Microwave Assisted Rapid and Green Synthesis of Silver Nanoparticles Using a Pigment Produced by Streptomyces coelicolor klmp33

Exploring the Potential of Halotolerant Actinomycetes from Rann of Kutch, India: A Study on the Synthesis, Characterization, and Biomedical Applications of Silver Nanoparticles

A tremendous increase in the green synthesis of metallic nanoparticles has been noticed in the last decades, which is due to their unique properties at the nano dimension. The present research work deals with synthesis mediated by the actinomycete Streptomyces tendae of silver nanoparticles (AgNPs), isolated from Little and Greater Rann of Kutch, India. The confirmation of the formation of AgNPs by the actinomycetes was carried out by using a UV-Vis spectrophotometer where an absorbance peak was obtained at 420 nm. The X-ray diffraction pattern demonstrated five characteristic diffraction peaks indexed at the lattice plane (111), (200), (231), (222), and (220). Fourier transform infrared showed typical bands at 531 to 1635, 2111, and 3328 cm-1. Scanning electron microscopy shows that the spherical-shaped AgNPs particles have diameters in the range of 40 to 90 nm. The particle size analysis displayed the mean particle size of AgNPs in aqueous medium, which was about 55 nm (±27 nm), bearing a negative charge on their surfaces. The potential of the S. tendae-mediated synthesized AgNPs was evaluated for their antimicrobial, anti-methicillin-resistant Staphylococcus aureus (MRSA), anti-biofilm, and anti-oxidant activity. The maximum inhibitory effect was observed against Pseudomonas aeruginosa at (8 µg/mL), followed by Escherichia coli and Aspergillus niger at (32 µg/mL), and against Candida albicans (64 µg/mL), whereas Bacillus subtilis (128 µg/mL) and Staphylococcus aureus (256 µg/mL) were much less sensitive to AgNPs. The biosynthesized AgNPs displayed activity against MRSA, and the free radical scavenging activity was observed with an increase in the dosage of AgNPs from 25 to 200 µg/mL. AgNPs in combination with ampicillin displayed inhibition of the development of biofilm in Pseudomonas aeruginosa and Streptococcus pneumoniae at 98% and 83%, respectively. AgNPs were also successfully coated on the surface of cotton to prepare antimicrobial surgical cotton, which demonstrated inhibitory action against Bacillus subtilis (15 mm) and Escherichia coli (12 mm). The present research integrates microbiology, nanotechnology, and biomedical science to formulate environmentally friendly antimicrobial materials using halotolerant actinomycetes, evolving green nanotechnology in the biomedical field. Moreover, this study broadens the understanding of halotolerant actinomycetes and their potential and opens possibilities for formulating new antimicrobial products and therapies.

Evaluation of AgNCs@PEI and their integrated hydrogel for colorimetric and fluorometric detection of ascorbic acid

A dual-mode colorimetric and fluorometric sensor based on water soluble silver nanoclusters (AgNCs@PEI) is developed for quantitative and visual detection of ascorbic acid (Asc A). The detection method relies on the Asc A induced aggregation of AgNCs@PEI, which resulted in fluorecsence quenching of the sensor. The clusters exhibited a unique combination of static and collisional quenching with a wide range of dynamic detection (1-105 µM) Linear relationship was observed in the concentration range 102-103 µM using fluorescence and 0.2 × 102-5 × 103 μM using absorbance spectroscopy with respective detection limits of 10.65 μM and 2.49 μM. The corresponding colorimetric and fluorometric changes can be easily monitored by the naked eye with a visual detection limit of 103 μM. AgNCs@PEI were further integrated within a hydrogel for developing a solid-state visual detection platform. Notably, the sensing response of the clusters towards Asc A remained unaltered even after hydrogel integration. Additionally, digital image analysis was adopted, which improved the sensitivity of instrument-free fluorescence detection of Asc A. Analysis by the developed sensor showed excellent recovery percentages of Asc A in spiked urine samples, which further underscores the practical applicability of the sensor.

Chitosan-based topical formulation integrated with green-synthesized silver nanoparticles utilizing Camellia sinensis leaf extracts: A promising approach for managing infected wounds

This study explores the eco-friendly biosynthesis of silver nanoparticles (AgNPs) utilizing Camellia sinensis leaf extract. We assess their antioxidant and antibacterial properties. Furthermore, we impregnated AgNPs into 2 % chitosan (CHS) gel and assessed their wound-healing potential in Escherichia coli and Staphylococcus aureus infected wounds. Optimized AgNPs demonstrated a mean particle size of 36.90 ± 1.22 nm and a PDI of 0.049 ± 0.001. Green-synthesized AgNPs exhibited enhanced free radical inhibition (IC50: 31.45 μg/mL, 34.01 μg/mL, 27.40 μg/mL) compared to leaf extract (IC50: 52.67 μg/mL, 59.64 μg/mL, 97.50 μg/mL) in DPPH, hydrogen peroxide, and nitric oxide free radical scavenging assays, respectively. The MIC/MBC values of AgNPs against E. coli and S. aureus were 5 ppm/ 7.5 ppm and 10 ppm/ 15 ppm, respectively. Furthermore, our study showed that green-synthesized AgNPs at MIC significantly reduced the biofilm production of E. coli (70.37 %) and S. aureus (67.40 %). The CHS/AgNPs gel exhibited potent wound healing activities, comparable to a commercial cream with the re-epithelialization period of 8.16 ± 0.75. Histological analysis demonstrated enhanced skin regeneration with a thicker epidermal layer, well-defined papillary dermal structure, and organized collagen fibers. In summary, these findings hold promise for addressing bacterial infections, particularly those associated with biofilms-related wound infections.

The Antioxidant Effect of the Metal and Metal-Oxide Nanoparticles

Inorganic nanoparticles, such as CeO₃, TiO₂ and Fe₃O₄ could be served as a platform for their excellent performance in antioxidant effect. They may offer the feasibility to be further developed for their smaller and controllable sizes, flexibility to be modified, relative low toxicity as well as ease of preparation. In this work, the recent progress of these nanoparticles were illustrated, and the antioxidant mechanism of the inorganic nanoparticles were introduced, which mainly included antioxidant enzyme-mimetic activity and antioxidant ROS/RNS scavenging activity. The antioxidant effects and the applications of several nanoparticles, such as CeO₃, Fe₃O₄, TiO₂ and Se, are summarized in this paper. The potential toxicity of these nanoparticles both in vitro and in vivo was well studied for the further applications. Future directions of how to utilize these inorganic nanoparticles to be further applied in some fields, such as medicine, cosmetic and functional food additives were also investigated in this paper.

Green synthesis of silver nanoparticles and its antibacterial activity using fungus Talaromyces purpureogenus isolated from Taxus baccata Linn

The present study is focused on the synthesis of silver nanoparticles (AgNPs) utilizing endophytic fungus Talaromyces purpureogenus, isolated from Taxus baccata Linn. Extracellular extract of Talaromyces purpureogenus has shown occurrence of secondary metabolites viz. terpenoids and phenols. Gas chromatography-mass spectroscopy analysis showed the presence of 16 compounds. Techniques like Ultraviolet–visible spectroscopy, Fourier transform infrared spectroscopy, dynamic light scattering, field emission gun scanning electron microscopy, high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction were employed to characterize the synthesized AgNPs. UV–Vis spectroscopy showed sharp peaks at 380–470 nm which indicates the presence of metallic silver. FTIR analysis showed the presence of various functional groups like phenols, hydroxyl groups, and primary amines. In DLS, Z-average size and PdI of synthesized AgNPs were 240.2 r.nm and 0.720 respectively, with zeta potential − 19.6 mV. In FEG-SEM and HRTEM the spherical AgNPs showed diameter in the range of 30–60 nm. In EDS analysis the weight percent of Ag is 67.26% and atomic percent is 43.13%. From XRD analysis the size of AgNPs was found to be 49.3 nm with face-centered cubic crystalline nature of fungal synthesized AgNPs. These nanoparticles have shown significant antibacterial activity against tested strains viz. Listeria monocytogenes (13 ± 0.29 mm), Escherichia coli (17 ± 0.14 mm), Shigella dysenteriae (18 ± 0.21 mm) and Salmonella typhi (14 ± 0.13 mm). These synthesized AgNPs have shown effective free radical scavenging activity against 2,2′-diphenyl-1-picrylhydrazyl. The present study showed that the endophytic fungus Talaromyces purpureogenus can be used as a prominent source to synthesize AgNPs by using biological, ecofriendly, and in a non-toxic way accompanied by antibacterial and antioxidant properties which further can reduce the harvesting pressure faced by Taxus baccata.

Graphical Abstract

Lichens-A Potential Source for Nanoparticles Fabrication: A Review on Nanoparticles Biosynthesis and Their Prospective Applications

Green synthesis of nanoparticles (NPs) is a safe, eco-friendly, and relatively inexpensive alternative to conventional routes of NPs production. These methods require natural resources such as cyanobacteria, algae, plants, fungi, lichens, and naturally extracted biomolecules such as pigments, vitamins, polysaccharides, proteins, and enzymes to reduce bulk materials (the target metal salts) into a nanoscale product. Synthesis of nanomaterials (NMs) using lichen extracts is a promising eco-friendly, simple, low-cost biological synthesis process. Lichens are groups of organisms including multiple types of fungi and algae that live in symbiosis. Until now, the fabrication of NPs using lichens has remained largely unexplored, although the role of lichens as natural factories for synthesizing NPs has been reported. Lichens have a potential reducible activity to fabricate different types of NMs, including metal and metal oxide NPs and bimetallic alloys and nanocomposites. These NPs exhibit promising catalytic and antidiabetic, antioxidant, and antimicrobial activities. To the best of our knowledge, this review provides, for the first time, an overview of the main published studies concerning the use of lichen for nanofabrication and the applications of these NMs in different sectors. Moreover, the possible mechanisms of biosynthesis are discussed, together with the various optimization factors influencing the biological synthesis and toxicity of NPs.

Nanoparticle-Based Devices in the Control of Antibiotic Resistant Bacteria

Antimicrobial resistance (AR) is one of the most important public health challenges worldwide as it represents a serious complication that is able to increase the mortality, morbidity, disability, hospital stay and economic burden related to infectious diseases. As such, the spread of AR–pathogens must be considered as an emergency, and interdisciplinary approaches must be undertaken in order to develop not only drugs, but holistic strategies to undermine the epidemic and pathogenic potentials of multi-drug resistant (MDR) pathogens. One of such approaches has focused on the use of antimicrobial nanoparticles (ANPs), as they have demonstrated to possess strong antimicrobial effects on MDR pathogens. On the other hand, the ability of bacteria to develop resistance to such agents is minimal. In this way, ANPs may seem a good choice for the development of new drugs, but there is no certainty about their safety, which may delay its translation to the clinical setting. As MDR pathogens are quickly becoming more prevalent and drug development is slow and expensive, there is an increasing need for the rapid development of new strategies to control such agents. We hereby explore the possibility of designing ANP-based devices such as surgical masks and fabrics, wound dressings, catheters, prostheses, dentifrices, water filters, and nanoparticle-coated metals to exploit the potential of such materials in the combat of MDR pathogens, with a good potential for translation into the clinical setting.

Synthesis and Application of Silver Nanoparticles (Ag NPs) for the Prevention of Infection in Healthcare Workers

Silver is easily available and is known to have microbicidal effect; moreover, it does not impose any adverse effects on the human body. The microbicidal effect is mainly due to silver ions, which have a wide antibacterial spectrum. Furthermore, the development of multidrug-resistant bacteria, as in the case of antibiotics, is less likely. Silver ions bind to halide ions, such as chloride, and precipitate; therefore, when used directly, their microbicidal activity is shortened. To overcome this issue, silver nanoparticles (Ag NPs) have been recently synthesized and frequently used as microbicidal agents that release silver ions from particle surface. Depending on the specific surface area of the nanoparticles, silver ions are released with high efficiency. In addition to their bactericidal activity, small Ag NPs (<10 nm in diameter) affect viruses although the microbicidal effect of silver mass is weak. Because of their characteristics, Ag NPs are useful countermeasures against infectious diseases, which constitute a major issue in the medical field. Thus, medical tools coated with Ag NPs are being developed. This review outlines the synthesis and utilization of Ag NPs in the medical field, focusing on environment-friendly synthesis and the suppression of infections in healthcare workers (HCWs).

Mycosynthesis, characterization, anticancer and antibacterial activity of silver nanoparticles from endophytic fungus Talaromyces purpureogenus

Background: Biogenic silver nanoparticles (AgNPs) have wider range of biomedical applications. The present work synthesized Tp-AgNPs using mycelial extract of endophytic fungus Talaromyces purpureogenus (MEEF), characterized, and analyzed for antibacterial, anti-proliferation and cell wounding healing activities.

Methods: The synthesized Tp-AgNPs were characterized by UV-visible spectrophotometer (UV-Vis), field emission transmission electron microscopy (FETEM) with energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), particle size analysis (PSA) and X-ray diffraction (XRD). Further, antibacterial activity was determined by Kirby–Bauer test and anti-proliferation activity was tested in human lung carcinoma A549 by water-soluble tetrazolium and flow cytometer assay. In addition, cell wounding healing activity was determined by scratch assay.

Results: UV-Vis results displayed a strong absorption peak from 390 nm to 420 nm, which indicated the successful synthesis of Tp-AgNPs. FETEM-EDS results indicated the round and triangle shaped Tp-AgNPs with the average size of 25 nm in accordance with PSA. FTIR analysis indicated the involvement of various functional molecules from MEEF in the synthesis of Tp-AgNPs. XRD result proved nature of Tp-AgNPs as a high-quality crystal. The Tp-AgNPs significantly inhibited the growth of bacterial pathogens at the minimal inhibitory concentration of 16.12 μg.mL⁻¹ for Gram⁺, and 13.98 μg.mL⁻¹ for Gram⁻ bacteria. Further, Tp-AgNPs (2 μg.mL⁻¹) showed a strong anti-proliferation effect in A549. Interestingly, Tp-AgNPs was not cytotoxic to normal NIH3T3 cells. In addition, the NPs exhibited a strong cell wounding healing activity.

Conclusion: This work biosynthesized AgNPs with strong antibacterial, anticancer and cell wound healing properties using endophytic fungus T. purpureogenus.

Synthesis and characterization of size- and shape-controlled silver nanoparticles

Silver nanoparticles (AgNPs) have application potential in diverse areas ranging from wound healing to catalysis and sensing. The possibility for optimizing the physical, chemical and optical properties for an application by tailoring the shape and size of silver nanoparticles has motived much research on methods for synthesis of size- and shape-controlled AgNPs. The shape and size of AgNPs are reported to vary depending on choice of the Ag precursor salt, reducing agent, stabilizing agent and on the synthesis technique used. This chapter provides a detailed review on various synthesis approaches that may be used for synthesis of AgNPs of desired size and shape. Silver nanoparticles may be synthesized using diverse routes, including, physical, chemical, photochemical, biological and microwave -based techniques. Synthesis of AgNPs of diverse shapes, such as, nanospheres, nanorods, nanobars, nanoprisms, decahedral nanoparticles and triangular bipyramids is also discussed for chemical-, photochemical- and microwave-based synthesis routes. The choice of chemicals used for reduction and stabilization of nanoparticles is found to influence their shape and size significantly. A discussion on the mechanism of synthesis of AgNPs through nucleation and growth processes is discussed for AgNPs of varying shape and sizes so as to provide an insight on the various synthesis routes. Techniques, such as, electron microscopy, spectroscopy, and crystallography that can be used for characterizing the AgNPs formed in terms of their shape, sizes, crystal structure and chemical composition are also discussed in this chapter.

Graphical Abstract:

Biosynthetic Conversion of Ag⁺ to highly Stable Ag⁰ Nanoparticles by Wild Type and Cell Wall Deficient Strains of Chlamydomonas reinhardtii

In the current study, two different strains of the green, freshwater microalga Chlamydomonas reinhardtii bioreduced Ag⁺ to silver nanoparticles (AgNPs), which have applications in biosensors, biomaterials, and therapeutic and diagnostic tools. The bioreduction takes place in cell cultures of C. reinhardtii at ambient temperature and atmospheric pressure, thus eliminating the need for specialized equipment, harmful reducing agents or the generation of toxic byproducts. In addition to the visual changes in the cell culture, the production of AgNPs was confirmed by the characteristic surface plasmon resonance (SPR) band in the range of 415–425 nm using UV-Vis spectrophotometry and further evolution of the SPR peaks were studied by comparing the peak intensity at maximum absorbance over time. X-ray diffraction (XRD) determined that the NPs were Ag⁰. Micrographs from transmission electron microscopy (TEM) revealed that 97 ± 2% AgNPs were <10 nm in diameter. Ag⁺ to AgNP conversion was determined by inductively coupled plasma atomic emission spectroscopy (ICP-AES). The AgNPs were stable over time in the cell culture media, acetone, NaCl and reagent alcohol solutions. This was verified by a negligible change in the features of the SPR band after t > 300 days of storage at 4 °C.

High conversion synthesis of <10 nm starch-stabilized silver nanoparticles using microwave technology

A microwave reaction to convert 99 ± 1% of Ag+ to silver nanoparticles (AgNPs) of size <10 nm within 4.5 min with a specific production rate and energy input of 5.75 mg AgNP L-1 min-1 and 5.45 W mL-1 reaction volume was developed. The glucose reduced and food grade starch stabilized particles remained colloidally stable with less than a 4% change in the surface plasmon resonance band at 425-430 nm at t > 300 days. TEM determined the size of AgNPs, while TEM-EDS and XRD verified elemental composition. The conversion was determined by inductively coupled plasma atomic emission spectroscopy (ICP-AES) and thermal gravimetric analysis (TGA). Additionally, the required silver to starch input mass ratio, 1.0:1.3, to produce colloidally stabilized AgNPs is significantly reduced compared to previous studies. The antibacterial activity of freshly prepared AgNPs and AgNPs aged >300 days was demonstrated against E. coli as determined by agar diffusion assays. This result, corroborated by spectrophotometric and TEM measurements, indicates long-term colloidal stability of the product. Thus, this study sustainably produced antibacterial AgNPs from minimal inputs. In the broader context, the current work has quantified a sustainable platform technology to produce sphere-like inorganic nanoparticles with antimicrobial properties.

Bioprocessing strategies for cost-effective large-scale biogenic synthesis of nano-MgO from endophytic Streptomyces coelicolor strain E72 as an anti-multidrug-resistant pathogens agent

In this report, the local nano-MgO synthesizer strain has been isolated from Ocimum sanctum plant and deposited in GenBank as endophytic Streptomyces coelicolor strain E72. Its intracellular metabolic fraction that contains 7.2 μg/μl of carbohydrate, 6.3 g/l of protein and 5.2 nmol/hr/ml of nitrate reductase used to produce multi-surface shaped nano-MgO with diameter ~25 nm. To the best of our knowledge, this is the first report using statistical nanobiotechnological strategies (Plackett -Burman, Box-Behnken and Taguchi experimental designs) to study and evaluate the endophytic S. coelicolor biomass production (123.3 g/l) and extract the highest bioactive metabolites that used for biogenic synthesis of nano-MgO (320 g/l) through exponential sucrose pulses feeding fermentation strategy after 192 hr in semi industrial scale bioreactor (7 L). Purified nano-MgO applied in vitro against multi-drug resistant human pathogens and the large inhibition zone recorded against Shigella flexneri (108 ± 10.53 mm). The average of MICs was recorded as 25 µg/ml that inhibited 90% of the pathogenic living cells and compared with 100 mg/ml ampicilin/sulbactam solution that killed 40% of the same pathogen. These results are expected to gather sufficient knowledge to discover and develop a new cheap and eco-friendly nano-MgO as an extremely strong antimicrobial agent used in biomedical applications.

Comparative antibacterial activity of silver nanoparticles synthesised by biological and chemical routes with pluronic F68 as a stabilising agent

The authors report the comparative antibacterial activity of silver nanoparticles synthesised by biological (using Fusarium oxysporum) and chemical routes in the presence and absence of pluronic F68 as a stabilising agent. The production of silver nanoparticles was evidenced by UV-visible spectra, with absorbance at about 420 nm in the case of both biological and chemical synthesis. X-ray diffraction pattern confirmed the presence of face-centred cubic structure (FCC plane). The nanoparticles characterised by transmission and scanning electron microscopy showed spherical silver nanoparticles with size range of 5-40 and 10-70 nm in the case of biologically and chemically synthesised nanoparticles, respectively. Addition of pluronic F68 showed the stabilisation of silver nanoparticles. Antibacterial efficacy of silver nanoparticles demonstrated different inhibitory activity against Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus. Overall, biologically synthesised silver nanoparticles showed higher activity as compared with chemically synthesised nanoparticles. Silver nanoparticles synthesised in the presence of pluronic F68 by the chemical route exhibited synergism in antibacterial activity as compared with those synthesised without pluronic F68. On the contrary, biogenic silver nanoparticles without pluronic F68 showed higher antibacterial potential.

Rapid Biosynthesis of Silver Nanoparticles Using Pepino (Solanum muricatum) Leaf Extract and Their Cytotoxicity on HeLa Cells

Within nanotechnology, gold and silver nanostructures have unique physical, chemical, and electronic properties [1,2], which make them suitable for a number of applications. Moreover, biosynthetic methods are considered to be a safer alternative to conventional physicochemical procedures for both the environmental and biomedical applications, due to their eco-friendly nature and the avoidance of toxic chemicals in the synthesis. For this reason, employing bio routes in the synthesis of functionalized silver nanoparticles (FAgNP) have gained importance recently in this field. In the present study, we report the rapid synthesis of FAgNP through the extract of pepino (Solanum muricatum) leaves and employing microwave oven irradiation. The core-shell globular morphology and characterization of the different shaped and sized FAgNP, with a core of 20-50 nm of diameter is established using the UV-Visible spectroscopy (UV-vis), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and Zeta potential and dynamic light scanning (DLS) studies. Moreover, cytotoxic studies employing HeLa (human cervix carcinoma) cells were undertaken to understand FAgNP interactions with cells. HeLa cells showed significant dose dependent antiproliferative activity in the presence of FAgNP at relatively low concentrations. The calculated IC₅₀ value was 37.5 µg/mL, similar to others obtained for FAgNPs against HeLa cells.

Ultrastructural changes in methicillin-resistant Staphylococcus aureus induced by positively charged silver nanoparticles

Silver nanoparticles offer a possible means of fighting antibacterial resistance. Most of their antibacterial properties are attributed to their silver ions. In the present work, we study the actions of positively charged silver nanoparticles against both methicillin-sensitive Staphylococcus aureus and methicillin-resistant Staphylococcus aureus. We use aberration-corrected transmission electron microscopy to examine the bactericidal effects of silver nanoparticles and the ultrastructural changes in bacteria that are induced by silver nanoparticles. The study revealed that our 1 nm average size silver nanoparticles induced thinning and permeabilization of the cell wall, destabilization of the peptidoglycan layer, and subsequent leakage of intracellular content, causing bacterial cell lysis. We hypothesize that positively charged silver nanoparticles bind to the negatively charged polyanionic backbones of teichoic acids and the related cell wall glycopolymers of bacteria as a first target, consequently stressing the structure and permeability of the cell wall. This hypothesis provides a major mechanism to explain the antibacterial effects of silver nanoparticles on Staphylococcus aureus. Future research should focus on defining the related molecular mechanisms and their importance to the antimicrobial activity of silver nanoparticles.