Towards Optimal Platform-Based Robot Design for Ankle Rehabilitation: The State of the Art and Future Prospects

PedBotLab: A Novel Video Game-Based Robotic Ankle Platform Created for Therapeutic Exercise for Children With Neurological Impairments

AIMS

Assess the potential benefits of using PedBotLab, a clinic based robotic ankle platform with integrated video game software, to improve ankle active and passive range of motion, strength, selective motor control, gait efficiency, and balance.

METHODS

Ten participants with static neurological injuries and independent ambulation participated in a 10-week pilot study (Pro00013680) to assess feasibility and efficacy of PedBotLab as a therapeutic device twice weekly. Isometric ankle strength, passive and active ankle range of motion, plantarflexor spasticity, selective motor control of the lower extremity, balance, and gait speed were measured pre- and post-trial.

RESULTS

Statistically significant improvements were seen in flexibility, active range of motion, and strength in multiple planes of ankle motion. Ankle dorsiflexion with knee flexion and knee extension demonstrated statistically significant results in all outcome measures. No significant changes were observed in gait speed outcomes.

CONCLUSIONS

The use of PedbotLab can lead to improvements in ankle strength, flexibility, and active range of motion for children with static neurological injuries. Future studies aim to evaluate the effect on gait quality and work toward developing a home-based device.

Post-stroke rehabilitation of the ankle joint with a low cost monoarticular ankle robotic exoskeleton: Preliminary results

Introduction: Stroke generates a high rate of disability and, in particular, ankle spasticity is a sequelae that interferes with the execution of daily activities. Robotic devices have been proposed to offer rehabilitation treatments to recover control of ankle muscles and hence to improve gait function. Objective: The aim of this study is to investigate the effects of passive stretching, combined with active and resisted movement, accompanied by visual feedback, by means of playful interactive software using a low-cost monoarticular robot (MEXO) in patients with stroke sequelae and spastic ankle. Methods: An open, uncontrolled, non-randomised, quasi-experimental study of 6 weeks duration has been completed. A protocol has been defined to determine the usability, safety and potential benefits of supplementary treatment with the MEXO interactive system in a group of patients. Nine volunteer patients with sequelae of stroke who met the inclusion criteria were included. They received conventional treatment and in addition also received treatment with the MEXO monoarticular robot three times a week during 6 weeks. Each session consisted of 10 min of passive stretching followed by 20 min of active movement training with visual feedback (10 min active without resistance, 10 min with resistance) and a final phase with 10 min of passive stretching. The following variables were measured pre- and post-treatment: joint range of motion and ankle muscle strength, monopodal balance, muscle tone, gait ability and satisfaction with the use of assistive technology. Results: Statistically significant improvements were obtained in joint range measured by goniometry and in balance measured by monopodal balance test. Also in walking capacity, through the measurement of travelled distance. Discussion and significance: Device usability and patient safety were tested. Patients improved joint range and monopodal balance. The MEXO exoskeleton might be a good alternative for the treatment of spastic ankle joint in people with a stroke sequela.

Design and Experimental Research of 3-RRS Parallel Ankle Rehabilitation Robot

The ankle is a crucial joint that supports the human body weight. An ankle sprain will adversely affect the patient’s daily life, so it is of great significance to ensure its strength. To help patients with ankle dysfunction to carry out effective rehabilitation training, the bone structure and motion mechanism of the ankle were analyzed in this paper. Referring to the configuration of the lower-mobility parallel mechanism, a 3-RRS (R and S denote revolute and spherical joint respectively) parallel ankle rehabilitation robot (PARR) was proposed. The robot can realize both single and compound ankle rehabilitation training. The structure of the robot was introduced, and the kinematics model was established. The freedom of movement of the robot was analyzed using the screw theory, and the robot kinematics were analyzed using spherical analytics theory. A circular composite rehabilitation trajectory was planned, and the accuracy of the kinematics model was verified by virtual prototype simulation. The Multibody simulation results show that the trajectory of the target point is basically the same as the expected trajectory. The maximum trajectory error is about 2.5 mm in the simulation process, which is within the controllable range. The experimental results of the virtual prototype simulation show that the maximum angular deflection error of the three motors is 2° when running a circular trajectory, which meets the experimental requirements. Finally, a control strategy for passive rehabilitation training was designed, and the effectiveness of this control strategy was verified by a prototype experiment.

PedBotHome: A Video Game-Based Robotic Ankle Device Created for Home Exercise in Children With Neurological Impairments

PURPOSE

This pilot study assesses the feasibility of using PedBotHome to promote adherence to a home exercise program, the ability of the device to withstand frequent use, and changes in participant ankle mobility.PedBotHome is a robotic ankle device with integrated video game software designed to improve ankle mobility in children with cerebral palsy.

METHODS

Eight participants enrolled in a 28-day trial of PedBotHome. Ankle strength, range of motion, and plantar flexor spasticity were measured pre- and posttrial. Performance was monitored remotely, and game settings were modified weekly by physical therapists.

RESULTS

Four participants met the study goal of 20 days of use. There were statistically significant improvements in ankle strength, spasticity, and range of motion.

CONCLUSIONS

PedBotHome is a feasible device to engage children with static neurological injuries in ankle home exercise. This pilot study expands the paradigm for future innovative home-based robotic rehabilitation.

Effectiveness of Platform-Based Robot-Assisted Rehabilitation for Musculoskeletal or Neurologic Injuries: A Systematic Review

During the last ten years the use of robotic-assisted rehabilitation has increased significantly. Compared with traditional care, robotic rehabilitation has several potential advantages. Platform-based robotic rehabilitation can help patients recover from musculoskeletal and neurological conditions. Evidence on how platform-based robotic technologies can positively impact on disability recovery is still lacking, and it is unclear which intervention is most effective in individual cases. This systematic review aims to evaluate the effectiveness of platform-based robotic rehabilitation for individuals with musculoskeletal or neurological injuries. Thirty-eight studies met the inclusion criteria and evaluated the efficacy of platform-based rehabilitation robots. Our findings showed that rehabilitation with platform-based robots produced some encouraging results. Among the platform-based robots studied, the VR-based Rutgers Ankle and the Hunova were found to be the most effective robots for the rehabilitation of patients with neurological conditions (stroke, spinal cord injury, Parkinson’s disease) and various musculoskeletal ankle injuries. Our results were drawn mainly from studies with low-level evidence, and we think that our conclusions should be taken with caution to some extent and that further studies are needed to better evaluate the effectiveness of platform-based robotic rehabilitation devices.

A Survey on Design and Control of Lower Extremity Exoskeletons for Bipedal Walking

Exoskeleton robots are electrically, pneumatically, or hydraulically actuated devices that externally support the bones and cartilage of the human body while trying to mimic the human movement capabilities and augment muscle power. The lower extremity exoskeleton device may support specific human joints such as hip, knee, and ankle, or provide support to carry and balance the weight of the full upper body. Their assistive functionality for physically-abled and disabled humans is demanded in medical, industrial, military, safety applications, and other related fields. The vision of humans walking with an exoskeleton without external support is the prospect of the robotics and artificial intelligence working groups. This paper presents a survey on the design and control of lower extremity exoskeletons for bipedal walking. First, a historical view on the development of walking exoskeletons is presented and various lower body exoskeleton designs are categorized in different application areas. Then, these designs are studied from design, modeling, and control viewpoints. Finally, a discussion on future research directions is provided.

Control Design for CABLEankle, a Cable Driven Manipulator for Ankle Motion Assistance

A control design is presented for a cable driven parallel manipulator for performing a controlled motion assistance of a human ankle. Requirements are discussed for a portable, comfortable, and light-weight solution of a wearable device with an overall design with low-cost features and user-oriented operation. The control system utilizes various operational and monitoring sensors to drive the system and also obtain continuous feedback during motion to ensure an effective recovery. This control system for CABLEankle device is designed for both active and passive rehabilitation to facilitate the improvement in both joint mobility and surrounding muscle strength.

Development and Clinical Evaluation of a Novel Foot Stretching Robot that Simultaneously Stretches Plantar Fascia and Achilles Tendon for Treatment of Plantar Fasciitis

OBJECTIVE

This paper presents the development and clinical evaluation of a foot stretching robot that simultaneously stretches the plantar fascia and Achilles tendon for the treatment of plantar fasciitis. The therapeutic effectiveness of the robot and feasibility of using metatarsophalangeal joint stiffness as an indicator of recovery were identified through the clinical evaluations.

METHODS

The robot implements an effective foot stretching protocol through a novel mechanism design that simultaneously stretches the plantar fascia and Achilles tendon using a single motor. Thirty patients with plantar fasciitis and fifteen healthy participants volunteered in the cross-sectional clinical evaluation, and nine patients from the patients group participated in the one-month clinical trial. Four main outcomes (Foot Function Index, Visual Analogue Scale-Foot and Ankle, plantar fascia thickness, and metatarsophalangeal joint stiffness) were used for the clinical evaluations.

RESULTS

In the cross-sectional clinical evaluation, the symptomatic feet of patients showed moderate negative correlation between normalized metatarsophalangeal joint stiffness and plantar fascia thickness with statistical significance. In the one-month clinical trial, all the main outcomes showed significant improvement after using the developed robot. Comparing our results with previous studies also indicated a therapeutic superiority of our robot for treating plantar fasciitis.

CONCLUSION

Our foot stretching robot had significant therapeutic effect on plantar fasciitis, and normalized metatarsophalangeal joint stiffness measured by our robot could be used as a monitoring indicator for recovery from plantar fasciitis.

SIGNIFICANCE

This study contributed to practical issues related to treatment of plantar fasciitis, and our results could be applied to effective treatment of plantar fasciitis and progressive monitoring of recovery.

Robots for Elderly Care in the Home: A Landscape Analysis and Co-Design Toolkit

Over the last two decades, several deployments of robots for in-house assistance of older adults have been trialled. However, these solutions are mostly prototypes and remain unused in real-life scenarios. In this work, we review the historical and current landscape of the field, to try and understand why robots have yet to succeed as personal assistants in daily life. Our analysis focuses on two complementary aspects: the capabilities of the physical platform and the logic of the deployment. The former analysis shows regularities in hardware configurations and functionalities, leading to the definition of a set of six application-level capabilities (exploration, identification, remote control, communication, manipulation, and digital situatedness). The latter focuses on the impact of robots on the daily life of users and categorises the deployment of robots for healthcare interventions using three types of services: support, mitigation, and response. Our investigation reveals that the value of healthcare interventions is limited by a stagnation of functionalities and a disconnection between the robotic platform and the design of the intervention. To address this issue, we propose a novel co-design toolkit, which uses an ecological framework for robot interventions in the healthcare domain. Our approach connects robot capabilities with known geriatric factors, to create a holistic view encompassing both the physical platform and the logic of the deployment. As a case study-based validation, we discuss the use of the toolkit in the pre-design of the robotic platform for an pilot intervention, part of the EU large-scale pilot of the EU H2020 GATEKEEPER project.

State of the art in parallel ankle rehabilitation robot: a systematic review

Background

The ankle joint complex (AJC) is of fundamental importance for balance, support, and propulsion. However, it is particularly susceptible to musculoskeletal and neurological injuries, especially neurological injuries such as drop foot following stroke. An important factor in ankle dysfunction is damage to the central nervous system (CNS). Correspondingly, the fundamental goal of rehabilitation training is to stimulate the reorganization and compensation of the CNS, and to promote the recovery of the motor system’s motor perception function. Therefore, an increasing number of ankle rehabilitation robots have been developed to provide long-term accurate and uniform rehabilitation training of the AJC, among which the parallel ankle rehabilitation robot (PARR) is the most studied. The aim of this study is to provide a systematic review of the state of the art in PARR technology, with consideration of the mechanism configurations, actuator types with different trajectory tracking control techniques, and rehabilitation training methods, thus facilitating the development of new and improved PARRs as a next step towards obtaining clinical proof of their rehabilitation benefits.

Methods

A literature search was conducted on PubMed, Scopus, IEEE Xplore, and Web of Science for articles related to the design and improvement of PARRs for ankle rehabilitation from each site’s respective inception from January 1999 to September 2020 using the keywords “ parallel”, “ ankle”, and “ robot”. Appropriate syntax using Boolean operators and wildcard symbols was utilized for each database to include a wider range of articles that may have used alternate spellings or synonyms, and the references listed in relevant publications were further screened according to the inclusion criteria and exclusion criteria.

Results and discussion

Ultimately, 65 articles representing 16 unique PARRs were selected for review, all of which have developed the prototypes with experiments designed to verify their usability and feasibility. From the comparison among these PARRs, we found that there are three main considerations for the mechanical design and mechanism optimization of PARRs, the choice of two actuator types including pneumatic and electrically driven control, the covering of the AJC’s motion space, and the optimization of the kinematic design, actuation design and structural design. The trajectory tracking accuracy and interactive control performance also need to be guaranteed to improve the effect of rehabilitation training and stimulate a patient’s active participation. In addition, the parameters of the reviewed 16 PARRs are summarized in detail with their differences compared by using figures and tables in the order they appeared, showing their differences in the two main actuator types, four exercise modes, fifteen control strategies, etc., which revealed the future research trends related to the improvement of the PARRs.

Conclusion

The selected studies showed the rapid development of PARRs in terms of their mechanical designs, control strategies, and rehabilitation training methods over the last two decades. However, the existing PARRs all have their own pros and cons, and few of the developed devices have been subjected to clinical trials. Designing a PARR with three degrees of freedom (DOFs) and whereby the mechanism’s rotation center coincides with the AJC rotation center is of vital importance in the mechanism design and optimization of PARRs. In addition, the design of actuators combining the advantages of the pneumatic-driven and electrically driven ones, as well as some new other actuators, will be a research hotspot for the development of PARRs. For the control strategy, compliance control with variable parameters should be further studied, with sEMG signal included to improve the real-time performance. Multimode rehabilitation training methods with multimodal motion intention recognition, real-time online detection and evaluation system should also be further developed to meet the needs of different ankle disability and rehabilitation stages. In addition, the clinical trials are in urgent need to help the PARRs be implementable as an intervention in clinical practice.

Toward improving functional recovery in spinal cord injury using robotics: a pilot study focusing on ankle rehabilitation

Background: Conventional physical therapy interventions are strongly recommended to improve ambulation potential and upright mobility in persons with incomplete spinal cord injury (iSCI). Ankle rehabilitation plays a significant role, as it aims to stem drop foot consequences.Research question: This pilot study aimed to assess the neurophysiological underpinnings of robot-aided ankle rehabilitation (using a platform robot) compared to conventional physiotherapy and its efficacy in improving gait performance and balance in persons with iSCI.Methods: Ten individuals with subacute/chronic iSCI (six males and four females, 39 ± 13 years, time since injury 8 ± 4 months, ASIA impairment scale grade C-D) were provided with one-month intensive training for robot-aided ankle rehabilitation (24 sessions, 1 h daily, six times a week). Clinical (10-Meter Walk Test (10MWT), 6-Minute Walk Test (6MWT), and Timed Up and Go test (TUG)), and electrophysiological aftereffects (surface-EMG from tibialis anterior and medial gastrocnemius muscles to estimate muscle activation patterns; and corticomuscular coherence-CMC-to assess functional synchronization between sensorimotor cortex and muscles, i.e. the functional integrity of corticospinal output) were assessed at baseline (PRE) and after the trial completion (POST). The experimental group (EG) data were compared with those coming from a retrospective control group (CG; n = 10) matched for clinical-demographic characteristics, who previously underwent conventional ankle rehabilitation.Results: the EG achieved a greater improvement in balance and gait as compared to the CG (TUG EG from 70 ± 18 to 45 ± 15 s, p = 0.002; CG from 68 ± 21 to 48 ± 18 s, p = 0.01; group-comparison p = 0.001; 10MWT EG from 0.43 ± 0.11 to 0.51 ± 0.09 m/s, p = 0.006; CG from 0.4 ± 0.13 to 0.45 ± 0.12, p = 0.01; group-comparison p = 0.006; 6 MWT EG from 231 ± 13 to 274 ± 15 m, p < 0.001; CG from 236 ± 13 to 262 ± 15 m, p = 0.003; group-comparison p = 0.01). Furthermore, the EG showed a retraining of muscle activation (an increase within proper movements, with a reduction of co-contractions) and CMC (beta frequency increase within proper movements, i.e. in a framework of preserved motor coordination). The improvements in CMC, gait, balance, and muscle activation were not correlated with each other.Conclusions: Robot-aided ankle rehabilitation improved gait performance by selectively ameliorating CMC, muscle activation patterns, and, lastly, gait balance and speed. Despite CMC, gait, balance, and muscle activation were not correlated, this pilot study suggests that robot-aided ankle rehabilitation may favor a better communication between above-SCI and below-SCI structures. This communication improvement may depend on a more synchronized corticospinal output (as per CMC increase) and a better responsiveness of below-SCI motorneurons to corticospinal output (as per specific and ankle movement focused muscle activation increases at the surface EMG), thus favoring greater recruitment of spinal motor units and, ultimately, improving muscle activation pattern and strength.Significance: Adopting robot-aided ankle rehabilitation protocols for persons with iSCI in the subacute/chronic phase may allow achieving a clinically significant improvement in gait performance.

Design of a 2DoF Ankle Exoskeleton with a Polycentric Structure and a Bi-Directional Tendon-Driven Actuator Controlled Using a PID Neural Network

Lower limb exoskeleton robots help with walking movements through mechanical force, by identifying the wearer’s walking intention. When the exoskeleton robot is lightweight and comfortable to wear, the stability of walking increases, and energy can be used efficiently. However, because it is difficult to implement the complex anatomical movements of the human body, most are designed simply. Due to this, misalignment between the human and robot movement causes the wearer to feel uncomfortable, and the stability of walking is reduced. In this paper, we developed a two degrees of freedom (2DoF) ankle exoskeleton robot with a subtalar joint and a talocrural joint, applying a four-bar linkage to realize the anatomical movement of a simple 1DoF structure mainly used for ankles. However, bidirectional tendon-driven actuators (BTDAs) do not consider the difference in a length change of both cables due to dorsiflexion (DF) and plantar flexion (PF) during walking, causing misalignment. To solve this problem, a BTDA was developed by considering the length change of both cables. Cable-driven actuators and exoskeleton robot systems create uncertainty. Accordingly, adaptive control was performed with a proportional-integral-differential neural network (PIDNN) controller to minimize system uncertainty.

Trends and Technologies in Rehabilitation of Foot Drop: A Systematic Review

INTRODUCTION

Foot Drop (FD) is a condition, which is very commonly found in post-stoke patients; however it can also be seen in patients with multiple sclerosis, and cerebral palsy. It is a sign of neuromuscular damage caused by the weakness of the muscles. There are various approaches of FD's rehabilitation, such as physiotherapy, surgery, and the use of technological devices. Recently, researchers have worked on developing various technologies to enhance assisting and rehabilitation of FD.

AREAS COVERED

This review analyzes different types of technologies available for FD. This include devices that are available commercially or still under research. 101 studies published between 2015 and 2020 were identified for the review, many were excluded due to various reasons, e.g., were not robot-based devices, did not include FD as one of the targeted diseases, or was insufficient information. 24 studies that met our inclusion criteria were assessed. These studies were further classified into two different categories: robot-based ankle-foot orthosis (RAFO) and Functional Electrical Stimulation (FES) devices.

EXPERT OPINION

Studies included showed that both RAFO and FES showed considerable improvement in the gait cycle of the patients. Future trends are inclining towards integrating FES with other neuro-concepts such as muscle-synergies for further developments.

Quantifying Age-Related Differences of Ankle Mechanical Properties Using a Robotic Device

A deep analysis of ankle mechanical properties is a fundamental step in the design of an exoskeleton, especially if it is to be suitable for both adults and children. This study aims at assessing age-related differences of ankle properties using pediAnklebot. To achieve this aim, we enrolled 16 young adults and 10 children in an experimental protocol that consisted of the evaluation of ankle mechanical impedance and kinematic performance. Ankle impedance was measured by imposing stochastic torque perturbations in dorsi-plantarflexion and inversion-eversion directions. Kinematic performance was assessed by asking participants to perform a goaldirected task. Magnitude and anisotropy of impedance were computed using a multipleinput multiple-output system. Kinematic performance was quantified by computing indices of accuracy, smoothness, and timing. Adults showed greater magnitude of ankle impedance in both directions and for all frequencies, while the anisotropy was higher in children. By analyzing kinematics, children performed movements with lower accuracy and higher smoothness, while no differences were found for the duration of the movement. In addition, adults showed a greater ability to stop the movement when hitting the target. These findings can be useful to a proper development of robotic devices, as well as for implementation of specific training programs.

Wearable Ankle Robots in Post-stroke Rehabilitation of Gait: A Systematic Review

Background: Stroke causes weak functional mobility in survivors and affects the ability to perform activities of daily living. Wearable ankle robots are a potential intervention for gait rehabilitation post-stroke. Objective: The aim of this study is to provide a systematic review of wearable ankle robots, focusing on the overview, classification and comparison of actuators, gait event detection, control strategies, and performance evaluation. Method: Only English-language studies published from December 1995 to July 2018 were searched in the following databases: PubMed, EMBASE, Web of Science, Scopus, IEEE Xplore, Science Direct, SAGE journals. Result: A total of 48 articles were selected and 97 stroke survivors participated in these trials. Findings showed that few comparative trials were conducted among different actuators or control strategies. Moreover, mixed sensing technology which combines kinematic with kinetic information was effective in detecting motion intention of stroke survivors. Furthermore, all the selected clinical studies showed an improvement in the peak dorsiflexion degree of the swing phase, propulsion on the paretic side during push-off, and further enhanced walking speed after a period of robot-assisted ankle rehabilitation training. Conclusions: Preliminary findings suggest that wearable ankle robots have certain clinical benefits for the treatment of hemiplegic gait post-stroke. In the near future, a multicenter randomized controlled clinical trial is extremely necessary to enhance the clinical effectiveness of wearable ankle robots.

A Review on the Control of the Mechanical Properties of Ankle Foot Orthosis for Gait Assistance

In the past decade, advanced technologies in robotics have been explored to enhance the rehabilitation of post-stroke patients. Previous works have shown that gait assistance for post-stroke patients can be provided through the use of robotics technology in ancillary equipment, such as Ankle Foot Orthosis (AFO). An AFO is usually used to assist patients with spasticity or foot drop problems. There are several types of AFOs, depending on the flexibility of the joint, such as rigid, flexible rigid, and articulated AFOs. A rigid AFO has a fixed joint, and a flexible rigid AFO has a more flexible joint, while the articulated AFO has a freely rotating ankle joint, where the mechanical properties of the AFO are more controllable compared to the other two types of AFOs. This paper reviews the control of the mechanical properties of existing AFOs for gait assistance in post-stroke patients. Several aspects that affect the control of the mechanical properties of an AFO, such as the controller input, number of gait phases, controller output reference, and controller performance evaluation are discussed and compared. Thus, this paper will be of interest to AFO researchers or developers who would like to design their own AFOs with the most suitable mechanical properties based on their application. The controller input and the number of gait phases are discussed first. Then, the discussion moves forward to the methods of estimating the controller output reference, which is the main focus of this study. Based on the estimation method, the gait control strategies can be classified into subject-oriented estimations and phase-oriented estimations. Finally, suggestions for future studies are addressed, one of which is the application of the adaptive controller output reference to maximize the benefits of the AFO to users.