Novel Gemini Surfactant for Binding Eu(III)-Polyoxometalate into Hydrogels and Polymer Latexes

The incorporation of rare-earth ions into polymer matrices can lead to useful materials in various fields such as biomarkers, lasers, luminescent devices, optical storage materials, and so on. Methods of incorporation are either extremely simple, such as mixing the polymer and the ion of interest in adequate solvents, or more sophisticated such as synthesizing predesigned monomers that contain the rare-earth ion or binding the ion on an already formed polymer chain. Cationic gemini surfactants represent a class of surfactants that can be used to incorporate metal-oxygen cluster compounds by means of strong electrostatic interactions. In this study, first, a novel cationic gemini surfactant having double bonds on both side chains was designed and prepared. After characterization, the surfactant was used to synthesize hydrogels with different degrees of crosslinking and also as a surfmer in emulsion polymerization of methyl methacrylate. The resulted polymer matrices were able to bind europium-polyoxometalate Na₉[EuW₁₀O₃₆]^.32H₂O. In case of luminescent lanthanide ions, changing the microenvironment around the metal ion also changes the intensity of some emission peaks as well as other luminescent parameters. Investigation of emission spectra of Eu³⁺ indicates a decrease in the symmetry of the microenvironment, when the polyanions pass from water to latex, to surfactant solution, and to hydrogel.

Kinetics of the Release of Nicotinamide Absorbed on Partially Neutralized Poly(acrylic-co-methacrylic acid) Xerogel under the Conditions of Simultaneous Microwave Heating and Cooling

The kinetics of release of nicotinamide (NIAM) that was absorbed on partially neutralized poly(acrylic-co-methacrylic) (PAM) xerogel/hydrogel, under the conditions of simultaneous microwave heating and cooling (SMHC) were examined. The kinetics curves of NIAM release into an aqueous solution at temperatures of 308-323 K were recorded. By applying the model-fitting method (MFM), it was found that the kinetics of NIAM release can be modeled by a kinetic model of a first-order chemical reaction. The values of the release rate constants (k_M) at different temperatures were calculated, and their values were found to be within the range 8.4 10^-3 s ^-1-15.7 10^-3 s^-1. It has been established that the Arrhenius equation was valid even in the conditions of SMHC. The values of the kinetic parameters (activation energy (Ea) and pre-exponential factor (A) of the NIAM release process adsorbed on PAM xerogel/hydrogel were calculated as follows: Ea = 25.6 kJ/mol and ln (A/s^-1) = 5.21. It has been proven that the higher value of the rate constant at SMHC in relation to CH is not a consequence of the overheating of the reaction system or the appearance of "hot-points". The values of change of the enthalpy of activation (ΔH*) and the change of entropy of activation (ΔS*) were calculated as follows: ΔH* = +23.82 kJ/mol and ΔS* = -201.4 J/mol K. The calculated higher values of the kinetic parameters and thermodynamic parameters of activation are explained by the formation of a specific activated complex under SMHC, whose structure and degree of order are different than in the one formed under CH.

Development and Evaluation of Superabsorbent Hydrogels Based on Natural Polymers

Superabsorbent hydrogels (SAHs) are three dimensional networks formed by polymers that can absorb aqueous solution of over 100% of their initial weight. This work aimed to develop and characterize SAHs of Chitosan/Xanthan gum (CG), Chitosan/Alginate (CA) and controlled Chitosan (C), Xanthan gum (G), and Alginate (A) produced using “onion-like” methodology. The swelling performance, the morphological structure, the crystallinity, and the Fourier transformed infrared spectroscopy characteristics of SAH were used for the characterization of polyelectrolytes complex. Swelling analysis showed that chitosan has a strong influence on the maintenance of hydrogels structure after swelling, mainly in the acid environment (pH = 2). The chitosan hydrogel presented around 3000% of acidic fluid absorption after 24 h. The chitosan:xanthan gum (1:1 and 2:1 named as C1G1 and C2G1, respectively) hydrogels were the best combination regarding swelling performance in an acid environment, reaching 1665% and 2024%, respectively, as well at pH 7.0, presenting 1005% (C1G1) and 667% (C2G1). Scanning electron microscopy analysis showed samples with pores, and with different shapes. The X-ray diffraction showed the presence of a characteristic peak at 2θ = 20° in all developed composition because of the crystalline nature of chitosan. This work shows the possibility of developing eco-friendly biopolymer-based SAHs at a low cost with a good swelling capacity and stability.

Hydrogels Obtained via γ-Irradiation Based on Poly(Acrylic Acid) and Its Copolymers with 2-Hydroxyethyl Methacrylate

Hydrogels containing both carboxyl and hydroxyl functional groups have been prepared by γ-irradiation of either aqueous solutions of acrylic acid (AA) and mixtures of AA and 2-hydroxyethyl methacrylate (HEMA) in different ratios, or aqueous solutions of poly(AA), PAA, and poly(AA-co-HEMA) obtained via solution polymerization. A higher absorbed dose is required in order to prepare hydrogels from monomer solutions, compared with those from polymer solutions. The range for the absorbed doses was chosen so that the probability of crosslinking reactions is higher than that of degradation ones. As the radiation energy deposited in a sample increases, the equilibrium swelling degree and the average molar mass between crosslinks diminishes. Chemical transformations induced by radiation were investigated by means of FTIR spectroscopy and thermal analysis of polymers before and after irradiation. For all these systems, the formation of a three-dimensional network enhances the glass transition temperature and thermal stability, but a further increase in the crosslinking degree may have the reverse effect on the glass transition temperature. Depending on the preparation protocol and/or hydrogel composition, superabsorbent materials that can bind different compounds throughout side functional groups may be obtained.

Strategies and First Advances in the Development of Prevascularized Bone Implants

Despite the great regenerative potential of human bone, large bone defects are a serious condition. Commonly, large defects are caused by trauma, bone disease, malignant tumor removal, and infection or medication-related osteonecrosis. Large defects necessitate clinical treatment in the form of autologous bone transplantation or implantation of biomaterials as well as the application of other available methods that enhance bone defect repair. The development and application of prevascularized bone implants are closely related to the development animal models and require dedicated methods in order to reliably predict possible clinical outcomes and the efficacy of implants. Cell sheet engineering, 3D-printing, arteriovenous loops, and naturally derived decellularized scaffolds and their respective testings in animal models are presented as alternative to the autologous bone graft in this article.