Experimental Investigation of the Viscosity and Stability of Scleroglucan-Based Nanofluids for Enhanced Oil Recovery

Biopolymers emerge as promising candidates for enhanced oil recovery (EOR) applications due to their molecular structures, which exhibit better stability than polyacrylamides under harsh conditions. Nonetheless, biopolymers are susceptible to oxidation and biological degradation. Biopolymers reinforced with nanoparticles could be a potential solution to the issue. The nanofluids' stability and performance depend on the nanoparticles' properties and the preparation method. The primary objective of this study was to evaluate the effect of the preparation method and the nanoparticle type (SiO2, Al2O3, and TiO2) on the viscosity and stability of the scleroglucan (SG). The thickening effect of the SG solution was improved by adding all NPs due to the formation of three-dimensional structures between the NPs and the SG chains. The stability test showed that the SG + Al2O3 and SG + TiO2 nanofluids are highly unstable, but the SG + SiO2 nanofluids are highly stable (regardless of the preparation method). According to the ANOVA results, the preparation method and standing time influence the nanofluid viscosity with a statistical significance of 95%. On the contrary, the heating temperature and NP type are insignificant. Finally, the nanofluid with the best performance was 1000 ppm of SG + 100 ppm of SiO2_120 NPs prepared by method II.

Nanotechnology Impact on Chemical-Enhanced Oil Recovery: A Review and Bibliometric Analysis of Recent Developments

Oil and gas are only two industries that could change because of nanotechnology, a rapidly growing field. The chemical-enhanced oil recovery (CEOR) method uses chemicals to accelerate oil flow from reservoirs. New and enhanced CEOR compounds that are more efficient and eco-friendly can be created using nanotechnology. One of the main research areas is creating novel nanomaterials that can transfer EOR chemicals to the reservoir more effectively. It was creating nanoparticles that can be used to change the viscosity and surface tension of reservoir fluids and constructing nanoparticles that can be utilized to improve the efficiency of the EOR compounds that are already in use. The assessment also identifies some difficulties that must be overcome before nanotechnology-based EOR can become widely used in industry. These difficulties include the requirement for creating mass-producible, cost-effective nanomaterials. There is a need to create strategies for supplying nanomaterials to the reservoir without endangering the formation of the reservoir. The requirement is to evaluate the environmental effects of CEOR compounds based on nanotechnology. The advantages of nanotechnology-based EOR are substantial despite the difficulties. Nanotechnology could make oil production more effective, profitable, and less environmentally harmful. An extensive overview of the most current advancements in nanotechnology-based EOR is provided in this paper. It is a useful resource for researchers and business people interested in this area. This review's analysis of current advancements in nanotechnology-based EOR shows that this area is attracting more and more attention. There have been a lot more publications on this subject in recent years, and a lot of research is being done on many facets of nanotechnology-based EOR. The scientometric investigation discovered serious inadequacies in earlier studies on adopting EOR and its potential benefits for a sustainable future. Research partnerships, joint ventures, and cutting-edge technology that consider assessing current changes and advances in oil output can all benefit from the results of our scientometric analysis.

Multiple Hydrogen Bonding-Assisted High-Strength Hydrogel of Silica/Polyacrylamide Nanocomposite Cross-Linked with Polyethylenimine

The nanocomposite gel system has been successfully applied as a water shutoff agent to enhance oil recovery (EOR) or for plugging to control lost circulation events. In this study, the silica/polyacrylamide nanocomposite was synthesized via in situ free radical polymerization of acrylamide (AM) monomers in the presence of silica nanoparticles. The composite was cross-linked with polyethylenimine to prepare a high-strength hydrogel. The viscosity test was conducted to determine the gelation time of the gel. Rheological measurements and sand pack breakthrough pressure tests were carried out to measure the gel strength. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) and scanning electron microscopy (SEM) tests were adopted to characterize the structure and morphology of the gel. The results show that compared to polyacrylamide (PAM) gel, the gelation time of the nanocomposite gel will decrease with increasing gel elasticity modulus, and the breakthrough pressure of the nanocomposite gel is 29.82 MPa, which increased by 65%. As shown in the ATR-FTIR test, this can be attributed to the presence of multiple hydrogen bonds for the PAM molecule with both silica and quartz sand particles. In the composite gel, hydrogen bonding mainly forms between the O atoms of PAM and the H atom on the surface of silica, enhancing gel strength and elasticity modulus with more cross-linking density and less porosity. Moreover, H bonding between additional -NH2 of PAM and quartz sand particles helps improve gel plugging pressure. However, in the silica and PAM mixture gel, the H bonding of silica occupies -NH2 of PAM, which became unavailable to attach on the sand surface, reducing the breakthrough pressure by 30%, although it can enhance the rheological strength. This study suggests that in situ composite of silica in PAM can not only greatly improve gel rheological strength but also help maintain the strong adhesion of PAM molecules onto quartz sand, resulting in better plugging performance in the sand reservoir.

A review on application of nanoparticles for EOR purposes: history and current challenges

Applications of nanotechnology in several fields of petroleum industry, e.g., refinery, drilling and enhanced oil recovery (EOR), have attracted a lot of attention, recently. This research investigates the applications of nanoparticles in EOR process. The potential of various nanoparticles, in hybrid and bare forms for altering the state of wettability, reducing the interfacial tension (IFT), changing the viscosity and activation of other EOR mechanisms are studied based on recent findings. Focusing on EOR, hybrid applications of nanoparticles with surfactants, polymers, low-salinity phases and foams are discussed and their synergistic effects are evaluated. Also, activated EOR mechanisms are defined and specified. Since the stabilization of nanofluids in harsh conditions of reservoir is vital for EOR applications, different methods for stabilizing nanofluids through EOR procedures are reviewed. Besides, a discussion on different functional groups of NPs is represented. Later, an economic model for evaluation of EOR process is examined and "Hotelling" method as an appropriate model for investigation of economic aspects of EOR process is introduced in detail. The findings of this study can lead to better understanding of fundamental basis about efficiency of nanoparticles in EOR process, activated EOR mechanisms during application of nanoparticles, selection of appropriate nanoparticles, the methods of stabilizing and economic evaluation for EOR process with respect to costs and outcomes.

Synthesis and Performance of Hybrid Hydrogels Loaded with Methylene Blue and Its Use for Antimicrobial Photodynamic Inactivation

Development and characterization of hybrid hydrogels loaded with methylene blue, which are designed to apply for photodynamic therapy, are presented. Hybrid hydrogels were synthesized by grafting polyacrylamide onto dextran/dextran sulfate sodium salt using N, N′-methylene-bis-acrylamide as a cross-linker. The differences in microstructure of synthesized hydrogels were proved by scanning electron microscopy. FTIR spectra testify that the chemical nature of hydrogel components affects the hydrogel hydrophilicity. The swelling properties of hydrogels in water and absorption/desorption hydrogels’ ability towards methylene blue were studied. It was shown that dye sorption was dependent on the hydrogel type. The hydrogel based on dextran and polyacrylamide revealed the highest ability to release absorbed dye. The bactericidal effect of this hydrogel loaded with methylene blue and activated by red light in suspension and solid medium of S. aureus was tested. The increase of bactericidal activity of hybrid hydrogel was dependent on radiation doses.

Nanotechnology in Enhanced Oil Recovery

Nanoparticles (NPs) are known as important nanomaterials for a broad range of commercial and research applications owing to their physical characteristics and properties. Currently, the demand for NPs for use in enhanced oil recovery (EOR) is very high. The use of NPs can drastically benefit EOR by changing the wettability of the rock, improving the mobility of the oil drop and decreasing the interfacial tension (IFT) between oil/water. This paper focuses on a review of the application of NPs in the flooding process, the effect of NPs on wettability and the IFT. The study also presents a review of several investigations about the most common NPs, their physical and mechanical properties and benefits in EOR.

Synthesis of an Acrylamide Copolymer Containing Nano-SiO2 by Ex Situ Cu(0)-Mediated SET-LRP

We report herein the synthesis of a novel star-shaped copolymer containing nano-SiO2 by single-electron transfer living radical polymerization (SET-LRP) in aqueous solution. The effects of polymerization conditions, such as the total amounts and molar ratios of the monomer, initiator, catalyst, ligand, and modified nano-SiO2, have been investigated through a series of experiments. The prepared acrylamide copolymers have been characterized by FTIR spectroscopy and 1H NMR spectrometry. The properties of the copolymers have been assessed by viscometry and rheometry. The results confirmed that the nano-SiO2 functional monomer was successfully combined in the SET-LRP. The optimum polymerization conditions were established through orthogonal experiments as a ratio of [AM] : [DMAEMA] : [I] : [CuBr] : [Me6TREN] of 674.4 : 35.5 : 1 : 1 : 2 at a total concentration of [AM] + [DMAEMA] of 2.5 mol/L. The appropriate concentration of the nano-SiO2 functional monomer (NSFM) was 0.5 wt% with respect to AM + DMAEMA. The rheology of the star-shaped copolymer exhibited a shear-thickening property when the shear rate exceeded a critical value (100 s−1). The AM/DMAEMA/NSFM copolymer displayed a higher viscosity than AM/DMAEMA at the same concentration. It was found that AM/DMAEMA/NSFM exhibited better salt and temperature tolerances.

Plenty of Room at the Bottom: Nanotechnology as Solution to an Old Issue in Enhanced Oil Recovery

During the past half-century, the prefix “nano” attached to several words, such as “technology”, “motors”, “device”, and so on has denoted cutting-edge research fields and topics at the forefront of classical scientific disciplines. Possible application fields have been frequently evoked, even if real-life examples are still difficult to find. The present review analyzes how nanotechnology is utilized in enhanced oil recovery (EOR) processes so as to increase the efficiency of mature oilfields. Nanotechnology in EOR is classified into three categories: nanoparticles/nanofluids, nanoemulsions, and nanocatalysts. The advantages at the nanoscale are also described and discussed, including an overview of manufacturing methods as well as the concerns about their possible environmental impacts. Clearly, nanotechnology has the potential to boost EOR techniques, although there are still many questions and drawbacks to be tackled.