Pathologically elevated cyclic hydrostatic pressure induces CD95-mediated apoptotic cell death in vascular endothelial cells

Emulating clinical pressure waveforms in cell culture using an Arduino-controlled millifluidic 3D-printed platform for 96-well plates

High blood pressure is the primary risk factor for heart disease, the leading cause of death globally. Despite this, current methods to replicate physiological pressures in vitro remain limited in sophistication and throughput. Single-chamber exposure systems allow for only one pressure condition to be studied at a time and the application of dynamic pressure waveforms is currently limited to simple sine, triangular, or square waves. Here, we introduce a high-throughput hydrostatic pressure exposure system for 96-well plates. The platform can deliver a fully-customizable pressure waveform to each column of the plate, for a total of 12 simultaneous conditions. Using clinical waveform data, we are able to replicate real patients' blood pressures as well as other medically-relevant pressures within the body and have assembled a small patient-derived waveform library of some key physiological locations. As a proof of concept, human umbilical vein endothelial cells (HUVECs) survived and proliferated for 3 days under a wide range of static and dynamic physiologic pressures ranging from 10 mm Hg to 400 mm Hg. Interestingly, pathologic and supraphysiologic pressure exposures did not inhibit cell proliferation. By integrating with, rather than replacing, ubiquitous lab cultureware it is our hope that this device will facilitate the incorporation of hydrostatic pressure into standard cell culture practice.

Strategies for Regenerative Vascular Tissue Engineering

Vascularization remains one of the key challenges in creating functional tissue-engineered constructs for therapeutic applications. This review aims to provide a developmental lens on the necessity of blood vessels in defining tissue function while exploring stem cells as a suitable source for vascular tissue engineering applications. The intersections of stem cell biology, material science, and engineering are explored as potential solutions for directing vascular assembly.

Integration of substrate- and flow-derived stresses in endothelial cell mechanobiology

Endothelial cells (ECs) lining all blood vessels are subjected to large mechanical stresses that regulate their structure and function in health and disease. Here, we review EC responses to substrate-derived biophysical cues, namely topography, curvature, and stiffness, as well as to flow-derived stresses, notably shear stress, pressure, and tensile stresses. Because these mechanical cues in vivo are coupled and are exerted simultaneously on ECs, we also review the effects of multiple cues and describe burgeoning in vitro approaches for elucidating how ECs integrate and interpret various mechanical stimuli. We conclude by highlighting key open questions and upcoming challenges in the field of EC mechanobiology.

Regulation of Epithelial Cell Functions by the Osmolality and Hydrostatic Pressure Gradients: A Possible Role of the Tight Junction as a Sensor

Epithelia act as a barrier to the external environment. The extracellular environment constantly changes, and the epithelia are required to regulate their function in accordance with the changes in the environment. It has been reported that a difference of the environment between the apical and basal sides of epithelia such as osmolality and hydrostatic pressure affects various epithelial functions including transepithelial transport, cytoskeleton, and cell proliferation. In this paper, we review the regulation of epithelial functions by the gradients of osmolality and hydrostatic pressure. We also examine the significance of this regulation in pathological conditions especially focusing on the role of the hydrostatic pressure gradient in the pathogenesis of carcinomas. Furthermore, we discuss the mechanism by which epithelia sense the osmotic and hydrostatic pressure gradients and the possible role of the tight junction as a sensor of the extracellular environment to regulate epithelial functions.

Mechanical stimuli modulate intracellular calcium oscillations: a pathological model without chemical cues

OBJECTIVE

To control the oscillatory behavior of the intracellular calcium ([Ca²⁺]_i) concentration in endothelial cells via mechanical factors (i.e., various hydrostatic pressures) because [Ca²⁺]_i in these cells is affected by blood pressure.

RESULTS

Quantitative analyses based on real-time imaging showed that [Ca²⁺]_i oscillation frequency and relative concentration increased significantly when 200 mm Hg pressure, mimicking hypertension, was applied for >10 min. Peak height and peak width decreased significantly at 200 mm Hg. These trends were more marked as the duration of the 200 mm Hg pressure was increased. However, no change was observed under normal blood pressure conditions 100 mm Hg.

CONCLUSION

We generated a simple in vitro model to study [Ca²⁺]_i behavior in relation to various pathologies and diseases by eliminating possible complicating effects induced by chemical cues.

Annulus fissures are mechanically and chemically conducive to the ingrowth of nerves and blood vessels

STUDY DESIGN

Mechanical and biochemical analyses of cadaveric and surgically removed discs.

OBJECTIVE

To test the hypothesis that fissures in the annulus of degenerated human discs are mechanically and chemically conducive to the ingrowth of nerves and blood vessels.

SUMMARY OF BACKGROUND DATA

Discogenic back pain is closely associated with fissures in the annulus fibrosus, and with the ingrowth of nerves and blood vessels.

METHODS

Three complementary studies were performed. First, 15 cadaveric discs that contained a major annulus fissure were subjected to 1 kN compression, while a miniature pressure transducer was pulled through the disc to obtain distributions of matrix compressive stress perpendicular to the fissure axis. Second, Safranin O staining was used to evaluate focal loss of proteoglycans from within annulus fissures in 25 surgically removed disc samples. Third, in 21 cadaveric discs, proteoglycans (sulfated glycosaminoglycans [sGAGs]) and water concentration were measured biochemically in disrupted regions of annulus containing 1 or more fissures, and in adjacent intact regions.

RESULTS

Reductions in compressive stress within annulus fissures averaged 36% to 46%, and could have been greater at the fissure axis. Stress reductions were greater in degenerated discs, and were inversely related to nucleus pressure (R(2) = 47%; P = 0.005). Safranin O stain intensity indicated that proteoglycan concentration was typically reduced by 40% at a distance of 600 μm from the fissure axis, and the width of the proteoglycan-depleted zone increased with age (P < 0.006; R(2) = 0.29) and with general proteoglycan loss (P < 0.001; R(2) = 0.32). Disrupted regions of annulus contained 36% to 54% less proteoglycans than adjacent intact regions from the same discs, although water content was reduced only slightly.

CONCLUSION

Annulus fissures provide a low-pressure microenvironment that allows focal proteoglycan loss, leaving a matrix that is conducive to nerve and blood vessel ingrowth.

Fluid pressure is a magnitude-dependent modulator of early endothelial tubulogenic activity: implications related to a potential tissue-engineering control parameter

A significant barrier to the success of engineered tissues is the inadequate transport of nutrients and gases to, and waste away from, cells within the constructs, after implantation. Generation of microtubular networks by endothelial cells in engineered constructs to mimic the in vivo transport scheme is essential for facilitating tissue survival by promoting the in vitro formation of microvessels that integrate with host microvasculature, after implantation. Previously, we reported that select pressures stimulate endothelial proliferation involving protubulogenic molecules such as fibroblast growth factor-2 (FGF-2) and vascular endothelial growth factor-C (VEGF-C). Based on this, we investigated fluid pressure as a selective modulator of early tubulogenic activity with the intent of assessing the potential utility of this mechanical stimulus as a tissue-engineering control parameter. For this purpose, we used a custom pressure system to expose two-dimensional (2D) and three-dimensional (3D) cultures of endothelial cells to static pressures of 0 (controls), 20, or 40 mmHg for 3 days. Compared to controls, 2D endothelial cultures exposed to 20, but not 40 mmHg, exhibited significantly (p<0.05) enhanced cell growth that depended on VEGF receptor-3 (VEGFR-3), a receptor for VEGF-C. Moreover, endothelial cells grown on microbeads and suspended in 3D collagen gels under 20 mmHg, but not 40 mmHg, displayed significantly (p<0.05) increased sprout formation. Interestingly, pressure-dependent proliferation and sprout formation occurred in parallel with pressure-sensitive upregulation of VEGF-C and VEGFR-3 expression and were sensitive to local FGF-2 levels. Collectively, the results of the present study provided evidence that early endothelial-related tubulogenic activity depends on local hydrostatic pressure levels in the context of local growth factor conditions. In addition to relevance to microvascular diseases associated with interstitial hypertension (e.g., cancer and glaucoma), these findings provided first insight into the potential utility of hydrostatic pressure as a fine-tune control parameter to optimize microvascularization of tissue-engineering constructs in the in vitro setting before their implantation.

Induction of chondrogenic phenotype in synovium-derived progenitor cells by intermittent hydrostatic pressure

OBJECTIVE

The aim of this study was to investigate the effect of intermittent hydrostatic pressure (IHP) on chondrogenic differentiation of synovium-derived progenitor cells (SPCs).

METHODS

SPCs, bone marrow-derived progenitor cells and skin fibroblasts from rabbits were subjected to IHP ranging from 1.0 to 5.0 MPa. The mRNA expression of proteoglycan core protein (PG), collagen type II and SOX-9 was examined using real-time reverse transcriptase-polymerase chain reaction (RT-PCR). The production of SOX-9 protein and glycosaminoglycan (GAG) by SPCs was analyzed by Western blot and the dimethylmethylene blue assay. In addition, mitogen-activated protein (MAP) kinase inhibitors for c-Jun N-terminal kinase (JNK), extracellular signal-regulated kinase (ERK), and the p38 pathway were used to identify the signal transduction pathways.

RESULTS

Real-time RT-PCR showed that mRNA expression of PG, collagen type II and SOX-9 was significantly enhanced only in SPCs receiving 5.0 MPa of IHP. The production of SOX-9 protein and GAG by SPCs was also increased by exposure to 5.0 MPa of IHP. These up-regulated expressions were suppressed by pretreatment with an inhibitor of JNK, but not with inhibitors of ERK or p38.

CONCLUSION

Our results demonstrated that the exposure of SPCs to 5.0 MPa of IHP could facilitate induction of the chondrogenic phenotype by the MAP kinase/JNK pathway. This finding suggests the potential for IHP utilization in regenerative treatments for cartilage injuries or osteoarthritis.

The role of hydrostatic pressure in foam cell formation upon exposure of macrophages to LDL and oxidized LDL

Hypertension is a major, established risk factor for atherosclerosis. How it interacts to exacerbate the cellular processes involved in atherogenesis is unclear. This initial, preliminary study examined how hydrostatic pressure influenced the formation of foam cells from human macrophages exposed to low-density lipoprotein (LDL) or oxidized LDL (OxLDL). The results demonstrated that both LDL and OxLDL, at physiological concentration, were taken up by cultured human macrophages and foam cells were formed. This led to cell detachment and death within 24h. These effects were more rapid and more pronounced in pressurized cultures. We conclude that exposure of cell cultures to cyclical hydrostatic pressure (CHP) aggravated the adverse effects of the lipids on the macrophages.

Evidence of Notch pathway activation in the ectatic ducts of chronic pancreatitis

Ductal concretions in chronic pancreatitis (CP) are one of the causes of ductal obstruction, resulting in pancreatic ductal hypertension (PDH) and duct ectasia. Ductal epithelium subjected to chronic stress by PDH may undergo molecular alterations, thereby not only initiating and sustaining the inflammatory process but also activating molecules that have transforming potential. Acino-ductal metaplasia and pancreatic intraepithelial neoplasia (PanIN) are frequently seen in CP. Using laser capture microdissection, cDNA microarrays and Ingenuity Pathways Analysis, we found an altered Notch pathway in the ectatic ducts of CP. The microarray data was further validated by real-time PCR. We also found elevated transcripts of Notch receptors, Notch1 and Notch3 in microdissected ectatic ducts of CP. The Notch pathway ligands, Jagged/Delta-like and a Notch target, HES-related repressor protein (HERP), were up-regulated in ectatic compared to normal pancreatic ducts, while another target of Notch, hairy/enhancer of split (HES), was down-regulated. The transcripts of Delta-like1 and Jagged1 were increased 3.7-fold and 1.3-fold, respectively, while those of HERP1 were elevated 2.4-fold in the ectatic ducts of CP, compared to normal ducts. Immunohistochemistry showed that Jagged1 was not expressed in normal pancreatic ducts, while it was highly expressed in ectatic ducts. This pattern of Notch component alteration in ectatic ducts was mimicked to some extent in vitro in a human pancreatic duct epithelial (HPDE) cell line, when subjected to a pressure of 200 mmHg for 24 h. Therefore, we conclude that in the ectatic ducts of CP, PDH activates signalling pathways such as Notch, which have transforming potential.