The Effect of the Microstructure and Viscosity of Modified Bitumen on the Strength of Asphalt Concrete

The purpose of these studies was to establish the influence of the microstructural and rheological characteristics of modified bitumen compositions on the strength indicators of asphalt concrete. The effect of additives concentration on the rheological characteristics and microstructure of binary "bitumen-surfactant", "bitumen-AG-4I", and ternary "bitumen-AG-4I-AG-4I" systems has been studied. To assess the effect of bitumen dispersion on the physical and mechanical characteristics of modified asphalt concrete samples, the compressive strength value was determined. The following chemicals have been used as additives: the original product AS-1, industrial additive AMDOR-10, and used sealant AG-4I, a product based on polyisobutylene and petroleum oils. At an increased content of AG-4I (C ≥ 1.0 g/dm3) in ternary systems, the contribution of the emerging intermolecular polyisobutylene network to the development of structuring processes increases while the viscous effect of the surfactant AS-1 decreases. It has been established that the minimum size of bee-like bitumen structures (1.66 µm) is recorded with the joint presence of additives in the bitumen, AS-1 at a level of 1.0 g/dm3 and AG-4I at a level of 1.0 g/dm3. Under the same concentration regimes of the ternary bitumen composition, the maximum increase in compressive strength RD was achieved with the smallest size of bee-like structures of modified bitumen.

Asphaltenes: Aggregates in Terms of A1 and A2 or Island and Archipielago Structures

In this work several issues related to asphaltenes and asphaltene aggregates such as isolation of real asphaltene molecules and comparison of these with average structures obtained using regular analytics laboratory techniques are presented. Several molecular organic models were used to simulate asphaltene in solution and aggregates formation in the two solvents toluene and THF employed. The results, obtained from simulation calculations using molecular dynamics were compared with experimental chromatography results obtained using the micro gel permeation chromatography (μGPC), inductively coupled plasma (ICP) mass spectra (MS) combined technique (GPC ICP MS for short). In this case reasonable hydrodynamic ratios and size distribution were obtained for asphaltenes and their corresponding subfractions A1 and subfraction A2. Comparison between experimental sample profiles, transmission of electron microscopy (TEM) data, and molecular dynamics allows for estimation of hydrodynamic ratios of around 8 nm. Highly aromatic and island type molecular model A30 and continental type molecular model A40 were employed in the molecular dynamics to built colloids. In this case open-like colloids (A40) and compact-like colloids A30 were obtained. Subjects such as trapped compounds (TC), metallic porphyrins, and colloidal dipole moments were also studied. Studies of the adsorption behavior of asphaltenes on several macroscopic and nanoscopic surfaces are presented and show the tendency of the asphaltene to adsorb in aggregate form.

Mechanistic Approach to Thermal Production of New Materials from Asphaltenes of Castilla Crude Oil

Asphaltenes are compounds present in crude oils that influence their rheology, raising problems related to the extraction, transport, and refining. This work centered on the chemical and structural changes of the asphaltenes from the heavy Colombian Castilla crude oil during pyrolysis between 330 and 450 °C. Also, the development of new strategies to apply these macromolecules, and the possible use of the cracking products as a source of new materials were analyzed. The obtained products (coke, liquid, and gas) were collected and evaluated through the techniques of proton and carbon-13 nuclear magnetic resonance (1H and 13C NMR), elemental composition, Fourier-transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), saturates, aromatics, resins, and asphaltenes (SARA) analysis, and gas chromatography–mass spectrometry (GC-MS). A comparison of the applied methods showed that the asphaltene molecules increased the average size of their aromatic sheets, lost their aliphatic chains, condensed their aromatic groups, and increased their degree of unsaturation during pyrolysis. In the liquid products were identified alkylbenzenes, n-alkanes C9–C30, and n-alkenes. Moreover, the gaseous products included methane, ethane, propane, and pentane. An approach of the structural chain reaction was used to define the possible asphaltenes chemical structures before and after pyrolysis. In conclusion, this type of thermal process can be used as an easy route to attain new materials associated with specific structural units from the asphaltenes.