Internet-of-things-integrated molecularly imprinted polymer-based electrochemical nano-sensors for pesticide detection in the environment and food products

To ensure environmental and health safety, relevant pollutants such as pesticides must be screened thoroughly to set their permissible limit. Various approaches have been used to identify pesticides such as capillary electrophoresis, gas and liquid-liquid chromatography, high-performance liquid chromatography, and enzyme-linked immune-absorbent tests. However, these techniques have some drawbacks, including time-consuming difficult steps, expensive bulky equipment, expert personnel, and a lack of selectivity. Recent advances in the field of biosensing have introduced biosensors for the onsite detection of pesticides which offer several advantages including rapid, simple, selective, sensitive, low-cost operation, and on-site detection. With the advent of molecularly imprinted polymer which substituted the traditional biorecognition elements (BREs) such as enzymes and antibodies, biosensors' sensitivity, selectivity, and reproducibility enhanced many folds. Molecularly imprinted polymers (MIP) are artificial polymer molecules that resemble natural BREs. They are synthesized when functional monomers are polymerized in the presence of a target analyte. Owing to the advantages of MIP, in this paper, the development of MIP-based electrochemical biosensors for pesticide detection is reviewed critically. A brief introduction to pesticides and the use of MIPs-based electrochemical sensors for pesticide detection is presented along with pros and cons. Further, Internet of Things (IoT) integrated MIP-based nanosensors for pesticide detection and information distribution have been discussed. In the end, future perspectives and challenges while implementing MIP-based nanosensors for onsite pesticide recognition have eventually been highlighted.

Preparation of poly (methacrylic acid)/graphene oxide aerogel as solid-phase extraction adsorbent for extraction and determination of dopamine and tyrosine in urine of patients with depression

Dopamine (DA) and l-tyrosine (l-Tyr) are neurotransmitters involved in various neuropsychiatric disorders. Therefore, it is important to monitor their levels for diagnosis and treatment. In this study, we synthesized poly (methacrylic acid)/graphene oxide aerogels (p(MAA)/GOA) by in situ polymerization and freeze-drying using graphene oxide and methacrylic acid as substrates. Then, the p(MAA)/GOA were applied as solid-phase extraction adsorbents to extract DA and l-Tyr from urine samples, followed by quantification using high performance liquid chromatography (HPLC). The p(MAA)/GOA showed better adsorption performance for DA and l-Tyr than commercial adsorbents, likely as a result of the strong adsorption of the target analytes via π-π and hydrogen bonding interactions. Further, the developed method had good linearity (r > 0.9990) at concentrations of DA and l-Tyr of 0.075-2.0 and 0.75-20.0 μg mL^-1, respectively, as well as a limit of detection of 0.018-0.048 μg mL^-1, limit of quantitation of 0.059-0.161 μg mL^-1, spiked recovery of 91.1-104.0%, and interday precision of 3.58-7.30%.The method was successfully applied to determine DA and l-Tyr in the urine samples of patients suffering from depression, demonstrating its potential for clinical applications.

Solid-Phase Extraction of Active Compounds from Natural Products by Molecularly Imprinted Polymers: Synthesis and Extraction Parameters

Molecularly imprinted polymers (MIPs) are synthetic polymers with a predetermined selectivity for a particular analyte or group of structurally related compounds, making them ideal materials for separation processes. Hence, in sample preparation, MIPs are chosen as an excellent material to provide selectivity. Moreover, its use in solid-phase extraction, also referred to as molecular imprinted solid phase extraction (MISPE), is well regarded. In recent years, many papers have been published addressing the utilization of MIPs or MISPE as sorbents in natural product applications, such as synthesis. This review describes the synthesis and characterization of MIPs as a tool in natural product applications.

Occurrence and characterization of microplastic and mesoplastic pollution in the Migliarino San Rossore, Massaciuccoli Nature Park (Italy)

Microplastics pollution is progressively threatening natural parks across the world. In the framework of monitoring this concerning trend, the present study focuses on the occurrence and identification of mesoplastics (MEPs) and microplastics (MPs) in sand samples collected before and after the summer season from the beach of the Nature Park of Migliarino San Rossore Massaciuccoli (Pisa, Italy). Meso- and microplastics were identified using Fourier transform infrared spectroscopy 2D Imaging, and detected in all samples with average concentrations of 207 ± 30 MPs/kg d.w., and 100 ± 44 MEPs/kg d.w., respectively. Seasonal changes of flow of the Arno River, industrial activities, and urban footprint were considered as the major sources of plastic pollution. Our results showed the occurrence of both natural and synthetic polymers including cellulose, polyethylene, polypropylene, polyamides, polyethylene terephthalate, and acrylonitrile.

Development of a sensitive method for the analysis of four phthalates in tea samples: Tea bag contribution to the total amount in tea infusion

A sensitive, precise and selective method for the analysis of butyl benzyl phthalate (BBP), diethyl phthalate (DEP), dibutyl phthalate (DBP), and dimethyl phthalate (DMP) in tea samples has been applied. Molecularly Imprinted Polymer-Solid Phase Extraction (MIP-SPE) has been used for the separation and preconcentration of these compounds. Phthalates extracted by SPE were analysed by high-performance liquid chromatography-electrospray ionisation-mass spectrometry (HPLC-ESI-MS). The method was sensitive (LOD < 2 µg L^-1), precise (RSD <10%) and accurate with recovery percentages ranging from 84% to 97%. Finally, the developed method was applied for the analysis of these phthalates in several tea samples marketed in bags. Migration studies were also performed to evaluate the concentration of phthalates released from the bags into the infusions, and teabag filters were analysed by Fourier-transform infrared spectroscopy. The migration study shows that tea filter bags contribute to the total phthalates concentration in tea infusion, and this contribution varies between 1.8 to 93.5 % of the total phthalates' concentrations. Tea filter bags release higher DBP than BBP, DMP, and DEP.

Evaluation of porogen factors for the preparation of ion imprinted polymer monoliths used in mercury removal

In the present study, ion imprinted polymer monoliths (IIPMs) were developed to overcome the limitations of ion imprinted polymer particles (IIPPs) used for the removal of Hg(II) ions from waste water samples. The adsorbents preparation, characterization and Hg(II) removal were very well reported. The IIPMs on porogen optimization was prepared using the molding technique with Hg(II) as a template ion, [2-(methacryloyloxy)ethyl]trimethylammonium cysteine (MAETC) as ligand, methacrylic acid (MAA) as functional monomer, ethylene glycol dimethacrylamide (EGDMA) as cross-linker, benzoyl peroxide as an initiator and methanol and acetonitrile as porogen in the polypropylene tube (drinking straw) as mold. The IIPMs prepared with higher volumes of porogen were indicated to have a good adsorption rate for the Hg(II) removal along with good water permeability and larger porosity as compared to a lower volume of porogen. The IIPMs prepared using the binary porogen were able to improve the porosity and surface area of the monolithic polymers as compared to the single porogen added IIPMs. Finally, we indicate from our analysis that the IIPM having the efficient capacity for the Hg(II) ions is easy to prepare, and has higher water permeability along with high porosity and high adsorption capacity and all these factors making it one of the suitable adsorbent for the successful removal of Hg(II) ions.