A review on biodentine, a contemporary dentine replacement and repair material

A tricalcium phosphate (TCP) and hydroxyapatite (HA) based light-cured biomaterial for vital pulp therapy

OBJECTIVES

Evaluate a new light-cured material with better properties for vital pulp therapy.

METHODS

Light-cured resin materials consisted of polyethylene glycol (600) diacrylate mixed with different ratios of TCP to HA. In addition to the temperature change (n = 5 for each subgroup) were tested, cell viability and Alizarin Red Staining (ARS) assay were also tested in vitro on human dental pulp cells (n = 6 for each subgroup). Lastly, the material was then compared with Biodentine and control groups in the molars of Wistar rats in vivo for histology assessment.

RESULTS

The temperature change for the new materials were under 5 degrees Celsius. For the in vitro assessments, there was no significant difference on day 3 and day 7 for cell viability test. ARS assay showed significantly higher mineralized nodule formation when treated without induction medium for Group D and Biodentine on day 10 compared to Group C and control. On the contrary, Biodentine and control groups treated with induction medium showed significant higher mineralization than the new materials. Histology assessments demonstrated higher mineralized content in Group D and Biodentine on week 3 and week 6. The inflammatory cells in the dental pulp complex of the Biodentine group resolved on week 6 while the inflammation resolved in Group D on week 3.

SIGNIFICANCE

The new material exhibits low heat production, low cytotoxicity, and good calcium ion release capability. Compared to traditional materials, it has shorter setting time and better aesthetic outcomes, making it highly suitable for use in vital pulp therapy.

In vitro bacterial penetration and dissemination through dentinal tubules in roots filled with calcium silicate-based cements

The aim of this study was to assess whether calcium silicate root fillings prevent bacterial penetration and to determine how bacteria penetrate roots. Extracted single-rooted, single-canal human teeth were decoronated, prepared and filled with ProRootMTA or Biodentine (n = 12 each). Positive and negative (n = 2 each) controls were not filled. A two-chamber model was used with Streptococcus gordonii. The lower compartment was evaluated for turbidity over 150 days. Roots were split and examined for bacteria via SEM. The chi-squared test was used for comparisons (α = 0.05). Experimental groups had bacteria in their coronal thirds. Tubules contained bacteria in 90.9% and 91.7% of areas examined in the Biodentine and ProRootMTA groups, respectively, with no significant difference (p = 0.914). Experimental and negative roots had no turbidity with no significant difference between Biodentine and ProRootMTA (p = 1.000). Positive controls had turbidity. Bacteria penetrate roots via dentine tubules of root-filled teeth. Biodentine was comparable to ProRoot MTA.

Evaluation of Surface Topography and Biomimetic Remineralization Capacity of Dendrimers in Comparison With Calcium Silicate Cement: An In Vitro Study

INTRODUCTION

Biodentine, a calcium silicate-based material, is known for its biocompatibility and ability to promote dentin regeneration. With their unique branching structure, polyamidoamine (PAMAM) dendrimers have shown promise in facilitating biomimetic remineralization processes.

AIM

This study investigates the synergistic effects of combining PAMAM with Biodentine on root dentin remineralization, aiming to develop a novel bioactive compound that offers superior protective and regenerative properties.

METHODS

The following predictions were made: (1) In a cyclic artificial saliva/acid regimen, among the test groups, the combination of Biodentine and PAMAM would cause the most root dentin remineralization (2). Biodentine alone would increase Ca and P concentrations, neutralize acid, and promote root dentin remineralization (3). PAMAM, on the other hand, can remineralize the demineralized root dentin.

RESULTS

Minimal mineral regeneration was accomplished in demineralized root dentin when treated with Biodentine or PAMAM alone. Root dentin remineralization was most pronounced when Biodentine and PAMAM were used together, and the hardness of demineralized root dentin was raised to an equivalent level to that of healthy root dentin.

DISCUSSION

The study demonstrated the exceptional ability of PAMAM + Biodentine to promote root dentin remineralization. In an acid-challenging environment, PAMAM + Biodentine promoted full and efficient root dentin remineralization. Restorations made using innovative PAMAM + Biodentine technology show promise in remineralizing and protecting tooth structures.

Management of a Case of a Large Perforation Repair With Biodentine

Perforations, which are artificial contact connections among teeth and supporting tissues, have a substantial impact on the success of root canal therapy, whether caused by iatrogenic or pathological causes. This case report describes a 51-year-old female who had intermittent jaw pain that was diagnosed as perforation and was successfully controlled with endodontic intervention following a referral due to procedural problems. The perforation in the furcation zone of a molar was treated with biodentine, demonstrating its sealing, biocompatibility, and tissue restoration properties. The discussion emphasizes the necessity of choosing the right repair materials and techniques based on perforation size and location. Biodentine emerges as a viable option due to its capacity to form a dependable seal in demanding settings.  The study concluded by emphasizing the need for physician competence, tooth morphology understanding, and operative proficiency in preventing and properly treating perforations for the best treatment outcomes.

Challenges in differential diagnosis and treatment of cervical root resorption vs. root caries

External cervical root resorption may be occasionally mistaken for root caries and vice versa. Radiographical and clinical differential diagnoses of cervical root resorption and root caries are essential for correct treatment planning and a successful treatment outcome. This article reviews the contemporary literature and summarises the prevailing professional consensus pertaining to external cervical root resorption. Clinical diagnostics which help distinguish cervical root resorption from root caries are outlined and treatment approaches of external cervical root resorption are discussed.

Managing Cracked Teeth with Root Extension: A Prospective Preliminary Study Using Biodentine™ Material

Purpose

The authors of this study proposed an innovative approach involving the use of Biodentine™ material as an intraorifice barrier in cracked teeth with root extension to promote internal crack sealing, preventing the possibility of microinfiltration and apical crack propagation.

Materials and Methods

The dental records of 11 patients with 12 posterior cracked teeth with root extension were included with a precise protocol performed by a senior endodontist. The treatment protocol included pulp diagnosis, crack identification using a dental operating microscope (DOM), endodontic treatment, placing a Biodentine™ as an intraorifice barrier, and immediate full-coverage restoration. The effectiveness of the treatment was assessed at two intervals, 6 months, and 1-3 years posttreatment, evaluating clinical, radiographic, and tomographic aspects. The treatment was deemed successful if there were no indications of radiolucency, sinus tracts, edema, or periodontal pockets associated with the crack line.

Results

The study observed remarkably positive outcomes during the follow-up period, which spanned from 1 to 3 years. All the cracked teeth (100%) remained asymptomatic, meaning they were free of pain or discomfort. Furthermore, these teeth were in occlusal function. Both radiographic and tomographic assessments revealed the absence of bone loss along the crack line. This outcome signifies that the treatment effectively prevented further deterioration of the surrounding bone.

Conclusions

Integrating advanced biomaterials and conservative restorative techniques has paved the way for innovative approaches in dental care. This protocol suggests a proactive step for managing cracked teeth with root extension. It addresses both biological aspects by sealing internal cracks and mechanical aspects by preventing crack progression, thereby improving these teeth' prognosis and long-term survival.

"Biological responses of two calcium-silicate-based cements on a tissue-engineered 3D organotypic deciduous pulp analogue"

OBJECTIVES

The biological responses of MTA and Biodentine™ has been assessed on a three-dimensional, tissue-engineered organotypic deciduous pulp analogue.

METHODS

Human endothelial (HUVEC) and dental mesenchymal stem cells (SHED) at a ratio of 3:1, were incorporated into a collagen I/fibrin hydrogel; succeeding Biodentine™ and MTA cylindrical specimens were placed in direct contact with the pulp analogue 48 h later. Cell viability/proliferation and morphology were evaluated through live/dead staining, MTT assay and Scanning Electron Microscopy (SEM), and expression of angiogenic, odontogenic markers through real time PCR.

RESULTS

Viable cells dominated at day 3 after treatment presenting typical morphology, firmly attached within the hydrogel structures, as shown by live/dead staining and SEM images. MTT assay at day 1 presented a significant increase of cell proliferation in Biodentine™ group. Real-time PCR showed significant upregulation of odontogenic markers DSPP, BMP-2 (day 3,6), RUNX2, ALP (day 3) in contact with Biodentine™ compared to MTA and the control, whereas MTA promoted significant upregulation of DSPP, BMP-2, RUNX2, Osterix (day 3) and ALP (day 6) compared to the control. MSX1 presented downregulation in both experimental groups. Expression of angiogenic markers VEGFa and ANGPT-1 at day 3 was significantly upregulated in contact with Biodentine™ and MTA respectively, while the receptors VEGFR1, VEGFR2 and Tie-2, as well as PECAM-1 were downregulated.

SIGNIFICANCE

Both calcium silicate-based materials are biocompatible and exert positive angiogenic and odontogenic effects, although Biodentine™ during the first days of culture, seems to induce higher cell proliferation and provoke a more profound odontogenic and angiogenic response from SHED.

Antibacterial, biocompatible, and mineralization-inducing properties of calcium silicate-based cements

BACKGROUND

Different pulp capping materials have different origins and compositions, require different preparations, and may vary in their bioactive properties.

AIM

The purpose of this study was to evaluate the antibacterial activity, biocompatibility, and mineralization-inducing potential of calcium silicate-based pulp capping materials.

DESIGN

Six contemporary calcium silicate-based cements, ProRoot MTA, MTA Angelus, Biodentine, EndoSequence, NeoMTA 2, and NeoPutty, were evaluated. The antibacterial effects of these materials against Streptococcus mutans UA159 and Enterococcus faecalis ATCC 29212 were determined by the agar diffusion assay and the direct culture test. The biocompatibility and mineralization-inducing potential of these materials in preodontoblastic 17IIA11 cells were evaluated by the MTT assay and by Alizarin Red S staining, respectively.

RESULTS AND CONCLUSION

In agar diffusion test, only Biodentine showed distinct antibacterial effects against S. mutans. All the tested materials, however, showed antibacterial effects against S. mutans and E. faecalis in the direct culture test, with Biodentine showing the strongest growth inhibition against both S. mutans and E. faecalis. All the tested materials showed acceptable biocompatibility and mineralization-supporting potential in our experimental conditions. In summary, ProRoot MTA, MTA Angelus, Biodentine, EndoSequence, NeoMTA 2, and NeoPutty demonstrated acceptable in vitro antimicrobial, biocompatible, and mineralization-supporting properties.

Biodentine™ as a temporary filling in deep carious lesions in permanent teeth: a prospective observational 33-month follow-up study

PURPOSE

The study aimed to evaluate temporary fillings using Biodentine™ in asymptomatic deep carious lesions after 12, 24, and 36 months in school children from the remote village of Kerung, Nepal.

METHODS

From November 2018 to November 2019, 91 temporary fillings were placed using Biodentine™ (a hydraulic calcium silicate cement) in permanent molars with deep carious lesions of schoolchildren in the remote district of Kerung, Nepal. These restorations were performed after selective caries removal in a non-dental setting with hand instruments and cotton roll isolation, as electric motors and saliva ejection systems were unavailable. In total, 78 single-surface and 13 multi-surface fillings were placed. Clinical and radiographic follow-up periods encompassed 12, 21, and 33 months, respectively.

RESULTS

After 12 months, all single-surface fillings (100%) survived, whilst all multi-surface fillings were partially or entirely lost. The survival rate of single-surface restorations after 21 and 33 months was 67.6% and 50%, respectively. Radiographically, no pathology was observed.

CONCLUSION

This study showed that Biodentine could be used in deep carious lesions as a temporary filling in single-surface lesions for at least up to 1 year and in a substantial number of cases for up to 21 and 33 months.

Microsurgical management of radicular cyst using guided tissue regeneration technique: A case report

BACKGROUND

Radicular cyst is a lesion of odontogenic origin that arises from epithelial remains due to periapical periodontitis caused by inflammatory reactions generated at the apex of affected teeth with infected or necrotic pulps. The therapeutic management of radicular cysts is controversial. There is only one case report of enucleation of a radicular cyst managed with microsurgery and apicoectomy, but without the use of the guided tissue regeneration (GTR) technique in the same surgical procedure. The present clinical case describes the management of a radicular cyst with microsurgical approach, performance of an apicoectomy of the tooth associated with the entity, application of GTR technique, use of a resorbable membrane of type I bovine collagen, and bovine xenograft.

CASE SUMMARY

A 68-year-old patient presented with a radicular cyst from an upper lateral incisor. The microsurgical management used was aimed at enucleating the chemical membrane, performing apicoectomy of the tooth along with careful and precise retrograde filling, and implementing GTR technique using a resorbable collagen membrane and bovine xenograft. The diagnosis of radicular cyst was confirmed using histopathological analysis. The patient underwent follow-up evaluations at 10 and 30 d postoperatively. At 4 months postoperative evaluation, she remained asymptomatic, and radiographs showed significant periapical healing with adequate bone formation.

CONCLUSION

These results suggest that microsurgical management using the GTR technique with collagen membrane and xenograft, contributes to bone regeneration.

Histological evaluation of tissue reaction and new bone formation of different calcium silicate-based cements in rats

BACKGROUND

The purpose of this study was to evaluate the local reactions and new bone formation of rat subcutaneous and bone tissue to different calcium silicate cements.

METHODS

In this study, 80 rats were divided into five groups as control, BIOfactor MTA (BIO), NeoMTA Plus (NEO), MTA Repair Hp (REP), Biodentine (DENT) and then into two subgroups according to sacrification times (7, 30 days; n = 8). Polyethylene tubes filled with appropriate materials (test groups); empty tubes (control group) were implanted into the dorsum of each rat subcutaneously. For intraosseous implantation, materials were placed in the cavities created in tibia of rats. Subcutaneous tissue and tibia samples were stained with haematoxylin-eosin and subjected to histopathological analysis. A score (0-3) was used to grade inflammatory reaction and new bone formation. Data were analysed by Kruskal-Wallis and Mann-Whitney U tests (P < 0.05).

RESULTS

Inflammatory reaction observed in subcutaneous and intraosseous tissues for 7 days decreased significantly in all groups over time (P < 0.05). It was determined that there was significant increase in new bone formation in REP, BIO, DENT groups over time (P < 0.05).

CONCLUSION

Four contemporary bioceramic materials induced local inflammation and tissues changes shortly after subcutaneous implantation, which were reduced over time. In ıntraosseous implantation, all materials induced new bone formation over time.

REGISTRATION NUMBER

ADJ-03-23-0134. © 2023 Australian Dental Association.

Outcome of novel pulp capping modalities after full pulpotomy in teeth diagnosed with irreversible pulpitis: A prospective randomized clinical trial

Objective

The study aimed to compare and evaluate the effect of biodentine (BD) alone, BD along with Lyophilised freeze dried platelet rich concentrate (LPC + BD), and BD along with low-level laser therapy (BD + LLLT) after pulpotomy in mature permanent molars with irreversible pulpitis.

Materials and Methods

The study was designed as a randomized, pragmatic, parallel, double-blinded clinical trial registered under the Clinical Trial Registry-India (CTRI/2020/02/023245). 120 permanent molars fulfilling the inclusion and exclusion criteria with symptoms of irreversible pulpitis were randomized after performing pulpotomy into three pulp capping groups: Group 1, BD; Group 2, lyophilized freeze-dried platelet-rich concentrate + BD (LPC + BD); and Group 3, Low level laser therapy + BD Group 3, LLLT + BD. The intergroup comparison was done using one-way analysis of variance followed by the Bonferroni test. The level of significance and confidence interval were 5% and 95%, respectively. Interobserver reliability was measured using Cohen's kappa analysis.

Results

At 1 week, there was a significant difference (P < 0.005) observed in the mean postoperative pain levels between the three groups with Group 1 (BD) exhibiting the highest postoperative pain followed by Group 2 (LPC + BD) and least pain was exhibited by Group 3 (LLLT + BD). A similar pattern was observed regarding the analgesic intake with maximum frequency in Group 1 (BD) and least with Group 3 (LLLT + BD). No significant difference in success rates was reported among the groups.

Conclusion

Pulpotomy as a treatment option for mandibular molars with irreversible pulpitis has an acceptable clinical success rate; however, long-term overall success rate remains questionable. The outcomes of incorporating adjunctive modalities with BD are remarkable and show tremendous potential for continued development and research.

Modern methods and materials used to treat root perforation: effectiveness comparison

This study aims to experimentally compare the efficacy of different endodontic materials (iRoot BP Plus, Biodentine, MTA, Rootdent, and Trioxide) in the treatment of pulpitis and perforations on extracted tooth specimens. Additionally, the study aims to investigate the influence of iRoot BP Plus endodontic material on the regenerative processes following pulp amputation in laboratory animals. The secondary goal is to evaluate the effect of iRoot BP Plus on the restoration process in laboratory animals after pulp removal. The study presents a micropermeability analysis of the selected biomaterials performed on a sample of 50 single-rooted apical teeth in 2022. All teeth underwent endodontic treatment. Changes in molar morphology were investigated with eight laboratory animals (rabbits, 3 months old, all males) after simulated pulp removal and subsequent treatment with the iRoot BP Plus biomaterials. iRoot BP Plus appeared to be more effective in retrograde apical root filling than other biomaterials, as evidenced by its higher sealing effect. An experiment involving animal participants revealed the presence of protective adaptive mechanisms, which manifested in the form of an inflammatory process within 6 weeks after the dental pulp was removed. The connective tissue replaced the necrosis, and new capillaries began to form intensively. These dental outcomes suggest that iRoot BP Plus enables hermetical sealing in tooth restoration with good adhesion. Thus, it may have the ability to promote more active tissue regeneration after pulp removal.

The Combined Effects on Human Dental Pulp Stem Cells of Fast-Set or Premixed Hydraulic Calcium Silicate Cements and Secretome Regarding Biocompatibility and Osteogenic Differentiation

An important part of regenerative endodontic procedures involving immature permanent teeth is the regeneration of the pulp-dentin complex with continuous root development. Hydraulic calcium silicate cements (HCSCs) are introduced for the pulpal treatment of immature permanent teeth. The stem-cell-derived secretome recently has been applied for the treatment of various damaged tissues. Here, we evaluated the biocompatibility and osteogenic differentiation of HCSCs combined with secretome on human dental pulp stem cells. In the Cell Counting Kit-8 test and wound healing assays, significantly higher cell viability was observed with secretome application. In alkaline phosphatase analysis, the activity was significantly higher with secretome application in all groups, except for RetroMTA on day 2 and Endocem MTA Premixed on day 4. In an Alizarin Red S staining analysis, all groups with secretome application had significantly higher staining values. Quantitative real-time polymerase chain reaction results showed that the day 7 expression of OSX significantly increased with secretome application in all groups. SMAD1 and DSPP expression also increased significantly with secretome addition in all groups except for Biodentine. In conclusion, HCSCs showed favorable biocompatibility and osteogenic ability and are predicted to demonstrate greater synergy with the addition of secretome during regenerative endodontic procedures involving immature permanent teeth.

Bridging the Gap between Endodontic Failure and Success: A Case Report on Intentional Replantation

This case report describes a case of intention replantation in a 15-year-old patient with a mandibular permanent right second molar that had undergone root canal treatment previously. The tooth was tender on percussion. Radiographic evaluation showed the presence of a separated instrument and periapical radiolucency. The surgical procedure was performed under local anesthesia, and the tooth was extracted. After cleaning and disinfecting the root canal system, the tooth was reimplanted, and the socket was filled with a mixture of bone graft material and a growth factor. A stainless steel crown was then placed to protect the tooth. A follow-up examination was performed after 12 months. The clinical and radiographic examinations revealed a well-healing periapical lesion with no signs of infection. The patient was asymptomatic, and the tooth was functional. The results of this case indicate that intentional replantation can lead to a favorable outcome.

Effect of radiation therapy on fracture resistance of simulated immature teeth submitted to root reinforcement

BACKGROUND

The literature is scanty regarding the effect of radiation therapy (RT) on the mechanical properties of immature permanent teeth.

AIM

To evaluate the effect of RT on the fracture resistance of simulated immature teeth submitted to different types of root reinforcement.

DESIGN

Sixty-four human teeth simulating the Cvek stage 3 of root development were distributed into eight groups (n = 8), according to exposure or not to RT (70 Gy) and the root reinforcement method: Group NR (control)-no reinforcement/no RT; Group NR + RT (control)-no reinforcement/RT; Group PO-tricalcium silicate-based cement (TS) apical plug/canal obturation/no RT; Group PO + RT-TS apical plug/canal obturation/RT; Group TS-canal filling with TS/no RT; Group TS + RT-canal filling with TS/RT; Group FP-TS apical plug/fibreglass post/no RT; and Group FP + RT-TS apical plug/fibreglass post/RT. Fracture resistance was determined using a universal testing machine (0.5 mm/min).

RESULTS

In the intergroup comparison, nonirradiated teeth had higher fracture resistance (p < .05). Groups FP and FP + RT had higher fracture resistance (p < .001).

CONCLUSION

Radiotherapy affected the fracture resistance of simulated immature teeth. Reinforcement with fibreglass posts increased the fracture resistance, regardless of the radiation.

Clinical management of external cervical resorption: A systematic review

This review investigated whether any therapeutic options influenced the outcome of treatment for teeth with external cervical resorption. Out of 870 articles identified by an electronic search, 60 clinical case reports and six case series were included. No randomised clinical trials were found. Risk of bias was assessed using Joanna Briggs Institute's tools. External surgical intervention was the preferred method of accessing the lesions. Removal of resorptive tissue was most often achieved mechanically. Bioactive endodontic cements were the preferred materials for restoring teeth. The outcome measures were based on clinical and radiographic parameters. Of the cases included in the review, no specific treatment approach had a superior outcome in relation to Heithersay's classification. Furthermore, due to the absence of randomised clinical trials, and the low level of evidence associated with case reports/case series, it was not possible to define the optimum clinical treatment for external cervical resorption.

Advances and challenges in regenerative dentistry: A systematic review of calcium phosphate and silicate-based materials on human dental pulp stem cells

Conventional dentistry faces limitations in preserving tooth health due to the finite lifespan of restorative materials. Regenerative dentistry, utilizing stem cells and bioactive materials, offers a promising approach for regenerating dental tissues. Human dental pulp stem cells (hDPSCs) and bioactive materials like calcium phosphate (CaP) and silicate-based materials have shown potential for dental tissue regeneration. This systematic review aims to investigate the effects of CaP and silicate-based materials on hDPSCs through in vitro studies published since 2015. Following the PRISMA guidelines, a comprehensive search strategy was implemented in PubMed MedLine, Cochrane, and ScienceDirect databases. Eligibility criteria were established using the PICOS scheme. Data extraction and risk of bias (RoB) assessment were conducted, with the included studies assessed for bias using the Office of Health and Translation (OHAT) RoB tool. The research has been registered at OSF Registries. Ten in vitro studies met the eligibility criteria out of 1088 initial studies. Methodological heterogeneity and the use of self-synthesized biomaterials with limited generalizability were observed in the included study. The findings highlight the positive effect of CaP and silicate-based materials on hDPSCs viability, adhesion, migration, proliferation, and differentiation. While the overall RoB assessment indicated satisfactory credibility of the reviewed studies, the limited number of studies and methodological heterogeneity pose challenges for quantitative research. In conclusion, this systematic review provides valuable insights into the effects of CaP and silicate-based materials on hDPSCs. Further research is awaited to enhance our understanding and optimize regenerative dental treatments using bioactive materials and hDPSCs, which promise to improve patient outcomes.

A Spectrophotometric comparative evaluation of the sealing ability of various perforation repair materials with a novel eggshell modified GIC

Objectives

The objective of this study was to evaluate and compare the sealing ability of mineral trioxide aggregate (MTA), Biodentine, glass ionomer cement, and glass ionomer cement modified with Chicken Eggshell Powder when used as furcation perforation repair material.

Materials and Methods

In the present study, 80 human lower first molars were used. Collected teeth had no caries or restoration, and none had fused roots. Every molar had an endodontic access cavity made utilizing a high-speed, long-shank round bur for the initial entry and an Endo-Z for lateral extension and finishing the cavity walls. Each canal's orifice was covered with a temporary filling material. The pulpal floor and cavity walls of every molar were thoroughly coated with two successive coats of clear nail polish. A significant perforation was made between the orifices to the furcation area using a high-speed long shank round bur #4. The perforation centered between the mesial and distal orifice. They were divided into four experimental groups: Group I: 20 molars were repaired using MTA, Group II: 20 molars with Biodentine, Group III: 20 molars were repaired with glass ionomer cement, and Group IV was repaired using glass ionomer cement modified with 7% chicken eggshell powder. Moist cotton pellets were placed over the repair materials, and molars were kept in 100% humidity for 24 h to allow materials to set. Then, according to each group, molars were put in Petri dishes. Methylene blue dye was applied inside the access cavity of all samples for 24 h. Molars were placed under running tap water for 30 min to remove all residues of methylene blue, and then varnish was removed with a Parker blade #15 and polishing discs. Molars were placed in vials containing 1 mL of concentrated (65 wt%) nitric acid for 3 days. Vials were centrifuged at 14,000 rpm for 5 min. The supernatant from each sample was transferred in a quantity of 200 L to a 96-well plate. Sample absorbance was read by an automatic microplate spectrophotometer at 550 nm using concentrated nitric acid as a blank. Statistical analysis was performed using one-way analysis of variance. When the analysis of variance test was significant, the pairwise comparison of the means was done using a Duncan post hoc test. The significance level was set at P < 0.05. Statistical analysis was performed with SPSS 14.0 (SPSS Inc., Chicago, IL, USA) for Windows (Microsoft, Redmond, WA, USA).

Results

The highest dye absorbance was seen in Group III, followed by Groups IV, II, and I.

Conclusion

Within the limitations of study it was concluded that maximum sealing ability was seen in Biodentine followed by MTA, Glass Ionomer Cement modified with 7% Chicken Eggshell powder and Glass Ionomer Cement.

Growth Factors Released from Advanced Platelet-Rich Fibrin in the Presence of Calcium-Based Silicate Materials and Their Impact on the Viability and Migration of Stem Cells of Apical Papilla

Advanced platelet-rich fibrin (A-PRF) provides the scaffold and growth factors necessary for stem cells to proliferate and differentiate in successful regenerative endodontic procedures. This study investigates the release of transforming growth factor-β1 (TGF-β1), platelet-derived growth factor (PDGF), and vascular endothelial growth factor (VEGF) from A-PRF in cell culture media in the presence and absence of mineral trioxide aggregate (MTA) or Biodentine. Additionally, this research assesses the viability and migration of stem cells of the apical papilla (SCAP) in previously conditioned media. A-PRF obtained from 14 participants were incubated for 7 days in cell culture media alone or via layering with MTA or Biodentine discs and the release of selected growth factors in the media was evaluated using ELISA. The viability of SCAP grown in conditioned media was measured using the CCK8 assay, while SCAP migration was assessed via a transwell assay by counting migrated cells. The release of TGF-β1, PDGF, and VEGF was significantly higher in media with A-PRF alone than in the presence of either calcium-based silicate material (p < 0.05), which showed no difference from the no-A-PRF control (p < 0.05). None of the tested growth factors released in the A-PRF-conditioned media correlated with clot weight. A-PRF-conditioned media, both with and without calcium-based silicate materials, did not impact SCAP viability and migration (p > 0.05). This study shows that SCAP behavior is not impacted by the decrease in growth factor released in the presence of calcium-based silicate materials and that their role in REPs warrants further investigation.

Evaluation of removal efficiency of capping materials used in pulp revascularization in vitro

BACKGROUND

This study aimed to evaluate the removal efficiency of different capping materials used in pulp revascularization (PR) in a failure scenario.

METHODS

The apices of freshly extracted 30 maxillary incisors were cut to mimic the immature teeth; then, root canals were shaped up to #6 Peeso reamers. The regeneration steps of the American Association of Endodontists (AAE) were followed to simulate PR treatment in vitro. The canals were dressed with the Ciprofloxacin and Metronidazole medicament mixture for 2 weeks. Then capping material groups were created: BioDentine (BD), ProRootMTA (PMTA), and RetroMTA (RMTA) (n = 10). The sealed specimens were stored for 2 weeks at 37 ºC in phosphate-buffered saline then the samples were examined by micro-computed tomography (µ-CT) analysis. Set capping materials were retrieved using a specific cement removal kit by a single blind operator. The residue materials were examined again by µCT. Kruskal-Wallis and Mann-Whitney U tests sought the significance for residue volumes. One-way ANOVA and Tukey post hoc tests with the Bonferroni corrections sought significance for the duration (p = 0.05).

RESULTS

In the first examined µCT data, the mean (SD) capping material volumes of the PMTA, BD, and RMTA were 6.447 µm3 (1.086), 8.771 µm3 (0.491), and 8.114 µm3 (2.447), respectively. In the last examined µCT data, the median (IQR) residual volumes of the PMTA, BD, and RMTA were 0.051 µm3 (0.1), 0.313 µm3 (0.5), and 0.124 µm3 (0.1), respectively. A significant difference was found between BD and PMTA in the residual volumes (p < 0.05). The mean (SD) durations of the retrieving procedures of PMTA, BD, and RMTA were 19.83 min (2.34), 19.24 (3.60), and 22.04 (1.68), respectively (p = 0.063).

CONCLUSIONS

Within the limitations of the presented study, it was concluded that the capping materials were largely removed from the root canals using a non-invasive approach. Nevertheless, this duration of the retrieving could be described as long.

Effect of different chelating agents on the shear bond strength of calcium silicate-based cements to coronal dentin

We evaluated the shear bond strength (SBS) of mineral trioxide aggregate (MTA) and Biodentine (BD) to coronal dentin after treatment with ethylenediaminetetraacetic acid (EDTA), phytic acid (IP6), or etidronic acid (HEDP). Sodium hypochlorite-treated dentin surfaces were randomly divided into four groups according to conditioning protocol namely, 17% EDTA, 2.5% IP6, 9% HEDP, or distilled water (DS). Specimens were further divided according to the type of cement placed on conditioned dentin and SBS was tested. The results showed that DS/MTA and IP6/MTA groups had the highest values, and there was no significant difference between these two groups. IP6/BD group showed a lower SBS value compared to IP6/MTA; however, this did not reach the level of significance. The BS to dentin was influenced by the type of calcium silicate material and chelating agent. IP6 either improved or maintained the bonding while EDTA and HEDP showed a negative or no influence effect.

Comparative Evaluation of Fluoride Release and Compressive Strength of Biodentine Modified Using Sodium Fluorosilicate and Hydrofluoric Acid: An In-Vitro Study

Introduction Calcium trisilicate derivatives have widely been used as dentin and enamel substitutes recently. These cements have excellent biological properties, but they do not show fluoride release. The release of fluoride from dental materials is a very important property of a material in restorative applications as fluoride confers antibacterial and anti-cariogenic properties. This study thus attempts to incorporate fluoride in the form of sodium fluorosilicate and hydrofluoric acid into Biodentine to assess its fluoride-releasing properties. Methods Biodentine was modified by adding 7% sodium fluorosilicate in the powder and 10% hydrofluoric acid to the liquid. Fluoride release was measured using a sodium 2-(parasulfophenylazo)-1,8-dihydroxy-3,6-naphthalenedisulfonate (SPADNS) spectrophotometer after 1, 3, 7, 14, 21, and 28 days. The compressive strength of the modified material was measured using a universal testing machine. Results Fluoride release was found to be higher in the group that had both powder and liquid modified than in groups in which either of the components were modified. The difference was found to be statistically significant (p<0.001). Conclusion Incorporation of fluoride in Biodentine is feasible with acceptable release of fluoride without adversely affecting the compressive strength of the Biodentine.

Comparative Biocompatibility and Odonto-/Osteogenesis Effects of Hydraulic Calcium Silicate-Based Cements in Simulated Direct and Indirect Approaches for Regenerative Endodontic Treatments: A Systematic Review

BACKGROUND

Regenerative dentistry is the operation of restoring dental, oral and maxillofacial tissues. Currently, there are no guidelines for the ideal cement/material in regenerative endodontic treatments (RET). Hydraulic calcium silicate-based cements (hCSCs) are currently the material of choice for RET.

OBJECTIVES

This systematic review was conducted to gather all of the different direct and indirect approaches of using hCSCs in RET in vitro and in vivo, and to ascertain if there are any superiorities to indirect approaches.

METHODS AND MATERIALS

This systematic review was conducted according to the 2020 PRISMA guidelines. The study question according to the PICO format was as follows: Comparison of the biological behavior (O) of stem cells (P) exposed to hCSCs through direct and indirect methods (I) with untreated stem cells (C). An electronic search was executed in Scopus, Google Scholar, and PubMed.

RESULTS

A total of 78 studies were included. Studies were published between 2010 and 2022. Twenty-eight commercially available and eighteen modified hCSCs were used. Seven exposure methods (four direct and three indirect contacts) were assessed. ProRoot MTA and Biodentine were the most used hCSCs and had the most desirable results. hCSCs were either freshly mixed or set before application. Most studies allowed hCSCs to set in incubation for 24 h before application, which resulted in the most desirable biological outcomes. Freshly mixed hCSCs had the worst outcomes. Indirect methods had significantly better viability/proliferation and odonto-/osteogenesis outcomes.

CONCLUSION

Biodentine and ProRoot MTA used in indirect exposure methods result in desirable biological outcomes.

Successful outcome of permanent maxillary incisor reimplanted after 30 hours of extra-oral time-a case report with 5-year follow-up

Key Clinical Message

Tooth reimplantation should be attempted in every possible case with thorough disinfection and impervious obturation. Integration of progressive innovations with recommended protocols can enhance complication free survival in intense situations.

Abstract

The present case describes the unique successful outcome of a tooth reimplanted after the delay of 30 hours. A 21-year old male patient presented with an avulsed #21 after a fall due to electric shock. It was reimplanted according IADT guidelines with the addition of specific irrigation sequence proposed for regenerative endodontic procedures during the endodontic treatment. The final obturation was accomplished by combination of Biodentine and BioRCS root-canal sealer. Subluxated #11 developed symptoms at 6 months and was further managed using recommended endodontic procedure. Both teeth had complication free survival during 5 year follow-up.

Micro-CT analysis and leakage of bioceramic retrofillings after ultrasonic and Er:YAG laser cavity preparations: an in vitro study

The purpose of the study was to determine the influence of preparation techniques on marginal adaptation and sealing of Biodentine™ and TotalFill® RRM bioceramic retrograde fillings. Fifty-two single-root teeth extracted for periodontal reasons were used. Root canals were instrumented using Reciproc Blue #25 and obturated using a single cone technique with an AH Plus® root canal sealer. Retrograde cavities were prepared with Piezomed device (Piezo), Er:YAG laser in short-pulse(SP) and quantum square pulse(QSP) modes and filled with Biodentine™ (BD) or TotalFill® RRM (TF). There were 6 groups (n=8): (1) Piezo BD, (2) Piezo TF, (3) SP BD, (4) SP TF, (5) QSP BD, and (6) QSP TF, and positive and negative controls (n=2). Micro-CT analysis was performed on two samples from each group. Percentage volumes of internal and external voids in apical 1.5 mm were determined. Rhodamine B dye leakage was done on six samples. The samples were cut longitudinally and examined under a stereomicroscope. Digital recordings were analyzed in ImageJ software. The deepest penetration of color in mm was recorded. The data were statistically analyzed using ANOVA and Duncan's test at the level of significance α=0.05. TotalFill® RRM performed significantly better than Biodentine™ in terms of sealing (p<0.05) and marginal adaptation, as evaluated by micro-CT. Sealing was significantly better in SP compared to QSP mode preparations (p<0.05). Differences between Piezomed and laser modes were not significantly different (p>0.05). Sealing was statistically significantly better with TotalFill® RRM compared to Biodentine™ and in Er:YAG SP preparations compared to Er:YAG QSP.

The Effects of Tricalcium-Silicate-Nanoparticle-Containing Cement: In Vitro and In Vivo Studies

A tricalcium-silicate-nanoparticle-containing cement (Biodentine) was developed to overcome the disadvantages of existing mineral trioxide aggregate (MTA) dental materials. This study aimed at evaluating the effects of Biodentine on the osteogenic differentiation of human periodontal ligament fibroblasts (HPLFs) in vitro and the healing of furcal perforations created experimentally in rat molars in vivo, in comparison to MTA. The in vitro studies performed the following assays: pH measurement using a pH meter, the release of calcium ions using a calcium assay kit, cell attachment and morphology using SEM, cell proliferation using a coulter counter, marker expression using quantitative reverse transcription polymerase chain reaction (qRT-PCR) and cell mineralized deposit formation using Alizarin Red S (ARS) staining. In the in vivo studies, MTA and Biodentine were used to fill the rat molar perforations. Rat molars were processed at 7, 14 and 28 days for analysis of inflammatory processes using hematoxylin and eosin (HE) staining, immunohistochemical staining of Runx2 and tartrate-resistant acid phosphate (TRAP) staining. The results demonstrate that the nanoparticle size distribution of Biodentine is critical for osteogenic potential at an earlier stage compared to MTA. Further studies are required to elucidate the mechanism of action of Biodentine in osteogenic differentiation.

Ex Vivo Osteogenesis Induced by Calcium Silicate-Based Cement Extracts

Calcium silicate-based cements are used in a variety of clinical conditions affecting the pulp tissue, relying on their inductive effect on tissue mineralization. This work aimed to evaluate the biological response of calcium silicate-based cements with distinct properties-the fast-setting Biodentine™ and TotalFill^® BC RRM™ Fast Putty, and the classical slow-setting ProRoot^® MTA, in an ex vivo model of bone development. Briefly, eleven-day-old embryonic chick femurs were cultured for 10 days in organotypic conditions, being exposed to the set cements' eluates and, at the end of the culture period, evaluated for osteogenesis/bone formation by combining microtomographic analysis and histological histomorphometric assessment. ProRoot^® MTA and TotalFill^® extracts presented similar levels of calcium ions, although significantly lower than those released from Biodentine^TM. All extracts increased the osteogenesis/tissue mineralization, assayed by microtomographic (BV/TV) and histomorphometric (% of mineralized area; % of total collagen area, and % of mature collagen area) indexes, although displaying distinct dose-dependent patterns and quantitative values. The fast-setting cements displayed better performance than that of ProRoot^® MTA, with Biodentine^TM presenting the best performance, within the assayed experimental model.

Evaluation of Direct and Indirect Pulp Capping With Biodentine in Vital Permanent Teeth With Deep Caries Lesions

INTRODUCTION

Pulp capping is a procedural method of preserving pulp vitality following deep caries damage or accidental pulp exposure. Biodentine is a calcium silicate material that has been promoted for use in pulp capping among various clinical applications. This study evaluated the outcome of pulp capping with Biodentine following curettage of deep caries in the case series of permanent mature teeth.

MATERIALS AND METHODS

The study was carried out on 40 teeth with advanced caries treated by direct and indirect pulp capping using Biodentine, within a follow-up of six months. This was carried out at the Department of Conservative Dentistry-Endodontics of the CCTD Ibn Rochd-Casablanca.  Results: In this study, 43 teeth from 37 patients were treated with direct pulp capping and indirect pulp capping using Biodentine. The success rate of pulp capping was 90% at one month, 85% at three months, and 80% at six months.

CONCLUSION

The results of the studies conducted using Biodentine indicate that it is a suitable material for direct and indirect pulp capping, due to its bioactivity and ability to form a dentinal bridge.

Response of stem cells derived from human exfoliated deciduous teeth to Bio-C Repair and Mineral Trioxide Aggregate Repair HP: Cytotoxicity and gene expression assessment

Background

The aim of this study was to investigate and compare the cytotoxicity and gene expression of Bio-C Repair, Mineral Trioxide Aggregate (MTA) HP Repair, and Biodentine on stem cells derived from exfoliated deciduous teeth.

Materials and Methods

In this in vitro study MTT assay was used to assess the cellular viability at three different dilutions. The gene expression of Runt-related transcription factor 2 (Runx2), alkaline phosphatase (ALP), osteocalcin [OCN], and dentin matrix protein-1 (DMP-1) was measured with real-time polymerase chain reaction after 7 days, 14 days, and 21 days of incubation. One-way analysis of variance and Bonferroni posttest were used for statistical analysis (p=o.o5).

Results

After 72 h of incubation at dilution 1:4, stem cells derived from human exfoliated deciduous teeth (SHEDs) cultivated in Biodentine, followed by Bio-C Repair and MTA Repair HP reported with highest cellular viability. The highest mRNA expression of Runx2, ALP, OCN, and DMP-1 was reported in SHEDs cultured in Biodentine (after 21 days of incubation).

Conclusion

Bio-C Repair and MTA HP Repair are biocompatible and capable of odontogenic differentiation similar to Biodentine when cultured in stem cells derived from exfoliated primary teeth.

A comparative histological study of the effect of TheraCal LC and biodentine on direct pulp capping in rabbits: an experimental study

OBJECTIVES

This study histologically compared the effect of TheraCal LC and biodentine on direct pulp capping using a rabbit model.

MATERIALS AND METHODS

A direct pulp capping procedure was performed on 40 mandibular central incisors of 20 healthy, male New Zealand white rabbits. TheraCal LC and biodentine were applied to exposed pulp and 10 randomly selected rabbits were euthanized after the first and second week. Incisors were extracted and prepared for histological processing and examination to check the dentine bridge thickness, continuity, and extent of pulp inflammation. A blinded data analysis was performed, and groups were compared using a Wilcoxon signed-rank test while changes across time within each group were assessed using the Mann-Whitney U test.

RESULTS

When comparing the dentine bridge thickness, biodentine showed a significantly thicker dentine bridge in the first and second week (mean 28.16 µm, 33.66 µm), while TheraCal LC showed a dentine bridge in the second week only (mean 15.93 µm). Regarding dentine bridge continuity, biodentine showed a significantly better dentine bridge in the first week. Additionally, there was no difference in the second week. Furthermore, there was no statistically significant difference between each of the materials regarding the extent of inflammation.

CONCLUSIONS

Biodentine in vivo showed better results concerning thickness and continuity of the dentine bridge after direct pulp capping in rabbit incisors. Both biodentine and TheraCal LC had a similar inflammatory effect on the pulp.

CLINICAL RELEVANCE

Biodentine is more successful as a direct pulp capping material compared to TheraCal LC.

Biomimetic approaches and materials in restorative and regenerative dentistry: review article

Biomimetics is a branch of science that explores the technical beauty of nature. The concept of biomimetics has been brilliantly applied in famous applications such as the design of the Eiffel Tower that has been inspired from the trabecular structure of bone. In dentistry, the purpose of using biomimetic concepts and protocols is to conserve tooth structure and vitality, increase the longevity of restorative dental treatments, and eliminate future retreatment cycles. Biomimetic dental materials are inherently biocompatible with excellent physico-chemical properties. They have been successfully applied in different dental fields with the advantages of enhanced strength, sealing, regenerative and antibacterial abilities. Moreover, many biomimetic materials were proven to overcome significant limitations of earlier available generation counterpart. Therefore, this review aims to spot the light on some recent developments in the emerging field of biomimetics especially in restorative and regenerative dentistry. Different approaches of restoration, remineralisation and regeneration of teeth are also discussed in this review. In addition, various biomimetic dental restorative materials and tissue engineering materials are discussed.

Push out bond strength of hydraulic cements used at different thicknesses

BACKGROUND

The aim of this study was to compare the pushout bond strength (POBS) of three hydraulic cements, when used at thicknesses of 3 and 5 mm.

METHODS

78 root slices of 3 and 5 mm of thickness were obtained from human teeth. Cylindrical cavities of 1.4 mm of diameter were drilled and filled with Biodentine (BD), Totalfill Root Repair paste (TF) or ProRoot MTA White (PMTA). Pushout tests were performed 21 days later. The fracture pattern of each sample was also analyzed. POBS data were analyzed with Welch and Brown-Forsythe and Tamhane's post hoc tests and a Weibull analysis was also performed.

RESULTS

In the 3 mm group, TF showed significantly lower bond strength than BD and PMTA. In the 5 mm group, BD showed significantly higher bond strength than TF. Both BD and TF showed higher bond strength when the thickness of the sample increased, while PMTA did not.

CONCLUSIONS

TF and BD achieve higher pushout bond strength resistance when used at a thickness of 5 mm than at 3 mm, while the mean resistance of PMTA is less influenced by the thickness. At 5 mm of thickness, BD and PMTA exhibit similar resistance to displacement. However, the behavior of BD is more predictable than that of its predecessor. BD is a reliable hydraulic cement for clinical situations where thick cavities need to be filled and displacement resistance plays an important role. Clinicians need to consider choosing specific hydraulic cements according to the thickness of material to be used.

Fast-Setting Calcium Silicate-Based Pulp Capping Cements-Integrated Antibacterial, Irritation and Cytocompatibility Assessment

Calcium silicate-based cements (CSCs) are endodontic materials widely used in vital pulp-capping approaches. Concerning the clinical application, the reduced set time and pre-mixed formulations are relevant characteristics during the operative management of pulpal exposure, aiming to optimise the work time and improve cross-infection/asepsis control. Additionally, clinical success seems to be greatly dependent on the biological performance of the materials that directly contact the living pulp. As such, this work approaches an integrative biological characterisation (i.e., antibacterial, irritation, and cytocompatibility assays) of three fast-setting CSCs-Biodentine^TM, TotalFill^® BC RRM™ Fast Putty, and Theracal LC^®. These cements, after setting for 24 h, presented the expected topography and elemental composition (assessed by scanning electron microscopy, coupled with EDS analysis), in accordance with the information of the manufacturer. The set cements displayed a significant and similar antibiofilm activity against S. mutans, in a direct contact assay. Twenty-four-hour eluates were not irritant in the standardised CAM assay, but elicited distinct dose- and time-dependent cytotoxicity profiles on fibroblastic cells-i.e., Biodentine was devoid of toxicity, TotalFill presented a slight dose-dependent initial toxicity that was easily overcome, and Theracal LC was deleterious at high concentrations. When compared to long-setting ProRoot MTA cement, which highlighted the pursued integrative approach, Biodentine presented a similar profile, but TotalFill and Theracal LC displayed a poorer performance regarding antibiofilm activity/cytocompatibility features, and Theracal LC suggested eventual safety concerns.

Combination of Dental-Capping Agents with Low Level Laser Therapy Promotes Proliferation of Stem Cells from Apical Papilla

Background: Direct pulp capping is a vital pulp therapy, which stimulates differentiation of stem cells from apical papilla (SCAPs). SCAPs have multipotential capacity to differentiate into types of cells, contributing to the regeneration of tissues. Objective: Considering the promising effects of dental-capping materials, we aim to investigate the effect of dental dressing materials combined with laser therapy on the percentage of SCAP viability and the consequent dental regeneration capacity. Methods: We collected two immature third molar teeth and isolated SCAPs through collagenase type I enzymatic activity. Isolated SCAPs were then cultured with Dulbecco's modified Eagle's medium and α-minimum essential medium enriched with 15% and 10% fetal bovine serum, respectively. After reaching 70-80% confluency, cells were seeded in a 96-well plate and then treated with mineral trioxide aggregate (MTA), enamel matrix derivative (EMD), biodentine, and low level laser therapy (LLLT) alone and in combination for 24, 48, and 168 h. After that, cell survival rate was assessed using (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) (MTT) assay. Results: We found that combination of MTA, EMD, and LLLT as well as that of biodentine, EMD, and LLLT could lead to significant increase of SCAP viability as compared with other treatment groups. Combination of MTA and biodentine with EMD could also show increased level of SCAP proliferation and viability. However, MTA and biodentine alone reduced SCAP survival rate in all time points. Conclusions: Our conclusion is that LLLT can serve as an enhancer of SCAP proliferation and differentiation rate when added to dental-capping agents such as MTA, EMD, and biodentine. Thus, LLLT combination with effective capping materials will serve as a promising option for dental tissue repair.

Dental and composite resin discoloration induced by different hydraulic calcium silicate-based cements: two-year in vitro assessment

Few long-term studies assess the discoloration induced by hydraulic calcium silicate-based cement on dental structures. In addition, as far as we know, no long-term study has assessed the discoloration induced by these cement on composite resin. This in vitro study aimed to assess, during a period of two years, the discoloration potential of different hydraulic calcium silicate-based cements (hCSCs) on the enamel/dentin structure and composite resin restoration. A total of 40 enamel/dentin discs were obtained from bovine incisors, and 40 composite resin discs (10 mm in diameter × 2 mm thick) were fabricated. A 0.8 mm-deep cavity was made in the center of each disc and filled with the following hCSCs (n=10): Original MTA (Angelus); MTA Repair HP (Angelus); NeoMTA Plus (Avalon); and Biodentine (Septodont). An initial color measurement was performed (T0 - baseline). After 7, 15, 30, 45, 90, 300 days, and two years, new color measurements were performed to determine the color (ΔE00), lightness (ΔL'), chroma (ΔC'), hue differences (ΔH'), and whiteness index (WID). For enamel/dentin, the ΔE00 was significant among groups and periods (p<0.05). NeoMTA Plus had the greatest ΔE00. The NeoMTA Plus group had the greatest ΔE00 after two years for composite resin. Significant reduction in lightness was observed for all groups after two years (p<0.05). The most significant WID values were observed after 30 days for Biodentine (enamel/dentin) and MTA Repair HP groups (composite resin) (p<0.05). The hCSCs changed the colorimetric behavior of both substrates, leading to greater darkening over time. The Bi2O3 in the Original MTA seems relevant in the short periods of color change assessment.

Impact of photodynamic therapy on the marginal adaptation of Biodentine used as root-end filling material

BACKGROUND

The marginal adaptation of root-end filling materials and the effective antibacterial control in a surgical site are crucial for the successful outcome of endodontic surgery.

OBJECTIVE

This study aimed to evaluate the effect of retrograde application of photodynamic therapy on the marginal adaptation of Biodentine used as a root-end filling material.

METHODS

Twenty single-rooted anterior teeth were selected, instrumented and obturated with gutta-percha and AH Plus. The apical 3 mm of the roots were resected and root-end cavities were prepared with an ultrasonic retro-tip. The teeth were randomly divided into two groups (n = 10). In the first group, photodynamic therapy (PDT) was applied in the retrograde cavity prior to the root-end filling. In the second group retro cavity was filled without PDT. All specimens were obturated with Biodentine and afterwards sectioned longitudinally. The gap width at the material-dentin interface was measured using a scanning electron microscope. The results were statistically analyzed.

RESULTS

The produced gap width by Biodentine/PDT was 3.85 μm versus 2.68 μm in the Biodentine control group with significant differences in-between.

CONCLUSION

Under the conditions of this study, PDT has a negative effect on the marginal adaptation of Biodentine used as root-end filling material.

Biodentine Inhibits the Initial Microbial Adhesion of Oral Microbiota In Vivo

This study aimed to evaluate the in vivo initial microbial adhesion of oral microorganisms on the biomaterial Biodentine compared to MTA and AH Plus. Cylindrical samples of the materials were prepared, and dentin slabs served as a control. An individual intraoral lower jaw splint served as a carrier for the samples and was worn by six volunteers. The specimens were worn for 120 min. Adherent bacteria were quantified by determining the colony-forming units (CFUs), while the visualization and quantification of total adherent microorganisms were facilitated by using DAPI and live/dead staining combined with fluorescence microscopy. Bovine dentin had a significantly higher number of aerobic CFUs compared to Biodentine (p = 0.017) and MTA (p = 0.013). The lowest amounts of DAPI-stained adherent microorganisms were quantified for Biodentine (15% ± 9%) and the control (18% ± 9%), while MTA showed the highest counts of initially adherent microorganisms (38% ± 10%). Significant differences were found for MTA and Biodentine (p = 0.004) as well as for MTA and the control (p = 0.021) and for AH Plus and the control (p = 0.025). Biodentine inhibited microbial adherence, thereby yielding an antimicrobial effectivity similar to that of MTA.

Biomimetic Approaches in Clinical Endodontics

In the last few decades, biomimetic concepts have been widely adopted in various biomedical fields, including clinical dentistry. Endodontics is an important sub-branch of dentistry which deals with the different conditions of pulp to prevent tooth loss. Traditionally, common procedures, namely pulp capping, root canal treatment, apexification, and apexigonesis, have been considered for the treatment of different pulp conditions using selected materials. However, clinically to regenerate dental pulp, tissue engineering has been advocated as a feasible approach. Currently, new trends are emerging in terms of regenerative endodontics which have led to the replacement of diseased and non-vital teeth into the functional and healthy dentine-pulp complex. Root- canal therapy is the standard management option when dental pulp is damaged irreversibly. This treatment modality involves soft-tissue removal and then filling that gap through the obturation technique with a synthetic material. The formation of tubular dentine and pulp-like tissue formation occurs when stem cells are transplanted into the root canal with an appropriate scaffold material. To sum up tissue engineering approach includes three components: (1) scaffold, (2) differentiation, growth, and factors, and (3) the recruitment of stem cells within the pulp or from the periapical region. The aim of this paper is to thoroughly review and discuss various pulp-regenerative approaches and materials used in regenerative endodontics which may highlight the current trends and future research prospects in this particular area.

Assessment of Cytotoxicity and Odontogenic/Osteogenic Differentiation Potential of Nano-Dentine Cement Against Stem Cells from Apical Papilla

OBJECTIVE

Assessment of the cytotoxicity of novel calcium silicate-based cement is imperative in endodontics. This experimental study aimed to assess the cytotoxicity and odontogenic/osteogenic differentiation potential of a new calcium silicate/pectin cement called Nano-dentine against stem cells from the apical papilla (SCAPs).

MATERIALS AND METHODS

In this experimental study, the cement powder was synthesized by the sol-gel technique. Zirconium oxide was added as opacifier and Pectin, a plant-based polymer, and calcium chloride as the liquid to prepare the nano-based dental cement. Thirty-six root canal dentin blocks of human extracted single-canal premolars with 2 mm height, flared with #1, 2 and 3 Gates-Glidden drills were used to prepare the cement specimens. The cement, namely mineral trioxide aggregate (MTA), Biodentine, and the Nano-dentine were mixed according to the manufacturers' instructions and applied to the roots of canal dentin blocks. The cytotoxicity and odontogenic/osteogenic potential of the cement were evaluated by using SCAPs.

RESULTS

SCAPs were characterized by the expression of routine mesenchymal cell markers and differentiation potential to adipocytes, osteoblasts, and chondrocytes. Cement displayed no significant differences in cytotoxicity or calcified nodules formation. Gene expression analysis showed that all three types of cement induced significant down- regulation of COLA1; however, the new cement induced significant up-regulation of RUNX2 and SPP1 compared to the control group and MTA. The new cement also induced significant up-regulation of TGFB1 and inducible nitric oxide synthase (iNOS) compared with Biodentine and MTA.

CONCLUSION

The new Nano-dentin cement has higher odontogenic/osteogenic potential compared to Biodentine and MTA for differentiation of SCAPs to adipocytes, osteoblasts, and chondrocytes.

Biocompatible Properties and Mineralization Potential of Premixed Calcium Silicate-Based Cements and Fast-Set Calcium Silicate-Based Cements on Human Bone Marrow-Derived Mesenchymal Stem Cells

Premixed calcium silicate-based cements (CSCs) and fast-set CSCs were developed for the convenience of retrograde filling during endodontic microsurgery. The aim of this study was to analyze the biocompatible properties and mineralization potential of premixed CSCs, such as Endocem MTA Premixed (EM Premixed) and EndoSequence BC RRM putty (EndoSequence), and fast-set RetroMTA on human bone marrow-derived mesenchymal stem cells (BMSCs) compared to ProRoot MTA. Using CCK-8, a significantly higher proliferation of BMSCs occurred only in the EM Premixed group on days 2 and 4 (p < 0.05). On day 6, the ProRoot MTA group had significantly higher cell proliferation than the control group (p < 0.05). Regardless of the experimental materials, all groups had complete cell migration by day 4. Alizarin Red-S staining and alkaline phosphatase assay demonstrated higher mineralization potential of all CSCs similar to ProRoot MTA (p < 0.05). The EndoSequence group showed more upregulation of SMAD1 and OSX gene expression than the other experimental groups (p < 0.05), and all experimental cements upregulated osteogenic gene expression more than the control group (p < 0.05). Therefore, using premixed CSCs and fast-set CSCs as retrograde filling cements may facilitate satisfactory biological responses and comparable osteogenic potential to ProRoot MTA.

Conservative Therapy of External Invasive Cervical Resorption with Adhesive Systems: A 6-Year Follow-Up Case Report and Literature Review

The diagnosis and treatment of external invasive cervical resorption (EICR) could be a challenging clinical situation even for the most experienced dentists. It is a fairly rare lesion and a poorly understood phenomenon, and its insidious and aggressive nature can lead to tooth loss. Even in the era of dental implants, trying to save a compromised tooth is imperative for any clinician. This report presents a case of an upper central incisor with a class II Heithersay EICR in which treatment was performed using a multidisciplinary approach and the defect was restored with resin composite. The surgery in which the defect was exposed and repaired was followed by an endodontic treatment and the placement of a fiber-reinforced post. In this case, the use of modern materials, such as resin composites, allowed not only the avoidance of tooth extraction but also the achievement of satisfactory aesthetic results. The 6-year follow-up demonstrated the success of therapy and the resolution of clinical symptoms. This case report highlights the importance of early detection of EICR and how composite resins could provide an effective and aesthetic restauration of the defect, which favors the health of the surrounding gingival tissue.

Bioactive Inorganic Materials for Dental Applications: A Narrative Review

Over time, much attention has been given to the use of bioceramics for biomedical applications; however, the recent trend has been gaining traction to apply these materials for dental restorations. The bioceramics (mainly bioactive) are exceptionally biocompatible and possess excellent bioactive and biological properties due to their similar chemical composition to human hard tissues. However, concern has been noticed related to their mechanical properties. All dental materials based on bioactive materials must be biocompatible, long-lasting, mechanically strong enough to bear the masticatory and functional load, wear-resistant, easily manipulated, and implanted. This review article presents the basic structure, properties, and dental applications of different bioactive materials i.e., amorphous calcium phosphate, hydroxyapatite, tri-calcium phosphate, mono-calcium phosphate, calcium silicate, and bioactive glass. The advantageous properties and limitations of these materials are also discussed. In the end, future directions and proposals are given to improve the physical and mechanical properties of bioactive materials-based dental materials.

An in vitro evaluation of antimicrobial activity of a fast-setting endodontic material

The aim of this study is to evaluate the antimicrobial activity of the fast-setting iRoot Fast Set Root Repair Material (iRoot FS), Mineral trioxide aggregate (MTA) and Biodentine. The materials were freshly mixed or set for 1 and 7 days to conduct the agar diffusion test, direct contact test and carry-over effect test against E. faecalis and P. gingivalis, and the pH values were also measured. The data were analyzed by an analysis of variance and one-way ANOVA or Dunnett's T3 test, and the Tukey's post hoc test for multiple comparisons (α = 0.05). In the direct contact test, all three materials showed good antibacterial activity after setting for 20 min. The antibacterial properties of the three materials decreased with the increase of setting time (p < 0.05). The suspension of all the three materials showed high pH values (11-12) and no significant difference was observed (p > 0.05). With the extension of setting time, the pH of iRoot FS and Biodentine slightly decreased (p < 0.05). Fresh iRoot FS, Biodentine, and MTA killed E. faecalis and P. gingivalis effectively, but their antimicrobial effect decreased after 24 h, and distinctly decreased after 7 days after mixing. iRoot FS, Biodentine, and MTA showed a tendency of alkalinity during this 7-day experiment.

Influence of Acidic Environmental Conditions on Push-Out Bonding Strength of Four Calcium Silicate-Based Materials to Root Dentin

Introduction. Calcium silicate-based cements (CSCs) are frequently used in various endodontic procedures such as perforation repair, vital pulp therapy, regenerative treatments, or apexification. One of their areas of use, treatment of perforations, can be challenging in clinical practice. Selection of stable, durable, and compatible material with structural and biological alterations is a must in such situations. Aim. This study aimed to compare the dislocation resistance of various calcium-silicate-containing materials used in endodontic treatment exposed to various environmental conditions in a push-out study model. Methods. Selected ninety-six human mandibular premolars with single root canals were cut from the middle portion to obtain dentin slices of 2 mm thickness (n = 192). Then, the canal lumen was enlarged by using #4Gates-Glidden drills. Specimens for each repair material (MTA, Angelus, Endosequence RRM (ERRM), Biodentine, BioMTA) were placed in shaped lumens, wrapped in pieces of gauze, and randomly divided into four groups (n = 48) according to the storage time and media: group A: 4 days in phosphate-buffered saline (PBS), group B: 4 days in acetic acid (pH = 4.4), group C: 34 days in PBS, and group D: 4 days in acetic acid (pH = 4.4) followed by exposure to PBS for 30 days. A universal testing machine measured the dislodgement resistance followed by scanning electron microscopy imaging to evaluate the material-dentin interface. Results. ERRM showed the highest dislocation resistance in all test groups ( $p<0.05$ ). The greatest bonding strength was observed (13,54 ± 5,56 MPa) after exposure to 34 days in PBS (pH = 7.2). The values for ERRM decreased in contact with acetic acid (pH = 4.4) and increased when placed in PBS ( $p>0.05$ ). Conclusion. All repair materials showed a higher dislocation resistance when stored in PBS regardless of storage time. However, the improved pH of the surrounding media was not successful in reversing the deteriorating effect caused by lower pH in relation to dislocation resistance in all tested materials except for ERRM.

The Immunomodulatory and Regenerative Effect of Biodentine™ on Human THP-1 Cells and Dental Pulp Stem Cells: In Vitro Study

Background

Pulp tissue affected by deep caries and trauma can be protected by vital pulp therapies in which pulp regeneration success depends on the degree of pulp inflammation and the presence of regenerative signals. Reparative dentinogenesis requires dental pulp stem cell (DPSC) activity which can be stimulated by many bioactive molecules to repair the dentine, mediating a balance between the inflammatory response and the reparative events. Therefore, this study was performed in order to investigate the immune-inflammatory effect of Biodentine capping material on DPSCs and macrophages.

Method

THP-1, a human monocytic cell line, was differentiated to macrophages, and flow cytometry was used to analyze the expressions of specific macrophage markers. LPS-mediated infection was created for macrophages and DPSCs followed by treatment with Biodentine. CBA array was used to investigate the cytokine secretion followed by qPCR. Migration potential of treated DPSCs was also determined.

Results

Our results showed that THP-1 cell line was successfully differentiated into macrophages as shown by surface marker expression. CBA array and qPCR results showed that Biodentine-treated DPSCs and macrophages upregulated anti-inflammatory cytokines and downregulated proinflammatory cytokines. Also, Biodentine enhances the migration potential of treated DPSCs.

Conclusion

Biodentine capping material mediated the polarization of M1 to M2 macrophages suggestive of tissue repair properties of macrophages and enhanced the anti-inflammatory cytokines of DPSCs responsible for dentine-pulp regeneration.

Effect of Different Adhesive Strategies on the Microshear Bond Strength of Calcium-Silicate-Based Materials

Aim:

To evaluate the microshear bond strength (µSBS) of mineral trioxide aggregate and Biodentine to various resin-based materials using different adhesive strategies.

Materials and Methods:

Three resin-based materials—a self-adhering resin composite with or without acid etching (Vertise flow; Kerr, Orange, CA, USA), a conventional flowable composite with a total-etch adhesive (Filtek Ultimate Flowable; 3M ESPE, St. Paul, MN, USA), and a flowable resin-modified glass ionomer cement (RMGIC) without any surface modification (Ionoseal; VOCO GmbH, Cuxhaven, Germany)—and two calcium-silicate-based materials—Biodentine and BIOfactor mineral trioxide aggregate (MTA)—were tested. A total of 100 cylindrical acrylic molds were prepared. Biodentine and BIOfactor MTA were prepared and placed into the central holes on the molds. Specimens were divided into two main groups according to materials and into five subgroups ( n = 10). µSBS were evaluated using a µSBS testing device. The failure modes were examined under a stereomicroscope with magnification. They were categorized as adhesive, cohesive, or mixed. Data were analyzed using two-way analysis of variance (ANOVA) and Tukey test. The significance level was taken as α = 0.05.

Results:

It was observed that both calcium-silicate-based material type and resin-based material type influenced the µSBS significantly according to two-way ANOVA. Biodentine exhibited higher bond strength values than MTA. However, no statistically significant interaction was demonstrated between these factors ( P = .396). The µSBS values of intermediate materials to Biodentine and MTA were listed from the lowest to the highest as follows: RMGIC < Acid Etch + RMGIC < SARC (self-adhering resin composite) < FC (flowable composite) < Acid Etch + SARC.

Conclusion:

Self-adhering composites can be used on calcium-silicate-based materials in vital pulp treatments because of their mechanical properties. Acid-etching ensures high µSBS values. Although the µSBS of Biodentine were higher than MTA according to this study’s results, there was no statistically significant difference in µSBS of FC and acid-etched SARC to MTA.

The applications of polysaccharides in dentistry

Polysaccharides are natural polymers widely present in animals, plants, and several microorganisms. Polysaccharides have remarkable properties, including easy extractions, degradability, and renewability, and have no apparent toxicity, making them ideal for biomedical applications. Moreover, polysaccharides are suitable for repairing oral tissue defects and treating oral diseases due to their excellent biocompatibility, biosafety, anti-inflammatory, and antibacterial properties. The oral cavity is a relatively complex environment vulnerable to numerous conditions, including soft tissue diseases, hard tissue disorders, and as well as soft and hard tissue diseases, all of which are complex to treat. In this article, we reviewed different structures of natural polysaccharides with high commercial values and their applications in treating various oral disease, such as drug delivery, tissue regeneration, material modification, and tissue repair.

Bioactive potential of Bio-C Pulpo is evidenced by presence of birefringent calcite and osteocalcin immunoexpression in the rat subcutaneous tissue

As the biocompatibility and bioactive potential of repair materials are desired characteristics in dentistry, the tissue response of Bio-C Pulpo, a bioceramic material launched on the marked by Angelus (Brazil), was compared with Biodentine (Septodont, France) and White MTA (WMTA; Angelus, Brazil). In 32 rats, 148 polyethylene tubes filled with Bio-C Pulpo, Biodentine or WMTA, and empty (CG, control group) were implanted into subcutaneous tissues for 7, 15, 30, and 60 days. The capsule thickness, numerical density of inflammatory cells (IC) and fibroblasts (Fb), amount of collagen, immunohistochemistry detection of interleukin-6 (IL-6) and osteocalcin (OCN), von Kossa and analysis under polarized light were performed. Data were subjected to two-way ANOVA followed by Tukey's test (p ≤ 0.05). At 7 and 15 days, the capsules around Bio-C Pulpo were thicker than in WMTA while, at 30 and 60 days, significant differences were not observed among the groups. Although at 7, 15, and 30 days, a greater number of IL-6-immunostained cells was found in Bio-C Pulpo and Biodentine than in WMTA, no significant difference was detected among the groups at 60 days. In all groups, the number of Fb and collagen content increased significantly over time. The capsules around materials exhibited von Kossa-positive and birefringent structures, and OCN-immunostained cells whereas, in the CG, these structures were not observed. Bio-C Pulpo, similarly to Biodentine and WMTA, is biocompatible, allows the connective tissue repair and presents bioactive potential in connective tissue of rats.