Advances in micro interfacial phenomena of adsorptive micellar flocculation: Principles and application for water treatment

Among various aqua remediation technologies, separation aims at cleaning pollutants by isolating them despite their destruction; solutes can also be recovered after the process. Adsorptive micellar flocculation (AMF) has been known as an important surfactant-based technique to separate poorly water-soluble hazardous pollutants from aqua media as an efficient and energy-intensive replacement for other surfactant-based techniques, as such AMF should be known. AMF is based on the partitioning of solutes gradient from bulk solution into the nanosized smart anionic surfactant micelle followed by flocculation. However, unlike coagulation/flocculation or adsorption, AMF is not viable for the production of drinking water in water utilities due to the loss of surfactant monomers. Unfortunately, it can be used as a reservoir or for the recycling/recovery of organic pollutants (intermediates) (ions, organics/bioactive, dyes, etc.), even at high concentrations. The performance of AMF depends on various parameters, and this review briefly summarizes the existing researches on different pollutants removal by AMF and material recovery/recycling. This includes operating condition factors (surfactants, flocculants, surfactant-flocculant or surfactant-pollutant concentration ratio, and water conditions chemistry). Because varieties of micro interfacial phenomena other than physical interactions occur in a versatile micellar environment in the AMF process, emphases are given to adsorptive oxidation, micellar catalysis, selectivity. Furthermore, for the first time, this review gives an overview of understanding the state-of-the-art multifunctional nano amphiphile-based AMF that behaves mimetic to aquatic organisms in the process of pollutant removal. The efficiency of AMF, including recycling concentrated solution without noticeable deterioration, as an auxiliary resource/income for the next cycle, signifies economic viability, versatility, and manifold applications in aqua remediation. Significance, ways to achieve enhanced process efficiency, as well as challenges and future opportunities in wastewater treatment, are also highlighted.

Adsorption of phosphorus by using magnetic Mg-Al-, Zn-Al- and Mg-Fe-layered double hydroxides: comparison studies and adsorption mechanism

Mg-Al, Zn-Al and Mg-Fe magnetic layered double hydroxide (LDH) adsorbents were synthesized. The adsorption effect and influencing factors of these adsorbents were explored, and the adsorption mechanism of phosphorus was studied with advanced instruments. The results showed that the best adsorption performance was observed when the molar ratio of metals was 3 for the magnetic LDH adsorbents, and the maximum adsorption amount for phosphorus was 74.8, 80.8 and 67.8 mg/g for Mg-Al, Zn-Al and Mg-Fe LDHs, respectively. Pseudo-second-order kinetics could be used to describe the adsorption process of phosphorus onto the magnetic LDHs. The adsorption of phosphorus onto the magnetic LDHs was an exothermic process. Lower temperatures were favourable for adsorption, and the adsorption of phosphorus onto the magnetic LDHs was a spontaneous process. When the solid-liquid ratios were 0.10 g/L, 0.10 g/L and 0.05 g/L for Mg-Al, Zn-Al and Mg-Fe magnetic LDHs, respectively, the highest adsorption amount of phosphorus was achieved for each magnetic LDH. The maximum adsorption amount was observed at pH values of 6.0-8.0. The inhibitory effect of HCO₃^- on the adsorption capacity of phosphorus onto the magnetic LDHs was the strongest at a higher HCO₃^- concentration level. The relative content of -OH significantly reduced after adsorption of phosphorus by the FTIR analysis, which indicated that the mechanism of phosphorus removal was mainly through the exchange between hydroxyl on the adsorbent surface and phosphorus in water. XPS studies showed that oxygen provided electrons during the adsorption of phosphorus.