Prussian Blue Anchored on Reduced Graphene Oxide Substrate Achieving High Voltage in Symmetric Supercapacitor

In this work, iron hexacyanoferrate (FeHCF-Prussian blue) particles have been grown onto a reduced graphene oxide substrate through a pulsed electrodeposition process. Thus, the prepared FeHCF electrode exhibits a specific volumetric capacitance of 88 F cm-3 (specific areal capacitance of 26.6 mF cm-2) and high cycling stability with a capacitance retention of 93.7% over 10,000 galvanostatic charge-discharge cycles in a 1 M KCl electrolyte. Furthermore, two identical FeHCF electrodes were paired up in order to construct a symmetrical supercapacitor, which delivers a wide potential window of 2 V in a 1 M KCl electrolyte and demonstrates a large energy density of 27.5 mWh cm-3 at a high power density of 330 W cm-3.

Protonated C3N4 Nanosheets for Enhanced Energy Storage in Symmetric Supercapacitors through Hydrochloric Acid Treatment

Next-generation electrochemical energy storage materials are essential in delivering high power for long periods of time. Double-layer carbonaceous materials provide high power density with low energy density due to surface-controlled adsorption. This limitation can be overcome by developing a low-cost, more abundant material that delivers high energy and power density. Herein, we develop layered C3N4 as a sustainable charge storage material for supercapacitor applications. It was thermally polymerized using urea and then protonated with various acids to enhance its charge storage contribution by activating more reaction sites through the exfoliation of the C-N framework. The increased electron-rich nitrogen moieties in the C-N framework material lead to better electrolytic ion impregnation into the electrode, resulting in a 7-fold increase in charge storage compared to the pristine material and other acids. It was found that C3N4 treated with hydrochloric acid showed a very high capacitance of 761 F g-1 at a current density of 20 A g-1 and maintained 100% cyclic retention over 10,000 cycles in a three-electrode configuration, outperforming both the pristine material and other acids. A symmetric device was fabricated using a KOH/LiI gel-based electrolyte, exhibiting a maximum specific capacitance of 175 F g-1 at a current density of 1 A g-1. Additionally, the device showed remarkable power and energy density, reaching 600 W kg-1 and 35 Wh kg-1, with an exceptional cyclic stability of 60% even after 5000 cycles. This study provides an archetype to understand the underlying mechanism of acid protonation and paves the way to a metal-carbon-free environment.

Laser-Induced Electron Synchronization Excitation for Photochemical Synthesis and Patterning Graphene-Based Electrode

Micro-supercapacitors (MSCs) represent a pressing requirement for powering the forthcoming generation of micro-electronic devices. The simultaneous realization of high-efficiency synthesis of electrode materials and precision patterning for MSCs in a single step presents an ardent need, yet it poses a formidable challenge. Herein, a unique shaped laser-induced patterned electron synchronization excitation strategy has been put forward to photochemical synthesis RuO2 /reduced graphene oxide (rGO) electrode and simultaneously manufacture the micron-scale high-performance MSCs with ultra-high resolution. Significantly, the technique represents a noteworthy advancement over traditional laser direct writing (LDW) patterning and photoinduced synthetic electrode methods. It not only improves the processing efficiency for MSCs and the controllability of laser-induced electrode material but also enhances electric fields and potentials at the interface for better electrochemical performance. The resultant MSCs exhibit excellent area and volumetric capacitance (516 mF cm-2 and 1720 F cm-3 ), and ultrahigh energy density (0.41 Wh cm-3 ) and well-cycle stability (retaining 95% capacitance after 12000 cycles). This investigation establishes a novel avenue for electrode design and underscores substantial potential in the fabrication of diverse microelectronic devices.

Advances in Printed Electronic Textiles

Electronic textiles (e-textiles) have emerged as a revolutionary solution for personalized healthcare, enabling the continuous collection and communication of diverse physiological parameters when seamlessly integrated with the human body. Among various methods employed to create wearable e-textiles, printing offers unparalleled flexibility and comfort, seamlessly integrating wearables into garments. This has spurred growing research interest in printed e-textiles, due to their vast design versatility, material options, fabrication techniques, and wide-ranging applications. Here, a comprehensive overview of the crucial considerations in fabricating printed e-textiles is provided, encompassing the selection of conductive materials and substrates, as well as the essential pre- and post-treatments involved. Furthermore, the diverse printing techniques and the specific requirements are discussed, highlighting the advantages and limitations of each method. Additionally, the multitude of wearable applications made possible by printed e-textiles is explored, such as their integration as various sensors, supercapacitors, and heated garments. Finally, a forward-looking perspective is provided, discussing future prospects and emerging trends in the realm of printed wearable e-textiles. As advancements in materials science, printing technologies, and design innovation continue to unfold, the transformative potential of printed e-textiles in healthcare and beyond is poised to revolutionize the way wearable technology interacts and benefits.

Analyzing synthesis routes for BaCuPO4: implications for hydrogen evolution and supercapattery performance

In recent years, energy storage and conversion tools have evolved significantly in response to rising energy demands. Owing to their large surface area, superior electric and chemical stabilities, and thermal conductivities, barium copper phosphate (BaCuPO4) materials are promising electrode materials for electrochemical energy storage systems. In this study, the synthesis of nanostructures (NSs) using hydrothermal and chemical precipitation methods and exploring the electrochemical characteristics of BaCuPO4 in asymmetric supercapacitors provides a comparative investigation. Systematic characterization shows that nanomaterials prepared by applying the hydrothermal method have a more crystalline and large surface area than chemical precipitation. In the three cell arrangements, the hydrothermally prepared BaCuPO4 NSs delivered a high specific capacity (764.4 C g-1) compared to the chemical precipitation route (660 C g-1). Additionally, the supercapattery associated with the two electrode assemblages delivers an optimum specific capacity of 77 C g-1. The energy and power density of BaCuPO4//AC NSs were 52.13 W h kg-1 and 950 W kg-1, respectively. A durability test was also performed with BaCuPO4//AC NSs for 5000 consecutive cycles. Further, the coulombic efficiency and capacity retention of BaCuPO4//AC after 5000 cycles were 81% and 92%, respectively. Bimetallic phosphate is comparatively suggested for future perspectives towards HER to overcome the performance of single metal phosphate materials. This is the first approach, we are aware of, for investigating the electrochemical behavior of BaCuPO4, and our results suggest that it may be useful as an electrode material in electrochemical systems requiring high energy and rate capabilities.

The mineral manaksite, KNaMnSi4O10, as a supercapattery-type electrochemical energy storage material

The manaksite mineral KNaMnSi4O10 was synthesized and used to fabricate electrodes, which were investigated for electrochemical energy storage (EES) application using cyclic voltammetry (CV), galvanostatic charge and discharge (GCD), and electrochemical impedance spectroscopy (EIS). Optimum weight percentages (wt%) of electrode components were established as 10 wt% polytetrafluoroethylene (PTFE) binder, 15 wt% RuO2 and 5 wt% carbon black. RuO2 was added to improve electrical conductivity. A ratio of 13 : 3 for KNaMnSi4O10 : RuO2 was used in the fabrication of the electrode. A study of the suitable electrolyte and corresponding concentration to use was done using NaOH and KOH, both at concentrations of 1 M, 3 M and 6 M, with 3 M NaOH as the optimum electrolyte and concentration. The KNaMnSi4O10 yielded a specific capacity of 106 mA h g-1. An investigation into the energy storage mechanism from a plot of log I(ν) vs. log ν, where I is current and ν is the scan rate gave a b value parameter of 0.8; that is, in-between 0.5 obtained for a pure battery material and 1.0 for a pure capacitor material. Accordingly, KNaMnSi4O10 exhibited a battery-supercapacitor duality phenomenon consistent with supercapattery materials. The KNaMnSi4O10 electrochemical system involved both capacitive and diffusion-controlled processes and was found to have good cyclic stability. It is concluded that KNaMnSi4O10 is a potential electrochemical energy storage material.

Review of Design Routines of MXene Materials for Magnesium-Ion Energy Storage Device

Renewable energy storage using electrochemical storage devices is extensively used in various field applications. High-power density supercapacitors and high-energy density rechargeable batteries are some of the most effective devices, while lithium-ion batteries (LIBs) are the most common. Due to the scarcity of Li resources and serious safety concerns during the construction of LIBs, development of safer and cheaper technologies with high performance is warranted. Magnesium is one of the most abundant and replaceable elements on earth, and it is safe as it does not generate dendrite following cycling. However, the lack of suitable electrode materials remains a critical issue in developing electrochemical energy storage devices. 2D MXenes can be used to construct composites with different dimensions, owing to their suitable physicochemical properties and unique magnesium-ion adsorption structure. In this study, the construction strategies of MXene in different dimensions, including its physicochemical properties as an electrode material in magnesium ion energy storage devices are reviewed. Research advancements of MXene and MXene-based composites in various kinds of magnesium-ion storage devices are also analyzed to understand its energy storage mechanisms. Finally, current opportunities, challenges, and future prospects are also briefly discussed to provide crucial information for future research.

Synthesis of non-planar graphene-wrapped copper nanoparticles with iron(III) oxide decoration for high performance supercapacitors

The performance of supercapacitors strongly depends on the electrochemical characterizations of electrode materials. Herein, a composite material consisted of iron(III) oxide (Fe₂O₃) and multilayer graphene-wrapped copper nanoparticles (Fe₂O₃/MLG-Cu NPs) is fabricated on a flexible carbon cloth (CC) substrate via two-step synthesis process for supercapacitor application. Where, MLG-Cu NPs are prepared on CC by one-step chemical vapor deposition synthesis approach; thereafter, the Fe₂O₃is further deposited on the MLG-Cu NPs/CC via successive ionic layer adsorption and reaction method. The related material characterizations of Fe₂O₃/MLG-Cu NPs are well investigated by scanning electron microscopic, high resolution transmission electron microscopy), Raman spectrometer and X-ray photoelectron spectroscopy; the electrochemical behaviors of the pertinent electrodes are studied by cyclic voltammogram, galvanostatic charge/discharge (GCD) and electrochemical impedance spectroscopy measurements. The flexible electrode with Fe₂O₃/MLG-Cu NPs composites exhibits the best specific capacitance of 1092.6 mF cm^-2at 1 A g^-1, which is much higher than those of electrodes with Fe₂O₃(863.7 mF cm^-2), MLG-Cu NPs (257.4 mF cm^-2), multilayer graphene hollow balls (MLGHBs, 14.4 mF cm^-2) and Fe₂O₃/MLGHBs (287.2 mF cm^-2). Fe₂O₃/MLG-Cu NPs electrode also exhibits an excellent GCD durability, and its capacitance remains 88% of its original value after 5000 cycles of the GCD process. Finally, a supercapacitor system consisted of four Fe₂O₃/MLG-Cu NPs/CC electrodes can efficiently power various light-emitting diodes (i.e. red, yellow, green, and blue lights), demonstrating the practical application of Fe₂O₃/MLG-Cu NPs/CC electrode.

Designed formation of C/Fe3O4@Ni(OH)2 cathode with enhanced pseudocapacitance for asymmetric supercapacitors

The rational design and synthesis of advanced electrode materials are significant for the applications of supercapacitors. Ferroferric oxide (Fe₃O₄), with its high theoretical capacitance is a renowned cathode material. Nevertheless, its low electronic conductivity and poor cycling stability during a long-term charge/discharge process limit its large-scale applications. In this work, the precise modulation of multiple components was reported to enhance electrochemical performance. The ternary heterostructures were fabricated by wrapping ultrathin nickel hydroxide (Ni(OH)₂) nanosheets on the surfaces of Fe₃O₄ nanoparticles-loaded on sodium carboxymethyl cellulose (CMC)-derived porous carbon, named as C/Fe₃O₄@Ni(OH)₂. Due to the large specific surface area and excellent conductivity of CMC-derived porous carbon and the abundant reaction sites of Ni(OH)₂ nanosheets, the optimized C/Fe₃O₄@Ni(OH)₂-1.0 sample exhibited the highest specific capacitance of 3072F g^-1 at a current density of 0.5 A g^-1. Furthermore, the assembled asymmetric supercapacitor (ASC) with activated carbon and C/Fe₃O₄@Ni(OH)₂-1.0 as the negative and positive electrodes, respectively, showed an energy density of 123 W h kg^-1 at 381 W kg^-1, and a long-life stability with an excellent capacitance retention of 90.04 % after 10,000 cycles. The route for preparing composite electrode materials proposed in this work provides a reference for realizing high-performance energy storage devices.

Carbon Materials as a Conductive Skeleton for Supercapacitor Electrode Applications: A Review

Supercapacitors have become a popular form of energy-storage device in the current energy and environmental landscape, and their performance is heavily reliant on the electrode materials used. Carbon-based electrodes are highly desirable due to their low cost and their abundance in various forms, as well as their ability to easily alter conductivity and surface area. Many studies have been conducted to enhance the performance of carbon-based supercapacitors by utilizing various carbon compounds, including pure carbon nanotubes and multistage carbon nanostructures as electrodes. These studies have examined the characteristics and potential applications of numerous pure carbon nanostructures and scrutinized the use of a wide variety of carbon nanomaterials, such as AC, CNTs, GR, CNCs, and others, to improve capacitance. Ultimately, this study provides a roadmap for producing high-quality supercapacitors using carbon-based electrodes.

Organic Supercapacitors as the Next Generation Energy Storage Device: Emergence, Opportunity, and Challenges

Harnessing new materials for developing high-energy storage devices set off research in the field of organic supercapacitors. Various attractive properties like high energy density, lower device weight, excellent cycling stability, and impressive pseudocapacitive nature make organic supercapacitors suitable candidates for high-end storage device applications. This review highlights the overall progress and future of organic supercapacitors. Sustainable energy production and storage depend on low cost, large supercapacitor packs with high energy density. Organic supercapacitors with high pseudocapacitance, lightweight form factor, and higher device potential are alternatives to other energy storage devices. There are many recent ongoing research works that focus on organic electrolytes along with the material aspect of organic supercapacitors. This review summarizes the current research status and the chemistry behind the storage mechanism in organic supercapacitors to overcome the challenges and achieve superior performance for future opportunities.

The Controllable Ratio of the Polyaniline-Needle-Shaped Manganese Dioxide for the High-Performance Supercapacitor Application

The nanohybrid development of metal oxide/conducting polymer as an energy storage material is an active research area, because of the device stability, conductive behavior, and easy fabrication. Herein, needle-like MnO₂ was coupled with polyaniline fabricated through chemical polymerization followed by the hydrothermal process. The characterization results show that MnO₂/polyaniline exhibited a needle-like morphology. Different characterization techniques such as X-ray diffraction patterns and scanning electron microscopy confirmed the formation of the MnO₂/polyaniline nanohybrids. The electrochemical performance, including cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), specific capacitance (C_sp), and cyclic stability, was examined using a three-electrode assembly cell. The optimized electrode displayed a C_sp of 522.20 F g^-1 at a current load of 1.0 A g^-1 compared with the other electrodes. The developed synergism during MnO₂/polyaniline fabrication provided enhanced conductive channels and stability during the charge-discharge process.

Smart Electronic Textile-Based Wearable Supercapacitors

Electronic textiles (e-textiles) have drawn significant attention from the scientific and engineering community as lightweight and comfortable next-generation wearable devices due to their ability to interface with the human body, and continuously monitor, collect, and communicate various physiological parameters. However, one of the major challenges for the commercialization and further growth of e-textiles is the lack of compatible power supply units. Thin and flexible supercapacitors (SCs), among various energy storage systems, are gaining consideration due to their salient features including excellent lifetime, lightweight, and high-power density. Textile-based SCs are thus an exciting energy storage solution to power smart gadgets integrated into clothing. Here, materials, fabrications, and characterization strategies for textile-based SCs are reviewed. The recent progress of textile-based SCs is then summarized in terms of their electrochemical performances, followed by the discussion on key parameters for their wearable electronics applications, including washability, flexibility, and scalability. Finally, the perspectives on their research and technological prospects to facilitate an essential step towards moving from laboratory-based flexible and wearable SCs to industrial-scale mass production are presented.

Ultra-Fine Ruthenium Oxide Quantum Dots/Reduced Graphene Oxide Composite as Electrodes for High-Performance Supercapacitors

This study synthesized ultra-fine nanometer-scaled ruthenium oxide (RuO2) quantum dots (QDs) on reduced graphene oxide (rGO) surface by a facile and rapid microwave-assisted hydrothermal approach. Benefiting from the synergistic effect of RuO2 and rGO, RuO2/rGO nanocomposite electrodes showed ultra-high capacitive performance. The impact of different RuO2 loadings in RuO2/rGO nanocomposite on their electrochemical performance was investigated by various characterizations. The composite RG-2 with 38 wt.% RuO2 loadings exhibited a specific capacitance of 1120 F g-1 at 1 A g-1. In addition, it has an excellent capacity retention rate of 84 % from 1A g-1 to 10 A g-1, and excellent cycling stability of 89% retention after 10,000 cycles, indicating fast ion-involved redox reactions on the nanocomposite surfaces. These results illustrate that RuO2/rGO composites prepared by this facile process can be an ideal candidate electrode for high-performance supercapacitors.

Rational design and microwave-assisted synthesis of a novel terthiophene derivative for facile preparation of binder-free polymer/metal oxide-based binary composite electrodes with high electrochemical performance

A simple and effective approach was reported for the preparation of binder-free conducting polymer/metal oxide binary composite electrode materials.

Reutilizing Methane Reforming Spent Catalysts as Efficient Overall Water-Splitting Electrocatalysts

It is extremely prudent and highly challenging to design a greener bifunctional electrocatalyst that shows effective electrocatalytic activity and high stability toward electrochemical water splitting. As several hundred tons of catalysts are annually deactivated by deposition of carbon, herein, we came up with a strategy to reutilize spent methane reforming catalysts that were deactivated by the formation of graphitic carbon (GC) and carbon nanofibers (CNF). An electrocatalyst was successfully synthesized by in situ deposition of noble metal-free MoS₂ over spent catalysts via a hydrothermal method that showed exceptional performance regarding the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). At 25 mA cm^-2, phenomenal OER overpotentials (η₂₅) of 128 and 154 mV and modest HER overpotentials of 186 and 207 mV were achieved for MoS₂@CNF and MoS₂@GC, respectively. Moreover, OER Tafel slopes of 41 and 71 mV dec^-1 and HER Tafel slopes of 99 and 107 mV dec^-1 were obtained for MoS₂@CNF and MoS₂@GC, respectively. Furthermore, the synthesized catalysts exhibited good long-term durability for about 18 h at 100 μA cm^-2 with unnoticeable changes in the linear sweep voltammetry (LSV) curve of the HER after 1000 cycles. The carbon on the spent catalyst increased the conductivity, while MoS₂ enhanced the electrocatalytic activity; hence, the synergistic effect of both materials resulted in enhanced electrocatalysts for overall water splitting. This work of synthesizing enhanced nanostructured electrocatalysts with minimal usage of inexpensive MoS₂ gives a rationale for engineering potent greener electrocatalysts.

Boosting Electrochemical Performance of Hematite Nanorods via Quenching-Induced Alkaline Earth Metal Ion Doping

Ion doping in transition metal oxides is always considered to be one of the most effective methods to obtain high-performance electrochemical supercapacitors because of the introduction of defective surfaces as well as the enhancement of electrical conductivity. Inspired by the smelting process, an ancient method, quenching is introduced for doping metal ions into transition metal oxides with intriguing physicochemical properties. Herein, as a proof of concept, α-Fe2O3 nanorods grown on carbon cloths (α-Fe2O3@CC) heated at 400 °C are rapidly put into different aqueous solutions of alkaline earth metal salts at 4 °C to obtain electrodes doped with different alkaline earth metal ions (M-Fe2O3@CC). Among them, Sr-Fe2O3@CC shows the best electrochemical capacitance, reaching 77.81 mF cm−2 at the current of 0.5 mA cm−2, which is 2.5 times that of α-Fe2O3@CC. The results demonstrate that quenching is a feasible new idea for improving the electrochemical performances of nanostructured materials.

Charge-storage mechanism of highly defective NiO nanostructures on carbon nanofibers in electrochemical supercapacitors

An electrode composed of highly defective nickel oxide (NiO) nanostructures supported on carbon nanofibers (CNFs) and immersed in an Li+-based aqueous electrolyte is studied using Raman spectroscopy under dynamic polarization conditions to address the charge-storage phenomenon. By this operando technique, the formation of Li2SO4·H2O during the discharge process is verified. At the same time, we observed the phase transformation of NiO to NiOOH. The Ni(OH)2/NiOOH redox couple is responsible for the pseudocapacitive behavior with intercalation of cationic species in the different Ni structures. A 'substitutive solid-state redox reaction' is proposed to represent the amphoteric nature of the oxide, resulting in proton intercalation, while the insertion of Li+ occurs to a less extent. The electrode material exhibits outstanding stability with 98% coulombic efficiency after 10 000 charge-discharge cycles. The excellent electrode properties can be ascribed to a synergism between CNFs and NiO, where the carbon nanostructures ensured rapid electron transport from the hydrated nickel nanoparticles. The NiO@CNF composite material is a promising candidate for future applications in aqueous-based supercapacitors. DFT simulation elucidates that compressive stress and Ni-site displacement lead to a decrease up-to 3.5-fold on the electron density map located onto the Ni-atom, which promotes NiO/Ni(OH)2/NiOOH transition.

Controllable synthesis of hydrangea-like NixSy hollow microflower all-solid-state asymmetric supercapacitor electrodes with enhanced performance by the synergistic effect of multiphase nickel

In this work, through controlling the urea content in the synthesis system, the nucleation rate of Ni_xS_y can be adjusted, and a series of Ni_xS_y with multiphase nickel and various sizes and surface morphologies can be achieved.

Lignin-based dual component additives as effective electrode material for energy management systems

A functional PbO-lignin electrode hydrid material composite was designed and manufactured. Moreover, its connection efficiency was confirmed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). We noted that the superficial layers of PbO combined with layers of the biopolymer and that oxygen atoms present in both materials had influence on the chemical environment of the neighboring compound. Hence, it can be said that the addition of PbO significantly contributes to the improvement of thermal stability of the final inorganic-organic system. In the framework of the study, the dispersive, morphological and structural characteristics were determined using scanning electron microscopy (SEM) and laser diffraction method. Electrochemical studies indicated that the PbO-lignin material exhibits better electrochemical properties compared to PbO without the addition of kraft lignin (increased capacitance, lower charge transfer resistance), as the specific capacitance after 5000 charge/discharge cycles was still at 95% of the initial value. Such promising operating parameters show that this material can be successfully used as an electrode material for energy management systems.

A rational experimental approach to identify correctly the working voltage window of aqueous-based supercapacitors

It is common to find in the literature different values for the working voltage window (WVW) range for aqueous-based supercapacitors. In many cases, even with the best intentions of the widening the operating voltage window, the measured current using the cyclic voltammetry (CV) technique includes a significant contribution from the irreversible Faradaic reactions involved in the water-splitting process, masked by fast scan rates. Sometimes even using low scan rates is hard to determine precisely the correct WVW of the aqueous-based electrochemical capacitor. In this sense, we discuss here the best practices to determine the WVW for capacitive current in an absence of water splitting using complementary techniques such as CV, chronoamperometry (CA), and the electrochemical impedance spectroscopy (EIS). To accomplish this end, we prepare and present a model system composed of multiwalled carbon nanotubes buckypaper electrodes housed in the symmetric coin cell and soaked with an aqueous-based electrolyte. The system electrochemical characteristics are carefully evaluated during the progressive enlargement of the cell voltage window. The presence of residual Faradaic current is verified in the transients from the CA study, as well as the impedance changes revealed by EIS as a function of the applied voltage, is discussed. We verify that an apparent voltage window of 2.0 V determined using the CV technique is drastically decreased to 1.2 V after a close inspection of the CA findings used to discriminate the presence of a parasitic Faradaic process. Some orientations are presented to instigate the establishment in the literature of some good scientific practices concerned with the reliable characterization of supercapacitors.

Recognition of Ionic Liquids as High-Voltage Electrolytes for Supercapacitors

The electrochemical stability of electrolytes is essential to the working potential of supercapacitors. Ionic liquids (ILs) are being considered as safe alternatives to current organic electrolytes and attracting extensive interests owing to their inflammability, widened potential windows, and superior ionic conductivity. Novel supercapacitors with IL electrolytes exhibit attractive energy density and can be utilized in various energy storage systems. Most previous studies focused on electrochemical performances, while rare attentions were devoted to energy storage process details or mechanisms. This review comprehensively summarizes the latest progress on formulated IL electrolytes for different types of supercapacitors, with an emphasis on the intrinsic understanding of the related energy storage mechanisms. Subsequently, comparisons of various IL-based liquid-state electrolytes as well as the state-of-the-art advancements in optimizing ILs electrolytes are introduced. The authors attempt to reveal the inherent correlation between the usage of IL electrolytes and the properties of supercapacitors via referenced works. Some emerging applications of ionogel electrolytes based on conventional polymers and poly(IL)s for flexible supercapacitors are also presented, including the existing problems. In addition, challenges and future perspectives of research in this field are highlighted.

2.6 V aqueous symmetric supercapacitors based on phosphorus-doped TiO2 nanotube arrays

Increasing the voltage window of an electrode material is effective for improving the energy density of aqueous symmetric supercapacitors. Herein, a novel aqueous symmetric supercapacitor equipped with a high cell voltage window of 2.6 V was assembled by P-doped TiO₂ nanotube arrays on a Ti sheet. The arrays exhibit a wide potential range of about 1.2 V as the cathode, and a stable wide potential range of 1.4 V as the anode was also obtained. These wide potential windows in the cathode and anode render the symmetric supercapacitor with a very large working voltage window reaching 2.6 V, and thus a high volumetric energy density (1.65 mW h cm^-3). These results suggest that P-doped TiO₂ nanotube arrays can be promising candidates for energy storage devices.

Electrolyte selection for supercapacitive devices: a critical review

Electrolytes are one of the vital constituents of electrochemical energy storage devices and their physical and chemical properties play an important role in these devices' performance, including capacity, power density, rate performance, cyclability and safety. This article reviews the current state of understanding of the electrode-electrolyte interaction in supercapacitors and battery-supercapacitor hybrid devices. The article discusses factors that affect the overall performance of the devices such as the ionic conductivity, mobility, diffusion coefficient, radius of bare and hydrated spheres, ion solvation, viscosity, dielectric constant, electrochemical stability, thermal stability and dispersion interaction. The requirements needed to design better electrolytes and the challenges that still need to be addressed for building better supercapacitive devices for the competitive energy storage market have also been highlighted.

Fiber-Shaped Supercapacitors Fabricated Using Hierarchical Nanostructures of NiCo2O4 Nanoneedles and MnO2 Nanoflakes on Roughened Ni Wire

Electrostatic capacitors have high power density but low energy density. In contrast, batteries and fuel cells have high energy density but low power density. However, supercapacitors can simultaneously achieve both high power density and energy density. Herein, we propose a supercapacitor, in which etched nickel wire was used as a current collector due to its high conductivity. Two redox reactive materials, MnO2 nanoflakes and NiCo2O4 nanoneedles, were used in a hierarchical structure to cover the roughened surface of the Ni wire to maximize the effective surface area. Thus, a specific capacitance, energy density, and power density of 14.4 F/cm3, 2 mWh/cm3, and 0.1 W/cm3, respectively, was obtained via single-electrode experiments. A fiber-shaped supercapacitor was prepared by twisting two electrodes with solid electrolytes made of KOH and polyvinyl alcohol. Although the solid electrolyte had a low ionic conductivity, the energy density and power density were determined to be 0.97 mWh/cm3 and 49.8 mW/cm3, respectively.

An Efficient Electrochemical Sensor Driven by Hierarchical Hetero-Nanostructures Consisting of RuO2 Nanorods on WO3 Nanofibers for Detecting Biologically Relevant Molecules

By means of electrospinning with the thermal annealing process, we investigate a highly efficient sensing platform driven by a hierarchical hetero-nanostructure for the sensitive detection of biologically relevant molecules, consisting of single crystalline ruthenium dioxide nanorods (RuO₂ NRs) directly grown on the surface of electrospun tungsten trioxide nanofibers (WO₃ NFs). Electrochemical measurements reveal the enhanced electron transfer kinetics at the prepared RuO₂ NRs-WO₃ NFs hetero-nanostructures due to the incorporation of conductive RuO₂ NRs nanostructures with a high surface area, resulting in improved relevant electrochemical sensing performances for detecting H₂O₂ and L-ascorbic acid with high sensitivity.

Ionic liquids to monitor the nano-structuration and the surface functionalization of material electrodes: a proof of concept applied to cobalt oxyhydroxide

This paper reports on an innovative and efficient approach based on the use of ionic liquids to govern the nano-structuration of HCoO₂, in order to optimize the porosity and enhance the ionic diffusion through the electrode materials. In this work, we show that (1-pentyl-3-methyl-imidazolium bromide (PMIMBr) and 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF₄)) ionic liquids (ILs) used as templates during the synthesis orientate the nanoparticle aggregation which leads to increase of the porosity and the average pore size of the electrode material. It is also demonstrated that the ILs are strongly bonded to the HCoO₂ surface, leading to surface functionalized HCoO₂ materials, also called nanohybrids. This surface tailoring stabilizes the material upon cycling and shifts the oxidation potential linked to the Co(iii)/Co(iv) redox couple to lower voltage in an alkaline 5 M KOH electrolyte. The surface and porosity optimizations facilitate the ionic diffusion through the material, improve the electron transfer ability within the electrode and lead to greatly enhanced specific capacity in both alkaline 5 M-KOH and neutral 0.5 M-K₂SO₄ aqueous electrolytes (66.7 mA h g^-1 and 47.5 mA h g^-1 respectively for HCoO₂-PMIMBr and HCoO₂-EMIMBF₄ compared to 18.1 mA h g^-1 for bare HCoO₂ in 5 M-KOH at 1 A g^-1).

Recent Advances in Layer-by-Layer Assembled Conducting Polymer Based Composites for Supercapacitors

Development of well-designed electrodes is the key to achieve high performance supercapacitors. Therefore, as one of the effective methods, a layer-by-layer (LBL) approach is often fruitfully employed for the fabrication of electrode material. Benefiting from a tunable parameter of the LBL approach, this approach has paved a way to design a highly ordered nanostructured electrode material with excellent performance. Conducting polymers (CPs) are the frontrunners in supercapacitors and notably, the LBL assembly of CPs is attracting extensive attention. Therefore, this critical review covers a comprehensive discussion on the research progress of CP-based composites with special importance on the LBL approach predominately for supercapacitors. Following a brief discussion on supercapacitors and CPs, the most up-to-date techniques used in LBL are highlighted.

All-Solid-State Flexible Asymmetric Supercapacitor with Good Cycling Performance and Ultra-Power Density by Electrode Materials of Core-Shell CoNiO2@NiAl-Layered Double Hydroxide and Hollow Spherical α-Fe2O3

High electrochemical performance of asymmetric supercapacitor (ASC) depends on exquisite nanostructure design and synthesis of electrodes, including structural controllable design and synthesis of high theoretical performance materials and nanocomposite materials. Herein, a template-free hierarchical core-shell nanostructure of CoNiO₂@NiAl-layered double hydroxide (NiAl-LDH) and α-Fe₂O₃ with a hollow spherical structure composed of nanoparticles are successfully prepared. The CoNiO₂@NiAl-LDH as the cathode electrode and the hollow spherical α-Fe₂O₃ as the anode electrode of the ASC devices exhibit superior electrochemical performance. The gel of polyvinyl alcohol (PVA) and KOH acts as the solid electrolyte and the separator to assemble into the all-solid-state flexible ASC devices. Two of the CoNiO₂@NiAl-LDH//α-Fe₂O₃ ASC devices in series are fabricated to meet the voltage requirement of mobile energy equipment, which exhibit a maximum energy density of 65.68 Wh kg^-1 at the power density of 369.45 W kg^-1. Interestingly, in addition to many advantages that the solid electrolyte in ASC devices already have, we find that it can be an alternative way of solving the problem of iron oxide cycling performance, and of course it can also be used as a reference for other materials with poor cycling performance.

Nickel cobaltite@poly(3,4-ethylenedioxypyrrole) and carbon nanofiber interlayer based flexible supercapacitors

Binder free flexible symmetric supercapacitors are developed with nickel cobaltite micro-flower coated poly(3,4-ethylenedioxypyrrole) (NiCo2O4@PEDOP) hybrid electrodes. The free standing films of carbon nano-fibers (CNFs), synthesized by electrospinning, were sandwiched between the NiCo2O4@PEDOP hybrid and the electrolyte coated separators on both sides of the cells. The CNF film conducts both ions and electrons, and confines the charge at the respective electrodes, to result in an improved specific capacitance (SC) and energy density compared to the analogous cell without the CNF interlayers. A high SC of 1775 F g-1 at a low current density of 0.96 A g-1 and an SC of 634 F g-1 achieved at a high current density of 38 A g-1 coupled with an SC retention of ∼95% after 5000 charge-discharge cycles in the NCO@PEDOP/CNF based symmetric supercapacitor, are performance attributes superior to those achieved with NCO and NCO/CNF based symmetric cells. The PEDOP coating serves as a highly conductive matrix for the NCO micro-flowers and also undergoes doping/de-doping during the charge-discharge, thus amplifying the overall supercapacitor response, compared to the individual components. The CNF interlayers show reasonably high ion-diffusion coefficients for K+ and OH- propagation, implying facile pathways available for the movement of ions across the cross-section of the cell, and they also serve as ion reservoirs. The electrode morphologies remain unaffected by cycling in the presence of the CNF interlayer. LED illumination and a largely unaltered charge storage response were achieved in a mutli-cell configuration, proving the potential for this approach in practical applications.