Green Fabrication of Heterostructured CoTiO3/TiO2 Nanocatalysts for Efficient Photocatalytic Degradation of Cinnamic Acid

In this work, CoTiO₃/TiO₂ (CTO/Ti) heterostructures were prepared by a hydrothermal procedure in a neutral medium using perovskite CoTiO₃ and tetraisopropyl titanate. Characteristics of the synthesized catalysts were analyzed by various techniques including X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, UV-vis diffuse reflectance spectroscopy, Brunauer-Emmett-Teller adsorption-desorption, energy-dispersive X-ray spectroscopy, field emission scanning electron microscopy, high-resolution transmission electron microscopy, and point of zero charges. The activity in the photodegradation of cinnamic acid (CA) under UV-A irradiation of the CTO/Ti heterostructure was investigated and compared with individual materials TiO₂ (Ti-w) and CoTiO₃ (CTO). The investigation showed that the heterostructured CoTiO₃/TiO₂ catalyst with optimal composition (5% CTO) exhibited much higher photocatalytic activity for degradation of cinnamic acid than individual CoTiO₃ and TiO₂. Under the optimal conditions (C _cat = 0.75 g/L, Q _air = 0.3 L/min, and pH = 3.8) the 90 min conversion of cinnamic acid reached 80.9% on 5CTO/Ti, much higher than those of CTO (4.6%) and Ti-w (75.2%). It was found that the enhancement in activity for the CA removal of the CTO/Ti heterostructure was due to the construction of a heterojunction structure between TiO₂(Ti-w) and CoTiO₃ that resulted in an increase in the specific surface area and porosity, reduction of the band gap energy, and higher efficient separation of charge carriers on the surface to prevent recombination. Alternatively, a comparison of the recyclability of 5CTO/Ti and Ti-w was made for CA degradation. The results showed a decrease in the CA conversion by 38% on 5CTO/Ti and 48% on Ti-w after six reaction cycles.

NMR spectroscopy of wastewater: A review, case study, and future potential

NMR spectroscopy is arguably the most powerful tool for the study of molecular structures and interactions, and is increasingly being applied to environmental research, such as the study of wastewater. With over 97% of the planet's water being saltwater, and two thirds of freshwater being frozen in the ice caps and glaciers, there is a significant need to maintain and reuse the remaining 1%, which is a precious resource, critical to the sustainability of most life on Earth. Sanitation and reutilization of wastewater is an important method of water conservation, especially in arid regions, making the understanding of wastewater itself, and of its treatment processes, a highly relevant area of environmental research. Here, the benefits, challenges and subtleties of using NMR spectroscopy for the analysis of wastewater are considered. First, the techniques available to overcome the specific challenges arising from the nature of wastewater (which is a complex and dilute matrix), including an examination of sample preparation and NMR techniques (such as solvent suppression), in both the solid and solution states, are discussed. Then, the arsenal of available NMR techniques for both structure elucidation (e.g., heteronuclear, multidimensional NMR, homonuclear scalar coupling-based experiments) and the study of intermolecular interactions (e.g., diffusion, nuclear Overhauser and saturation transfer-based techniques) in wastewater are examined. Examples of wastewater NMR studies from the literature are reviewed and potential areas for future research are identified. Organized by nucleus, this review includes the common heteronuclei (¹³C, ¹⁵N, ¹⁹F, ³¹P, ²⁹Si) as well as other environmentally relevant nuclei and metals such as ²⁷Al, ⁵¹V, ²⁰⁷Pb and ¹¹³Cd, among others. Further, the potential of additional NMR methods such as comprehensive multiphase NMR, NMR microscopy and hyphenated techniques (for example, LC-SPE-NMR-MS) for advancing the current understanding of wastewater are discussed. In addition, a case study that combines natural abundance (i.e. non-concentrated), targeted and non-targeted NMR to characterize wastewater, along with in vivo based NMR to understand its toxicity, is included. The study demonstrates that, when applied comprehensively, NMR can provide unique insights into not just the structure, but also potential impacts, of wastewater and wastewater treatment processes. Finally, low-field NMR, which holds considerable future potential for on-site wastewater monitoring, is briefly discussed. In summary, NMR spectroscopy is one of the most versatile tools in modern science, with abilities to study all phases (gases, liquids, gels and solids), chemical structures, interactions, interfaces, toxicity and much more. The authors hope this review will inspire more scientists to embrace NMR, given its huge potential for both wastewater analysis in particular and environmental research in general.

CuCr2O4@CaFe-LDO photocatalyst for remarkable removal of COD from high-strength olive mill wastewater

Wastewater from the olive mill constitutes a serious environmental concern, as it is characterized by a high inorganic and organic load. Here, a hybrid photocatalyst based on calcined Ca-Fe-LDH was successfully synthesized for the degradation of phenolic compounds and the removal of chemical oxygen demand (COD) from the high-strength olive mill wastewater (OMW). The catalyst (CuCr₂O₄@CaFe-LDO) displayed a stable ~4.48 µA cm^-2 photocurrent response, a 2.56 eV bandgap and a wide variety of pores with an average size of 12.51 nm. 1.0 g CuCr₂O₄@CaFe-LDO achieved 66% COD removal after 300 mins without an oxidant in the dark, while after 180 mins of reaction, CuCr₂O₄@CaFe-LDO/K₂S₂O₈/sunlight system resulted in ~99% and 98.3% COD and colour removal. Seven phenolic compounds were found in the crude OMW, with hydroxytyrosol (76.84%) and tyrosol (15.14%) being the main ones. The final pH of the sample treated increased from 4.3 to 7.3, which confirmed the degradation of phenolics and fatty acids in the OMW. OH, SO₄^-, h⁺ and O₂^- contributed notably to the degradation of polyphenols and the spent catalyst was easily and rapidly recovered from the bulk solution due to its saturation magnetization of 54.7 emu g^-1.

Polyphenolic Fraction from Olive Mill Wastewater: Scale-Up and in Vitro Studies for Ophthalmic Nutraceutical Applications

The valorization of food wastes is a challenging opportunity for a green, sustainable, and competitive development of industry. Approximately 30 million m³ of olive mill wastewater (OMWW) are produced annually in the world as a by-product of the olive oil extraction process. In addition to being a serious environmental and economic issue because of their polluting load, OMWW can also represent a precious resource of high-added-value molecules such as polyphenols that show acclaimed antioxidant and anti-inflammatory activities and can find useful applications in the pharmaceutical industry. In particular, the possibility to develop novel nutraceutical ophthalmic formulations containing free radical scavengers would represent an important therapeutic opportunity for all inflammatory diseases of the ocular surface. In this work, different adsorbents were tested to selectively recover a fraction that is rich in polyphenols from OMWW. Afterward, cytotoxicity and antioxidant/anti-inflammatory activities of polyphenolic fraction were evaluated through in vitro tests. Our results showed that the fraction (0.01%) had no toxic effects and was able to protect cells against oxidant and inflammatory stimulus, reducing reactive oxygen species and TNF-α levels. Finally, a novel stable ophthalmic hydrogel containing a polyphenolic fraction (0.01%) was formulated and the technical and economic feasibility of the process at a pre-industrial level was investigated.

Sugar and mineral enriched fraction from olive mill wastewater for promising cosmeceutical application: characterization, in vitro and in vivo studies

Nowadays, agro-food by-products represent a potential low-cost source of biologically active ingredients which have been paid significant attention as nutraceuticals, medicine, food and cosmetics. In a previous study we evaluated the total sugars, metals and polyphenols of olive mill wastewater (OMWW) from a Cerasuola olive cultivar. In the present work we selectively recovered a sugar and mineral enriched fraction (SMEF) from Cerasuola OMWW by a green adsorption/desorption process. The SMEF was mainly found to be composed of monosaccharides and potassium by HPLC-ELSD and ICP-MS. The in vitro cytotoxicity on human fibroblasts, at different concentrations of the fraction, was investigated by MTT and comet assays. In addition, intracellular reactive oxygen species (ROS) production, apoptosis and cell morphological changes were examined. The physical stability of a formulation containing the SMEF (1% w/w) and its in vivo skin effects were also assessed.Our results highlighted that the SMEF showed a toxic effect at higher concentrations (i.e. cell viability reduction, DNA fragmentation and morphological alterations) well correlated with high ROS levels. Conversely, at low concentrations (0.5% and 1% w/w), no significant changes were observed. For the first time, through stability studies and in vivo tests, we also demonstrated that the SMEF formulation is stable and safe for topical application, since skin hydration improvement without negative effects was observed after 7 days of its use. Therefore, the SMEF has great potential to be used for cosmeceutical applications.

Electrochemical destruction of trans-cinnamic acid by advanced oxidation processes: kinetics, mineralization, and degradation route

Acidic solutions of trans-cinnamic acid at pH 3.0 have been comparatively treated by anodic oxidation with electrogenerated H₂O₂ (AO-H₂O₂), electro-Fenton (EF), and photoelectro-Fenton (PEF). The electrolytic experiments were carried out with a boron-doped diamond (BDD)/air-diffusion cell. The substrate was very slowly abated by AO-H₂O₂ because of its low reaction rate with oxidizing ^•OH produced from water discharge at the BDD anode. In contrast, its removal was very rapid and at similar rate by EF and PEF due to the additional oxidation by ^•OH in the bulk, formed from Fenton's reaction between cathodically generated H₂O₂ and added Fe²⁺. The AO-H₂O₂ treatment yielded the lowest mineralization. The EF process led to persistent final products like Fe(III) complexes, which were quickly photolyzed upon UVA irradiation in PEF to give an almost total mineralization with 98 % total organic carbon removal. The effect of current density and substrate concentration on all the mineralization processes was examined. Gas chromatography-mass spectrometry (GC-MS) analysis of electrolyzed solutions allowed identifying five primary aromatics and one heteroaromatic molecule, whereas final carboxylic acids like fumaric, acetic, and oxalic were quantified by ion exclusion high-performance liquid chromatography (HPLC). From all the products detected, a degradation route for trans-cinnamic acid is proposed.

A mass transfer model for the fixed-bed adsorption of ferulic acid onto a polymeric resin: axial dispersion and intraparticle diffusion

In this study, amberlite XAD-16 (XAD-16) bed column system was used to remove ferulic acid (FA) from aqueous solutions. Laboratory-scale column experiments were conducted in downflow fixed bed at initial FA concentration of 1 g/L, initial pH 3, and 25°C. The performance of the adsorbent bed under different flow rates (1.3-7.7 mL/min) was studied. The bed utilization efficiency was in the range of 64.64-72.21% at the studied flow rates. A mass transfer model considering both axial dispersion and intraparticle diffusion was developed to predict the breakthrough curves of FA adsorption on XAD-16. This model predicted the experimental data better than Bohart-Adams model and Thomas model, based on the low deviation between predicted and experimental data. The axial dispersion coefficient value varied from 6.45 × 10(-6) to 1.10 × 10(-6) m(2)/s at flow rate from 1.3 to 7.7 mL/min, whereas the intraparticle diffusion coefficient was 1.04 × 10(-10) m(2)/s, being this last resistance the rate-limiting step. In conclusion, axial dispersion and intraparticle diffusion phenomena play the major role in predicting the adsorption of FA onto XAD-16 in fixed-bed columns.