Soft Tissue Stability around Single Implants Inserted to Replace Maxillary Lateral Incisors: A 3D Evaluation

Assessment of the intrasinusidal volume before and after maxillary sinus augmentation using mri - a pilot study of eight patients

PURPOSE

The purpose of this study was to evaluate the suitability, accuracy, and reliability of a non-invasive 3-Tesla magnetic resonance imaging technique (3 T-MRI) for the visualization of maxillary sinus grafts in comparison to conventional, X-ray-based, established standard imaging techniques.

METHODS

A total of eight patients with alveolar bone atrophy who required surgical sinus floor augmentation in the course of dental implantation were included in this pilot study. Alongside pre-operative cone-beam computed tomography (CBCT), 3 T-MRI was performed before and 6 months after sinus floor augmentation. Two investigators measured the maxillary sinus volume preoperatively and after bone augmentation.

RESULTS

In all cases, MRI demonstrated accurately the volumes of the maxillary sinus grafts. Following surgery, the bony structures suitable for an implant placement increased at an average of 4.89 cm3, corresponding with the decrease of the intrasinusidal volumes. In general, interexaminer discrepancies were low and without statistical significance.

CONCLUSION

In this preliminary study, we could demonstrate the feasibility of MRI bone volume measurement as a radiation-free alternative with comparable accuracy to CT/CBCT before procedures like sinus floor augmentation. Nevertheless, costs and artifacts, also present in MRI, have to be taken into account. Larger studies will be necessary to justify the practicability of MRI bone volume evaluation.

Selection criteria for immediate implant placement and immediate loading for single tooth replacement in the maxillary esthetic zone: A systematic review and meta-analysis

OBJECTIVES

The aim of this study was to review available evidence for Type 1A (immediate implant placement and immediate loading) of single tooth replacement in the maxillary esthetic zone.

MATERIALS AND METHODS

An electronic search was conducted utilizing the databases of MEDLINE, Embase, and Cochrane to identify publications reporting on the outcomes of Type 1A for single tooth replacement in the maxillary esthetic zone. The success and survival rates of the included articles were reported, which were further categorized according to the clinical criteria reported in Type 1A. Mean survival rates were univariately compared between risk groups and additionally between studies published before and since 2012 using bias-corrected and study size-weighed bootstrap tests. A study time-correcting meta-analysis was then performed to obtain an overall effect for the study pool.

RESULTS

A total of 3118 publications were identified in the search, with a total of 68 articles included. A mean number of implants per study were 37.2 and mean follow-up was 2.8 years. All the included studies utilizing Type 1A report highly selective inclusion and exclusion criteria. Univariate risk group comparison determined that studies before 2012 report a significantly lower mean survival rate (difference of -1.9 percentage points [PP], 95% CI: [-0.3, -4.0], p = .02), facial gap dimension had an impact on survival rates (+3.1 PP [0.2, 5.3] for width >2 mm, p = .04), as well as presence of endodontic infection (+2.6 PP [0.9, 5.1], p = .004).

CONCLUSIONS

Type 1A has a high survival rate in studies reporting strict patient and site selection criteria. Further research is required to assess esthetic and functional success with Type 1A treatments.

Guided implant surgery with R2Gate®: A multicenter retrospective clinical study with 1 year of follow-up

PURPOSE

To present the results obtained with a novel sleeveless and keyless guided implant surgery system.

METHODS

Inclusion criteria for this multicenter clinical retrospective study were fully or partially edentulous patients who had been treated with a sleeveless and keyless guided implant surgery system (R2Gate®, Megagen), and who had been rehabilitated with fixed restorations, with a minimum follow-up of 1 year. All surgeries and prosthetic procedures were conducted following the same protocol, and data were obtained from the patients' medical records. The outcomes were the fit and stability of the surgical guide, any intra-operative and immediate post-operative complications, any biologic and prosthetic complications that occurred during the 1-year follow-up period, implant survival, and prosthetic success.

RESULTS

Sixty patients were selected for the installation of 124 implants, through a guided procedure: 66 sleeveless, keyless surgical guides were manufactured. The incidence of immediate intra-operative (lack of space: 12.1%; lack of implant stability 2.6%) and immediate post-operative (pain and discomfort: 6.6%; mild swelling 3.3%) complications was low. In total, 112/124 implants (90.3%) were successfully placed with a guided procedure, in 52 patients; among them, 82 (73.2%) were placed with a flapless procedure. Thirty fixtures supported single crowns (SCs), 42 fixed partial dentures (FPDs) and 52 full-arch (FA) restorations. Sixty-two fixed prosthetic restorations (30 SCs, 22 FPDs and 10 FAs) were delivered; among these restorations, 15 (24.1%) were subjected to immediate functional loading. All implants (100%) survived. Two implants had peri‑implant mucositis (1.6%), two SCs had abutment screw loosenings (1.6%), two FAs and one FPD had ceramic chipping/fracture (2.4%), for an overall prosthetic success amounting to 88.7%.

CONCLUSIONS

Within the limits of this study, this novel guided surgery system appeared to be clinically reliable; further studies are needed to confirm these results.

STATEMENT OF CLINICAL RELEVANCE

The use of sleveless and keyless surgical guides can be clinically reliable and may be represent a valid option for the surgeon.

[Use of dental implants in orthopedic rehabilitation of patients in aesthetically important area]

The article presents a review of scientific data of Russian and non-Russian works dedicated to the problem of instant dental implantation in the aesthetically important areas, i.e. the upper jaw. The paper considers such anatomical factors of unsatisfactory aesthetic treatment results as presence and thickness of vestibular alveola wall, pathophysiological processes occurring while extracting teeth in this area, presence of odontogenic inflammatory sites and traumatic injuries under root canal and orthopaedic treatment, impact of gum's biotype on the condition of soft tissue in the area of the future orthopaedic prothesis. Data used in the article suggests the necessity of thorough diagnostic with the help of up-to-date technologies such as Cone beam computer tomography (CBCT).

Methods and parameters for digital evaluation of gingival recession: a critical review

OBJECTIVES

The aim of the present review was to find, compare, and critically discuss digital methods for quantitative evaluation of gingival recessions dimensions.

DATA

Collection of articles and classification related to digital evaluation of gingival recessions.

SOURCES

A search of PubMed, Web of Science, Scopus, and reference lists of articles was conducted up to April 2021 STUDY SELECTION: Twenty-two articles used digital evaluation of gingival recessions dimensions. The methods in the included articles were extracted, compared, and categorized.

RESULTS

Digital measurements were performed on 2D intraoral photographs, 3D models, or cross-sections obtained from 3D models. Baseline measurement were performed for diagnostic and treatment planning and categorised into distance and area measurements. Follow-up evaluation of treatment was based either on repeating the "baseline" measurements and calculating differences or measuring differences directly on composite images, composed from two superimposed images obtained at two time-points. Direct measurements were categorised into distance, area, and volume measurements.

CONCLUSIONS

Digital evaluation predominantly means just digitalization of the established evaluation methods; therefore, increasing measurements accuracy and maintaining comparability with past studies. At present, a large variability of digital evaluation workflow among the included studies renders the comparison among different studies difficult if not impossible. The potential of digital evaluation seems not to have been fully exploited as only a few novel measurements and parameters introduced, i.e., volumetric evaluation of soft tissue dynamics. For reproducible and comparable studies in the future, the research should be aimed at evaluation, optimization and standardization of all phases of the digital evaluation.

CLINICAL SIGNIFICANCE

Digital evaluation, based on 3D image superimposition is a promising approach as it increases measurements accuracy, maintains compatibility with past studies and simultaneously introduces novel evaluation possibilities.

CBCT analysis of the tissue thickness at immediate implant placement with contour augmentation in the maxillary anterior zone: a 1-year prospective clinical study

Background

Immediate implant placement with simultaneous contour augmentation such as guided bone regeneration (GBR) or connective tissue grafting (CTG) has been widely performed. However, few prospective studies have evaluated both peri-implant bone and soft tissue changes between the preoperative and postoperative periods. The purpose of this study is to quantify the horizontal dimensional changes of the facial bone and soft tissue following immediate implant placement with contour augmentation.

Material and methods

Twenty patients who underwent immediate implant placement in the anterior maxilla received GBR and CTG (test group) or GBR only (control group). Cone-beam computed tomography (CBCT) scans were taken preoperatively and 1 year after the definitive prosthesis connection, and then, they were superimposed. On the CBCT images of the two stages, the horizontal distance from the implant platform to the facial bone surface (BW) and the horizontal soft tissue width (GW) were measured at the implant platform level and 2 mm apical to the implant platform level. The sum of BW and GW (=TW) was used to assess the facial mucosal contour.

Results

BW decreased significantly from preoperative to 1 year after prosthesis connection with a mean decrease of 0.47 mm (P =0.021) in the control group and a mean decrease of 0.50 mm (P = 0.019) in the test group at the implant platform level. GW increased significantly with a mean increase of 1.37 mm (P =0.005) in the test group at the implant platform level. TW decreased significantly with a mean decrease of 0.46 mm in the control group (P =0.049) but increased significantly with a mean increase of 0.87 mm in the test group (P =0.005) at the implant platform level.

Conclusions

Immediate implant placement with CTG showed a soft tissue gain of 1.37 mm compensated for bone resorption, thus still preserving the preoperative mucosal contour. CTG should be performed with immediate implant placement in cases where preoperative mucosal contours need to be maintained.

Soft tissue replication in single unit implant impressions-A three dimensional clinical study

OBJECTIVE

Comparison of soft tissue replication between conventional and digital impressions for definitive single unit implant rehabilitation in the esthetic zone.

MATERIALS AND METHODS

Six patients were recruited according to inclusion criteria for this cross-over pilot study and submitted to a conventional silicone implant impression with customized coping and a digital impression with an intraoral scanner. Stereolithography files obtained from the same patient were superimposed with appropriate software and trueness evaluated between methods at predetermined locations (56 in hard and soft tissues and 18 in the emergence profile, per patient). Results were presented as mean root mean square (RMS) ± 95% confidence interval and effect size calculated with Hedges' g ± 95%. Mann-Whitney and Kruskal-Wallis were performed when appropriate and α was set at .05.

RESULTS

Trueness between methods equated to 51.08[45.68;56.47] μm and 60.46[52.29;68.62] μm in hard and soft tissues, respectively. Soft tissue replication by intraoral scanner acquisition corresponded to a statistically significant RMS of 243.89[209.15;278.63] μm equating to a Hedges' g of 1.52[1.22;1.82] which corresponded to a large effect size.

CONCLUSIONS

The proposed method could be considered for soft tissues assessment and the results suggest that intraoral impression techniques produce statistically significant changes in peri-implant soft tissue replication, although below the clinically detectable threshold.

CLINICAL SIGNIFICANCE

The proposed technique allows for the 3D determination of peri-implant tissues changes in digital models with higher sensitivity than visual techniques, thus presenting itself as a promising alternative in clinical studies and that the use of an intraoral scanner obtained significant differences in the soft tissue emergence profile replication when compared with the gold standard.

Ratio between Height and Thickness of the Buccal Tissues: A Pilot Study on 32 Single Implants

BACKGROUND

Previous studies have suggested that mucosal height is related to the bone level and soft tissue thickness. The purpose of this pilot study was to investigate the ratio between the height and width of the tissues around single implants with a conical connection and platform switching.

METHODS

All patients receiving single implants (Anyridge^®, MegaGen, Gyeongbuk, South Korea) and restored with single crowns, in a three-month period, were included in this study. After a provisionalization of 12 months, precision impressions were taken and stone casts were poured for measurements. For each implant, two values were collected at the buccal site: the mucosal height (MH), calculated from the vestibular shoulder of the implant to the upper gingival margin of the supra-implant tissue; and the mucosal thickness (MT), calculated from the vestibular shoulder of the analogue to the external mucosa point perpendicular to the implant major axis. Mean, standard deviation (SD), and confidence intervals (CI 95%) for MH and MT, as well as their ratios, were calculated. Correlation between MH and MT was assessed by Pearson's correlation coefficient, with significance level set at 0.05.

RESULTS

32 single Anyridge^® implants were eligible for this evaluation. The mean MH was 3.44 mm (±1.28), the mean MT was 3.29 (±1.46). The average of the ratio between MH and MT of the supra-implant mucosa was therefore 1:1.19 (±0.55). The relation between MH and MT was statistically significant at p ≤ 0.01 (Pearson two-tailed 95% CI).

CONCLUSIONS

Our study found a constant relationship between width and height of the peri-implant mucosa. However, our results are different from those of Nozawa et al., who found a ratio of 1:1.5 between height and thickness of the peri-implant tissues. This may be determined by the different sample and follow-up period, as well as by the implants used in our study.

The Root Membrane Technique: A Retrospective Clinical Study With Up to 10 Years of Follow-Up

PURPOSE

Immediate implant placement in conjunction with intentional root retention is a recently introduced technique, but the majority of existing documentation is limited to short-term reports with low level of evidence. Hence, the aim of this study was to document the long-term clinical and radiographic results of the root membrane technique.

METHODS

This retrospective study reports on clinical results of the root membrane technique for periodontal ligament-mediated immediate implant placement with up to 10 years of follow-up from 3 private dental practices. Anterior implants placed with immediate loading from January 2006 to December 2016 were assessed. Kaplan-Meier estimators were computed for reporting of implant success and survival.

RESULTS

A sample of 182 patients (82 men and 100 women, age range: 18-83 years) received 250 immediate implants (230 maxilla, 20 mandible) after the root membrane concept and followed-up for a mean of 49.94 months (±32.5). Overall, 5 implant failures were recorded for a 10-year cumulative patient-level implant survival rate of 96.5%. Considering mechanical and biological complications, the 10-year cumulative implant success rate was 87.9%.

CONCLUSIONS

Within the limits of the retrospective design, the root membrane technique showed long-term success rates comparable to those of conventional immediate implants.

Comparative Study between a Novel In Vivo Method and CBCT for Assessment of Ridge Alterations after Socket Preservation-Pilot Study

The aim of this study was to compare two different methods for evaluation of alveolar bone resorption after the socket preservation procedure. In the current study, 9 patients with a total of nine teeth indicated for extraction were included. Patients received alveolar ridge preservation with allograft (BoneAlbumin™, OrthoSera Dental, Gyor, Hungary) or Platelet-Rich fibrin (PRF). CBCT (Planmeca ProMax 3D, Helsinki, Finland), was taken at 1 week and 4 months after the socket preservation procedure. A 3D scan, obtained with Trios (3Shape, Copenhagen, Denmark) of the alveolar bone of the surgical site and the adjacent teeth at the place of extraction was performed during the surgical procedure, immediately after the graft placement in the alveolar socket, and after 4 months. Virtual study models were generated using the three-dimensional file processing software "Meshlab" (ISTI-CNR Rome Italy). The changes of alveolar height and width were measured and analyzed. Results were taken from both methods. Radiographic examination revealed that the average value of horizontal resorption is 0.6⁻2.4 mm, and vertical resorption is 0.46⁻2.8 mm. On virtual models, the average value for horizontal resorption is 1.92⁻3.64 mm, the vertical resorption value is 0.95⁻2.10 mm. The Trios intraoral scan can provide non-invasive and more accurate quantitative insights into the dimensional changes in the alveolar ridge after the bone remodeling process. More research is needed for verification of these results.

The Modified Socket Shield Technique

OBJECTIVE

In the anterior regions, the resorption of the buccal bone after tooth extraction leads to a contraction of the overlying soft tissues, resulting in an esthetic problem, particularly with immediate implant placement. In the socket shield technique, the buccal root section of the tooth is maintained, to preserve the buccal bone for immediate implant placement. The aim of this prospective study was to investigate the survival, stability, and complication rates of implants placed using a "modified" socket shield technique.

METHODS

Over a 2-year period, all patients referred to a dental clinic for treatment with oral implants were considered for inclusion in this study. Inclusion criteria were healthy adult patients who presented nonrestorable single teeth with intact buccal periodontal tissues in the anterior regions of both jaws. Exclusion criteria were teeth with present/past periodontal disease, vertical root fractures on the buccal aspect, horizontal fractures below bone level, and external/internal resorptions. The buccal portion of the root was retained to prevent the resorption of the buccal bone; the shield was 1.5 mm thick with the most coronal portion at the bone crest level. All patients then underwent immediate implants. In the patient with a gap between the implant and shield, no graft material was placed. All implants were immediately restored with single crowns and followed for 1 year. The main outcomes were implant survival, stability, and complications.

RESULTS

Thirty patients (15 males, 15 females; mean age was 48.2 ± 15.0 years) were enrolled in the study and installed with 40 immediate implants. After 1 year, all implants were functioning, for a survival rate of 100%; excellent implant stability was reported (mean implant stability quotient at placement: 72.9 ± 5.9; after 1 year: 74.6 ± 2.7). No biologic complications were reported, and the incidence of prosthetic complications was low (2.5%).

CONCLUSIONS

The "modified" socket shield technique seems to be a successful procedure when combined with immediate implant placement, because the root fragment does not interfere with osseointegration and may be beneficial for the esthetics, protecting the buccal bone from resorption.

Reproducibility of a Digital Method to Evaluate Soft Tissue Modifications: A study of Inter and Intra-Operative Measurement Concordance

Background:

The soft tissue healing and quality around dental implant is a current debated topic in the recent literature. The free gingival margin and the quantity and quality of the mucosa around teeth and surrounding dental implants still determine the hard and soft tissue healing status.

Objective:

The aim of this study is to assess inter and intra-operative measurement concordance of a method aimed at evaluating the apico-coronal migration of free gingival margin, using intra-oral photography.

Methods:

The method was tested on peri-implant tissues that were treated with a connective tissue graft on the second stage surgery. Thirty-eight measurements on 13 implants in 8 patients were recorded. An intra-oral photograph was taken for the graft and the provisional crown, which enclosed a circular landmark with a previously determined diameter. The landmark was prepared with a red-resin by the same technician. Before crown cementation, the landmark was calibrated with a digital calibrator by the main investigator, to determine the precise diameter up to two decimal numbers.

Results:

On the intra-oral photograph, the distance was measured from the most apical point of the determined landmark to the zenith of the gingiva, using an image-processing program designed for scientific multidimensional images (Image J). Three independent examiners took these measurements.

Conclusion:

The main advantage of the present non-invasive technique is that the spatial plane of the prosthetic landmarks is the same of the tooth unlike the utilization of periodontal probe, which is generally positioned on different plans in the space (generally more vestibular).

Immediate Loading of Single Implants in the Anterior Maxilla: A 1-Year Prospective Clinical Study on 34 Patients

Purpose

To present the outcomes of immediately loaded single implants placed in the anterior maxilla.

Methods

Over a 2-year period, all patients referred to a private clinic were considered for enrolment in this study. Inclusion criteria were single-tooth placement in postextraction sockets or healed sites of the anterior maxilla. All implants were immediately loaded and followed for a period of 1 year after the placement of definitive crowns. The outcome measures were implant stability, survival, and success.

Results

34 patients were selected and 43 tapered implants with a knife-edge thread design and a nanostructured, calcium-incorporated surface (Anyridge®, Megagen, Gyeongsang, Korea) were installed. Two implants were not sufficiently stable at placement (ISQ < 60) and were considered failed for immediate loading; 41 implants had an ISQ ≥ 60 at placement and were immediately loaded. One year after the placement of definitive crowns, no implant failures were reported, for a survival rate of 100%. No biological complications were found, but 2 implants had their prosthetic abutments loosened: the implant success rate was 95.2%.

Conclusions

In the present study on the immediate loading of single implants in the anterior maxilla, positive outcomes were reported, with high survival (100%) and success (95.2%) rates (the present study has been registered in the ISRCTN registry, a publicly available trial register recognized by WHO and ICMJE, with number ISRCTN12935478).

Fixed Full Arches Supported by Tapered Implants with Knife-Edge Thread Design and Nanostructured, Calcium-Incorporated Surface: A Short-Term Prospective Clinical Study

Purpose. To evaluate implant survival, peri-implant bone loss, and complications affecting fixed full-arch (FFA) restorations supported by implants with a knife-edge thread design and nanostructured, calcium-incorporated surface. Methods. Between January 2013 and December 2015, all patients referred for implant-supported FFA restorations were considered for enrollment in this study. All patients received implants with a knife-edge thread design and nanostructured calcium-incorporated surface (Anyridge®, Megagen, South Korea) were restored with FFA restorations and enrolled in a recall program. The final outcomes were implant survival, peri-implant bone loss, biologic/prosthetic complications, and “complication-free” survival of restorations. Results. Twenty-four patients were selected. Overall, 215 implants were inserted (130 maxilla, 85 mandible), 144 in extraction sockets and 71 in healed ridges. Thirty-six FFAs were delivered (21 maxilla, 15 mandible): 27 were immediately loaded and 9 were conventionally loaded. The follow-up ranged from 1 to 3 years. Two fixtures failed, yielding an implant survival rate of 95.9% (patient-based). A few complications were registered, for a “complication-free” survival of restorations of 88.9%. Conclusions. FFA restorations supported by implants with a knife-edge thread design and nanostructured, calcium-incorporated surface are successful in the short term, with high survival and low complication rates; long-term studies are needed to confirm these outcomes.

Early Bone Formation around Immediately Loaded Transitional Implants Inserted in the Human Posterior Maxilla: The Effects of Fixture Design and Surface

Aim. To evaluate the effects of fixture design and surface on the early bone formation around immediately loaded implants inserted in the human posterior maxilla. Materials and Methods. Ten totally edentulous subjects received two transitional implants: one tapered implant with knife-edge threads/nanostructured calcium-incorporated surface (test: Anyridge®, Megagen, Gyeongbuk, South Korea) and one cylindrical implant with self-tapping threads/sandblasted surface (control: EZPlus®, Megagen). The implants were placed according to a split-mouth design and immediately loaded to support an interim complete denture; after 8 weeks, they were removed for histologic/histomorphometric analysis. The bone-to-implant contact (BIC%) and the bone density (BD%) were calculated. The Wilcoxon test was used to evaluate the differences. Results. With test implants, a mean BIC% and BD% of 35.9 (±9.1) and 31.8 (±7.5) were found. With control implants, a mean BIC% and BD% of 29.9 (±7.6) and 32.5 (±3.9) were found. The mean BIC% was higher with test implants, but this difference was not significant (p = 0.16). Similar BD% were found in the two groups (p = 0.9). Conclusions. In the posterior maxilla, under immediate loading conditions, implants with a knife-edge thread design/nanostructured calcium-incorporated surface seem to increase the peri-implant endosseous healing properties, when compared to implants with self-tapping thread design/sandblasted surface.

Early bone formation around immediately loaded implants with nanostructured calcium-incorporated and machined surface: a randomized, controlled histologic and histomorphometric study in the human posterior maxilla

OBJECTIVE

The aim of this randomized, controlled histologic/histomorphometric study was to compare the early bone formation around immediately loaded implants with nanostructured calcium-incorporated (NCI) and machined (MA) surface, placed in the human posterior maxilla.

MATERIALS AND METHODS

Fifteen fully edentulous patients (six males; nine females; mean age 57.9 ± 6.7 years) were selected for this study. Each patient was installed with two temporary transmucosal implants, with different surfaces: one NCI (test) and one MA (control) implant. All temporary implants were placed in the posterior maxilla, according to a split-mouth design, to help to support an interim complete maxillary denture. After 8 weeks, all temporary transmucosal implants were retrieved for histologic/histomorphometric evaluation. The bone-to-implant contact (BIC%) and the bone density (BD%) were calculated. The Wilcoxon matched-pairs signed-rank test was used to evaluate differences (BIC%, BD%) between the surfaces. The level of significance was set at 0.05.

RESULTS

Eight weeks after placement, 24 clinically stable implants (12 test, 12 control) were subjected to histologic/histomorphometric evaluation. In the MA implants, the histomorphometric evaluation revealed a mean BIC(±SD)% and BD(±SD)% of 21.2(±4.9)% and 29.8(±7.8)%, respectively. In the NCI implants, the histomorphometric analysis revealed a mean BIC(±SD)% and BD(±SD)% of 39.7(±8.7)% and 34.6(±7.2)%, respectively. A statistically significant difference was found between the two surfaces with regard to BIC% (p < 0.001), while no significant difference was found with regard to BD% (p = 0.09).

CONCLUSIONS

The NCI surface seems to increase the peri-implant endosseous healing properties in the native bone of the posterior maxilla, under immediate loading conditions, when compared with the MA surface.

CLINICAL RELEVANCE

Under immediate loading conditions in the human posterior maxilla, the nanostructured calcium-incorporated surface has led to better histologic and histomorphometric results than the machined surface; therefore, the clinical use of implants with nanostructured calcium-incorporated surface may be beneficial in the posterior maxilla, under immediate loading protocol.