Multifunctional Composite Materials Based on Anion Exchangers Modified with Copper Compounds-A Review of Their Synthesis Methods, Characteristics and Applications

As copper and its compounds are of fundamental importance for the development of innovative materials, the synthesis of composites intended for water purification was undertaken in which submicron copper containing particles were dispersed within the matrix of a strongly basic anion exchanger, with a macroporous and gel-like structure. Due to their trimethylammonium functional groups, the host materials alone exhibited an affinity to anionic water contaminants and antimicrobial properties. The introduction of such particles as CuO, Cu2O, metallic Cu, CuO/FeO(OH), Cu4O3, Cu(OH)2, Cu4(OH)6SO4, Cu2(OH)3Cl increased these properties and demonstrated new properties. The composites were obtained unconventionally, in ambient conditions, using eco-friendly reagents. Alternative synthesis methods were compared and optimized, as a result of which a new group of hybrid ion exchangers was created (HIXs) containing 3.5-12.5 wt% of Cu. As the arrangement of the inorganic phase in the resin matrix was atypical, i.e., close to the surface of the beads, the obtained HIXs exhibited excellent kinetic properties in the process of oxidation and adsorption of As(III), as well as catalytic properties for the synthesis of triazoles via click reaction, and also antimicrobial properties in relation to Gram-positive Enterococcus faecalis and Gram-negative Pseudomonas aeruginosa and Escherichia coli, preventing biofilm formation. Using thermogravimetry, the effect of the inorganic phase on decomposition of the polymeric phase was evaluated for the first time and comprehensively, confirming the relationship and finding numerous regularities. It was also found that, depending on the oxidation state (CuO, Cu2O, Cu), copper-containing particles affected the textural properties of the polymeric phase endowing a tighter structure, limiting the porosity and reducing the affinity for water.

Copper Rich Composite Materials Based on Carboxylic Cation Exchangers and Their Thermal Transformation

The effect of a cupric deposit (Cu2+, CuO) on the thermal decomposition of carboxylic cation exchangers (CCEs) is not known, and such studies may have practical significance. CCEs have a very high ion exchange capacity, so an exceptionally large amount of CuO (which is a catalyst) can be precipitated inside them. Two CCEs, macroreticular (Amberlite IRC50) and gel-like (Amberlite IRC86), served as a polymeric support to obtain copper-rich hybrid ion exchangers. Composites with CuO particles inside a polyacrylic matrix (up to 35.0 wt% Cu) were obtained. Thermal analyses under air and under N2 were performed for CCEs in the H+ and Cu2+ form with and without a CuO deposit. The results of sixteen experiments are discussed based on the TG/DTG curves and XRD patterns of the solid residues. Under air, the cupric deposit shifted the particular transformations and the ultimate polymeric matter decomposition (combustion) toward lower temperatures (even about 100-150 °C). Under N2, the reduction of the cupric deposit to metallic copper took place. Unique composite materials enriched in carbonaceous matter were obtained, as the products of polymeric matrix decomposition (free radicals and hydrogen) created an additional amount of carbon char due to the utilization of a certain amount of hydrogen to reduce Cu (II) to Cu0.

Cu(II)-Fe(III) oxide doped anion exchangers - Multifunctional composites for arsenite removal from water via As(III) adsorption and oxidation

The aim of the present study was to investigate As(III) oxidation and adsorption on the surface of hybrid anion exchangers containing Cu(II)-Fe(III) binary oxide deposited in their porous structure with the same Cu:Fe ratio of 1:2 but with different amounts and distribution of inorganic deposit within polymeric beads. The equilibrium studies confirmed high adsorption capacity of the best hybrid polymer: 94.4 mg As/g. Moreover, the adsorption was effective over a wide pH range, selective in the presence of interfering ions, and the material was effectively regenerated. The performance of the hybrid polymer was also confirmed in the column process which enabled both As(III) and As(V) concentrations to be lowered from 500 μg/L to below 10.0 μg/L in a solution with a composition similar to natural groundwater. The breakthrough point of the bed was reached after the solution amounting to 1833 bed volumes passed through the column. Desorbed As speciation, FTIR and XPS studies showed that As(III) was mainly adsorbed on the surface of Cu-Fe oxides followed by its oxidation to As(V). In the oxidation reaction metal oxides acted as catalysts and adsorbents, while the oxidant was probably oxygen dissolved in solution.