Push-Out Bond Strength of Experimental Apatite Calcium Phosphate Based Coated Gutta-Percha

Comparative Analysis of Interfacial Adaptation and Depth Penetration of Recent HiFlow versus Regular Bioceramic Sealers in Conjunction with BC Gutta-Percha Points Using Two Different Obturation Techniques-A Preliminary Report of an Ex Vivo Study

This study aimed to assess the adaptability and penetration depth capacity of recent bioceramic systems, including regular EndoSequence (BC) versus HiFlow (BCH) sealers in the presence of BC points. A total of 54 single-rooted teeth were instrumented and obturated with either the cold or warm compaction technique (n = 9), using either BC, BCH, or AH Plus (AHP) combined with BC points. The adaptation, film thickness, and gaps/voids were evaluated by scanning electron microscopy. The sealer/dentin interface was evaluated by Raman spectroscopy, and depth penetration was evaluated by a confocal laser scanning microscope. According to the normality test, the data were statistically analyzed by ANOVA or Kruskal-Wallis and Mann-Whitney U tests at p < 0.05. BCH sealer showed the significantly thinnest film with the greatest flow (p > 0.001), with further improvement when subjected to the warm compaction technique. Moreover, it exhibited close adaptation with deep penetration into radicular dentin, forming a tag-like structure. The Raman spectra also indicated close contact with the dentin surface. The use of BC sealer with BC points exhibited homogenous, single-unit obturation, either with a cold or warm technique. Furthermore, the use of the warm compaction technique with BCH sealer achieved a gap-free interface associated with tag-like structures, which exhibit the monoblock phenomenon.

Impact of low-fusion gutta-percha cones used in variations of the continuous wave condensation technique with filling sealers based on bioceramic compounds on the quality of root canal filling

To evaluate the impact on the quality of filling with of low-fusion and conventional gutta-percha cones. Thirty-six maxillary canines were prepared and divided into three groups: I-conventional cone with Downpack at 200 °C at 4 mm from the WL; II-low-fusion cone with Downpack at 100 °C up to 4 mm from the WL; III-low-fusion cone with Downpack at 100 °C up to 7 mm from the WL. Temperature variations were measured in thirds on the external surface of the root. The bond strength was evaluated using the push-out test. The adhesive interface was analyzed by scanning electron microscopy. The bond strength and the temperature variation data were analyzed using analysis of variance and the failure type using the chi-square test. The low-fusion cone group with 7 mm Downpack showed higher bond strength (4.2 ± 2.7) compared with conventional cones (2.8 ± 1.6) and low-fusion cones with 4 mm Downpack (2.9 ± 1.6) (p < 0.05), with occurrence of a higher number of adhesive failures to the filling material and mixed failures. Relative to temperature variation, there was less temperature change in the apical third, in the low-fusion cone with Downpack 7 mm (1.0 ± 1.0) (p < 0.05). The use of low-fusion cones allowed the continuous wave condensation technique to be performed at a lower depth of Downpack at 100 °C at 7 mm, with less heating in the apical third, without compromising the quality of filling. Using gutta-percha cones with low fusion, which permits a lower condensation temperature and reduced Downpack depth, maintains the quality of filling, in order to minimize possible damage to the periapical tissues.

Physicochemical properties of calcium silicate cement based endodontic sealers

AIM

To mensure the physicochemical properties of three ceramic cement endodontic sealers AH Plus Bioceramic, Bio-C Sealer and Bio-C Sealer Ion+ with an epoxy resin sealer, AH Plus.

MATERIAL AND METHODS

These properties were measured: hardening time (HT), dimensional change (DC), solubility (SL), flow (FL) and radiopacity (RD). The distilled water obtained from the SL test was analyzed with atomic absorption spectrometry. A sample calculation was made considering n = 5 repetitions for each experimental sealer evaluated. Statistical analysis was performed using one-way ANOVA and post hoc Tukey tests (p < 0.05).

RESULTS

For the HT, AH Plus (484 ± 2.76 min) and AH Plus Bioceramic (424 ± 1.23 min) set more slowly than of Bio-C Sealer (370 ± 4.50 min) and Bio-C Sealer Ion+ (380 ± 1.42 min) (p < 0.05). AH Plus Bioceramic (12.56 ± 2.71 %) was more soluble than Bio-C Sealer (6.69 ± 1.67 %), Bio-C Sealer Ion+ (5.67 ± 2.16 %) and AH Plus (0.15 ± 0.01 %) (p < 0.05). AH Plus (0.03 ± 0.01 %) had slight expansion while the cement-based sealers had shrinkage: AH Plus Bioceramic (-1.60 ± 0.63 %) and Bio-C Sealer (-1.38 ± 0.69 %), Bio-C Sealer Ion+ (-5.19 ± 1.23 %) (p < 0.05). Bio-C Sealer Ion+ (59.80 ± 0.86 mm) and Bio-C Sealer (58.60 ± 0.98 mm) had the highest flow compared with AH Plus (56.90 ± 0.56 mm) and AH Plus Bioceramic (49.50 ± 0.63 mm) (p < 0.05). AH Plus (9.17 ± 0.06 mmAl) and AH Plus Bioceramic (8.27 ± 0.84 mmAl) showed radiopacity values when compared with those of Bio-C Sealer (4.90 ± 0.08 mmAl) and Bio-C Sealer Ion+ (4.14 ± 0.05 mmAl) (p > 0.05).

CONCLUSION

Ion release is inhered to these cement-based sealers and this result in calcium ion release.

Influence of bioceramic cones on the quality of root canal filling relative to bond strength and adaptation of the adhesive interface

AIM

To evaluate the bond strength (BS) and analysis of the adhesive interface in root canals filled with bioceramic gutta percha sealers and cones.

MATERIAL AND METHODS

Ninety-six maxillary canines were divided into eight groups according to the endodontic sealer (AH Plus, AH Plus Bioceramic, Bio-C Sealer or Bio-C Sealer Ion+ and gutta percha cones (conventional or bioceramic) tested. They were analyzed using the BS test, failure pattern, analysis of the adhesive interface by scanning electron microscopy and confocal laser scanning microscopy. The BS data were compared between groups using the analysis of variance test with the Turkey post-test. The chi-square test was used to assess the type of failure and the non-parametric Mann-Whitney and Kruse-Wallis tests (P < 0.05).

RESULTS

Analysis of variance showed higher BS values for the groups of bioceramic gutta percha cones in Bio-C Sealer Ion+ (8.38 ± 4.27), AH Plus Bioceramic (6.19 ± 3.28), Bio-C Sealer (5.70 ± 3.18), AH Plus (4.61 ± 2.11) and for conventional gutta percha cones in AH Plus sealers (4.26 ± 2.35), Bio-C Sealer Ion + (3.63 ± 2.29), Bio-C Sealer (2.94 ± 2.32) and AH Plus Bioceramic (1.19 ± 0.89) (P < 0.05). Relative to the type of failure and adaptation of the types of filling material, a higher percentage of mixed failures was observed (gaps between 1 µm-10 µm) for the group with bioceramic gutta percha cones (P < 0.001).

CONCLUSION

The bond between sealers and bioceramic gutta percha cones showed higher bond strength values and greater penetration into the dentin tubules.

CLINICAL RELEVANCE

The filling the root canal system with bioceramic sealers should be associated with bioceramic gutta percha cones.

Adjunctive use of Er, Cr: YSGG laser, Potassium titanyl Phosphate laser, and photosensitizer on extrusion bond strength of radicular dentin to bioceramic sealers

AIM

To assess the impact of adjunctive final root canal disinfection regime curcumin photosensitizer (CP) activated by Photodynamic therapy (PDT), Er, Cr: YSGG laser (ECL), and Potassium titanyl Phosphate (KTP) laser on the bond integrity of two endodontic Bioceramic (BC) sealers.

MATERIALS AND METHOD

Decoration of eighty human single-rooted teeth was performed up to a cementoenamel junction. After instrumentation, all samples were irrigated with 2.25% NaOCl solution followed by 17% EDTA. The specimens were divided arbitrarily into 8 groups (n = 10) based on the adjunctive final irrigation method used. Group 1 and 5 (Control): No adjunctive regime, cleaned using 2.25% NaOCl + 17% EDTA, group 2 and group 6: CP activated by PDT, Group 3 and Group 7 using ECL, Group 4 and Group 8: KTP laser. Following disinfection samples in groups 1, 2, 3, and 4 were obturated using Sankin apatite root canal sealer (SARS). Specimens in groups 5, 6, 7, and 8 were obturated using Pro-root endo sealer (PRES). Sectioning of samples was performed. The sectioned specimens were subjected to a compressive loading exerted via a steel plunger moving at a 0.5 mm/min crosshead speed till debonding. Means and standard deviations (SD) of EBS of BC sealer with the root canal dentin were assessed using one-way analysis of variance (ANOVA) and Post Hoc Tukey multiple comparison tests. The level of significance was measured at p = 0.05.

RESULTS

The coronal section of samples in group 5 (Na-E-PRES) exhibited the highest bond value. The lowest PBS was displayed by the middle third of specimens in group 6. Group 1 (Na-E-SARS), group 3 (Na-E-ECL-SARS), group 5 (Na-E-PRES), and group 7 (Na-E-ECL-PRES) exhibited comparable bond values (p>0.05). Whereas, group 2 (Na-E-PDT-SARS) and group 4 (Na-E-PTPL-SARS), group 6 (Na-E-PDT-PRES), and group 8 (Na-E-PTPL-PRES) were found to be comparable (p>0.05).

CONCLUSION

Adjunctive use of Er, Cr: YSGG laser displayed better extrusion bond strength with BC root canal sealer compared to CP activated by PDT and KTP laser. Bond strength is influenced by the type of irrigation.

Influence of Propolis, Ozone and Photodynamic therapy in root canal disinfection on resin bond strength to radicular dentin

AIM

The aim of the present study was to assess post space disinfection using different irrigants and their effect on radicular dentin bond to SERC.

MATERIALS AND METHODS

Forty single rooted mandibular 2nd premolars were collected and disinfected. All samples were decoronated maintaining root length of 12 mm and embedded vertically in acrylic resin. Shaping of the canal was performed using reciprocating system. Canals were dried using paper points and obturated with gutta percha via lateral condensation. Peso-reamers were used to create post space up to 10 mm. The post space was irrigated with 1% NaOCl before being randomly allocated into four groups (n = 10) according to different methods of canal disinfection. Samples in group 1 were subjected to photoactivated disinfection (PAD), group 2 irrigated with ethanol based propolis group 3 disinfected using ozone and group 4 irrigated with 2.25 % NaOCl with 17 % EDTA and ECL. GFP was fitted using SERC. Each sample was cut into 1 mm from coronal, middle and apical and subjected to pushout bond strength (PBS) via universal testing machine. Fracture analysis were confirmed by stereomicroscope at 40x magnification. For comparison of means, Analysis of variance (ANOVA) and Tukey multiple comparison test was used maintaining the level of significance at p <  0.05.

RESULTS

The highest PBS at all three levels were found in group 4, canal disinfected with 2.5 % NaOCl with 17 % EDTA and ECYL. Whereas, the lowest PBS was observed in group 1. Inter group comparison, prosthetic space disinfected with propolis extract showed no significant difference to group 4 canal disinfected with 2.5 % NaOCl with 17 % EDTA and ECYL at all three levels (p > 0.05). Intra group comparison in all experimental groups showed no significant difference was noted in coronal and middle thirds of group 1, group 2 and group 3 respectively (p > 0.05).

CONCLUSION

2.5 % NaOCl with EDTA and ECL treatment (group 4) remains the gold standard when used as a final canal irrigant. Propolis can be used as potential irrigant for canal disinfectant provided if the composition becomes standardized.

Photodynamic activation of irrigation (using different laser prototypes) on push out bond strength of fiber posts

BACKGROUND

To evaluate the influence of photodynamic therapy (PDT) and light activated irrigation (LAI) using different laser prototypes Er,Cr:YSGG (ECYL), Er:Yag (EYL), Nd-Yag (NYL) on pushout bond strength of Pre-fabricated fiber reinforced composite (PFRC) post to radicular dentin.

MATERIAL AND METHOD

Fifty maxillary and mandibular teeth were collected, cleaned and decoronated. Canals were instrumented using crown-down technique. Flaring of canals was performed using protaper S1, SX files. F1, F2 and F3 files were utilized for finishing of canal preparations. Prepared root canals were dried and obturated with gutta percha. Teeth were placed vertically within the section of polyvinyl pipes using acrylic resin. Post space preparation was completed using peso-reamers. Based on the PDT and laser activated irrigation (LAI) with different laser prototypes, samples were divided into five groups of 10 specimens each. Group 1- PDT, group 2-5.25 % NaOCl (sodium hypochlorite) and 17 % EDTA (ethylene diamine tetra acetic acid), group 3-5.25 % NaOCl with 17 % EDTA and NYL, group 4-5.25 % NaOCl with 17 % EDTA and EYL ; and group 5-5.25 % NaOCl +17 % EDTA and ECYL. Fiber post were luted in root canals with self-etch dual cure cement and teeth were sectioned at three levels (apical, middle and coronal). Push-out test was performed by placing the specimens in universal testing machine. Failure analysis of debonded surfaces was evaluated using stereomicroscope at 40× magnification. Means and standard deviations of push out bond strength were assessed by one-way analysis of variance (ANOVA). Comparison between means of push out bond strength was evaluated using Tukey multiple comparison tests (p = 0.05).

RESULT

The highest push out bond strength was observed in group 5 at all three levels, coronal (10.08 ± 0.74 MPa), middle (8.95 ± 0.94 MPa) and apical (6.00 ± 0.88 MPa). The lowest push out bond strength was demonstrated by group 2 at all levels, coronal (6.15 ± 1.22 MPa), middle (5.65 ± 0.95 MPa) and apical (2.25 ± 0.55 MPa). Intra-group comparison showed decrease in push out bond strength in the coronal to apical direction among all investigated groups. Inter-group comparison exhibited comparable push out bond strength at all three levels of root for group 1 and group 2 specimens (p > 0.05).

CONCLUSION

LAI with different laser prototypes improved push out bond values of PFRC post to root dentin as an adjunct to NaOCl and EDTA treatment. PDT improved push out strength compared to conventional canal cleaning regime.

Experimental Resin-Based Monoblock Endodontic Obturation System

Objective. The aim of the present study was to characterize a novel resin-based monoblock endodontic obturation system consisting of a polymeric cone and a resin-based endodontic sealer. Methods. The preliminary tests performed for the experimental cone were as follows: cohesive strength, dimensional stability, standardization of the diameter and taper, calcium ion release, and radiopacity, for the characterization of the experimental sealer, film thickness and flow tests were performed. Tests were performed according to the American National Standards Institute/American Dental Association (ANSI/ADA) Standards Nos. 57 and 78. The experimental cone was compared to gutta-percha, whereas the experimental sealer was compared to AH Plus. Data were analyzed by Student’s t-test (α = 0.05). Results. The experimental cone had superior values for cohesive strength and dimensional stability compared to gutta-percha. Regarding calcium ion release, the experimental system continued to release calcium ions after 30 days. Film thickness was similar for both endodontic sealers; conversely, the experimental resin-based sealer achieved higher values for flow compared to AH Plus. Conclusion. The experimental resin-based monoblock obturation system fully met the requirements of the ANSI/ADA Standard No. 78 and the ANSI/ADA Standard No. 57, except for radiopacity. Considering this, further studies are still needed to evaluate other radiopacifiers and the effect of their incorporation on the physicochemical properties of this novel resin-based monoblock endodontic obturation system.