Evaluation of the methanogenic potential of anaerobic digestion of agro-industrial wastes

Waste management technologies have become a way to generate value-added products. Anaerobic digestion (AD) allows biogas generation by treating organic wastes. In this work, the methanogenic potentials of anaerobic digestion of rumen and chicken manure, two typical agro-industrial wastes from the Colombian Caribbean region, were evaluated. On a first stage, the effect of temperature on anaerobic digestion of manure inoculated with liquid rumen was measured. Results revealed that the thermophilic digestion produces more biogas (up to 47% higher than the mesophilic digestion), but the mesophilic digestion has better biogas quality (up to 20% more methane than the thermophilic digestion). On the second experimental stage, it was assessed the effect of temperature regimen and the addition of fat-oil-grease (FOG) on cumulative biogas production, methane percentage, and physicochemical parameters. It was found that the anaerobic digestion of the rumen with FOG in mesophilic conditions had the best performance in terms of quantity and quality of biogas (2520 NL CH₄/kg VS, CH₄ 93%, H₂S 1 mg/L, H₂O 16 mg/L). Finally, rumen and manure had methane concentrations above 40% in all cases studied, after 60 days of anaerobic digestion. It was concluded that rumen and manure are good candidates for biogas generation.

"Bacterial consortium from hydrothermal vent sediments presents electrogenic activity achieved under sulfate reducing conditions in a microbial fuel cell"

PURPOSE

The aim of the present work was to assess the electrogenic activity of bacteria from hydrothermal vent sediments achieved under sulfate reducing (SR) conditions in a microbial fuel cell design with acetate, propionate and butyrate as electron donors.

METHODS

Two different mixtures of volatile fatty acids (VFA) were evaluated as the carbon source at two chemical oxygen demand (COD) proportions. The mixtures of VFA used were: acetate, propionate and butyrate COD: 3:0.5:0.5 (stage 1) and acetate - butyrate COD: 3.5:0.5 (stage 2). Periodical analysis of sulfate (SO₄ ^-2), sulfide (HS^-) and COD were conducted to assess sulfate reduction (SR) and COD removal along with measurements of voltage and current to assess the global performance of the consortium in the system.

RESULTS

Percentage of SR was of 97.5 ± 0.7 and 74.3 ± 1.5% for stage 1 and 2, respectively. The % COD removal was of 91 ± 2.1 and 75.3 ± 9.6 for stage 1 and 2, respectively. Although SR and COD removal were higher at stage 1, in regards of energy, stage 2 presented higher current and power densities and Coulombic efficiency as follows: 741.7 ± 30.5 μA/m², 376 ± 34.4 μW/m² and 5 ± 2.7%, whereas for stage 1 these values were: 419 ± 71 μA/m², 52.7 ± 18 μW/m² and 0.02%, respectively. A metagenomic analysis - stage 2 - in the anodic chamber, demonstrated that SR was due to Dethiosulfovibrionaceae (HA73), Desulfobacter and Desulfococcus and the electrogenic microorganisms were Planococcus, SHD-231, Proteiniclasticum, vadinCA02, and families Porphyromonadacea and Pseudomonadaceae.

CONCLUSIONS

It was demonstrated that microorganisms prevenient from hydrothermal vent sediments adapted to a microbial fuel cell system are able to generate electricity coupled to 74.3 ± 1.5 and 75.3 ± 9.6% of SR and COD removal respectively, with a mixture of acetate - butyrate.

Mass conversion pathway during anaerobic digestion of wheat straw

A material flow analysis (MFA) method was employed to investigate elemental flow direction during the anaerobic digestion (AD) of wheat straw (WS) pretreated with potassium hydroxide. A lab-scale batch AD experiment conducted at 35 ± 1 °C was investigated to realize carbon conversion in biogas, liquid and solid digestates. The results showed that the highest growth rate of carbon conversion in biogas was observed from the fourth day to the twenty-fourth day, which accounted for 70.64%. The cumulative biogas production of WS was 531 mL g-1 VS, along with a high volatile solids degradation rate (55.0%). The MFA results indicated that the flow mass fractions of carbon in biogas, liquid and solid digestates were 49.96%, 5.61% and 44.43%, respectively. The flow mass fraction of nitrogen in liquid and solid digestates was 45.65% and 54.35%, respectively. This study can provide a theoretical basis for elemental flow in each product from biogas projects.

An overview of physico-chemical mechanisms of biogas production by microbial communities: a step towards sustainable waste management

Biogas is a combination of methane, CO₂, nitrogen, H₂S and traces of few other gases. Almost any organic waste can be biologically transformed into biogas and other energy-rich organic compounds through the process of anaerobic digestion (AD) and thus helping in sustainable waste management. Although microbes are involved in each step of AD, knowledge about those microbial consortia is limited due to the lack of phylogenetic and metabolic data of predominantly unculturable microorganisms. However, culture-independent methods like PCR-based ribotyping has been successfully employed to get information about the microbial consortia involved in AD. Microbes identified have been found to belong mainly to the bacterial phyla of Proteobacteria, Chloroflexi, Firmicutes and Bacteroidetes. Among the archaeal population, the majority have been found to be methanogens (mainly unculturable), the remaining being thermophilic microbes. Thus, the AD process as a whole could be controlled by regulating the microbial consortia involved in it. Optimization in the feedstock, pH, temperature and other physical parameters would be beneficial for the microbial growth and viability and thus helpful for biogas production in AD. Besides, the biogas production is also dependent upon the activity of several key genes, ion-specific transporters and enzymes, like genes coding for methyl-CoM reductase, formylmethanofuran transferase, formate dehydrogenase present in the microbes. Fishing for these high-efficiency genes will ultimately increase the biogas production and sustain the production plant.