Photocatalytic Degradation Studies of Organic Dyes over Novel Cu/Ni Loaded Reduced Graphene Oxide Hybrid Nanocomposite: Adsorption, Kinetics and Thermodynamic Studies

Nowadays, for environmental remediation, photocatalytic process involving graphene-based semiconductors is considered a very promising oxidation process for water treatment. In the present study, nanocomposite (Cu/Ni/rGO) has been synthesized by Dypsis lutescens leaf extract. Characterization of the sample was carried out by UV-visible spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray (EDX) analysis, Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). Different parameters like contact time, nanocatalyst amount, dye concentration, effect of temperature. and pH factor were optimized to examine the maximum removal efficiency for dyes rhodamine B and alizarine R with and without visible light source. In both cases, i.e., with or without light, maximum removal was observed at 20 mg of nanocatalyst for 5 ppm concentration of both dyes at 45 °C temperature and pH 10 for rhodamine B and pH 4 for alizarine R, respectively with a 20 min contact time. Maximum removal of dyes 93% rhodamine B and 91% alizarine R were observed under a tungsten lamp as compared to without a tungsten lamp, i.e., 78% of RhB and 75% of AR from mixture solution of these dyes. To assess the rate of reaction, spontaneity, and nature of reaction thermodynamics, kinetics and adsorption isotherms were studied. Thermodynamic values indicated that both dyes depicted endothermic and spontaneous degradation processes. Isotherm data fitted best to a Freundlich isotherm, while results of kinetic studies of both dyes followed the pseudo 2nd order kinetic equation. In the end, scavenging radical studies concluded that hydroxyl radicals were the main active specie involved in the photocatalytic degradation process, and regeneration experiments resulted that Cu/Ni/rGO nanocomposites were re-utilized for about four times.

Arsenic and fluoride co-contamination in shallow aquifers from agricultural suburbs and an industrial area of Punjab, Pakistan: Spatial trends, sources and human health implications

Release of arsenic (As) and fluoride (F^-) species into groundwater is a serious health concern around the world. The present study was the first systematic baseline study conducted in Rahim Yar Khan district, Punjab, focusing on As and F^- contamination in groundwater. A total of 51 representative groundwater samples comprising of 44 samples from agricultural suburbs and 7 from an industrial base were analysed. Statistical parameters, principal component analysis-multiple linear regression (PCA-MLR) and health risk assessment model were used to investigate the hydro geochemistry, spatial patterns, interrelation, source contribution and associated health risks of high As and F^- in groundwater of the study area. Results showed high risk of F^- exposure to people of the study area, with all samples exceeding the WHO standard of 1.5 mg/L, and for As, 32.5% of the studied groundwater samples exceeded the WHO standard (10 µg/L). The maximum As (107.23 µg/L) and F^- (26.4 mg/L) levels were observed in samples close to the agricultural and smelting areas, implicating the frequent use of fertilizers and influence of industrial effluents in the study area. The PCA-MLR receptor model quantitatively illustrates that the majority of As and F^- comes from natural sources, while, among anthropogenic sources, industrial and agricultural activities contributed the most. Health risk assessment revealed a high risk of As and F^- contamination to the exposed population; therefore, detailed control strategies and policies are required in order to mitigate the health risks.