Study on the effect of wet scrubbing technique on emissions in a dual fuel engine operating with diesel and hydrogen

Reducing emissions from internal combustion (IC) engines is a crucial goal, encompassing nitrogen oxide (NO), hydrocarbon (HC), carbon monoxide (CO), and smoke. To enhance both performance and emissions, contemporary IC engines have turned to alternative gases such as hydrogen (H2) and exhaust after-treatment systems. A promising method to effectively decrease exhaust emissions entails the application of the scrubber technique as an exhaust gas after-treatment. This study's objective is to explore two avenues for curtailing exhaust emissions. The first involves substituting traditional fuels in IC engines with hydrogen gas (H2) at a flow rate of 6 LPM. The second entails integrating a liquid chemical solution into the scrubber technique. Notably, the utilization of KMnO4 solutions exhibits an appreciable reduction in NO and CO emissions compared to solutions containing NaOH. The experimental process included two aspects: investigating hydrogen fuel (H2) as an alternative fuel for IC engines and incorporating a scrubber technique using both KMnO4 and NaOH solutions. These experiments were conducted using a single-cylinder engine with a power output of 5.2 kW, cooled by water. The engine underwent tests under various load conditions, spanning from minimal to maximal loads. The findings revealed that employing KMnO4 solutions within the scrubber technique led to reductions of 25% and 40% in NO and CO emissions, respectively, in contrast to the utilization of NaOH solutions. Similarly, introduction hydrogen gas also has a significant effect on emission reduction.

A Novel Method for Simultaneous Removal of NO and SO2 from Marine Exhaust Gas via In-Site Combination of Ozone Oxidation and Wet Scrubbing Absorption

The stringent international regulations on marine emission abatement have exerted a huge push on the development of marine desulfurization and denitrification technologies. However, for the traditional vessels driven by large two-stroke diesel engines, simultaneous removal of NOx and SO2 is still a big challenge at present. Here, a one-stage ozone oxidation combined with in-situ wet scrubbing for simultaneous removal of NO and SO2 is proposed. A series of experiments were performed based on a bench-scale reaction system. The results showed that in-situ wet scrubbing could effectively decrease flue gas temperature, and then suppress the thermal decomposition of ozone, which was beneficial for improve oxidant utilization. Meanwhile, the in-situ combination of ozone injection and wet scrubbing was in favor of improving the selectivity oxidation of NO over SO2 by ozone, which was possibly due to the high aqueous solubility of SO2 in water. Aiming to reduce the electric power consumption by an ozone generating system, O3/NO molar ratio was kept as low as possible. A complete removal of SO2 and a high NOx removal efficiency could be achieved through the introduction of other oxidative additives in scrubbing solution. This integrated system designed for marine application was of great significance.

High Reduction Efficiencies of Adsorbed NOx in Pilot-Scale Aftertreatment Using Nonthermal Plasma in Marine Diesel-Engine Exhaust Gas

An efficient NOx reduction aftertreatment technology for a marine diesel engine that combines nonthermal plasma (NTP) and NOx adsorption/desorption is investigated. The aftertreatment technology can also treat particulate matter using a diesel particulate filter and regenerate it via NTP-induced ozone. In this study, the NOx reduction energy efficiency is investigated. The investigated marine diesel engine generates 1 MW of output power at 100% engine load. NOx reduction is performed by repeating adsorption/desorption processes with NOx adsorbents and NOx reduction using NTP. Considering practical use, experiments are performed for a larger number of cycles compared with our previous study; the amount of adsorbent used is 80 kg. The relationship between the mass of desorbed NOx and the energy efficiency of NOx reduction via NTP is established. This aftertreatment has a high reduction efficiency of 71% via NTP and a high energy efficiency of 115 g(NO2)/kWh for a discharge power of 12.0 kW.

NO Removal from Simulated Diesel Engine Exhaust Gas by Cyclic Scrubbing Using NaClO2 Solution in a Rotating Packed Bed Reactor

Experiments were conducted to remove NO from simulated flue gas in a rotating packed bed (RPB) reactor with NaClO2 as wet scrubbing oxidant and diesel exhaust gas as carrier gas. The effects of various operating parameters (rotational speed, solution pH, NaClO2 concentration, liquid-gas ratio, and NO and SO2 concentrations) on NO removal performance were investigated preliminarily. The results showed that with the increase of rotational speed, oxidant concentration, and liquid-gas ratio, NO removal efficiency increased obviously. NO removal efficiency increased largely with the decrease of solution pH, and a complete removal of NO could be attained at pH 4. NO concentration imposed little effect on NO removal efficiency while coexisting SO2 in exhaust gas could enhance NOx removal greatly.