Optimization of Process Parameters by Statistical Experimental Designs for the Production of Naringinase Enzyme by Marine Fungi

Naringinase Biosynthesis by Aspergillus niger on an Optimized Medium Containing Red Grapefruit Albedo

This study aimed to develop a method of naringinase biosynthesis by Aspergillus niger KMS on an optimized culture medium. The concentration of the six medium components in shake flasks was optimized by the Box and Wilson factor gradient method. Naringinase's substrate, naringin, powdered albedo, flavedo, and red grapefruit segment membranes were used to stimulate naringinase biosynthesis. Rhamnose was chosen as the carbon source, while the nitrogen source was yeast extract and sodium nitrate. Naringinase biosynthesis was most favorable in the culture medium with the following composition (g 100 mL): 3.332-NaNO3; 3.427-yeast extract; 0.184-KH2PO4; 0.855-red grapefruit albedo; 0.168-naringin; 2.789-rhamnose. The obtained Aspergillus niger KMS culture fluid was concentrated, thereby precipitating the protein. As a result, a naringinase preparation with high activity, equal to 816 µmol × min-1 × g-1, was obtained.

The secondary metabolites from Beauveria bassiana PQ2 inhibit the growth and spore germination of Gibberella moniliformis LIA

Fungal secondary metabolites with antimicrobial properties are used for biological pest control. Their production is influenced by several factors as environment, host, and culture conditions. In the present work, the secondary metabolites from fermented extracts of Beauveria bassiana PQ2 were tested as antifungal agents against Gibberella moniliformis LIA. The L18 (21 × 37) orthogonal array from Taguchi methodology was used to assess 8 parameters (pH, agitation, sucrose, yeast extract, KH2PO4, MgSO4, NH4NO3, and CaCl2) in B. bassiana PQ2 submerged fermentation. The ability of the fermented extracts to slow down the growth rate of G. moniliformis LIA was evaluated. The results from 18 trials were analyzed by Statistica 7 software by evaluating the signal-to-noise ratio (S/N) to find the lower-the-better condition. Optimal culture conditions were pH, 5; agitation, 250 rpm; sucrose, 37.5 g/L-1; yeast extract, 10 g/L-1; KH2PO4, 0.8 g/L-1; MgSO4, 1.2 g/L-1; NH4NO3, 0.1 g/L-1; and CaCl2, 0.4 g/L-1, being the agitation at the highest level the most significant factor. The optimal conditions were validated in a sparged bottle bioreactor resulting in a higher S/N value (12.48) compared to the estimate. The extract obtained has the capacity to inhibit the germination of G. moniliformis spores at 24 h. HPLC-ESI-MS2 allowed to identify the water-soluble red pigment as oosporein (m/z 304.9). The secondary metabolites from B. bassiana PQ2 are a suitable alternative to control the growth and sporulation of G. moniliformis.

Optimization of process parameters for naringinase production by Aspergillus tubingensis UA13 and pilot scale-up study

To improve the naringinase production of Aspergillus tubingensis UA13, shorten the fermentation period, and verify its industrial application value, naringinase production conditions were optimized, and 5 L scale-up study in stirred tank bioreactor was carried out. Parameters, including carbon, nitrogen sources and inducer, optimal seed age, inoculum amount, temperature and pH, were adjusted and optimized in shaking flask. Keeping pH at the optimal value 6 in bioreactor, dissolved oxygen was monitored during the fermentation and the optimal stirring rate was investigated. In 5 L scale-up study, the highest naringinase activity was 72.62 U/mL, which was 1.75 times higher than that (41.52 U/mL) in shaking flask and the fermentation period was shortened by 24 h.

Isolation, identification and optimization of enhanced production of laccase from Galactomyces geotrichum under solid-state fermentation

Laccases are a group of oxidases that catalyze the oxidation of a wide range of electron rich substrates like phenolic compounds, lignin and aromatic amines. They are of interest because of their potential to be used in environmental and industrial applications. In this research, potent laccase producer fungi were screened and isolated from olive mill wastewater (OMW). One of the 23 isolated fungi was identified as Galactomyces geotrichum based on 18S rDNA sequence analysis that detected good laccase activity. Produced laccase had a molecular weight of 55 kDa that was confirmed by zymogram analysis. This is the first report about the optimization of laccase Production by G. geotrichum under solid-state fermentation. The optimization was made by the Taguchi design of experiments (DOE) methodology. An orthogonal array (L25) was designed using Minitab 19 software to study four effective process factors in five levels for laccase production. The optimum condition derived was; moisture content (80%), fermentation time (14 day), CuSO₄⋅5H₂O as the inducer (300 μM), glucose as a co-substrate (5 g/L). Maximum laccase activity of 52.86 (U/g of dry substrate) was obtained using optimum fermentation condition. This study aimed to better understand the laccase producing microorganisms in OMW and take them to OMW treatment that is rich in phenolic compounds.

Covalent immobilization of microbial naringinase using novel thermally stable biopolymer for hydrolysis of naringin

Naringinase induced from the fermented broth of marine-derived fungus Aspergillus niger was immobilized into grafted gel beads, to obtain biocatalytically active beads. The support for enzyme immobilization was characterized by ART-FTIR and TGA techniques. TGA revealed a significant improvement in the grafted gel's thermal stability from 200 to 300 °C. Optimization of the enzyme loading capacity increased gradually by 28-fold from 32 U/g gel to 899 U/g gel beads, retaining 99 % of the enzyme immobilization efficiency and 88 % of the immobilization yield. The immobilization process highly improved the enzyme's thermal stability from 50 to 70 °C, which is favored in food industries, and reusability test retained 100 % of the immobilized enzyme activity after 20 cycles. These results are very useful on the marketing and industrial levels.