeling of Ion-Containing Polymers

Ion-containing polymers have continued to be an important research focus for several decades due to their use as an electrolyte in energy storage and conversion devices. Elucidation of connections between the mesoscopic structure and multiscale dynamics of the ions and solvent remains incompletely understood. Coarse-grained modeling provides an efficient approach for exploring the structural and dynamical properties of these soft materials. The unique physicochemical properties of such polymers are of broad interest. In this review, we summarize the current development and understanding of the structure-property relationship of ion-containing polymers and provide insights into the design of such materials determined from coarse-grained modeling and simulations accompanying significant advances in experimental strategies. We specifically concentrate on three types of ion-containing polymers: proton exchange membranes (PEMs), anion exchange membranes (AEMs), and polymerized ionic liquids (polyILs). We posit that insight into the similarities and differences in these materials will lead to guidance in the rational design of high-performance novel materials with improved properties for various power source technologies.

Unravelling the Mechanism of Viscoelasticity in Polymers with Phase-Separated Dynamic Bonds

Incorporation of dynamic (reversible) bonds within polymer structure enables properties such as self-healing, shape transformation, and recyclability. These dynamic bonds, sometimes refer as stickers, can form clusters by phase-segregation from the polymer matrix. These systems can exhibit interesting viscoelastic properties with an unusually high and extremely long rubbery plateau. Understanding how viscoelastic properties of these materials are controlled by the hierarchical structure is crucial for engineering of recyclable materials for various future applications. Here we studied such systems made from short telechelic polydimethylsiloxane chains by employing a broad range of experimental techniques. We demonstrate that formation of a percolated network of interfacial layers surrounding clusters enhances mechanical modulus in these phase-separated systems, whereas single chain hopping between the clusters results in macroscopic flow. On the basis of the results, we formulated a general scenario describing viscoelastic properties of phase-separated dynamic polymers, which will foster development of recyclable materials with tunable rheological properties.

Glass transition of ion-containing polymer melts in bulk and thin films

Ion-containing polymers often are good glass formers, and the glass transition temperature is an important parameter to consider for practical applications, which prescribes the working temperature range for different mechanical and dynamic properties. In this work, we present a systematic molecular dynamics simulation study on the coupling of ionic correlations with the glass transition, based on a generic coarse-grained model of ionic polymers. The variation of the glass transition temperature is examined concerning the influence of the electrostatic interaction strength, charge fraction, and charge sequence. The interplay with the film thickness effect is also discussed. Our results reveal a few typical features about the glass transition process that are in qualitative agreement with previous studies, further highlighting the effects of counterion entropy at weak ionic correlations and physical crosslinking of ionic aggregates at strong ionic correlations. Detailed parametric dependencies are displayed, which demonstrate that introducing strong ionic correlations promotes vitrification while adopting a precise charge sequence and applying strong confinement with weak surface affinity reduce the glass transition temperature. Overall, our investigation provides an improved picture towards a comprehensive understanding of the glass transition in ion-containing polymeric systems from a molecular simulation perspective.

Polymers with Dynamic Bonds: Adaptive Functional Materials for a Sustainable Future

Polymeric materials play critical role in many current technologies. Among them, adaptive polymeric materials with dynamic (reversible) bonds exhibit unique properties and provide exciting opportunities for various future technologies. Dynamic bonds enable structural rearrangements in polymer networks in specific conditions. Replacement of a few covalent bonds by dynamic bonds can enhance polymeric properties, e.g., strongly improve the toughness and the adhesive properties of polymers. Moreover, they provide recyclability and enable new properties, such as self-healing and shape memory effects. We briefly overview new developments in the field of polymers with dynamic bonds and current understanding of their dynamic properties. We further highlight several examples of unique properties of polymers with dynamic bonds and provide our perspectives for them to be used in many current and future applications.

A Perspective on the Design of Ion-Containing Polymers for Polymer Electrolyte Applications

Ion-containing polymers have numerous potential applications as energy storage and conversion devices, water purification membranes, and gas separation membranes, to name a few. Given the low dielectric constant of the media, ions and charges on polymers in a molten state interact strongly producing large effects on chain statistics, thermodynamics, and diffusion properties. Here, we discuss recent research accomplishments on the effects of ionic correlation and dielectric heterogeneity on the phase behavior of ion-containing polymers. Progress made in studying ion transport properties in these material systems is also highlighted. Charged block copolymers (BCPs), among all kinds of ion-containing polymers, have a particular advantage owing to their robust mechanical support and ion conducting paths provided by the segregation of the neutral and charged blocks. Coulombic interactions among the charges play a critical role in determining the phase segregation in charged BCPs and the domain size of charge-rich regions. We show that strongly charged BCPs display ordered phases as a result of electrostatic interactions alone. In addition, bulky charge-containing side groups attached to the charged block lead to the formation of morphologies that provide continuous channels and better dissociation for ion conduction purposes. Finally, a few avenues for designing ion-containing polymers for energy applications are discussed.

100th Anniversary of Macromolecular Science Viewpoint: Block Copolymers with Tethered Acid Groups: Challenges and Opportunities

Scientific research on advanced polymer electrolytes has led to the emergence of all-solid-state energy storage/transfer systems. Early research began with acid-tethered polymers half a century ago, and research interest has gradually shifted to high-precision polymers with controllable acid functional groups and nanoscale morphologies. Consequently, various self-assembled acid-tethered block polymer morphologies have been produced. Their ion properties are profoundly affected by the multiscale intermolecular interactions in confinements. The creation of hierarchically organized ion/dipole arrangements inside the block copolymer nanostructures has been highlighted as a future method for developing advanced single-ion polymers with decoupled ion dynamics and polymer chain relaxation. Several emerging practical applications of the acid-tethered block copolymers have been explored to draw attention to the challenges and opportunities in developing state-of-the-art electrochemical systems.

Self-Assembly of Charge-Containing Copolymers at the Liquid-Liquid Interface

Quantitatively understanding the self-assembly of amphiphilic macromolecules at liquid-liquid interfaces is a fundamental scientific concern due to its relevance to a broad range of applications including bottom-up nanopatterning, protein encapsulation, oil recovery, drug delivery, and other technologies. Elucidating the mechanisms that drive assembly of amphiphilic macromolecules at liquid-liquid interfaces is challenging due to the combination of hydrophobic, hydrophilic, and Coulomb interactions, which require consideration of the dielectric mismatch, solvation effects, ionic correlations, and entropic factors. Here we investigate the self-assembly of a model block copolymer with various charge fractions at the chloroform-water interface. We analyze the adsorption and conformation of poly(styrene)-block-poly(2-vinylpyridine) (PS-b-P2VP) and of the homopolymer poly(2-vinylpyridine) (P2VP) with varying charge fraction, which is controlled via a quaternization reaction and distributed randomly along the backbone. Interfacial tension measurements show that the polymer adsorption increases only marginally at low charge fractions (<5%) but increases more significantly at higher charge fractions for the copolymer, while the corresponding randomly charged P2VP homopolymer analogues display much more sensitivity to the presence of charged groups. Molecular dynamics (MD) simulations of the experimental systems reveal that the diblock copolymer (PS-b-P2VP) interfacial activity could be mediated by the formation of a rich set of complex interfacial copolymer aggregates. Circular domains to elongated stripes are observed in the simulations at the water-chloroform interface as the charge fraction increases. These structures are shown to resemble the spherical and cylindrical helicoid structures observed in bulk chloroform as the charge fraction increases. The self-assembly of charge-containing copolymers is found to be driven by the association of the charged component in the hydrophilic block, with the hydrophobic segments extending away from the hydrophilic cores into the chloroform phase.

The evolution of acidic and ionic aggregates in ionomers during microsecond simulations

We performed microsecond-long, atomistic molecular dynamics simulations on a series of precise poly(ethylene-co-acrylic acid) ionomers neutralized with lithium, with three different spacer lengths between acid groups on the ionomers and at two temperatures. Ionic aggregates form in these systems with a variety of shapes ranging from isolated aggregates to percolated aggregates. At the lower temperature of 423 K, the ionic aggregate morphologies do not reach a steady-state distribution over the course of the simulations. At the higher temperature of 600 K, the aggregates are sufficiently mobile that they rearrange and reach steady state after hundreds of nanoseconds. For systems that are 100% neutralized with lithium, the ions form percolated aggregates that span the simulation box in three directions, for all three spacer lengths (9, 15, and 21). In the partially neutralized systems, the morphology includes lithium ion aggregates that may also include some unneutralized acid groups, along with a coexisting population of acid group aggregates that form through hydrogen bonding. In the lithium ion aggregates, unneutralized acid groups tend to be found on the ends or sides of the aggregates.

Ionic Liquid-Grafted Polyamide 6 by Radiation-Induced Grafting: New Strategy To Prepare Covalently Bonded Ion-Containing Polymers and their Application as Functional Fibers

Ion-containing polymers are of great importance for its unique structure and properties. An ion-containing polyamide 6 (PA6) was prepared by grafting an ionic liquid, 1-vinyl-3-butyl imidazole chloride [VBIM][Cl], onto the main chain of PA6 using radiation-induced grafting. The grafted ions on the PA6 main chain significantly influenced the structure and properties of the PA6 matrix. The ions form nanoscale aggregations without inducing further microphase separation. Acting as a physical "cross-linking point," each aggregation enhanced inter/intrachain interactions, which increased the viscosity, storage modulus, and relaxation time and reduced the ability of PA6 to crystallize. However, the bulky cations of the grafted ionic liquid can also be seen as "spacers," which enlarge the distance among chains and reduce the strength of the hydrogen bonds inherently existing in the PA6 matrix. The "cross-linking points" and "spacers" of ions as well as the hydrogen bonds of PA6 take effect collectively in the system. Moreover, the ion-containing PA6 retains good melt processability compared with PA6, despite increased viscosity, and can be easily melt-spun into fibers. Fibers prepared from ion-containing PA6 showed improved mechanical properties and antistatic performance and exhibited the expected antibacterial properties, especially with regard to Escherichia coli. Inspiringly, covalently bonding ions to the PA6 main chain offers a new strategy for fabricating functional fibers with permanent antistatic and antibacterial properties.

Enhanced scattering induced by electrostatic correlations in concentrated solutions of salt-free dipolar and ionic polymers

We present a generalized theory for studying the static monomer density-density correlation function (structure factor) in concentrated solutions and melts of dipolar as well as ionic polymers. The theory captures effects of electrostatic fluctuations on the structure factor and provides insights into the origin of experimentally observed enhanced scattering at ultralow wavevectors in salt-free ionic polymers. It is shown that the enhanced scattering can originate from a coupling between the fluctuations of electric polarization and monomer density. Local and non-local effects of the polarization resulting from finite sized permanent dipoles and ion-pairs in dipolar and charge regulating ionic polymers, respectively, are considered. Theoretical calculations reveal that, similar to the salt-free ionic polymers, the structure factor for dipolar polymers can also exhibit a peak at a finite wavevector and enhanced scattering at ultralow wavevectors. Although consideration of dipolar interactions leads to attractive interactions between monomers, the enhanced scattering at ultralow wavevectors is predicted solely on the basis of the electrostatics of weakly inhomogeneous dipolar and ionic polymers without considering the effects of any aggregates or phase separation. Thus, we conclude that neither aggregation nor phase separation is necessary for observing the enhanced scattering at ultralow wavevectors in salt-free dipolar and ionic polymers. For charge regulating ionic polymers, it is shown that electrostatic interactions between charged monomers get screened with a screening length, which depends not only on the concentration of "free" counterions and coions, but also on the concentration of "adsorbed" ions on the polymer chains. Qualitative comparisons with the experimental scattering curves for ionic and dipolar polymer melts are presented using the theory developed in this work.

Influence of a nanoparticle on the structure and dynamics of model ionomer melts

We simulate a single spherical nanoparticle (NP) surrounded by partially neutralized ionomers. The coarse-grained ionomers consist of a linear backbone of neutral monomer beads with charged pendant beads and counterions, along with pendant 'sticker' beads that represent unneutralized acid groups. Two different NP interactions are considered; one in which the NP interacts uniformly with all beads in the system (neutral NP) and another in which the NP has higher cohesive interactions with ions and stickers (sticky NP). Ions are depleted around the neutral NP relative to the bulk, but are denser around the surface of the sticky NP. The bond vector autocorrelation function was computed as a function of distance from the NP. For the neutral NP, due to the absence of ions, there is an increase in bond rotational dynamics near the surface relative to the bulk, while the reverse trend is observed in the case of the sticky NP. These analyses were done systematically for differing mole content of pendants, levels of neutralization, and NP sizes; lower pendant content causes a significantly larger difference in the bond dynamics near and far from the NP surface.

Ionic Correlations in Random Ionomers

Understanding the electrostatic interactions in ion-containing polymers is crucial to better design shape memory polymers and ion-conducting membranes for multiple energy storage and conversion applications. In molten polymers, the dielectric permittivity is low, generating strong ionic correlations that lead to clustering of the charges. Here, we investigate the influence of electrostatic interactions on the nanostructure of randomly charged polymers (ionomers) using coarse-grained molecular dynamics simulations. Densely packed branched structures rich in charged species are found as the strength of the electrostatic interactions increases. Polydispersity in charge fraction and composition combined with ion correlations leads to percolated nanostructures with long-range fluctuations. We identify the percolation point at which the ionic branched nanostructures percolate and offer a rigorous investigation of the statistics of the shape of the aggregates. The extra degree of freedom introduced by the charge polydispersity leads to bicontinuous structures with a broad range of compositions, similar to neutral A-B random copolymers, as well as to desirable percolated ionic structure in randomly charged-neutral diblock copolymers. These findings provide insight into the design of conducting and robust nanostructures in ion-containing polymers.

Structure design, fabrication and property investigation of water-based polyesters with notable surface hydrophilicity

Environmentally friendly waterborne polyesters (WPEs) were obtained by copolymerization of diethylene glycol (DEG), isophthalic acid (IPA) and 5-sulfoisophthalic acid monosodium salt (5-SSIPA).

High Morphological Order in a Nearly Precise Acid-Containing Polymer and Ionomer

Linear polyethylenes with functional groups at precise intervals along the backbone possess a number of remarkable properties, but the current synthetic methods that produce these precise polymers are difficult to scale up beyond the laboratory setting. When evaluating alternative synthetic routes, a critical question is how precise must the polymer microstructure be to achieve the properties of interest? As a first step in answering this question, we present morphological characterization of a nearly precise polymer-that is, an acid-containing polymer wherein the acid groups are separated by either n or n + 1 methylene groups. We find that the size scale and uniformity of the amorphous morphologies of the nearly precise acid-containing polymer and its sodium-neutralized ionomer are essentially indistinguishable from the precise polymers based on X-ray scattering. Meanwhile, the nearly precise polymer is strikingly distinct from a pseudorandom copolymer with similar average composition. This result suggests that the properties of nearly precise polymers could likewise be quite similar to truly precise polymers and beckons future work to explore their properties.