Optimization (central composite design) and validation of HPLC method for investigation of emtricitabine loaded poly(lactic-co-glycolic acid) nanoparticles: in vitro drug release and in vivo pharmacokinetic studies

Red blood cell-derived materials for cancer therapy: Construction, distribution, and applications

Cancer has become an increasingly important public health issue owing to its high morbidity and mortality rates. Although traditional treatment methods are relatively effective, they have limitations such as highly toxic side effects, easy drug resistance, and high individual variability. Meanwhile, emerging therapies remain limited, and their actual anti-tumor effects need to be improved. Nanotechnology has received considerable attention for its development and application. In particular, artificial nanocarriers have emerged as a crucial approach for tumor therapy. However, certain deficiencies persist, including immunogenicity, permeability, targeting, and biocompatibility. The application of erythrocyte-derived materials will help overcome the above problems and enhance therapeutic effects. Erythrocyte-derived materials can be acquired via the application of physical and chemical techniques from natural erythrocyte membranes, or through the integration of these membranes with synthetic inner core materials using cell membrane biomimetic technology. Their natural properties such as biocompatibility and long circulation time make them an ideal choice for drug delivery or nanoparticle biocoating. Thus, red blood cell-derived materials are widely used in the field of biomedicine. However, further studies are required to evaluate their efficacy, in vivo metabolism, preparation, design, and clinical translation. Based on the latest research reports, this review summarizes the biology, synthesis, characteristics, and distribution of red blood cell-derived materials. Furthermore, we provide a reference for further research and clinical transformation by comprehensively discussing the applications and technical challenges faced by red blood cell-derived materials in the treatment of malignant tumors.

Experimental central composite design-based dispersive liquid-liquid microextraction for HPLC-DAD determination of diazinon in human urine samples: method development and validation

Diazinon poisoning is an important issue in occupational, clinical, and forensic toxicology. While sensitive and specific enough to analyse diazinon in biological samples, current methods are time-consuming and too expensive for routine analysis. The aim of this study was therefore to design and validate a simple dispersive liquid-liquid microextraction (DLLME) for the preparation of urine samples to be analysed for diazinon with high performance liquid chromatography with diode-array detector (HPLC-DAD) to establish diazinon exposure and poisoning. To do that, we first identified critical parameters (type and volume of extraction and disperser solvents, pH, surfactant, and salt concentrations) in preliminary experiments and then used central composite design to determine the best experimental conditions for DLLME-HPLC-DAD. For DLLME they were 800 µL of methanol (disperser solvent) and 310 µL of toluene (extraction solvent) injected to the urine sample rapidly via a syringe. The sample was injected into a HPLC-DAD (C18 column, 250×4.6 mm, 5 μm), and the mobile phase was a mixture of acetonitrile and buffer (63:37 v/v, pH 3.2; flow rate: 1 mL/ min). Standard calibration curves for diazinon were linear with the concentration range of 0.5-4 µg/mL, yielding a regression equation Y=0.254X+0.006 with a correlation coefficient of 0.993. The limit of detection and limit of quantification for diazinon were 0.15 µg/mL and 0.45 µg/mL, respectively. The proposed method was accurate, precise, sensitive, and linear over a wide range of diazinon concentrations in urine samples. This method can be employed for diazinon analysis in routine clinical and forensic toxicology settings.

Simultaneous Estimation of Apremilast and Betamethasone Dipropionate in Microsponge-Based Topical Formulation using a Stability Indicating RP-HPLC Method: A Quality-by-Design Approach

A stability-indicating reverse phase high-performance liquid chromatography method was developed and validated for simultaneous quantification of apremilast (APL) and betamethasone dipropionate (BD) in bulk as well as drug loaded microsponges. Various mobile phase systems were screened to check the system suitability followed by force degradation analysis to determine APL and BD stability under varying stress conditions. A central composite design model was used to optimize the column temperature and flow rate using Design Expert® (9.0.1). One factor at a time approach with five independent factors were used to validate the robustness of the method. Finally, APL and BD were precisely and accurately quantified from drug loaded microsponges using the validated method. A favorable separation of APL and BD was obtained on a Phenomenex® Luna C18 column using a mixture of 50 mM phosphate buffer containing 0.1% triethylamine (pH 6.1) and acetonitrile (60:40%v/v) as mobile phase. Both the drugs were found to be stable when exposed to stressors such as heat-, light-, alkali-, acid- and peroxide-induced degradation. The calibration curves were found to be linear with appreciable limit of detection and limit of quantification. Recovery and percentage relative standard deviation of peak areas for APL and BD were found to be < 2.0% and 99-100% in bulk drug solution and <2.0% and 99-103% in microsponge formulation, respectively. Statistical analysis using analysis of variance indicated that the model was significant (P < 0.001). Hence, the developed method can be effectively used to quantify APL and BD, both in bulk as well as microsponge formulations.

A comparison of models for the analysis of the kinetics of drug release from PLGA-based nanoparticles

Purpose

Poly (lactic-co-glycolic acid) has received much academic attention for developing nanotherapeutics and FDA has approved it for several applications. An important parameter that dictates the bioavailability and hence the biological effect of the drug is drug release from its delivering system. This study offers a comparative mathematical analysis of drug release from Poly (lactic-co-glycolic acid)–based nanoparticles to suggest a general model explaining multi-mechanistic release they provide.

Methods

Eight release models, zero order, first order, Higuchi, Hixson-Crowell, the square root of mass, the three-second root of mass, Weibull and Korsmeyer-Peppas, as well as the second degree polynomial equation were applied to 60 data sets. The models analysed regarding several types of errors, regression parameters and average Akaike information criterion.

Results and discussion

Most of the data sets present the highest R², the lowest overall error and AIC for the Weibull model. Weibull model with the mean AIC = -36.37 and mean OE = 7.24 and the highest NE less than 5, 10, 15 and 20 % in most of the cases best fits the release data from various PLGA-based drug delivery systems that are studied. Weibull model seems to show enough flexibility to describe various release patterns PLGA provides.

Reverse Transcriptase Inhibitors Nanosystems Designed for Drug Stability and Controlled Delivery

An in-depth analysis of nanotechnology applications for the improvement of solubility, distribution, bioavailability and stability of reverse transcriptase inhibitors is reported. Current clinically used nucleoside and non-nucleoside agents, included in combination therapies, were examined in the present survey, as drugs belonging to these classes are the major component of highly active antiretroviral treatments. The inclusion of such agents into supramolecular vesicular systems, such as liposomes, niosomes and lipid solid NPs, overcomes several drawbacks related to the action of these drugs, including drug instability and unfavorable pharmacokinetics. Overall results reported in the literature show that the performances of these drugs could be significantly improved by inclusion into nanosystems.

Improving the clinical relevance of a mouse pregnancy model of antiretroviral toxicity; a pharmacokinetic dosing-optimization study of current HIV antiretroviral regimens

Animal models can be useful tools for the study of HIV antiretroviral (ARV) safety/toxicity in pregnancy and the mechanisms that underlie ARV-associated adverse events. The utility and translatability of animal model-based ARV safety/toxicity data is improved if ARVs are tested in clinically relevant concentrations. The objective of this work was to improve the clinical relevance of our mouse pregnancy model of ARV toxicity, by determining the doses of currently prescribed ARV regimens that would yield human therapeutic plasma concentrations. Pregnant mice were administered increasing doses of ARV combinations by oral gavage, followed by measurement of drug concentrations in the maternal plasma and amniotic fluid. Concentrations of ten different ARVs in maternal plasma and amniotic fluid samples of pregnant mice are presented, with dosing optimization to yield human pregnancy-relevant plasma drug concentrations. We have proposed optimal dosing for different regimen component drugs to achieve human therapeutic plasma levels, so that a clinically relevant standard dosing is established. A review of related ARV pharmacokinetic studies in (pregnant/non-pregnant) rodents and human pregnancy is also shown. We hope these data will inform and encourage the use of mouse pregnancy models in the study of ARV safety/toxicity.

An Enhanced Emtricitabine-Loaded Long-Acting Nanoformulation for Prevention or Treatment of HIV Infection

Among various FDA-approved combination antiretroviral drugs (cARVs), emtricitabine (FTC) has been a very effective nucleoside reverse transcriptase inhibitor. Thus far, FTC is the only deoxycytidine nucleoside analog. However, a major drawback of FTC is its large volume distribution (averaging 1.4 liters/kg) and short plasma half-life (8 to 10 h), necessitating a high daily dosage. Thus, we propose an innovative fabrication method of loading FTC in poly(lactic-co-glycolic acid) polymeric nanoparticles (FTC-NPs), potentially overcoming these drawbacks. Our nanoformulation demonstrated enhanced FTC loading (size of <200 nm and surface charge of -23 mV) and no to low cytotoxicity with improved biocompatibility compared to those with FTC solution. An ex vivo endosomal release assay illustrated that NP entrapment prolongs FTC release over a month. Intracellular retention studies demonstrate sustained FTC retention over time, with approximately 8% (24 h) to 68% (96 h) release with a mean retention of ∼0.74 μg of FTC/10⁵ cells after 4 days. An in vitro HIV-1 inhibition study demonstrated that FTC-NP treatment results in a 50% inhibitory concentration (IC₅₀) ∼43 times lower in TZM-bl cells (0.00043 μg/ml) and ∼3.7 times lower (0.009 μg/ml) in peripheral blood mononuclear cells (PBMCs) than with FTC solution (TZM-bl cells, 0.01861, and PBMCs, 0.033 μg/ml). Further, on primary PBMCs, FTC-NPs also illustrate an HIV-1 infection blocking efficacy comparable to that of FTC solution. All the above-described studies substantiate that FTC nanoformulation prolongs intracellular FTC concentration and inhibition of HIV infection. Therefore, FTC-NPs potentially could be a long-acting, stable formulation to ensure once-biweekly dosing to prevent or treat HIV infection.