Preferential Lineage-Specific Differentiation of Osteoblast-Derived Induced Pluripotent Stem Cells into Osteoprogenitors. Stem Cells Int. 2017;2017:1513281. [PMID: 28250775 PMCID: PMC5303871 DOI: 10.1155/2017/1513281]

Pluripotent stem cells for skeletal tissue engineering

Here, we review the use of human pluripotent stem cells for skeletal tissue engineering. A number of approaches have been used for generating cartilage and bone from both human embryonic stem cells and induced pluripotent stem cells. These range from protocols relying on intrinsic cell interactions and signals from co-cultured cells to those attempting to recapitulate the series of steps occurring during mammalian skeletal development. The importance of generating authentic tissues rather than just differentiated cells is emphasized and enabling technologies for doing this are reported. We also review the different methods for characterization of skeletal cells and constructs at the tissue and single-cell level, and indicate newer resources not yet fully utilized in this field. There have been many challenges in this research area but the technologies to overcome these are beginning to appear, often adopted from related fields. This makes it more likely that cost-effective and efficacious human pluripotent stem cell-engineered constructs may become available for skeletal repair in the near future.

Simulated confluence on micropatterned substrates correlates responses regulating cellular differentiation

While cells are known to behave differently based on the size of micropatterned islands and is thought to be related to cell size and cell-cell contacts, the exact threshold for this difference between small and large islands is unknown. Furthermore, while cell size and cell-cell contacts can be easily manipulated on small islands, they are harder to measure and continually monitor on larger islands. To investigate this size threshold, and to explore cell size, cell-cell contacts, and differentiation, we use a previously established simulation to plan experiments and explain results that we could not explain from experiments alone. We use five seeding densities covering three orders of magnitude over 25-500 µm diameter islands to examine markers of proliferation and differentiation in bone marrow derived mesenchymal cells (cell line). We show that osteogenic markers are most accurately described as a function of confluence for larger islands, but a function of time for smaller islands. We further show, using results of the simulation, that cell size and cell-cell contacts are also related to confluence on larger islands, but only cell-cell contacts are related to confluence on small islands. This work uses simulations to explain experimental results that could not be explained from experiments alone. Together, the simulations and experiments in this work show different differentiation patterns on large and small islands, and this simulation may be useful in planning future studies related to this work. This article is protected by copyright. All rights reserved.

A Review of Recent Advances in 3D Bioprinting With an Eye on Future Regenerative Therapies in Veterinary Medicine

3D bioprinting is a rapidly evolving industry that has been utilized for a variety of biomedical applications. It differs from traditional 3D printing in that it utilizes bioinks comprised of cells and other biomaterials to allow for the generation of complex functional tissues. Bioprinting involves computational modeling, bioink preparation, bioink deposition, and subsequent maturation of printed products; it is an intricate process where bioink composition, bioprinting approach, and bioprinter type must be considered during construct development. This technology has already found success in human studies, where a variety of functional tissues have been generated for both in vitro and in vivo applications. Although the main driving force behind innovation in 3D bioprinting has been utility in human medicine, recent efforts investigating its veterinary application have begun to emerge. To date, 3D bioprinting has been utilized to create bone, cardiovascular, cartilage, corneal and neural constructs in animal species. Furthermore, the use of animal-derived cells and various animal models in human research have provided additional information regarding its capacity for veterinary translation. While these studies have produced some promising results, technological limitations as well as ethical and regulatory challenges have impeded clinical acceptance. This article reviews the current understanding of 3D bioprinting technology and its recent advancements with a focus on recent successes and future translation in veterinary medicine.

Inducing human induced pluripotent stem cell differentiation through embryoid bodies: A practical and stable approach

Human induced pluripotent stem cells (hiPSCs) are invaluable resources for producing high-quality differentiated cells in unlimited quantities for both basic research and clinical use. They are particularly useful for studying human disease mechanisms in vitro by making it possible to circumvent the ethical issues of human embryonic stem cell research. However, significant limitations exist when using conventional flat culturing methods especially concerning cell expansion, differentiation efficiency, stability maintenance and multicellular 3D structure establishment, differentiation prediction. Embryoid bodies (EBs), the multicellular aggregates spontaneously generated from iPSCs in the suspension system, might help to address these issues. Due to the unique microenvironment and cell communication in EB structure that a 2D culture system cannot achieve, EBs have been widely applied in hiPSC-derived differentiation and show significant advantages especially in scaling up culturing, differentiation efficiency enhancement, ex vivo simulation, and organoid establishment. EBs can potentially also be used in early prediction of iPSC differentiation capability. To improve the stability and feasibility of EB-mediated differentiation and generate high quality EBs, critical factors including iPSC pluripotency maintenance, generation of uniform morphology using micro-pattern 3D culture systems, proper cellular density inoculation, and EB size control are discussed on the basis of both published data and our own laboratory experiences. Collectively, the production of a large quantity of homogeneous EBs with high quality is important for the stability and feasibility of many PSCs related studies.

Induced pluripotent stem cells reprogrammed from primary dendritic cells provide an abundant source of immunostimulatory dendritic cells for use in immunotherapy

Cell types differentiated from induced pluripotent stem cells (iPSCs) are frequently arrested in their development program, more closely resembling a fetal rather than an adult phenotype, potentially limiting their utility for downstream clinical applications. The fetal phenotype of iPSC‐derived dendritic cells (ipDCs) is evidenced by their low expression of MHC class II and costimulatory molecules, impaired secretion of IL‐12, and poor responsiveness to conventional maturation stimuli, undermining their use for applications such as immune‐oncology. Given that iPSCs display an epigenetic memory of the cell type from which they were originally derived, we investigated the feasibility of reprogramming adult DCs to pluripotency to determine the impact on the phenotype and function of ipDCs differentiated from them. Using murine bone marrow‐derived DCs (bmDCs) as proof of principle, we show here that immature DCs are tractable candidates for reprogramming using non‐integrating Sendai virus for the delivery of Oct4, Sox2, Klf4, and c‐Myc transcription factors. Reprogramming efficiency of DCs was lower than mouse embryonic fibroblasts (MEFs) and highly dependent on their maturation status. Although control iPSCs derived from conventional MEFs yielded DCs that displayed a predictable fetal phenotype and impaired immunostimulatory capacity in vitro and in vivo, DCs differentiated from DC‐derived iPSCs exhibited a surface phenotype, immunostimulatory capacity, and responsiveness to maturation stimuli indistinguishable from the source DCs, a phenotype that was retained for 15 passages of the parent iPSCs. Our results suggest that the epigenetic memory of iPSCs may be productively exploited for the generation of potently immunogenic DCs for immunotherapeutic applications.

Regulation of the tenogenic gene expression in equine tenocyte-derived induced pluripotent stem cells by mechanical loading and Mohawk

Cell-based therapeutic strategies afford major potential advantages in the repair of injured tendons. Generation of induced pluripotent stem cells (iPSCs) expands cell sources for “regenerative” therapy. However, its application in tendon repair is still limited and the effects remain unclear. In this study, equine tenocyte-derived iPSCs (teno-iPSCs) were generated by expressing four Yamanaka factors. Compared to parental tenocytes and bone marrow derived mesenchymal stem cells (BMSCs), the transcriptional activities of lineage-specific genes, including Mkx, Col1A2, Col14, DCN, ELN, FMOD, and TNC, were highly repressed in the resulting teno-iPSCs. Exposure to cyclic uniaxial mechanical loading increased the expression of Scx, Egr1, Col1A2, DCN, and TNC in teno-iPSCs and the expression of Scx, Egr1, DCN, and TNC in BMSCs. Reintroduction of tenogenic transcription factor Mohawk (Mkx) upregulated the expression of DCN in teno-iPSCs and the expression of Scx, Col14, and FMOD in BMSCs. Mechanical loading combined with ectopic expression of equine Mkx further enhanced the expression of Egr1, Col1A2, DCN, and TNC in teno-iPSCs and the expression of Scx, Egr1, and TNC in BMSCs. These data suggest that the repressed lineage-specific genes in the teno-iPSCs can be re-activated by mechanical loading and ectopic expression of Mkx. Our findings offer new insights into the application of iPSCs for basic and clinic research in tendon repair.

Early onset preeclampsia in a model for human placental trophoblast

Preeclampsia, a leading cause of maternal and perinatal morbidity and mortality worldwide, is accompanied by shallow placentation and deficient remodeling of the uterine spiral arteries by invasive placental trophoblast cells during the first trimester of pregnancy. Here, we generated induced pluripotent stem cells from umbilical cords of normal pregnancies and ones complicated by early onset preeclampsia (EOPE) and converted them to trophoblast to recapitulate events of early pregnancy. Parameters disturbed in EOPE, including trophoblast invasiveness, were assessed. Under low O₂, both sets of cells behaved similarly, but, under the more stressful 20% O₂ conditions, the invasiveness of EOPE trophoblast was markedly reduced. Gene expression changes in EOPE trophoblast suggested a dysregulation invasion linked to high O₂.

We describe a model for early onset preeclampsia (EOPE) that uses induced pluripotent stem cells (iPSCs) generated from umbilical cords of EOPE and control (CTL) pregnancies. These iPSCs were then converted to placental trophoblast (TB) representative of early pregnancy. Marker gene analysis indicated that both sets of cells differentiated at comparable rates. The cells were tested for parameters disturbed in EOPE, including invasive potential. Under 5% O₂, CTL TB and EOPE TB lines did not differ, but, under hyperoxia (20% O₂), invasiveness of EOPE TB was reduced. RNA sequencing analysis disclosed no consistent differences in expression of individual genes between EOPE TB and CTL TB under 20% O₂, but, a weighted correlation network analysis revealed two gene modules (CTL4 and CTL9) that, in CTL TB, were significantly linked to extent of TB invasion. CTL9, which was positively correlated with 20% O₂ (P = 0.02) and negatively correlated with invasion (P = 0.03), was enriched for gene ontology terms relating to cell adhesion and migration, angiogenesis, preeclampsia, and stress. Two EOPE TB modules, EOPE1 and EOPE2, also correlated positively and negatively, respectively, with 20% O₂ conditions, but only weakly with invasion; they largely contained the same sets of genes present in modules CTL4 and CTL9. Our experiments suggest that, in EOPE, the initial step precipitating disease is a reduced capacity of placental TB to invade caused by a dysregulation of O₂ response mechanisms and that EOPE is a syndrome, in which unbalanced expression of various combinations of genes affecting TB invasion provoke disease onset.

Reprogramming of Mouse Calvarial Osteoblasts into Induced Pluripotent Stem Cells

Previous studies have demonstrated the ability of reprogramming endochondral bone into induced pluripotent stem (iPS) cells, but whether similar phenomenon occurs in intramembranous bone remains to be determined. Here we adopted fluorescence-activated cell sorting-based strategy to isolate homogenous population of intramembranous calvarial osteoblasts from newborn transgenic mice carrying both Osx1-GFP::Cre and Oct4-EGFP transgenes. Following retroviral transduction of Yamanaka factors (Oct4, Sox2, Klf4, and c-Myc), enriched population of osteoblasts underwent silencing of Osx1-GFP::Cre expression at early stage of reprogramming followed by late activation of Oct4-EGFP expression in the resulting iPS cells. These osteoblast-derived iPS cells exhibited gene expression profiles akin to embryonic stem cells and were pluripotent as demonstrated by their ability to form teratomas comprising tissues from all germ layers and also contribute to tail tissue in chimera embryos. These data demonstrate that iPS cells can be generated from intramembranous osteoblasts.

Cell viability assessed in a reproducible model of human osteoblasts derived from human adipose-derived stem cells

Human adipose tissue-derived stem cells (hASCs) have been subjected to extensive investigation because of their self-renewal properties and potential to restore damaged tissues. In the literature, there are several protocols for differentiating hASCs into osteoblasts, but there is no report on the control of cell viability during this process. In this study, we used osteoblasts derived from hASCs of patients undergoing abdominoplasty. The cells were observed at the beginning and end of bone matrix formation, and the expression of proteins involved in this process, including alkaline phosphatase and osteocalcin, was assessed. RANKL, Osterix, Runx2, Collagen3A1, Osteopontin and BSP expression levels were analyzed using real-time PCR, in addition to a quantitative assessment of protein levels of the markers CD45, CD105, STRO-1, and Nanog, using immunofluorescence. Rhodamine (Rho123), cytochrome-c, caspase-3, P-27, cyclin D1, and autophagy cell markers were analyzed by flow cytometry to demonstrate potential cellular activity and the absence of apoptotic and tumor cell processes before and after cell differentiation. The formation of bone matrix, along with calcium nodules, was observed after 16 days of osteoinduction. The gene expression levels of RANKL, Osterix, Runx2, Collagen3A1, Osteopontin, BSP and alkaline phosphatase activity were also elevated after 16 days of osteoinduction, whereas the level of osteocalcin was higher after 21 days of osteoinduction. Our data also showed that the cells had a high mitochondrial membrane potential and a low expression of apoptotic and tumor markers, both before and after differentiation. Cells were viable after the different phases of differentiation. This proposed methodology, using markers to evaluate cell viability, is therefore successful in assessing different phases of stem cell isolation and differentiation.

Sequential transfection of RUNX2/SP7 and ATF4 coated onto dexamethasone-loaded nanospheresenhances osteogenesis

The timing of gene transfection greatly influences stem cell differentiation. Sequential transfection is crucial for regulation of cell behavior. When transfected several days after differentiation initiation, genes expressed at the late stage of differentiation can regulate cell behaviors and functions. To determine the optimal timing of key gene delivery, we sequentially transfected human mesenchymal stem cells (hMSCs). This method can easily control osteogenesis of stem cells. hMSCs were first transfected with RUNX2 and SP7 using poly(lactic-co-glycolic acid) nanoparticles to induce osteogenesis, and then with ATF4 after 5, 7, and 14 days. Prior to transfecting hMSCs with all three genes, each gene was individually transfected and its expression was monitored. Transfection of these genes was confirmed by RT-PCR, Western blotting, and confocal microscopy. The pDNAs entered the nuclei of hMSCs, and RUNX2 and SP7 proteins were translated and triggered osteogenesis. Second, the ATF4 gene was delivered when cells were at the pre-osteoblasts stage. To induce the osteogenesis of hMSCs, the optimal timing of ATF4 gene delivery was 14 days after RUNX2/SP7 transfection. Experiments in 2- and 3-dimensional culture systems confirmed that transfection of ATF4 at 14 days after RUNX2/SP7 promoted osteogenic differentiation of hMSCs.

Hypoxia-inducible factor 1Α may regulate the commitment of mesenchymal stromal cells toward angio-osteogenesis by mirna-675-5P

BACKGROUND AIMS

During bone formation, angiogenesis and osteogenesis are regulated by hypoxia, which is able to induce blood vessel formation, as well as recruit and differentiate human mesenchymal stromal cells (hMSCs). The molecular mechanisms involved in HIF-1α response and hMSC differentiation during bone formation are still unclear. This study aimed to investigate the synergistic role of hypoxia and hypoxia-mimetic microRNA miR-675-5p in angiogenesis response and osteo-chondroblast commitment of hMSCs.

METHODS

By using a suitable in vitro cell model of hMSCs (maintained in hypoxia or normoxia), the role of HIF-1α and miR-675-5p in angiogenesis and osteogenesis coupling was investigated, using fluorescence-activated cell sorting (FACS), gene expression and protein analysis.

RESULTS

Hypoxia induced miR-675-5p expression and a hypoxia-angiogenic response, as demonstrated by increase in vascular endothelial growth factor messenger RNA and protein release. MiR-675-5p overexpression in normoxia promoted the down-regulation of MSC markers and the up-regulation of osteoblast and chondroblast markers, as demonstrated by FACS and protein analysis. Moreover, miR-675-5p depletion in a low-oxygen condition partially abolished the hypoxic response, including angiogenesis, and in particular restored the MSC phenotype, demonstrated by cytofluorimetric analysis. In addition, current preliminary data suggest that the expression of miR-675-5p during hypoxia plays an additive role in sustaining Wnt/β-catenin pathways and the related commitment of hMSCs during bone ossification.

DISCUSSION

MiR-675-5p may trigger complex molecular mechanisms that promote hMSC osteoblastic differentiation through a dual strategy: increasing HIF-1α response and activating Wnt/β-catenin signaling.