Ocular Biocompatibility of Poly-N-Isopropylacrylamide (pNIPAM)

Retrospective observation of the early efficacy and safety of temperature-sensitive liquid embolic agent combined with polyvinyl alcohol microspheres for prostatic artery embolization in the treatment of lower urinary tract symptoms caused by benign prostatic hyperplasia

Background

In recent years, prostatic artery embolization (PAE) has gradually become a hot topic in the treatment of symptomatic benign prostatic hyperplasia (BPH). However, there is an ongoing debate regarding the best embolization material for PAE. This study aimed to compare the safety and efficacy of the temperature-sensitive liquid embolic agent (TempSLE) combined with polyvinyl alcohol (PVA) microspheres and simple PVA microspheres for PAE in treating lower urinary tract symptoms (LUTS) caused by BPH.

Methods

The clinical data of 39 patients with LUTS caused by BPH were included in this study, including 21 cases of PVA microspheres group and 18 cases of PVA microspheres + TempSLE group. The changes in various subjective and objective indexes were compared between the two groups before PAE, 1 and 3 months after operation.

Results

Three months after operation, the improvement in prostate volume (PV), post-void residual volume (PVR), peak urinary flow rate (Qmax), international prostate symptom score (IPSS), quality of life (QoL) and total prostate-specific antigen (T-PSA) in both groups were significantly improved compared with those before operation (P<0.05). And the above clinical improvement indicators at the 3-month mark demonstrated a statistically significant difference between the two groups (P<0.05). Compared with the PVA microspheres group, the prostate necrosis rate of the PVA microspheres + TempSLE was higher at 1 and 3 months after operation (P<0.05). Moreover, the PVA microspheres + TempSLE group had no significant complications, with the exception of a single case of transient gross hematuria during the perioperative period.

Conclusions

The combination of PVA microspheres and TempSLE for PAE appears to be safe and effective in the treatment of symptomatic BPH patients, with a higher degree of damage to hyperplastic prostate tissue compared to simple PVA microspheres embolization.

Study of the Thermal Phase Transition of Poly(N,N-diethylacrylamide-co-N-ethylacrylamide) Random Copolymers in Aqueous Solution

N-alkyl-substituted polyacrylamides exhibit a thermal coil-to-globule transition in aqueous solution driven by an increase in hydrophobic interactions with rising temperature. With the aim of understanding the role of N-alkyl substituents in the thermal transition, this study focuses on the molecular interactions underlying the phase transition of poly(N,N-diethylacrylamide-co-N-ethylacrylamide) random copolymers. Poly(N,N-diethylacrylamide) (PDEAm), poly(N-ethylacrylamide) (PNEAm), and their random copolymers were synthesized by free radical polymerization and their chemical structure characterized spectroscopically. It was found that the values of the cloud-point temperature increased with PNEAm content, and particle aggregation processes took place, increasing the negative charge density on their surface. The cloud-point temperature of each copolymer decreased with respect to the theoretical values calculated assuming an absence of interactions. It is attributed to the formation of intra- and interchain hydrogen bonding in aqueous solutions. These interactions favor the formation of more hydrophobic macromolecular segments, thereby promoting the cooperative nature of the transition. These results definitively reveal the dominant mechanism occurring during the phase transition in the aqueous solutions of these copolymers.

Thermosensitive Polymeric Nanoparticles for Drug Co-Encapsulation and Breast Cancer Treatment

Despite advances in breast cancer treatment, there remains a need for local management of noninvasive, low-grade ductal carcinoma in situ (DCIS). These focal lesions are well suited for local intraductal treatment. Intraductal administration supported target site drug retention, improved efficacy, and reduced systemic exposure. Here, we used a poly(N-isopropyl acrylamide, pNIPAM) nanoparticle delivery system loaded with cytotoxic piplartine and an MAPKAP Kinase 2 inhibitor (YARA) for this purpose. For tumor environment targeting, a collagen-binding peptide SILY (RRANAALKAGELYKSILYGSG-hydrazide) was attached to pNIPAM nanoparticles, and the nanoparticle diameter, zeta potential, drug loading, and release were assessed. The system was evaluated for cytotoxicity in a 2D cell culture and 3D spheroids. In vivo efficacy was evaluated using a chemical carcinogenesis model in female Sprague-Dawley rats. Nanoparticle delivery significantly reduced the IC50 of piplartine (4.9 times) compared to the drug in solution. The combination of piplartine and YARA in nanoparticles further reduced the piplartine IC50 (~15 times). Treatment with these nanoparticles decreased the in vivo tumor incidence (5.2 times). Notably, the concentration of piplartine in mammary glands treated with nanoparticles (35.3 ± 22.4 μg/mL) was substantially higher than in plasma (0.7 ± 0.05 μg/mL), demonstrating targeted drug retention. These results indicate that our nanocarrier system effectively reduced tumor development with low systemic exposure.

Influence of Dopamine Methacrylamide on Swelling Behavior and Nanomechanical Properties of PNIPAM Microgels

The combination of the catechol-containing comonomer dopamine methacrylamide (DMA) with stimuli-responsive poly(N-isopropylacrylamide) (PNIPAM) microgels bears a huge potential in research and for applications due to the versatile properties of catechols. This research gives the first detailed insights into the influence of DMA on the swelling of PNIPAM microgels and their nanomechanical properties. Dynamic light scattering measurements showed that DMA decreases the volume phase transition temperature and completion temperature due to its higher hydrophobicity when compared to NIPAM, while sharpening the transition. The cross-linking ability of DMA decreases the swelling ratios and mesh sizes of the microgels. Microgels adsorbed at the solid surface are characterized by atomic force microscopy─as the DMA content increases, microgels protrude more from the surface. Force spectroscopy measurements below and above the volume phase transition temperature display a stiffening of the microgels with the incorporation of DMA and upon heating across its entire cross section as evidenced by an increase in the E modulus. This confirms the cross-linking ability of DMA. The affine network factor β, derived from the Flory-Rehner theory, is linearly correlated with the E moduli of both pure PNIPAM and P(NIPAM-co-DMA) microgels. However, large DMA amounts hinder the microgel shrinking while maintaining mechanical stiffness, possibly due to catechol interactions within the microgel network.

Biocompatible Polymer for Self-Humidification

Lung supportive devices (LSDs) have been extensively utilized in treating patients diagnosed with various respiratory disorders. However, these devices can cause moisture depletion in the upper airway by interfering with the natural lubrication and air conditioning process. To remedy this, current technologies implement heated humidification processes, which are bulky, costly, and nonfriendly. However, it has been demonstrated that in a breath cycle, the amount of water vapor in the exhaled air is of a similar quantity to the amount needed to humidify the inhaled air. This research proposes to trap the moisture from exhaled air and reuse it during inhalation by developing a state-of-the-art hydrophilic/hydrophobic polymer tuned to deliver this purpose. Using the atom transfer radical polymerization (ATRP) method, a substrate was successfully created by incorporating poly (N-isopropyl acrylamide) (PNIPAM) onto cotton. The fabricated material exhibited a water vapor release rate of 24.2 ± 1.054%/min at 32 °C, indicating its ability to humidify the inhaled air effectively. These findings highlight the potential of the developed material as a promising solution for applications requiring rapid moisture recovery.

Synergistic Bonding of Poly(N-isopropylacrylamide)-Based Hybrid Microgels and Gold Nanoparticles Used for Temperature-Responsive Controllable Catalysis of p-Nitrophenol Reduction

Stimuli-responsive hybrid nanoparticles used for controllable catalysis have been attracting increasing attention. This study aims to prepare hybrid microgels with excellent temperature-sensitive colorimetric and catalytic properties through combining the surface plasmon resonance properties of gold nanoparticles (AuNPs) with the temperature-sensitive properties of poly(N-isopropylacrylamide) (PNIPAM)-based microgels. Microgels with hydroxy groups (MG-OH) were prepared by soap-free emulsion polymerization, using N-isopropylacrylamide as the main monomer, hydroxyethyl methylacrylate as the functional monomer, N,N'-methylene bisacrylamide as the crosslinker, and 2,2'-azobis(2-methylpropionamidine) dihydrochloride as an initiator to ensure the microgels are positively charged. Furthermore, chemical modification on the surface of MG-OH was carried out by 3-mercaptopropyltriethoxysilane to obtain thiolated microgels (MG-SH). Two kinds of hybrid nanoparticles, AuNPs@MG-OH and AuNPs@MG-SH, were self-assembled, through electrostatic interaction between positive MG-OH and negative citrate-stabilized AuNPs as well as through synergistic bonding of electrostatic interaction and Au-S bonding between positive MG-SH and negative AuNPs. The morphology, stability, temperature-sensitive colorimetric properties, and catalytic properties of hybrid microgels were systematically investigated. Results showed that although both AuNPs@MG-OH and AuNPs@MG-SH exhibit good temperature-sensitive colorimetric properties and controllable catalytic properties for the reduction reaction of p-nitrophenol, AuNPs@MG-SH with synergistic bonding has better stability and higher catalytic performance than AuNPs@MG-OH. This work has good competitiveness against known PNIPAM-based materials and may provide an effective method for preparing smart catalysts by self-assembly with stimuli-responsive polymers, which has a great potential application for catalyzing a variety of reactions.

Acousto-Photolithography for Programmable Shape Deformation of Composite Hydrogel Sheets

Stimuli-responsive hydrogels with programmable shapes produced by defined patterns of particles are of great interest for the fabrication of small-scale soft actuators and robots. Patterning the particles in the hydrogels during fabrication generally requires external magnetic or electric fields, thus limiting the material choice for the particles. Acoustically driven particle manipulation, however, solely depends on the acoustic impedance difference between the particles and the surrounding fluid, making it a more versatile method to spatially control particles. Here, an approach is reported by combining direct acoustic force to align photothermal particles and photolithography to spatially immobilize these alignments within a temperature-responsive poly(N-isopropylacrylamide) hydrogel to trigger shape deformation under temperature change and light exposure. The spatial distribution of particles can be tuned by the power and frequency of the acoustic waves. Specifically, changing the spacing between the particle patterns and position alters the bending curvature and direction of this composite hydrogel sheet, respectively. Moreover, the orientation (i.e., relative angle) of the particle alignments with respect to the long axis of laser-cut hydrogel strips governs the bending behaviors and the subsequent shape deformation by external stimuli. This acousto-photolithography provides a means of spatiotemporal programming of the internal heterogeneity of composite polymeric systems.

Interplay of the Influence of Crosslinker Content and Model Drugs on the Phase Transition of Thermoresponsive PNiPAM-BIS Microgels

The phase transition behavior of differently crosslinked poly(N-isopropylacrylamide)/N,N’-methylenebisacrylamide (PNiPAM/BIS) microgels with varying crosslinker content is investigated in presence of aromatic additives. The influence of meta-hydroxybenzaldehyde (m-HBA) and 2,4-dihydroxybenzaldehyde (2,4-DHBA), chosen as model drugs, on the volume phase transition temperature (VPTT) is analyzed by dynamic light scattering (DLS), differential scanning calorimetry (DSC), and ¹H-NMR, monitoring and comparing the structural, calorimetric, and dynamic phase transition, respectively. Generally, the VPTT is found to increase with crosslinker content, accompanied by a drastic decrease of transition enthalpy. The presence of an additive generally decreases the VPTT, but with distinct differences concerning the crosslinker content. While the structural transition is most affected at lowest crosslinker content, the calorimetric and dynamic transitions are most affected for an intermediate crosslinker content. Additive uptake of the collapsed gel is largest for low crosslinked microgels and in case of large additive-induced temperature shifts. Furthermore, as temperature is successively raised, ¹H NMR data, aided by spin relaxation rates, reveal an interesting uptake behavior, as the microgels act in a sponge-like fashion including a large initial uptake and a squeeze-out phase above VPTT.

Polymer based sustained drug delivery to the ocular posterior segment: barriers and future opportunities for the treatment of neovascular pathologies

There is an increasing momentum in research and pharmaceutical industry communities to design sustained, non-invasive delivery systems to treat chronic neovascular ocular diseases that affect the posterior segment of the eye including age-related macular degeneration and diabetic retinopathy. Current treatments include VEGF blockers, which have revolutionized the standard of care for patients, but their maximum therapeutic benefit is hampered by the need for recurrent and invasive administration procedures. Currently approved delivery systems intended to address these limitations exploit polymer technology to regulate drug release in a sustained manner. Here, we critically review sustained drug delivery approaches for the treatment of chronic neovascular diseases affecting the ocular posterior segment, with a special emphasis on novel and polymeric technologies spanning the spectrum of preclinical and clinical investigation, and those approved for treatment. The mechanism by which each formulation imparts sustained release, the impact of formulation characteristics on release and foreign body reaction, and special considerations related to the translation of these systems are discussed.

Soft Devices for High-Resolution Neuro-Stimulation: The Interplay Between Low-Rigidity and Resolution

The field of neurostimulation has evolved over the last few decades from a crude, low-resolution approach to a highly sophisticated methodology entailing the use of state-of-the-art technologies. Neurostimulation has been tested for a growing number of neurological applications, demonstrating great promise and attracting growing attention in both academia and industry. Despite tremendous progress, long-term stability of the implants, their large dimensions, their rigidity and the methods of their introduction and anchoring to sensitive neural tissue remain challenging. The purpose of this review is to provide a concise introduction to the field of high-resolution neurostimulation from a technological perspective and to focus on opportunities stemming from developments in materials sciences and engineering to reduce device rigidity while optimizing electrode small dimensions. We discuss how these factors may contribute to smaller, lighter, softer and higher electrode density devices.

Metal Sulfide Semiconductor Nanomaterials and Polymer Microgels for Biomedical Applications

The development of nanomaterials with therapeutic and/or diagnostic properties has been an active area of research in biomedical sciences over the past decade. Nanomaterials have been identified as significant medical tools with potential therapeutic and diagnostic capabilities that are practically impossible to accomplish using larger molecules or bulk materials. Fabrication of nanomaterials is the most effective platform to engineer therapeutic agents and delivery systems for the treatment of cancer. This is mostly due to the high selectivity of nanomaterials for cancerous cells, which is attributable to the porous morphology of tumour cells which allows nanomaterials to accumulate more in tumour cells more than in normal cells. Nanomaterials can be used as potential drug delivery systems since they exist in similar scale as proteins. The unique properties of nanomaterials have drawn a lot of interest from researchers in search of new chemotherapeutic treatment for cancer. Metal sulfide nanomaterials have emerged as the most used frameworks in the past decade, but they tend to aggregate because of their high surface energy which triggers the thermodynamically favoured interaction. Stabilizing agents such as polymer and microgels have been utilized to inhibit the particles from any aggregations. In this review, we explore the development of metal sulfide polymer/microgel nanocomposites as therapeutic agents against cancerous cells.

Nanotechnology Based Approaches in Phage Therapy: Overcoming the Pharmacological Barriers

With the emergence and spread of global antibiotic resistance and the need for searching safer alternatives, there has been resurgence in exploring the use of bacteriophages in the treatment of bacterial infections referred as phage therapy. Although modern phage therapy has come a long way as demonstrated by numerous efficacy studies but the fact remains that till date, phage therapy has not received regulatory approval for human use (except for compassionate use).Thus, to hit the clinical market, the roadblocks need to be seriously addressed and gaps mended with modern solution based technologies. Nanotechnology represents one such ideal and powerful tool for overcoming the pharmacological barriers (low stability, poor in-vivo retention, targeted delivery, neutralisation by immune system etc.) of administered phage preparations.In literature, there are many review articles on nanotechnology and bacteriophages but these are primarily focussed on highlighting the use of lytic and temperate phages in different fields of nano-medicine such as nanoprobes, nanosensors, cancer diagnostics, cancer cell targeting, drug delivery through phage receptors, phage display etc. Reviews specifically focused on the use of nanotechnology driven techniques strictly to improve phage therapy are however limited. Moreover, these review if present have primarily focussed on discussing encapsulation as a primary method for improving the stability and retention of phage(s) in the body.With new advances made in the field of nanotechnology, approaches extend from mere encapsulation to recently adopted newer strategies. The present review gives a detailed insight into the more recent strategies which include 1) use of lipid based nano-carriers (liposomes, transfersomes etc.) 2) adopting microfluidic based approach, surface modification methods to further enhance the efficiency and stability of phage loaded liposomes 3) Nano- emulsification approach with integration of microfluidics for producing multiple emulsions (suitable for phage cocktails) with unique control over size, shape and drop morphology 4) Phage loaded nanofibers produced by electro-spinning and advanced core shell nanofibers for immediate, biphasic and delayed release systems and 5) Smart release drug delivery platforms that allow superior control over dosing and phage release as and when required. All these new advances are aimed at creating a suitable housing system for therapeutic bacteriophage preparations while targeting the multiple issues of phage therapy i.e., improving phage stability and titers, improving in-vivo retention times, acting as suitable delivery systems for sustained release at target site of infection, improved penetration into biofilms and protection from immune cell attack. The present review thus aims at giving a complete insight into the recent advances (2010 onwards) related to various nanotechnology based approaches to address the issues pertaining to phage therapy. This is essential for improving the overall therapeutic index and success of phage therapy for future clinical approval.

New epiretinal implant with integrated sensor chips for optical capturing shows a good biocompatibility profile in vitro and in vivo

BACKGROUND

Retinal degenerative diseases, e.g., retinitis pigmentosa, cause a severe decline of the visual function up to blindness. Treatment still remains difficult; however, implantation of retinal prostheses can help restoring vision. In this study, the biocompatibility and surgical feasibility of a newly developed epiretinal stimulator (OPTO-EPIRET) was investigated. The previously developed implant was extended by an integrated circuit-based optical capturing, which will enable the immediate conversion of the visual field into stimulation patterns to stimulate retinal ganglion cells.

RESULTS

The biocompatibility of the OPTO-EPIRET was investigated in vitro using the two different cell lines L-929 and R28. Direct and indirect contact were analyzed in terms of cell proliferation, cell viability, and gene expression. The surgical feasibility was initially tested by implanting the OPTO-EPIRET in cadaveric rabbit eyes. Afterwards, inactive devices were implanted in six rabbits for feasibility and biocompatibility testings in vivo. In follow-up controls (1-12 weeks post-surgery), the eyes were examined using fundoscopy and optical coherence tomography. After finalization, histological examination was performed to analyze the retinal structure. Regarding the in vitro biocompatibility, no significant influence on cell viability was detected (L929: < 1.3% dead cells; R-28: < 0.8% dead cells). The surgery, which comprised phacoemulsification, vitrectomy, and implantation of the OPTO-EPIRET through a 9-10 mm corneal incision, was successfully established. The implant was fixated with a retinal tack. Vitreal hemorrhage or retinal tearing occurred as main adverse effects. Transitional corneal edema caused difficulties in post-surgical imaging.

CONCLUSIONS

The OPTO-EPIRET stimulator showed a good biocompatibility profile in vitro. Furthermore, the implantation surgery was shown to be feasible. However, further design optimization steps are necessary to avoid intra- and postoperative complications. Overall, the OPTO-EPIRET will allow for a wide visual field and good visual acuity due to a high density of electrodes in the central retina.

The progress in corneal translational medicine

Cornea tissue is in high demand by tissue donation centres globally, and thus tissue engineering cornea, which is the main topic of corneal translational medicine, can serve as a limitless alternative to a donated human cornea tissue. Tissue engineering aims to produce solutions to the challenges associated with conventional cornea tissue, including transplantation and use of human amniotic membrane (HAM), which have issues with storage and immune rejection in patients. Accordingly, by carefully selecting biomaterials and fabrication methods to produce these therapeutic tissues, the demand for cornea tissue can be met, with an improved healing outcome for recipients with less associated harmful risks. In this review paper, we aim to present the recent advancements in the research and clinical applications of cornea tissue, applications including biomaterial selection, fabrication methods, scaffold structure, cellular response to these scaffolds, and future advancements of these techniques.

Treatment Efficacy and Biocompatibility of a Biodegradable Aflibercept-Loaded Microsphere-Hydrogel Drug Delivery System

Purpose

To evaluate the in vivo treatment efficacy and biocompatibility of a biodegradable aflibercept-loaded microsphere-hydrogel drug delivery system (DDS) in a laser-induced choroidal neovascularization (CNV) rat model.

Methods

Two weeks after CNV induction, animals were randomly assigned into four experimental groups: (1) no treatment, (2) single intravitreal (IVT) injection of blank DDS, (3) bimonthly bolus IVT aflibercept injections, and (4) single IVT injection of aflibercept-DDS. CNV lesion sizes were monitored longitudinally using fluorescence angiography and multi-Otsu thresholding for 6 months. For safety and biocompatibility assessment, an additional three non-CNV animals received a blank DDS injection. Electroretinogram, intraocular pressure, and clinical ophthalmoscopic examinations were performed.

Results

The average lesion areas at week 0 (treatment intervention) were (1) 8693 ± 628 µm² for no treatment, (2) 8261 ± 709 µm² for blank DDS, (3) 10,368 ± 885 µm² for bolus, and (4) 10,306 ± 1212 µm² for aflibercept-DDS. For the nontreated groups, CNV lesion size increased by week 2 and remained increased throughout the study. The treated groups exhibited CNV size reduction after week 2 and remained for 6 months. At week 22, the average percent changes in CNV lesion area were +38.87% ± 7.08%, +34.19% ± 9.93%, -25.95% ± 3.51%, and -32.69% ± 5.40% for the above corresponding groups. No signs of chronic inflammation and other ocular abnormalities were found.

Conclusions

The aflibercept-DDS was effective in treating CNV lesions for 6 months and is safe, well tolerated, and biocompatible.

Translational Relevance

The proposed DDS is a promising system to reduce IVT injection frequency for anti-vascular endothelial growth factor treatment.

Dual drug delivery system based on pH-sensitive silk fibroin/alginate nanoparticles entrapped in PNIPAM hydrogel for treating severe infected burn wound

Herein, the pH-sensitive vancomycin (VANCO) loaded silk fibroin-sodium alginate nanoparticles (NPs) embedded in poly(N-isopropylacrylamide) (PNIPAM) hydrogel containing epidermal growth factor (EGF) are introduced for treating chronic burn wound infections. The hybrid system was developed to control the release rates of an antibiotic and growth factor for optimal treatment of burn infections. VANCO had a pH responsive release behavior from the nanoparticle (NP) and showed higher release rate in an alkaline pH compared to the neutral pH during 10 d. About 30% of EGF was also released from the hydrogel within 20 d. The released VANCO and EGF preserved their bioactivity more than ∼ 80%. The suitable physico-chemical properties and cellular behaviors of PNIPAM hydrogel supported the proliferation and growth of the fibroblast cells. Furthermore, the higher re-epithelialization with good wound contraction rate, neovascular formation, and expression of transforming growth factor-beta were observed in S. aureus infected rat burn wound by using the hydrogel containing VANCO and EGF compared with untreated wounds and hydrogel alone. The wound infection was also significantly reduced in the groups treated with the hydrogels containing VANCO. Overall, in vitro and in vivo results suggested that developed hybrid system would be a promising construct to treat severe wound infection.

Ocular Drug Delivery: A Special Focus on the Thermosensitive Approach

The bioavailability of ophthalmic therapeutics is reduced because of the presence of physiological barriers whose primary function is to hinder the entry of exogenous agents, therefore also decreasing the bioavailability of locally administered drugs. Consequently, repeated ocular administrations are required. Hence, the development of drug delivery systems that ensure suitable drug concentration for prolonged times in different ocular tissues is certainly of great importance. This objective can be partially achieved using thermosensitive drug delivery systems that, owing to their ability of changing their state in response to temperature variations, from room to body temperature, may increase drug bioavailability. In the case of topical instillation, in situ forming gels increase pre-corneal drug residence time as a consequence of their enhanced adhesion to the corneal surface. Otherwise, in the case of intraocular and periocular, i.e., subconjunctival, retrobulbar, peribulbar administration, among others, they have the undoubted advantage of being easily injectable and, owing to their sudden thickening at body temperature, have the ability to form an in situ drug reservoir. As a result, the frequency of administration can be reduced, also favoring the patient’s adhesion to therapy. In the main section of this review, we discuss some of the most common treatment options for ocular diseases, with a special focus on posterior segment treatments, and summarize the most recent improvement deriving from thermosensitive drug delivery strategies. Aside from this, an additional section describes the most widespread in vitro models employed to evaluate the functionality of novel ophthalmic drug delivery systems.

Functional Glyco-Nanogels for Multivalent Interaction with Lectins

Interactions between glycans and proteins have tremendous impact in biomolecular interactions. They are important for cell–cell interactions, proliferation and much more. Here, we emphasize the glycan-mediated interactions between pathogens and host cells. Pseudomonas aeruginosa, responsible for a huge number of nosocomial infections, is especially the focus when it comes to glycan-derivatives as pathoblockers. We present a microwave assisted protecting group free synthesis of glycomonomers based on lactose, melibiose and fucose. The monomers were polymerized in a precipitation polymerization in the presence of NiPAm to form crosslinked glyco-nanogels. The influence of reaction parameters like crosslinker type or stabilizer amount was investigated. The gels were characterized in lectin binding studies using model lectins and showed size and composition-dependent inhibition of lectin binding. Due to multivalent presentation of glycans in the gel, the inhibition was clearly stronger than with unmodified saccharides, which was compared after determination of the glycan loading. First studies with Pseudomonas aeruginosa revealed a surprising influence on the secretion of virulence factors. Functional glycogels may be in the future potent alternatives or adjuvants for antibiotic treatment of infections based on glycan interactions between host and pathogen.

Recent Advances in Engineered Stem Cell-Derived Cell Sheets for Tissue Regeneration

The substantial progress made in the field of stem cell-based therapy has shown its significant potential applications for the regeneration of defective tissues and organs. Although previous studies have yielded promising results, several limitations remain and should be overcome for translating stem cell-based therapies to clinics. As a possible solution to current bottlenecks, cell sheet engineering (CSE) is an efficient scaffold-free method for harvesting intact cell sheets without the use of proteolytic enzymes, and may be able to accelerate the adoption of stem cell-based treatments for damaged tissues and organs regeneration. CSE uses a temperature-responsive polymer-immobilized surface to form unique, scaffold-free cell sheets composed of one or more cell layers maintained with important intercellular junctions, cell-secreted extracellular matrices, and other important cell surface proteins, which can be achieved by changing the surrounding temperature. These three-dimensional cell sheet-based tissues can be designed for use in clinical applications to target-specific tissue regeneration. This review will highlight the principles, progress, and clinical relevance of current approaches in the cell sheet-based technology, focusing on stem cell-based therapies for bone, periodontal, skin, and vascularized muscles.

Characterization of Biodegradable Microsphere-Hydrogel Ocular Drug Delivery System for Controlled and Extended Release of Ranibizumab

Purpose

To characterize a biodegradable microsphere-hydrogel drug delivery system (DDS) for controlled and extended release of ranibizumab.

Methods

The degradable microsphere-hydrogel DDSs were fabricated by suspending ranibizumab-loaded or blank poly(lactic-co-glycolic acid) microspheres within a poly(ethylene glycol)-co-(L-lactic-acid) diacrylate/N-isopropylacrylamide (PEG-PLLA-DA/NIPAAm) hydrogel. The thermal responsive behavior of various DDS formulations was characterized in terms of volume phase transition temperature (VPTT) and swelling ratios changes from 22°C to 42°C. The mechanical properties were characterized using rheological methods. Degradability of hydrogels were also examined via wet weight loss. Finally, Iodine-125 was used to radiolabel ranibizumab for characterization of encapsulation efficiency and in vitro release.

Results

All DDS formulations investigated were injectable through a 28-gauge needle at room temperature. The VPTT increased with increase of cross-linker concentration. The swelling ratios decreased as temperature increased and were not influenced by presence of microspheres. Rheology data confirmed that increase of cross-linker concentration and microsphere loading made DDS stiffer. Increase of degradable cross-linker concentration facilitated hydrogel in vitro degradation. Controlled release of ranibizumab were achieved for investigated DDS formulations for 6 months; and increased degradable cross-linker concentration produced faster and more complete release.

Conclusions

The biodegradable DDSs are suitable for sustained release of ranibizumab. Considering ease of injection, degradability and release of ranibizumab, DDS with 3 mM cross-linker concentration and less than 20 mg/mL microsphere loadings is more favorable for future application.

Translational Relevance

The investigated DDS is promising for controlled and extended release of anti-VEGF therapeutics to achieve better treatment regimen in ocular neovascularizations.

Tuning HIV drug release from a nanogel-basedin situforming implant by changing nanogel size

This paper reports anin situforming implant based on responsive nanogels that gives tuneable long-acting drug release.

Thermoresponsive polysaccharides and their thermoreversible physical hydrogel networks

Thermoresponsive polymers have been used extensively for various applications including food additives, pharmaceutical formulations, therapeutic delivery, cosmetics and environmental remediation, to mention a few. Many thermoresponsive polymers have the ability to form physical hydrogel networks in response to temperature changes, which are particularly useful for emerging biomedical applications, including cell therapies, drug delivery systems, tissue engineering, wound healing and 3D bioprinting. In particular, the use of polysaccharides with thermoresponsive properties has been of interest due to their wide availability, versatile functionality, biodegradability, and in many cases, inherent biocompatibility. Naturally thermoresponsive polysaccharides include agarose, carrageenans and gellan gum, which exhibit upper critical solution temperatures, transitioning from a solution to a gel state upon cooling. Arguably, this limits their use in biomedical applications, particularly for cell encapsulation as they require raised temperatures to maintain a solution state that may be detrimental to living systems. Conversely, significant progress has been made over recent years to develop synthetically modified polysaccharides, which tend to exhibit lower critical solution temperatures, transitioning from a solution to a gel state upon warming. Of particular interest are thermoresponsive polysaccharides with a lower critical solution temperature in between room temperature and physiological temperature, as their solutions can conveniently be manipulated at room temperature before gelling upon warming to physiological temperature, which makes them ideal candidates for many biological applications. Therefore, this review provides an introduction to the different types of thermoresponsive polysaccharides that have been developed, their resulting hydrogels and properties, and the exciting applications that have emerged as a result of these properties.

Overcoming Ovarian Cancer Drug Resistance with a Cold Responsive Nanomaterial

Drug resistance due to overexpression of membrane transporters in cancer cells and the existence of cancer stem cells (CSCs) is a major hurdle to effective and safe cancer chemotherapy. Nanoparticles have been explored to overcome cancer drug resistance. However, drug slowly released from nanoparticles can still be efficiently pumped out of drug-resistant cells. Here, a hybrid nanoparticle of phospholipid and polymers is developed to achieve cold-triggered burst release of encapsulated drug. With ice cooling to below ∼12 °C for both burst drug release and reduced membrane transporter activity, binding of the drug with its target in drug-resistant cells is evident, while it is minimal in the cells kept at 37 °C. Moreover, targeted drug delivery with the cold-responsive nanoparticles in combination with ice cooling not only can effectively kill drug-resistant ovarian cancer cells and their CSCs in vitro but also destroy both subcutaneous and orthotopic ovarian tumors in vivo with no evident systemic toxicity.

Nanosystems Based on Magnetic Nanoparticles and Thermo- or pH-Responsive Polymers: An Update and Future Perspectives

Combining hard matter, like inorganic nanocrystals, and soft materials, like polymers, can generate multipurpose materials with a broader range of applications with respect to the individual building blocks. Given their unique properties at the nanoscale, magnetic nanoparticles (MNPs) have drawn a great deal of interest due to their potential use in the biomedical field, targeting several applications such as heat hubs in magnetic hyperthermia (MHT, a heat-damage based therapy), contrast agents in magnetic resonance imaging (MRI), and nanocarriers for targeted drug delivery. At the same time, polymers, with their versatile macromolecular structure, can serve as flexible platforms with regard to constructing advanced functional materials. Advances in the development of novel polymerization techniques has enabled the preparation of a large portfolio of polymers that have intriguing physicochemical properties; in particular, those polymers that can undergo conformational and structural changes in response to their surrounding environmental stimuli. Therefore, merging the unique features of MNPs with polymer responsive properties, such as pH and thermal stimuli activation, enables smart control of polymer properties operated by the MNPs and vice versa at an unprecedented level of sophistication. These magnetic-stimuli-responsive nanosystems will impact the cancer field by combining magnetic hyperthermia with stimuli-dependent controlled drug delivery toward multimodal therapies. In this approach, a malignant tumor may be destroyed by a combination of the synergic effects of thermal energy generated by MNPs and the controlled release of antitumoral agents, activated by means of either heat or pH changes, finally leading to a much more effective cancer treatment than those available today. Also, taking advantage of such a triggered chemotherapy will overcome the notorious drawbacks of classic chemotherapy. Nevertheless, tracking the changes in the magnetic properties of such pH-responsive magnetic nanoparticles, which are provided by changes in relaxation signals of water molecules surrounding the nanoplatform, is a novel approach to the detection of pathological conditions (such as pH-changes at the ischemic and tumor sites). Despite great efforts by chemists to fabricate different featured materials, there have been few successful preclinical studies to date. A clinical translation of magnetic stimuli-responsive systems would require overcoming the actual nanosystem limitations and the joint efforts of an interdisciplinary scientific community. In this Account, we have framed state of the art magnetic stimuli-responsive systems, focusing on thermo- and pH-responsive behavior, following an organization based on the response mechanisms of polymers. By evaluating the features of the most representative and advanced nanosystems that already exist in literature, we present the challenges to overcome, the future directions to undertake for the development of magnetic stimuli-responsive nanoplatforms that will work under clinical operating conditions and have biodegradable and biocompatible features, and a consideration of the technical aspects.

Poly(N-isopropylacrylamide) and Copolymers: A Review on Recent Progresses in Biomedical Applications

The innate ability of poly(N-isopropylacrylamide) (PNIPAAm) thermo-responsive hydrogel to copolymerize and to graft synthetic polymers and biomolecules, in conjunction with the highly controlled methods of radical polymerization which are now available, have expedited the widespread number of papers published in the last decade-especially in the biomedical field. Therefore, PNIPAAm-based hydrogels are extensively investigated for applications on the controlled delivery of active molecules, in self-healing materials, tissue engineering, regenerative medicine, or in the smart encapsulation of cells. The most promising polymers for biodegradability enhancement of PNIPAAm hydrogels are probably poly(ethylene glycol) (PEG) and/or poly(ε-caprolactone) (PCL), whereas the biocompatibility is mostly achieved with biopolymers. Ultimately, advances in three-dimensional bioprinting technology would contribute to the design of new devices and medical tools with thermal stimuli response needs, fabricated with PNIPAAm hydrogels.

Thermoresponsive Gels

Thermoresponsive gelling materials constructed from natural and synthetic polymers can be used to provide triggered action and therefore customised products such as drug delivery and regenerative medicine types as well as for other industries. Some materials give Arrhenius-type viscosity changes based on coil to globule transitions. Others produce more counterintuitive responses to temperature change because of agglomeration induced by enthalpic or entropic drivers. Extensive covalent crosslinking superimposes complexity of response and the upper and lower critical solution temperatures can translate to critical volume temperatures for these swellable but insoluble gels. Their structure and volume response confer advantages for actuation though they lack robustness. Dynamic covalent bonding has created an intermediate category where shape moulding and self-healing variants are useful for several platforms. Developing synthesis methodology-for example, Reversible Addition Fragmentation chain Transfer (RAFT) and Atomic Transfer Radical Polymerisation (ATRP)-provides an almost infinite range of materials that can be used for many of these gelling systems. For those that self-assemble into micelle systems that can gel, the upper and lower critical solution temperatures (UCST and LCST) are analogous to those for simpler dispersible polymers. However, the tuned hydrophobic-hydrophilic balance plus the introduction of additional pH-sensitivity and, for instance, thermochromic response, open the potential for coupled mechanisms to create complex drug targeting effects at the cellular level.