Study of the behavior of a bell-shaped colonic self-expandable NiTi stent under peristaltic movements. Biomed Res Int. 2013;2013:370582. [PMID: 23841067 PMCID: PMC3690217 DOI: 10.1155/2013/370582]

Mechanobiological considerations in colorectal stapling: Implications for technology development

Technological advancements in minimally invasive surgery have led to significant improvements in patient outcomes. One such technology is surgical stapling, which has evolved into a key component of many operating rooms by facilitating ease and efficacy in resection and repair of diseased or otherwise compromised tissue. Despite such advancements, adverse post-operative outcomes such as anastomotic leak remain a persistent problem in surgical stapling and its correlates (i.e., hand-sewing), most notably in low colorectal or coloanal procedures. Many factors may drive anastomotic leaks, including tissue perfusion, microbiome composition, and patient factors such as pre-existing disease. Surgical intervention induces complex acute and chronic changes to the mechanical environment of the tissue; however, roles of mechanical forces in post-operative healing remain poorly characterized. It is well known that cells sense and respond to their local mechanical environment and that dysfunction of this "mechanosensing" phenomenon contributes to a myriad of diseases. Mechanosensing has been investigated in wound healing contexts such as dermal incisional and excisional wounds and development of pressure ulcers; however, reports investigating roles of mechanical forces in adverse post-operative gastrointestinal wound healing are lacking. To understand this relationship well, it is critical to understand: 1) the intraoperative material responses of tissue to surgical intervention, and 2) the post-operative mechanobiological response of the tissue to surgically imposed forces. In this review, we summarize the state of the field in each of these contexts while highlighting areas of opportunity for discovery and innovation which can positively impact patient outcomes in minimally invasive surgery.

Biomechanical constitutive modeling of the gastrointestinal tissues: a systematic review

The gastrointestinal (GI) tract is a continuous channel through the body that consists of the esophagus, the stomach, the small intestine, the large intestine, and the rectum. Its primary functions are to move the intake of food for digestion before storing and ultimately expulsion of feces. The mechanical behavior of GI tissues thus plays a crucial role for GI function in health and disease. The mechanical properties are characterized by a biomechanical constitutive model, which is a mathematical representation of the relation between load and deformation in a tissue. Hence, validated biomechanical constitutive models are essential to characterize and simulate the mechanical behavior of the GI tract. Here, a systematic review of these constitutive models is provided. This review is limited to studies where a model of the strain energy function is proposed to characterize the stress-strain relation of a GI tissue. Several needs are identified for more advanced modeling including: 1) Microstructural models that provide actual structure-function relations; 2) Validation of coupled electro-mechanical models accounting for active muscle contractions; 3) Human data to develop and validate models. The findings from this review provide guidelines for using existing constitutive models as well as perspective and directions for future studies.

Design and evaluation of a novel anti-reflux biliary stent with cone spiral valve

Endoscopic placement of biliary stent is a well-established palliative treatment for biliary obstruction. However, duodenobiliary reflux after stent placement has been a common problem which may lead to dreadful complications. This paper designed a novel anti-reflux biliary stent with a cone spiral valve. Fluid-Structure Interaction (FSI) simulations were established to evaluate the efficiency of the anti-reflux stent comparing with a clinically applied standard stent. According to the stress distribution of the valve, the fatigue performance in the stress concentration area was analyzed. The results show that when the antegrade flow through the valve, the cone spiral valve could stretch and open to realize adequate drainage under the normal physiological pressure of biliary tract; When the duodenal reflux through the valve, the valve would be compressed and close with a result of nearly zero at the outlet flow rate. Furthermore, the anti-reflux stent achieved improved radial mechanical performance with 2.7 times higher radial stiffness than standard stent. Finite element analysis (FEA) also indicates that compared with the standard stent, the addition of the anti-reflux valve had little negative effect on flexibility of the stent. Fatigue analysis results showed that the valve was reliable. This research provides the new stent with a cone spiral valve and proves that it is technically feasible and effective for preventing the duodenobiliary reflux while ensuring the antegrade bile flow without compromising the other biomechanical performances.

Computational analysis of mechanical stress in colonic diverticulosis

Diverticulosis results from the development of pouch-like structures, called diverticula, over the colon. The etiology of the disease is poorly understood resulting in a lack of effective treatment approaches. It is well known that mechanical stress plays a major role in tissue remodeling, yet its role in diverticulosis has not been studied. Here, we used computational mechanics to investigate changes in stress distribution engendered over the colon tissue by the presence of a pouch-like structure. The objectives of the study were twofold: (1) observe how stress distribution changes around a single pouch and (2) evaluate how stress elevation correlates with the size of the pouch. Results showed that high stresses are concentrated around the neck of a pouch, and their values and propagation increase with the size of the pouch neck rather than the pouch surface area. These findings suggest that stress distribution may change in diverticulosis and a vicious cycle may occur where pouch size increases due to stress elevation, which in turn elevates stress further and so on. Significant luminal pressure reduction would be necessary to maintain stress at normal level according to our results and therapeutic approaches aimed directly at reducing stress should rather be sought after.

Feasibility of using bulk metallic glass for self-expandable stent applications

Self-expandable stents are widely used to restore blood flow in a diseased artery segment by keeping the artery open after angioplasty. Despite the prevalent use of conventional crystalline metallic alloys, for example, nitinol, to construct self-expandable stents, new biomaterials such as bulk metallic glasses (BMGs) are being actively pursued to improve stent performance. Here, we conducted a series of analyses including finite element analysis and molecular dynamics simulations to investigate the feasibility of using a prototypical Zr-based BMG for self-expandable stent applications. We model stent crimping of several designs for different percutaneous applications. Our results indicate that BMG-based stents with diamond-shaped crowns suffer from severe localization of plastic deformation and abrupt failure during crimping. As a possible solution, we further illustrate that such abrupt failure could be avoided in BMG-based stents without diamond shape crowns. This work would open a new horizon for a quest toward exploiting superior mechanical and functional properties of metallic glasses to design future stents. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1874-1882, 2017.

Colorectal stenting as first-line treatment in acute colonic obstruction

Tumoral obstructions in almost the entire gastrointestinal tract can be resolved with interventional digestive endoscopy techniques. Self-expanding metal stent (SEMS) insertion in the obstructed colon is a minimally invasive and relatively simple procedure providing an effective first-line treatment for relief of acute malignant obstruction symptoms and serving either as a preoperative or “bridge to surgery” procedure or as palliative definitive care. This technique was introduced in the early 1990s. Although there is still debate about its real value, a lot of reports have been published since then and the procedure is advocated by many surgical groups as the method of choice for the initial treatment of left-sided tumoral colonic obstruction. Before the procedure, colonic obstruction has to be diagnosed by abdominal radiographs, water contrast enema and/or a computed tomography scan. The greatest information is provided by the latter and it is perhaps the method of choice prior to stenting. Skills and training are mandatory, as in all interventional procedures. The key step for success is to cross the malignant stricture with a guidewire. Care must be taken not to over insufflate an obstructed colon during the procedure. SEMS slide over the guidewire through the endoscope working channel or in parallel, outside the endoscope. An average 7% perforation rate has been reported during the procedure and other minor complications can appear in the follow up. However, as a whole, this technique seems to compare favorably with surgery.