Parametric Optimization of Cultural Conditions for Carboxymethyl Cellulase Production Using Pretreated Rice Straw by Bacillus sp. 313SI under Stationary and Shaking Conditions

Enhancement of cellulase production by cellulolytic bacteria SB125 in submerged fermentation medium and biochemical characterization of the enzyme

Microbial diversity from indigenous cultures has the potential to accelerate lignocellulose degradation through enzymes and make composting economically feasible. Therefore, this study is designed to boost cellulase output from a bacterial strain obtained from soil using a one-variable-at-a-time approach and response surface methodology. The bacteria recognized as Bacillus tequilensis (ON754229) produced the maximum cellulase at a temperature of 37 °C, pH -7.0, and incubation time of 72 h. A major contribution was anticipated by glucose (17 %) and ammonium sulfate (11 %) with cellulase activity of 0.56 U/mL in the optimized medium. The enzyme possessed activity of CMCase, FPase, and amylase of 0.589 μmol/min, 1.22 μmol/min, and 0.92 μmol/min respectively. SDS-PAGE showed a 65 kDa molecular weight of the enzyme capable of degrading cellulose, as confirmed by zymogram analysis. The enzyme showed relatively moderate thermo-stability towards neutral pH conditions possessing optimum conditions at pH 6.5 and temperature of 50 °C. The Km and Vmax values were 11.44 mM and 0.643 μmol/min respectively. The presence of MgSO4, ZnSO4, and Triton X- 100 increased the enzymatic reaction however AgNO3, EDTA, and HgCl2 altered the activation process. These results showed cellulase from B. tequilensis SB125 would be suitable for conventional industrial processes that convert biomass into biofuels.

Statistical optimization of cellulase production from Bacillus sp. YE16 isolated from yak dung of the Sikkim Himalayas for its application in bioethanol production using pretreated sugarcane bagasse

Cellulolytic bacteria were isolated from yak dung samples collected from different habitats of Sikkim, India. Isolate YE16 from the Yumthang Valley sample showed highest enzyme activity of 7.68 U/mL and was identified as Bacillus sp., which has a sequence similarity of 96.15% with B. velezensis. One factor at a time (OFAT) analysis revealed that an acidic pH of 5 with 37 °C temperature was optimum for maximum enzyme production after 36 hrs of incubation (13.88 U/mL), which was further increased after statistical optimization (34.70 U/mL). Media optimization based on response surface methodology predicted that Carboxymethyl cellulose (CMC) and MgSO4 at concentrations of 30 g/L and 0.525 g/L, respectively, at pH 5.5 to show CMCase activity of 30.612 U/mL, which was consistent with the observed value of 30.25 U/mL and confirmed the model. The crude enzyme also efficiently hydrolyzed alkaline pretreated sugarcane bagasse, releasing 7.09 g/L of glucose equivalent with an ethanol production of 3.05 g.

Production of Endoglucanases by Streptomyces thermocoprophilus CP1 using Rice Straw as a Substrate

Rice straw is a major agricultural waste that can be used as an alternative substrate to expensive raw materials for endoglucanases (CMCase) production by microorganisms. This study aimed to search for a microorganism having the potential to produce endoglucanase from rice straw. From compost samples, 40 bacterial colonies were isolated on carboxymethylcellulose (CMC) agar. Among them, 16 isolates showed a hydrolysis zone on a CMC agar plate with hydrolysis (HC) values ranging from 1.15±0.02 to 4.40±0.52. Based on hydrolysis zone diameter and HC value, isolates CP1, CP2 and CP3 were further examined for their CMCase production in CMC broth. According to CMCase production and stability, isolate CP1 was selected for further study. The optimal pH and temperature for CMCase production of isolate CP1 were 5 and 45 °C, respectively. When using pre-treated rice straw as a substrate for semi-solid-state fermentation, the highest CMCase activity of 0.142 ± 0.008 U/mL was obtained in a medium containing pre-treated rice straw of 60 g/L. The sequence alignment analysis and phylogenetic analysis suggested that the isolate CP1 was likely to be Streptomyces thermocoprophilus. The microorganism obtained from this study may be not only industrially important but also beneficial to the environment.

Bioprocess development for enhanced endoglucanase production by newly isolated bacteria, purification, characterization and in-vitro efficacy as anti-biofilm of Pseudomonas aeruginosa

Endoglucanase producing bacteria were isolated from Egyptian soils and the most active bacterial strain was identified as Bacillus subtilis strain Fatma/1. Plackett-Burman statistical design was carried out to assess the effect of seven process variables on endoglucanase production. Carboxymethyl cellulose (CMC), yeast extract and peptone were the most significant variables that enhanced the endoglucanase production and thus were selected for further optimization using face-centered central composite design. The highest yield of endoglucanase (32.37 U/mL) was obtained in run no. 9, using 18 g/L CMC, 8 g/L peptone, 7 g/L yeast extract and 0.1 g/L FeSO₄.7H₂O. The optimized medium showed about eightfold increase in endoglucanase production compared to the unoptimized medium. The produced crude enzyme was further purified by ammonium sulfate precipitation, then DEAE-Sepharose CL6B column. The purified enzyme was shown to have a molecular weight of 37 kDa. The enzyme showed maximum activity at pH 8.0, temperature of 50 °C, incubation time of 60 min. The half-life time (T_1/2) was 139.53 min at 50 °C, while being 82.67 min at 60 °C. Endoglucanase at concentration of 12 U/mL effectively removed 84.61% of biofilm matrix of Pseudomonas aeruginosa with marked reduction in carbohydrate content of the biofilm from 63.4 to 7.9 μg.

Alleviating product inhibition of Trichoderma reesei cellulase complex with a product-activated mushroom endoglucanase

Product inhibition of cellulase is a challenging issue in industrial processes. Here, we introduced a product-activated mushroom cellulase, PaCel3A from Polyporus arcularius, into Trichoderma reesei. The filter paper activity, carboxymethyl cellulase activity, and saccharification efficiency (substrate: pretreated rice straw, PRS) of transformants increased significantly with this enzyme (by 18.4-26.8%, 13.8-22.8%, and 17.0%, respectively). A mutant of PaCel3A, PaCel3AM, obtained based on B-factor analysis, saturated mutagenesis, and residual activity assay, showed improved thermostability. The PRS saccharification efficiency using the cellulase complex from T. reesei transformants overexpressing pacel3am increased by 56.4%-63.0%. In addition, the T. reesei cellulase complex obtained by adding the purified recombinant PaCel3AM from T. reesei (rCel3aM-tr) to hydrolyze PRS resulted in increased reducing sugar yields at all sampling points, outperforming the cellulase complexes without rCel3aM-tr. These results suggest that introducing product-activated cellulase genes is a simple and feasible method to alleviate the product inhibition of cellulase.

Production, purification and characterization of an acid/alkali and thermo tolerant cellulase from Schizophyllum commune NAIMCC-F-03379 and its application in hydrolysis of lignocellulosic wastes

A cellulase producing fungus Schizophyllum commune NAIMCC-F-03379 was isolated from decomposed leaf sample of Lantana camera. The nutritional components (wheat bran, magnesium sulphate and calcium chloride concentrations) and physical parameters (temperature and pH) were optimised by response surface methodology for enhanced cellulase production by S. commune NAIMCC-F-03379. The optimized medium contained: 1% (w/v) wheat bran, 0.3 g/L MgSO_4, 0.8–1.0 g/L CaCl₂, optimum temperature and pH were 25 °C and 5 respectively. Under optimum condition, 5.35-fold increase in CMCase and 6.62-fold increase in FPase activity was obtained as compared to un-optimized condition. Crude cellulase enzyme was subjected to different purification techniques and comparative evaluation of their efficiency was performed. The aqueous two-phase system using polyethylene glycol 8000/MnSO₄ system showed maximum purification with 10.4-fold increase in activity, 79.5% yield and 0.5 partition coefficient. The cellulase enzyme obtained from S. commune NAIMCC-F-03379 has shown high stability i.e. more than 55% relative activity after 12 h of incubation over wide range of temperature (25–65 °C) and pH (3–10). The molecular weight of the cellulase enzyme was estimated as ~ 60 kDa by using sodium dodecyl sulphate-polyacrylamide electrophoresis (SDS-PAGE) and zymography. K_m and V_max value of cellulase on carboxy-methyl cellulose were obtained as 0.0909 mg/mL and 45.45 μmol/min mg respectively. Rice straw and wheat bran were subjected to hydrolysis using cellulase and cellulase–xylanase cocktail and analysed by thin layer chromatography and high performance liquid chromatography (HPLC). The HPLC analysis showed glucose concentration of 1.162 mg/mL after enzymatic hydrolysis of rice straw.

Genomically Defined Paenibacillus polymyxa ND24 for Efficient Cellulase Production Utilizing Sugarcane Bagasse as a Substrate

Cellulolytic bacteria from cattle rumen with ability to hydrolyze cellulose rich biomass were explored. The study selected Paenibacillus polymyxa ND24 from 847 isolates as the most potent strain, which can efficiently produce cellulase by utilizing sugarcane bagasse, rice straw, corn starch, CMC, and avicel as a sole carbon source. On annotation of P. polymyxa ND24 genome, 116 members of glycoside hydrolase (GH) family from CAZy clusters were identified and the presence of 10 potential cellulases was validated using protein folding information. Cellulase production was further demonstrated at lab-scale 5-L bioreactor exhibiting maximum endoglucanase activity up to 0.72 U/mL when cultivated in the medium containing bagasse (2% w/v) after 72 h. The bagasse hydrolysate so produced was further utilized for efficient biogas production. The presence of diverse hydrolytic enzymes and formidable cellulase activity supports the use of P. polymyxa ND24 for cost-effective bioprocessing of cellulosic biomass.

Augmented cellulase production by Bacillus subtilis strain MU S1 using different statistical experimental designs

The production of cellulase by Bacillus subtilis MU S1, a strain isolated from Eravikulam National Park, was optimized using one-factor-at-a-time (OFAT) and statistical methods. Physical parameters like incubation temperature and agitation speed were optimized using OFAT and found to be 40 °C and 150 rpm, respectively, whereas, medium was optimized by statistical tools. Plackett-Burman design (PBD) was employed to screen the significant variables that highly influence cellulase production. The design showed carboxymethyl cellulose (CMC), yeast extract, NaCl, pH, MgSO4 and NaNO3 as the most significant components that affect cellulase production. Among these CMC, yeast extract, NaCl and pH showed positive effect whereas MgSO4 and NaNO3 were found to be significant at their lower levels. The optimum levels of the components that positively affect enzyme production were determined using response surface methodology (RSM) based on central composite design (CCD). Three factors namely CMC, yeast extract and NaCl were studied at five levels whilst pH of the medium was kept constant at 7. The optimal levels of the components were CMC (13.46 g/l), yeast extract (8.38 g/l) and NaCl (6.31 g/l) at pH 7. The maximum cellulase activity in optimized medium was 566.66 U/ml which was close to the predicted activity of 541.05 U/ml. Optimization of physical parameters and medium components showed an overall 3.2-fold increase in activity compared to unoptimized condition (179.06 U/ml).

Bioethanol production with carboxymethylcellulase of Pseudomonas poae using castor bean (Ricinus communis L.) cake

Increased consumption of fossil fuels is an emerging problem. Scientists look for the existence of other alternatives to fossil fuels, including so-called renewable energy. Accordingly, we report the production of bio-ethanol from the remnants of castor oil bean seed cake (CBC) by the carboxymethylcellulase enzyme (CMCase). A bacterial strain isolated from rice straw showing higher CMCase activity was identified. The 16S rRNA result showed a 93% homology with the 16SrRNA gene sequences of Pseudomonas poae RE∗1-1-14, the strain was identified as Pseudomonas poae AB3. In addition, our results showed that the highest enzyme activity was achieved after 48 h and inoculum size of 3.7 × 10⁵ CFU. The optimum temperature, pH and Carboxymethylcellulose (CMC) concentration for the highest enzyme activity was 25 °C, pH 7 and 10 g/l respectively. Furthermore, The CMCase was purified by ammonium sulphate at a concentration of 60%. The SDS-PAGE of the purified enzyme showed a molecular weight of 88 kDa. Additionally, the (CBC) was hydrolyzed by the purified CMCase at the enzyme optimum conditions. The results showed the liberation of 5.2 g/L of reducing sugar by using dinitrosalicylic acid (DNS) assay. Finally, the total sugar produces 35 g/L after 48 h when Saccharomyces cerevisiae was used as a fermentation agent. Hence for the first time, we have been successfully able to produce bioethanol from CBC with CMCase of Pseudomonas poae.

Enzymatic saccharification of pretreated rice straw by cellulases from Aspergillus niger BK01

Alkali-assisted acid pretreated rice straw was saccharified using cellulase from Aspergillus niger BK01. The cellulase production by the fungus was enhanced by parametric optimization using solid-state fermentation conditions. Maximum cellulase production (12.0 U/gds of carboxymethyl cellulase, CMCase) was achieved in 96 h, using 6.0% substrate concentration, 7.5% inoculum concentration, 1:2 solid to liquid ratio, at pH 5.5, and temperature 28 °C, by supplementation of the fermentation medium with 0.1% carboxymethylcellulose and 0.1% ammonium nitrate. Characterization of crude cellulases showed that highest CMCase activity was observed at pH 4.8 and temperature 40 °C. The CMCase was stable from pH 4.8-5.5 and at a temperature range of 35-50 °C. The pretreated biomass was subjected to hydrolysis with the fungal cellulases. The saccharification optimization studies showed that 2% (v/v) enzyme concentration and hydrolysis time of 2.5 h were optimum for maximum yield, i.e, 23.78% sugars and 35.96% saccharification value.

Optimization of cellulase production by Enhydrobacter sp. ACCA2 and its application in biomass saccharification

Cellulase finds use in saccharification of lignocellulosic agroresidues to fermentable sugars which can be used for production of commercially important metabolites. This study reports endoglucanase (CMCase) production by Enhydrobacter sp. ACCA2. The CMCase activity of the strain ACCA2 was successively improved by optimization of range of physical and nutritional parameter in a set of non-statistical and statistical experiments. Initial non-statistical selection of carbon source, incubation time, temperature and pH resulted in 1.07 fold increase of CMCase activity. In a subsequent statistical method, response surface methodology, optimization of medium components such as carboxymethylcellulose, peptone, NaCl, MgSO4, K2HPO4, and (NH4)2SO4 yielded further increase up to 2.39 fold CMCase activity. The cellulolytic potential was evaluated in biomass saccharification with different plant materials and the results revealed that the enzyme produced by strain may have significant commercial values for industrial saccharification process. Moreover, this is the first report of cellulase production by an Enhydrobacter spp.