3D Comparison of Mandibular Response to Functional Appliances: Balters Bionator versus Sander Bite Jumping

Influence of bone morphogenetic protein (BMP) signaling and masticatory load on morphological alterations of the mouse mandible during postnatal development

OBJECTIVE

Bone homeostasis relies on several contributing factors, encompassing growth factors and mechanical stimuli. While bone morphogenetic protein (BMP) signaling is acknowledged for its essential role in skeletal development, its specific impact on mandibular morphogenesis remains unexplored. Here, we investigated the involvement of BMP signaling and mechanical loading through mastication in postnatal mandibular morphogenesis.

DESIGN

We employed conditional deletion of Bmpr1a in osteoblasts and chondrocytes via Osterix-Cre. Cre activity was induced at birth for the 3-week group and at three weeks for the 9-week and 12-week groups, respectively. The conditional knockout (cKO) and control mice were given either a regular diet (hard diet, HD) or a powdered diet (soft diet, SD) from 3 weeks until sample collection, followed by micro-CT and histological analysis.

RESULTS

The cKO mice exhibited shorter anterior lengths and a posteriorly inclined ramus across all age groups compared to the control mice. The cKO mice displayed an enlarged hypertrophic cartilage area along with fewer osteoclast numbers in the subchondral bone of the condyle compared to the control group at three weeks, followed by a reduction in the cartilage area in the posterior region at twelve weeks. Superimposed imaging and histomorphometrical analysis of the condyle revealed that BMP signaling primarily affects the posterior part of the condyle, while mastication affects the anterior part.

CONCLUSIONS

Using 3D landmark-based geometric morphometrics and histological assessments of the mandible, we demonstrated that BMP signaling and mechanical loading reciprocally contribute to the morphological alterations of the mandible and condyle during postnatal development.

Soft Tissue Facial Morphology in Growing Patients with Different Occlusal Classes

INTRODUCTION

The study of facial profiles in the dental field is very important for the diagnosis and the dental and orthodontic treatment plan. The aim of this study is to analyze the three-dimensional morphology of the faces of 269 growing patients with Class I and II occlusions, focusing on children aged between 6 and 9 years old. The analysis was conducted using a non-invasive computerized system, which allowed for the automatic collection of facial landmarks and the subsequent reconstruction of three-dimensional coordinates.

MATERIALS AND METHODS

The sample comprised 269 children within the specified age range. Each child's facial features were captured using the non-invasive computerized system, which utilized two infrared CCD cameras, real-time hardware for label recognition, and software for three-dimensional landmark reconstruction. Sixteen cutaneous facial landmarks were automatically collected for each participant. From these landmarks, 10 angular and 15 linear measurements, as well as five direct distance rates, were derived. The mean values for each age class were calculated separately for children with bilateral Angle Class I occlusion and compared with those for children with bilateral Class II occlusion. In all children, the left and right occlusal classes were measured as suggested by Katz.

RESULTS

The analysis revealed notable differences, primarily in the three-dimensional angular measurements between children with Class I and II occlusions. Specifically, Class II children exhibited more convex faces in the sagittal plane and a less prominent lower jaw compared to Class I children. However, no significant differences were observed in linear measurements, except for the lower facial height rate, which varied inconsistently across age groups between the two occlusion types.

DISCUSSION AND CONCLUSIONS

the findings of this research highlight distinct three-dimensional facial morphological differences between children with Class I and II occlusions. While Class II children tended to have more convex facial profiles and less prominent lower jaws, linear measurements showed minimal variation between the two occlusion types. These results underscore the importance of three-dimensional analysis in understanding facial morphology in growing patients with different occlusal patterns.

Predictability of expansion movements performed by clear aligners in mixed dentition in both arches: a retrospective study on digital casts

BACKGROUND

to evaluate the predictability of expansion achieved in patients in early mixed dentition treated with Clear Aligners (CA), analyzing the efficiency of the expansion at the end of the first set of aligners and at the end of the therapy in the upper and lower arch.

METHODS

36 patients (20 F, 16 M; mean age 8.3 ± 1.5 years) were selected retrospectively from the Department of Orthodontics of the Hospital of Rome "Tor Vergata". All subjects were treated with CA with no other auxiliaries than attachments. For each patient a standardized sequential expansion protocol was planned for both arches. Digital dental casts were created at three observation periods from an intraoral scanner: prior to treatment (T0), at the end of the first set of aligners (T1), at the end of treatment (T2). The 3D models in planned position determined by the first Clincheck (CC) were obtained for comparison with T1 and T2. Six linear transversal measurements were used to evaluate the dimensional changes and the predictability of expansion movements, comparing T1-CC and T2-CC.

RESULTS

a statistically significant increase within the pre-treatment and the final outcomes for all the variables examined was found. In the upper arch, the greatest level of predictability was detected at the level of the first (46.44%) and second deciduous molar width (44.95%) at T1. The analysis of T2-CC changes showed a significant increase in the percentage of predictability of expansion at the level of the first permanent molars, at mesial (54.86%) and distal (58.92%) width. In the lower arch, a higher percentage of predictability than the upper arch was reported at T1-CC and T2-CC, with the greatest values at the level of second (T1-CC: 48.70%; T2-CC: 75.32%) and first deciduous molar width (T1-CC: 45.71%; T2-CC: 72.75%).

CONCLUSIONS

CA can induce significant transversal increments. The predictability of expansion is variable, but it did not exceed the 50% during the first set of aligners. It was necessary to apply refinement set to achieve a good predictability for expansion of about 70%. The expansion in the lower arch was observed to be more predictable than in the upper arch.

Experimental validation of mechanical oscillating IPR system

BACKGROUND

Interproximal enamel reduction (IPR) is a clinical procedure which involves reduction and anatomic recontouring of interproximal surfaces of enamel as a method of gaining space. The biological effects related to this clinical procedure have long been discussed. Thus, the aim of this study was to evaluate the enamel reduction efficiency and the effects on enamel surfaces of the oscillating mechanical system for interproximal enamel reduction (IPR).

METHODS

Fifteen complete oscillating IPR sequences included one opener (0.1 mm), two metallic strips for active IPR phase (0.2 and 0.3 mm), three resin strips for active and initial polishing phases (0.4 and 0.5 mm), and one resin strip for polishing phase (0.15 mm). Sequences were selected and tested on fifteen freshly extracted teeth by means of tribological tests with alternative dry-sliding motion (Linear Reciprocating Tribometer; C.S.M. Instruments, Peseaux, Switzerland). A 3D analysis of treated surfaces was performed by using a TayMap software. Then, enamel surfaces were qualitatively evaluated before and after the tribological analysis, with a FEI Quanta 200 (FEI, Hillsboro, OR, USA) in high vacuum at 30.00 kV. Images were acquired at a 30×, 100× and 300× magnification.

RESULTS

Minimum surface irregularities were observed on all treated enamel surfaces when compared with untreated ones. The 3D analysis showed a uniform wear pattern after tribological tests. Meanwhile, the SEM analysis revealed smooth and regular wear lines on treated surfaces after the entire mechanical IPR sequence. The macroscopic irregularities illustrated can be considered similar to those of untreated surfaces.

CONCLUSIONS

The adoption of a standardized oscillating IPR sequence allows an efficient reduction of the interproximal enamel, leaving regular and harmonious surfaces. Adequate polishing procedures should always be performed at the end of active IPR phases in order to guarantee a good long-term prognosis and proper respect of biological structures.

Impact of initial lip competence on the outcome of class II functional appliances therapy

OBJECTIVES

The aim of this prospective clinical study was to evaluate the impact of initial lip position on class II functional appliance therapy.

MATERIALS AND METHODS

In total, 34 class II division 1 patients (23 females, 19 males; mean age 12.4 ± 0.9 years) that met the inclusion criteria (> ½ class II molar relationship, overjet > 6 mm, ANB > 4°, neutral or horizontal growth pattern, cervical vertebral maturation stage (CVMS) II - III, mean wear-time > 10 h/day) were consecutively divided into two groups (lip incompetence (LI); lip competence (LC)). All patients were treated with the Sander bite jumping appliance (BJA). Wear time was microelectronically measured. Lateral cephalograms were taken at the beginning (T0) and after 1 year of treatment (T1). An untreated class II group served as a control (CG). Inter-group comparisons were determined with Mann-Whitney U tests for independent samples.

RESULTS

Significant skeletal treatment effects were found in both treated groups when compared to the CG with significantly more pronounced mandibular skeletal effects in the LI than in the LC group (mandibular base length p < 0.001, composite mandibular base length p < 0.001, condylar head growth p = 0.002, co-pg p < 0.00, go-pg p = 0.003, reduction of the ANB angle p = 0.009, and Wits appraisal p < 0.001).

CONCLUSION

The more pronounced mandibular effects in the LI group were composed of the functional orthopedic effect plus harmonization of the lip competence.

CLINICAL RELEVANCE

Functional harmonization of lip incompetence with BJA enhances mandibular growth stimulation. Lip incompetence seems to impede mandibular growth and its harmonization seems to be a preventive approach.

Clear aligner mandibular advancement in growing patients with Class II malocclusion

Treatment effects occurring during Class II malocclusion treatment with the clear aligner mandibular advancement protocol were evaluated in two growing patients: one male (12 years, 3 months) and one female (11 years, 9 months). Both patients presented with full cusp Class II molar and canine relationships. Intraoral scans and cone-beam computed tomography were acquired before treatment and after mandibular advancement. Three-dimensional skeletal and dental long-axis changes were quantified, in which the dental long axis was determined by registering the dental crowns obtained from intraoral scans to the root canals in cone-beam computed tomography scans obtained at the same time points. Class II correction was achieved by a combination of mandibular skeletal and dental changes. A similar direction of skeletal and dental changes was observed in both patients, with downward and forward displacement of the mandible resulting from the growth of the mandibular condyle and ramus. Dental changes in both patients included mesialization of the mandibular posterior teeth with flaring of mandibular anterior teeth. In these two patients, clear aligner mandibular advancement was an effective treatment modality for Class II malocclusion correction with skeletal and dental effects and facial profile improvement.

Effectiveness of functional orthodontic appliances in obstructive sleep apnea treatment in children: literature review

INTRODUCTION

Obstructive sleep apnea syndrome is a common condition in childhood and if left untreated can result in many health problems. An accurate diagnosis of the etiology is crucial for obstructive sleep apnea treatment success. Functional orthodontic appliances that stimulate mandibular growth by forward mandibular positioning are an alternative therapeutic option in growing patients.

OBJECTIVE

To perform a literature review about the effects of functional orthodontic appliances used to correct the mandibular deficiency in obstructive sleep apnea treatment.

METHODS

The literature search was conducted in June 2020 using Cochrane Library; PubMed, EBSCO (Dentistry & Oral Sciences Source), LILACS Ovid; SciELO Web of Science; EMBASE Bireme and BBO Bireme electronic databases. The search included papers published in English, until June 2020, whose methodology referred to the types and effects of functional orthopedic appliances on obstructive sleep apnea treatment in children.

RESULTS

The search strategy identified thirteen articles; only four articles were randomized clinical studies. All studies using the oral appliances or functional orthopedic appliances for obstructive sleep apnea in children resulted in improvements in the apnea-hypopnea index score. The cephalometric (2D) and tomographic (3D) evaluations revealed enlargement of the upper airway and increase in the upper airspace, improving the respiratory function in the short term.

CONCLUSION

Functional appliances may be an alternative treatment for obstructive sleep apnea, but it cannot be concluded that they are effective in treating pediatric obstructive sleep apnea. There are significant deficiencies in the existing evidence, mainly due to absence of control groups, small sample sizes, lack of randomization and no long-term results.

Effects of fixed functional appliances with temporary anchorage devices on Class II malocclusion: A systematic review and meta‑analysis

BACKGROUND

The use of fixed functional appliances (FFAs) in conjunction with temporary anchorage devices (TADs) has been proposed to enhance skeletal changes and reduce proclination of the lower incisors.

OBJECTIVES

To systematically investigate the skeletal and dentoalveolar effects of FFAs with TADs on Class II malocclusion in adolescents.

METHODS

Electronic searches of databases and manual searches of references were performed up to August 30, 2020. Randomized controlled trials (RCTs) and clinical controlled trials (CCTs) focusing on adolescent patients treated with FFAs combining TADs were included. The modified Cochrane risk-of-bias tool (R.O.B 2.0) and ROBINS-I (Risk of Bias in Non-randomized Studies-of Interventions) Tool were used to assess the risk of bias in RCTs and CCTs, respectively. Meta-analyses of SNA, SNB, ANB, Co-Gn, SN-MP, the lower and upper incisor inclination changes were performed. Subgroup analyses and sensitivity analyses were conducted based on TAD types, FFA types, record types and types of study designs.

RESULTS

Ten studies were included with a sample size of 281. Meta-analyses revealed significant differences in the changes in SNB (mean difference [MD] 0.67; 95% confidence interval [CI] 0.04-1.29), ANB (MD -1.22, 95% CI -2.04 to -0.39), Co-Gn (MD 1.57; 95% CI 0.22-2.92), inclination of the lower incisors (MD -5.64, 95% CI -7.78 to -3.50)] and inclination of the upper incisors (MD -1.91; 95% CI -3.69 to -0.13). TAD types and FFA types seem to affect the treatment outcome.

CONCLUSIONS

Compared with FFAs alone, FFAs with TADs exhibit superior skeletal effects and reduce the inclination of the lower incisors in the short term; however, the evidence showed moderate to high risk of bias. Registration number CRD42020177611.

Soft tissue evaluation of functional therapy in growing patients with Class II malocclusion: a long-term study

OBJECTIVE

The objective of this study was to analyse the soft tissue changes produced by the functional treatment of mandibular advancement in growing Class II patients.

MATERIALS

The treated group consisted of 25 Caucasian patients (12 females and 13 males) with dento-skeletal Class II malocclusion treated with functional therapy (Activator). All patients were evaluated before treatment (T1; mean age, 9.9 years), at the end of functional treatment phase (T2; mean age, 11.9 years), and at a post-pubertal follow-up observation (T3; mean age, 18.5 years). The treated group was compared with a matched control group of 25 untreated subjects (13 females, 12 males) with untreated Class II division 1 malocclusion. Statistical comparisons between the two groups were performed with independent samples t-tests (P < 0.05).

RESULTS

Significant improvements were found during the long-term interval for mandibular sulcus (9.9°) and the profile facial angle (9.8°) in the treated group. No significant effects were found in terms of lower face percentage between the two groups.

CONCLUSION

Removable functional appliances induced positive effects on the soft tissue profile in Class II growing subjects with good stability in the long-term.

Three-dimensional cone beam computed tomography analysis of temporomandibular joint response to the Twin-block functional appliance

Objective

To propose a three-dimensional (3D) method for evaluating temporomandibular joint (TMJ) changes during Twin-block treatment.

Methods

Seventeen patients with Class II division 1 malocclusion treated using Twin-block and nine untreated patients with a similar malocclusion were included in this research. We collected their cone beam computed tomography (CBCT) data from before and 8 months after treatment. Segmentations were constructed using ITK-SNAP. Condylar volume and superficial area were measured using 3D Slicer. The 3D landmarks were identified on CBCT images by using Dolphin software to assess the condylar positional relationship. 3D models of the mandible and glenoid fossa of the patients were constructed and registered via voxel-based superimposition using 3D Slicer. Thereafter, skeletal changes could be visualized using 3DMeshMetric in any direction of the superimposition on a color-coded map. All the superimpositions were measured using the same scale on the distance color-coded map, in which red color represents overgrowth and blue color represents resorption.

Results

Significant differences were observed in condylar volume, superficial area, and condylar position in both groups after 8 months. Compared with the control group (CG), the Twin-block group exhibited more obvious condyle-fossa modifications and joint positional changes. Moreover, on the color-coded map, more obvious condyle-fossa modifications could be observed in the posterior and superior directions in the Twin-block group than in the CG.

Conclusions

We successfully established a 3D method for measuring and evaluating TMJ changes caused by Twin-block treatment. The treatment produced a larger condylar size and caused condylar positional changes.

Different approaches to the treatment of skeletal Class II malocclusion during growth: Bionator versus extraoral appliance

INTRODUCTION

Class II malocclusion, which has a significant incidence in the population, may compromise facial esthetics and the smile, as well as the masticatory and respiratory functions. Often associated with skeletal abnormalities, it severely affects and compromises quality of life. An accurate diagnosis is fundamental to prepare a treatment plan to correct dental and skeletal anomalies.

OBJECTIVES

This study discusses treatment alternatives to the correction of Class II division 1 and 2 malocclusion in growing patients, using a Bionator and an extraoral appliance.