Biomaterial-Derived Calcium Carbonate Nanoparticles for Enteric Drug Delivery

Synthesis of eco-friendly CaCO3@Zn-Al MMO core-shell nanoflowers photocatalyst using bio-eggshell waste for improved photocatalytic degradation of RhB under visible light irradiation

In this study, a type-I heterojunction was synthesized based on eggshell waste doped mixed metal oxide (ES@ZnAl MMO) for the degradation of RhB dye under visible light irradiation. The ES@ZnAl MMO core-shell was synthesized using waste eggshell and layered double hydroxide (LDH) as primary precursors. After their mechanochemical assembly and thermal treatment, CaCO3 was formed in both calcite and vaterite forms, alongside mixed metal oxides derived from the LDH (ZnO and Al2O3). The formation of a heterojunction between the semiconductors results in an improved activation of sites, a decrease in bandgap energy from 5.72 to 3.44 eV, and an increase in degradation capacity. The elemental composition, morphology, structural, and optical properties of the ES@ZnAl MMO nanocomposite were analyzed using various techniques. The optimal ES@ZnAl MMO photocatalyst demonstrated superior performance, reaching over 98% of RhB dye degradation under optimal conditions, outperforming pure ZnAl LDH, ZnAl MMO, and ES. After five run cycles, the ES@ZnAl MMO heterojunction still maintained a high photocatalytic performance for RhB dye (99%). Furthermore, it displayed high performance in degrading various other pollutants, including OG, IC, MB, and 2.4-DP, with degradation efficiencies of 97%, 99%, 99%, and 87%, respectively. This economically advantageous heterojunction showed its importance in environmental remediation, presenting a promising solution for addressing diverse pollution challenges.

Synthesis and characterization of bio-nanocomposite based on chitosan and CaCO3 nanoparticles for heavy metals removal

Water is a vital component of life; therefore, it is critical to have access to pure water for various life-sustaining activities including agriculture and human consumption. An eco-friendly nanocomposite based on chitosan (Cs) and nanomaterials (CaCO3-NPs) were combined to amalgamate the advantages of biopolymers and nanomaterials to overcome the problems of instability, poor mechanical properties, and low removal percentage of biopolymers. The as-prepared samples were characterized and were used for the removal of heavy metal from wastewater. X-ray diffractometer, Fourier transform infrared spectroscopy, and transmission electron microscope were used to distinguish the prepared absorbents. The absorption of the heavy metals by as-prepared samples was examined at different conditions. The kinetic and isotherm models of the adsorption process were also studied. The data showed that the removal percentages of Cd, Cu, Pb, Zn, Cr and Ni by the composite were 98.0, 94.8, 99.0, 97.9, 97.4 and 98.3 %, respectively. The kinetic and isothermal studies showed that the absorption of these metal ions by the samples obeyed a pseudo-second-order mechanism and Langmuir isotherm model, respectively. In addition, the maximum adsorption capacities of Cd, Cu, Pb, Zn, Cr, and Ni ions by as-prepared nanocomposite were 83.33, 47.84, 98.03, 89.28, 62.11, and 63.69 mg/g, respectively.

Regenerative marine waste towards CaCO3 nanoformulation for Alzheimer's therapy

Alzheimer's disorder (AD) is associated with behavioural and cognitive destruction with due respect to the neurological degeneration. Conventional therapeutic approach for treatment of AD using neuroprotective drugs suffered certain limitations such as poor solubility, insufficient bioavailability, adverse side effects at higher dose and ineffective permeability on blood brain barrier (BBB). Development of nanomaterial based drug delivery system helped to overcome these barriers. Hence the present work focused on encapsulating neuroprotective drug citronellyl acetate within CaCO₃ nanoparticles to develop neuroprotective CaCO₃ nanoformulation (CA@CaCO₃ NFs). CaCO₃ was derived from marine conch shell waste, while the neuroprotective drug citronellyl acetate was scrutinized by in-silico high throughput screening. In-vitro findings revealed that CA@CaCO₃ nanoformulation exhibited enhanced free radical scavenging activity of 92% (IC₅₀ value - 29.27 ± 2.6 μg/ml), AChE inhibition of 95% (IC₅₀ value - 25.6292 ± 1.5 μg/ml) at its maximum dose (100 μg/ml). CA@CaCO₃ NFs attenuated the aggregation of β-amyloid peptide (Aβ) and also disaggregated the preformed mature plaques the major risk factor for AD. Overall, the present study reveals that CaCO₃ nanoformulations exhibits potent neuroprotective potential when compared to the CaCO₃ nanoparticles alone and citronellyl acetate alone due to the sustained drug release and synergistic effect of CaCO₃ nanoparticles and citronellyl acetate depicting the fact that CaCO₃ can act as promising drug delivery system for treatment of neurodegenerative and CNS related disorders.

Recent advances in adhesive materials used in the biomedical field: adhesive properties, mechanism, and applications

Adhesive materials are natural or synthetic polymers with the ability to adhere to the surface of luminal mucus or epithelial cells. They are widely used in the biomedical field due to their unique adhesion, biocompatibility, and excellent surface properties. When used in the human body, they can adhere to an accessible target and remain at the focal site for a longer period, improving the therapeutic effect on local disease. An adhesive material with bacteriostatic properties can play an antibacterial role at the focal site and the adhesive properties of the material can prevent the focal site from being infected by bacteria for a period. In addition, some adhesive materials can promote cell growth and tissue repair. In this review, the properties and mechanism of natural adhesive materials, organic adhesive materials, composite adhesive materials, and underwater adhesive materials have been introduced systematically. The applications of these adhesive materials in drug delivery, antibacterials, tissue repair, and other applications are described in detail. Finally, we have discussed the prospects and challenges of using adhesive materials in the field of biomedicine.

XRD and cytotoxicity assay of submitted nanomaterial industrial samples in the Philippines

Distinct properties that nanomaterials possess compared to their bulk counterparts are attributed to their characteristic high surface area to volume ratios, and the prevalence of structure and shape effects at the nanoscale. However, these interesting properties are also accompanied by health hazards that are not seen in bulk materials. In the context of Philippine research and industry, the issue of nanosafety and the creation of nanotechnology guidelines have long been overlooked. This is of particular importance considering that nanotechnology research in the Philippines leans heavily towards medicinal and agricultural applications. In this study, nanomaterial samples from the industry submitted through the Philippine Industrial Technology Development Institute (ITDI) were analyzed using XRD and MTT cytotoxicity assay. XRD results show significant band broadening in the diffraction patterns of halloysite nanoclay, bentonite nanoparticles, silver nanoparticles, and CaCO3 nanoparticles, indicating that samples were in the nanometer range. The diffraction pattern of TiO2, however, did not exhibit band broadening, which may be due to the tendency of TiO2 nanoparticles to aggregate. Submitted samples were also assessed for their effect on cell viability using MTT cytotoxicity assay. Among these samples, only silver nanoparticles exhibited cytotoxicity to the AA8 cell line.

Microbial-induced calcium carbonate precipitation: Influencing factors, nucleation pathways, and application in waste water remediation

Microbial-induced calcium carbonate precipitation (MICP) is a technique that uses the metabolic action of microorganisms to produce CO₃^2- which combines with free Ca²⁺ to form CaCO₃ precipitation. It has gained widespread attention in water treatment, aimed with the advantages of simultaneous removal of multiple pollutants, environmental protection, and ecological sustainability. This article reviewed the mechanism of MICP at both intra- and extra-cellular levels. It summarized the parameters affecting the MICP process in terms of bacterial concentration, ambient temperature, etc. The current status of MICP application in practical engineering is discussed. Based on this, the current technical difficulties faced in the use of MICP technology were outlined, and future research directions for MICP technology were highlighted. This review helps to improve the design of existing water treatment facilities for the simultaneous removal of multiple pollutants using the MICP and provides theoretical reference and innovative thinking for related research.

Next-Generation Colloidal Materials for Ultrasound Imaging Applications

Ultrasound has important applications, predominantly in the field of diagnostic imaging. Presently, colloidal systems such as microbubbles, phase-change emulsion droplets and particle systems with acoustic properties and multiresponsiveness are being developed to address typical issues faced when using commercial ultrasound contrast agents, and to extend the utility of such systems to targeted drug delivery and multimodal imaging. Current technologies and increasing research data on the chemistry, physics and materials science of new colloidal systems are also leading to the development of more complex, novel and application-specific colloidal assemblies with ultrasound contrast enhancement and other properties, which could be beneficial for multiple biomedical applications, especially imaging-guided treatments. In this article, we review recent developments in new colloids with applications that use ultrasound contrast enhancement. This work also highlights the emergence of colloidal materials fabricated from or modified with biologically derived and bio-inspired materials, particularly in the form of biopolymers and biomembranes. Challenges, limitations, potential developments and future directions of these next-generation colloidal systems are also presented and discussed.

Tuning polymorphs of precipitated calcium carbonate from discarded eggshells: effects of polyelectrolyte and salt concentration

Biowaste eggshells are a valuable source of calcium carbonate suitable for various applications. In this study, spherical vaterite and calcite calcium carbonate polymorphs have been synthesised from discarded eggshells by the precipitation technique at ambient temperature. The influence of initial salt concentration with different polyelectrolytes such as ethylene glycol (EG), polyethylene glycol (PEG, 600 and 6000), and poly(sodium 4-styrenesulfonate) (PSS) at various w/v% concentrations on the polymorph crystal formation of precipitated calcium carbonate (PCC) particles was studied. The results indicated that PCC crystals with spherical, star-shaped and yarn shaped morphologies can be obtained based on the concentration of calcium ions and the presence of different polyelectrolyte solution. At low salt molar concentration, PEG-6000 and PSS polyelectrolytes were found to promote the formation of spherical vaterite calcium carbonate particles with particle mean diameters of 5.05 μm and 2.17 μm, respectively. Furthermore, silver nanoparticles were also loaded into the PCC particles in situ, and the surface area significantly increased from 2.2813 m2 g-1 in untreated ground eggshells to 30.4632 m2 g-1 in PCC particles in the presence of PSS and silver colloid solution. The EDS mapping revealed the average wt% of silver atoms loaded in PCC particles in the presence of PSS polyelectrolyte was lower (1.44 wt%) than in the presence of PEG-6000 (4.27 wt%) due to the silver encapsulation possibility during the core-shell formation, as confirmed by SEM images. The silver nanoparticle-loaded PCC particles in this study can be incorporated into the polymer matrix and employed for antimicrobial food packaging or wound dressing application.

Hard, Soft, and Hard-and-Soft Drug Delivery Carriers Based on CaCO3 and Alginate Biomaterials: Synthesis, Properties, Pharmaceutical Applications

Because free therapeutic drug molecules often have adverse effects on normal tissues, deliver scanty drug concentrations and exhibit a potentially low efficacy at pathological sites, various drug carriers have been developed for preclinical and clinical trials. Their physicochemical and toxicological properties are the subject of extensive research. Inorganic calcium carbonate particles are promising candidates as drug delivery carriers owning to their hardness, porous internal structure, high surface area, distinctive pH-sensitivity, low degradability, etc, while soft organic alginate hydrogels are also widely used because of their special advantages such as a high hydration, bio-adhesiveness, and non-antigenicity. Here, we review these two distinct substances as well as hybrid structures encompassing both types of carriers. Methods of their synthesis, fundamental properties and mechanisms of formation, and their respective applications are described. Furthermore, we summarize and compare similarities versus differences taking into account unique advantages and disadvantages of these drug delivery carriers. Moreover, rational combination of both carrier types due to their performance complementarity (yin-&yang properties: in general, yin is referred to for definiteness as hard, and yang is broadly taken as soft) is proposed to be used in the so-called hybrid carriers endowing them with even more advanced properties envisioned to be attractive for designing new drug delivery systems.

Avian Egg: A Multifaceted Biomaterial for Tissue Engineering

Most components in avian eggs, offering a natural and environmentally friendly source of raw materials, hold great potential in tissue engineering. An avian egg consists of several beneficial elements: the protective eggshell, the eggshell membrane, the egg white (albumen), and the egg yolk (vitellus). The eggshell is mostly composed of calcium carbonate and has intrinsic biological properties that stimulate bone repair. It is a suitable precursor for the synthesis of hydroxyapatite and calcium phosphate, which are particularly relevant for bone tissue engineering. The eggshell membrane is a thin protein-based layer with a fibrous structure and is constituted of several valuable biopolymers, such as collagen and hyaluronic acid, that are also found in the human extracellular matrix. As a result, the eggshell membrane has found several applications in skin tissue repair and regeneration. The egg white is a protein-rich material that is under investigation for the design of functional protein-based hydrogel scaffolds. The egg yolk, mostly composed of lipids but also diverse essential nutrients (e.g., proteins, minerals, vitamins), has potential applications in wound healing and bone tissue engineering. This review summarizes the advantages and status of each egg component in tissue engineering and regenerative medicine, but also covers their current limitations and future perspectives.

Calcium carbonate nano- and microparticles: synthesis methods and biological applications

Calcium carbonate micro- and nanoparticles are considered as chemically inert materials. Therefore, they are widely considered in the field of biosensing, drug delivery, and as filler material in plastic, paper, paint, sealant, and adhesive industries. The unusual properties of calcium carbonate-based nanomaterials, such as biocompatibility, high surface-to-volume ratio, robust nature, easy synthesis, and surface functionalization, and ability to exist in a variety of morphologies and polymorphs, make them an ideal candidate for both industrial and biomedical applications. Significant research efforts have been devoted for developing novel synthesis methods of calcium carbonate particles in micrometer and nanometer dimensions. This review highlights different approaches of the synthesis of calcium carbonate micro- and nanoparticles, such as precipitation, slow carbonation, emulsion, polymer-mediated method, including in-situ polymerization, mechano-chemical, microwave-assisted method, and biological methods. The applications of these versatile calcium carbonate micro- and nanoparticles in the biomedical field (such as in drug delivery, therapeutics, tissue engineering, antimicrobial activity, biosensing applications), in industries, and environmental sector has also been comprehensively covered.

Novel Drug Carrier: 5-Fluorouracil Formulation in Nanoporous Biogenic Mg-calcite from Blue Crab Shells-Proof of Concept

The ever-growing demand for novel, cheaper, and more effective drugs has put nanomedicine and targeted drug delivery to the forefront of scientific innovation. Owing to its porous three-dimensional (3D)-nanostructure and properties, the biogenic calcite from wasted blue crab shells is employed in the present work as a new drug carrier for 5-fluorouracil (5-FU), a drug widely used in cancer therapy. The drug solution has been loaded in the porous nanoarchitecture of the powdered biogenic material and further pelleted in tablets with a 5-FU concentration of 1.748 mg/g. Their structural and morphological properties were characterized using Raman, X-ray diffraction, and scanning electron microscopy. Confocal micro-Raman spectra of tablet surface showed a typical signal of biogenic carbonate with preserved carotenoids and carotenoproteins found in the native waste shell, while the drug Raman signal was absent, indicating its adsorption in the intricate nanoporous biogenic carrier. The slow release of the drug from the newly formulated tablet was investigated by tracking the surface-enhanced Raman scattering (SERS) signal of the tablet solution in a series of time-dependent experiments. The SERS signal quantification is achieved using the well-known SERS spectral fingerprint of 5-fluorouracil aqueous solution adsorbed on Ag nanoparticles. The proof of concept is demonstrated by quantifying the slow release of the drug through the characteristic SERS band intensity of 5-FU in a time course of 26 h. This proof of concept boosted further investigations concerning the released drug identity in simulated solutions that mimic the pH of the upper- and lower gastrointestinal tract, as well as the multiple possibilities to control porosity and composition during powdering and treatment of biogenic material, to achieve the most convenient formulation for relevant biomedical drug delivery. Nonetheless, the present results showed great promise for innovative reusing waste biogenic 3D-nanomaterials of aquatic origin as advantageous drug carriers for slow release purposes, in line with the concept of blue bioeconomy.

Extraction of Value-Added Minerals from Various Agricultural, Industrial and Domestic Wastes

Environmental pollution is one of the major concerns throughout the world. The rise of industrialization has increased the generation of waste materials, causing environmental degradation and threat to the health of living beings. To overcome this problem and effectively handle waste materials, proper management skills are required. Waste as a whole is not only waste, but it also holds various valuable materials that can be used again. Such useful materials or elements need to be segregated and recovered using sustainable recovery methods. Agricultural waste, industrial waste, and household waste have the potential to generate different value-added products. More specifically, the industrial waste like fly ash, gypsum waste, and red mud can be used for the recovery of alumina, silica, and zeolites. While agricultural waste like rice husks, sugarcane bagasse, and coconut shells can be used for recovery of silica, calcium, and carbon materials. In addition, domestic waste like incense stick ash and eggshell waste that is rich in calcium can be used for the recovery of calcium-related products. In agricultural, industrial, and domestic sectors, several raw materials are used; therefore, it is of high economic interest to recover valuable minerals and to process them and convert them into merchandisable products. This will not only decrease environmental pollution, it will also provide an environmentally friendly and cost-effective approach for materials synthesis. These value-added materials can be used for medicine, cosmetics, electronics, catalysis, and environmental cleanup.

Bivalve shells (Corbula trigona) as a new adsorbent for the defluoridation of groundwater by adsorption-precipitation

Defluoridation of groundwater was performed in a batch reactor using bivalve shell powder (BSP) as adsorbent. The physicochemical characteristics of BSP, studied by Fourier Transform Infrared, X-ray Diffraction and Inductively Coupled Plasma-Optical Emission Spectrometry after dissolution, have shown that BSP was mainly composed of crystalline CaCO₃ (∼97.8%). The effects of pH, initial fluoride concentration, adsorbent dose and contact time on the adsorption capacity of BSP were investigated. For an initial fluoride concentration of 2.2 mg/L and with 16 g/L of BSP, after 8 hours of treatment, 27.3% were eliminated at pH 7.5 versus 68% at pH 3, highlighting the efficiency of the adsorption process. The difference in adsorption capacity as a function of pH was correlated to the pHpzc of the BSP, which was equal to 8.2. Thus, at pH below pHpzc, electrostatic attraction between the fluoride anions and the positively charged adsorbent could justify the adsorption mechanism. Fittings of experimental data have evidenced that the adsorption kinetics were of pseudo-second order whereas the adsorption isotherms were of Langmuir type. The chemical precipitation of calcium fluoride was also revealed to occur upon release of Ca²⁺ from partial dissolution of CaCO₃ in acidic conditions.

The Processing of Calcium Rich Agricultural and Industrial Waste for Recovery of Calcium Carbonate and Calcium Oxide and Their Application for Environmental Cleanup: A Review

Every year a million tonnes of calcium rich agro and industrial waste are generated around the whole globe. These calcium rich waste like finger citron, shells of cockle, mussel, oysters etc., and egg shell are biological sources which have various organic compounds. The inorganic calcium rich waste includes gypsum, dolomite, sludge etc., which are produced in surplus amount globally. Most of these by-products are mainly dumped, while few are used for land-filling purposes which leads to the pollution. These agro and industrial by-products could be processed for the recovery of calcium carbonate and calcium oxide particles by physical and chemical method. The recovery of calcium carbonate and calcium oxide particles from such by products make them biocompatible. Moreover, the products are economical due to their synthesis from waste materials. Here, in this current review work we have emphasized on the all the calcium rich agro industries and industrial by products, especially their processing by various approaches. Further, we have also focused on the properties and application of such calcium carbonate and oxide particles for the remediation of organic and inorganic pollutants from the environments. The recovery of such particles from these byproducts is considered not only economical and eco-friendly but it also minimizes the pollution present in the form of solid waste.

Dextran/poly-L-arginine multi-layered CaCO3-based nanosystem for vascular drug delivery

The development of heterogeneous drug delivery systems leads to innovative strategies for targeted therapy of common pathologies, such as cancer, immunological and neurological disorders. Nowadays, it is possible to choose among a great variety of nanoparticles on the basis of the needs they have to satisfy. However, a candidate for the treatment of cardiovascular pathologies is still missing. In this context, a targeted therapy implies the conceptualization of nanoparticles that take active part in the treatment of vascular pathologies. The aim of this work was to provide a method to produce multi-layered calcium carbonate (CaCO₃) nanoparticles encapsulating a model protein, bovine serum albumin, with model antibodies on their surface. CaCO₃ nanoparticles were produced by the combination of complex coacervation and mineralization and were engineered using layer-by-layer technique with a polysaccharide, dextran sulfate, and a homo-poly-amino acid, poly-L-arginine. Morphology, biocompatibility, cellular uptake, influence on cell expression of the inflammatory marker matrix metalloproteinase-9, and hemocompatibility of the nanoparticles were studied. The presence of the dextran/poly-L-arginine layers did not negatively affect the nanoparticle overall characteristics and they did not trigger proinflammatory response in vitro. Taking together all the obtained results, we consider the proposed CaCO₃ nanoparticles as a promising tool in cardiovascular field.

Premature Aging Among Trauma Survivors-The Longitudinal Implications of Sleep Disruptions on Telomere Length and Cognitive Performance

OBJECTIVES

Sleep is necessary for brain function as well as physical and cognitive processes. Sleep disruptions, common with aging, intensify among trauma survivors. Moreover, former prisoners-of-war (ex-POWs) often experience premature aging. This study investigates the longitudinal effects of sleep disruptions for ex-POWs in relation to cognitive performance and telomere length as well as between cognition and telomeres.

METHOD

This study included Israeli veterans from the 1973 Yom Kippur War who participated in four assessments (1991, 2003, 2008, 2015): (a) ex-POWs (n = 99), and (b) veterans who not were captured (controls) (n = 101). Among both groups, sleep disruptions were assessed using a self-report item in all four assessments. Cognitive performance was assessed using the Montreal Cognitive Assessment (MOCA) and telomere length was assessed via total white blood cells (leukocytes) from whole blood samples using Southern blot, both were measured only among ex-POWs in 2015. We conducted descriptive statistics, repeated measures, correlations, and path analyses.

RESULTS

Sleep disruptions were related to lower cognitive performance but not to shorter telomeres. Moreover, cognitive performance and telomere length were found to be related when sleep disruptions were taken into consideration.

CONCLUSION

Interpersonal trauma was shown to be a unique experience resulting in sleep disruptions over time, leading to cognitive impairment. These findings highlight the importance of viewing trauma survivors at high-risk for sleep disruptions. Therefore, it is imperative to inquire about sleep and diagnose cognitive disorders to help identify and treat premature aging.

Rapid Gas-Engineering to the Manufacture of Graphene-Like Mesoporous Carbon Nanosheets with a Large Aspect Ratio

Porous carbon nanosheets (PCNs) with a large two-dimensional morphology and high porosity have emerged as an important class of 2D materials, while developing novel technology to manufacture high-quality PCNs in terms of convenience, high output, and economic benefit remains a challenge. Herein, a rapid gas-engineering technology is developed to fabricate graphene-like mesoporous carbon nanosheets (MCNs) with large aspect ratios (>2500, length/thickness). By easy carbonization of calcium gluconate under reduced pressure, MCNs with ultrathin (∼12 nm) thickness, ultralarge (>20 μm) lamella morphology, and high surface area (∼1155 m²/g) are fabricated in kilogram scale. Two-dimensional lamella morphology transformation, pore architectures, and calcium compounds transformation mechanisms are unraveled by in situ variable temperature X-ray diffraction (VT-XRD), high-resolution transmission electron microscopy (HRTEM), ex situ scanning electron microscopy (SEM), and atomic force microscopy (AFM). The key to the synthesis is the negative pressure operation, which triggers the rapid gas expansion in a gas-solid system. This design relied on the gas expansion mechanism has realized producing of high-quality MCNs via a rapid, high-throughput, and cost-effective way. Due to high surface utilization and low weight density, when served as a lightweight separator coating layer, MCNs exhibit impressive capture ability toward polysulfides and achieve a high-stability lithium-sulfur battery.

Cockle shell-derived aragonite calcium carbonate nanoparticle for targeting cancer and breast cancer stem cells

Cockle shell-derived aragonite calcium carbonate nanoparticles (CACNP) have demonstrated prospect as nano-sized drug carriers for targeting cancer cells. CACNP is biocompatible, biodegradable and its biomaterial is readily available and is of low cost. In addition, CACNP is highly porous, has a large surface area which confer a high loading capacity. The pH-dependent release properties as well as its potential for surface functionalization with targeting agents make CACNP useful in passive and active targeting of cancer cells and cancer stem cells. In this article, we reviewed the current state of CACNP as nano-sized drug carrier for targeting cancer cells, cancer stem cells and its biocompatibility.

Feeding Cells with a Novel "Trojan" Carrier: Citrate Nanoparticles

In this work, the preparation of novel calcium citrate (CaCit) nanoparticles (NPs) has been disclosed and the use of these NPs as "Trojan" carriers has been demonstrated. The concentration ratio between calcium ions and citrate ions was optimized, yielding spherical NPs with size in the range of 100-200 nm. Additionally, a fluorescent dye, fluorescein isothiocyanate (FITC), was successfully encapsulated by the coprecipitation method. The products were characterized by thermogravimetric analysis and scanning electron microscopy. The cellular uptake was investigated by incubating the synthesized fluorescent-tagged NPs with human keratinocytes using a confocal microscope. The accumulation of the FITC in the cells suggested that the CaCit NPs can potentially be used as novel drug carriers.

Porous Inorganic and Hybrid Systems for Drug Delivery: Future Promise in Combatting Drug Resistance and Translation to Botanical Applications

BACKGROUND

Porous micro- and nanoparticles have the capacity to encapsulate a large quantity of therapeutics, making them promising delivery vehicles for a variety of applications. This review aims to highlight the latest development of inorganic and hybrid (inorganic/ organic) particles for drug delivery with an additional emphasis on combatting drug resistant cancer. We go one step further and discuss delivery applications beyond medicinal delivery, as there is generally a translation from medicinal delivery to botanic delivery after a short lag time.

METHODS

We undertook a search of relevant peer-reviewed publications. The quality of the relevant papers was appraised using standard tools. The characteristics of the papers are described herein, and the relevant material and therapeutic properties are discussed.

RESULTS

We discuss 4 classes of porous particles in terms of drug delivery and theranostics. We specifically focus on silica, calcium carbonate, metal-phenolic network, and metalorganic framework particles. Other relevant biomedically relevant applications are discussed and we highlight outstanding therapeutic results in the relevant literature.

CONCLUSION

The findings of this review confirm the importance of studying and utilizing porous particles for therapeutic delivery. Moreover, we show that the properties of porous particles that make them promising for medicinal drug delivery also make them promising candidates for agro-industrial applications.

Ball milling of eggshell waste as a green and sustainable approach: A review

Eggshell waste belongs to the most abundant natural waste in nature and is created in huge amounts by everyday consumption of eggs. The majority of this material is being discarded, despite the fact that it has multidisciplinary applications. In this review, the possibility of utilizing the method of ball milling to further broaden the application potential of this material is discussed. The particular application fields include the formation of nanophases, bioceramics synthesis, formation of composites and preparation of material with increased sorption ability. In addition, some other specific applications, like the utilization of ball-milled eggshell as a drug delivery agent, or for the formation of antibacterially active species, are also mentioned. The review provides a critical mechanochemical insight into this topic and aims to emphasize the green and sustainable way of utilizing eggshell waste by environmentally friendly method.

Fabrication, Characterization and Cytotoxicity of Spherical-Shaped Conjugated Gold-Cockle Shell Derived Calcium Carbonate Nanoparticles for Biomedical Applications

The evolution of nanomaterial in science has brought about a growing increase in nanotechnology, biomedicine, and engineering fields. This study was aimed at fabrication and characterization of conjugated gold-cockle shell-derived calcium carbonate nanoparticles (Au-CSCaCO3NPs) for biomedical application. The synthetic technique employed used gold nanoparticle citrate reduction method and a simple precipitation method coupled with mechanical use of a Programmable roller-ball mill. The synthesized conjugated nanomaterial was characterized for its physicochemical properties using transmission electron microscope (TEM), field emission scanning electron microscope (FESEM) equipped with energy dispersive X-ray (EDX) and Fourier transform infrared spectroscopy (FTIR). However, the intricacy of cellular mechanisms can prove challenging for nanomaterial like Au-CSCaCO3NPs and thus, the need for cytotoxicity assessment. The obtained spherical-shaped nanoparticles (light-green purplish) have an average diameter size of 35 ± 16 nm, high carbon and oxygen composition. The conjugated nanomaterial, also possesses a unique spectra for aragonite polymorph and carboxylic bond significantly supporting interactions between conjugated nanoparticles. The negative surface charge and spectra absorbance highlighted their stability. The resultant spherical shaped conjugated Au-CSCaCO3NPs could be a great nanomaterial for biomedical applications.

Autotemplate Microcapsules of CaCO3/Pectin and Nonstoichiometric Complexes as Sustained Tetracycline Hydrochloride Delivery Carriers

New types of composites were obtained by an autotemplate method for assembling hollow CaCO₃ capsules by using pH-sensitive polymers. Five pectin samples, which differ in the methylation degree and/or amide content, and some nonstoichiometric polyelectrolyte complex dispersions, prepared with the pectin samples and poly(allylamine hydrochloride), were used to control the crystal growth. The morphology of the composites was investigated by scanning electron microscopy, and the polymorphs characteristics were investigated by FTIR spectroscopy. The presence of the polymer in the composite particles was evidenced by X-ray photoelectron spectroscopy, particle charge density, and zeta-potential. The new CaCO₃/pectin hollow capsules were tested as a possible matrix for a tetracycline hydrochloride carrier. The kinetics of the drug release mechanism was followed using Higuchi and Korsmeyer-Peppas mathematical models.

Synthesis, functionalization, characterization, and in vitro evaluation of robust pH-sensitive CFNs–PA–CaCO3

The preparation, characterization, and application of Papain (PA) conjugated CaCO₃-coated cobalt ferrite nanoparticles (CFNs–PA–CaCO₃) is reported.