Differences of the Morphology of Subaxial Cervical Spine Endplates between Chinese and White Men and Women

Clinicosocial determinants of hospital stay following cervical decompression: A public healthcare perspective and machine learning model

OBJECTIVE

Post-operative length of hospital stay (LOS) is a valuable measure for monitoring quality of care provision, patient recovery, and guiding hospital resource management. But the impact of patient ethnicity, socio-economic deprivation as measured by the indices of multiple deprivation (IMD), and pre-existing health conditions on LOS post-anterior cervical decompression and fusion (ACDF) is under-researched in public healthcare settings.

METHODS

From 2013 to 2023, a retrospective study at a single center reviewed all ACDF procedures. We analyzed 14 non-clinical predictors-including demographics, comorbidities, and socio-economic status-to forecast a categorized LOS: short (≤2 days), medium (2-3 days), or long (>3 days). Three machine learning (ML) models were developed and assessed for their prediction reliability.

RESULTS

2033 ACDF patients were analyzed; 79.44 % had a LOS ≤ 2 days. Significant predictors of LOS included patient sex (HR:0.81[0.74-0.88], p < 0.005), IMD decile (HR:1.38[1.24-1.53], p < 0.005), smoking (HR:1.24[1.12-1.38], p < 0.005), DM (HR:0.70[0.59-0.84], p < 0.005), and COPD (HR:0.66, p = 0.01). Asian patients had the highest mean LOS (p = 0.003). Testing on 407 patients, the XGBoost model achieved 80.95 % accuracy, 71.52 % sensitivity, 85.76 % specificity, 71.52 % positive predictive value, and a micro F1 score of 0.715. This model is available at: https://acdflos.streamlit.app.

CONCLUSIONS

Utilizing non-clinical pre-operative parameters such as patient ethnicity, socio-economic deprivation index, and baseline comorbidities, our ML model effectively predicts postoperative LOS for patient undergoing ACDF surgeries. Yet, as the healthcare landscape evolves, such tools will require further refinement to integrate peri and post-operative variables, ensuring a holistic decision support tool.

Does the sizing of current cervical disc arthroplasty systems match Chinese cervical anatomic dimensions?

Objective: The objectives of this study were to analyze the computed tomography (CT) scan imaging data of the cervical spine from healthy volunteers and to correlate the measurements to the dimensions of current cervical disc arthroplasty systems. Methods: A total of 130 participants (78 males and 52 females) with a mean age of 41.0 years (range 18.0-66.0 years) who had undergone computed tomography scans of the cervical spine were included. The linear parameters of the C3 to C7 levels, including anterior-posterior diameter (AP), middle disc height (DH), anterior disc height (ADH), posterior disc height (PDH) and center mediolateral diameter (ML), were measured. The analysis was conducted comparing different cervical levels, sexes, and age groups. Known dimensions from eight cervical disc arthroplasty systems were compared with the morphologic data. Results: A total of 520 vertebral segments were measured. The mean values for the measured parameters were as follows: anterior-posterior diameter 16.08 ± 1.84 mm, mediolateral diameter 16.13 ± 1.99 mm, anterior disc height 3.88 ± 1.11 mm, disc height 5.73 ± 1.00 mm, posterior disc height 2.83 ± 0.94 mm, and mediolateral diameter/anterior-posterior diameter 1.01 ± 0.13. All parameters except for posterior disc height were significantly different across the different cervical levels (p < 0.05). There were also significant sex differences in terms of the linear parameters. No differences were found in the majority of parameters among the different age groups (p > 0.05), except for anterior-posterior diameter at the C6/7 level. A comparison of the bone dimensions from the study data and the dimensions of the implants indicated the presence of a size mismatch in the currently available cervical disc prostheses. Conclusion: There is a large discrepancy between the cervical anatomical data of Chinese patients and the sizes of currently available prostheses. The dimensions collected in this study could be used to design and develop appropriate disc prostheses for Chinese patients.

Parathyroid hormone enhances gap healing and osseointegration in orthopedic porous coated titanium implants: a correlative micro-computed tomographic, histomorphometric and biomechanical analysis

Background

Parathyroid hormone, with its anabolic effect on bone formation, has shown excellent outcomes of curing postmenopausal osteoporosis as well as enhancing osseointegration around orthopaedic and stomatologic implants.The purpose of the present study is to test if low-dose intermittent PTH (1–34) treatment could achieve a satisfactory osseointegration in 2-mm peri-implant gaps, as to provide a new idea for improving the stability of such prosthesis, which will be of great clinical value.

Methods

A custom-made titanium implant was implanted on the calvarium of New Zealand White rabbits. 48 male rabbits were randomly divided into control and PTH group. PTH group received subcutaneous injection of PTH (20 μg/day, 5 days/week). Animals were sacrificed at 4 and 8 weeks after surgery. Quantitative micro-computed tomography, histology and biomechanical pull-out testing were performed to evaluate the gap healing at implantation site.

Results

Analysis of micro-computed tomography demonstrated that PTH group achieved more new bone formation in 2-mm gaps and on bone-implant interface. Quantitatively, significant differences were observed between two groups in regard to BIC and BV/TV at each time-point. Histological staining revealed that PTH group had a superiority in trabecular number, thickness, separation and better osseointegration compared to control group. As for biomechanical pull-out testing, PTH group also showed significant improvement of ultimate force than control group.

Conclusions

Low-dose intermittent administration of PTH for 4 and 8 weeks enhances early osseointegration and fixation of orthopedic implants surrounded by a 2-mm gap in terms of increased bone regeneration and mechanical stability. These findings suggest PTH a potential for reducing the postoperative complications of implants by improving bone healing at peri-implant gaps.

Effects of endplate coverage and intervertebral height change on heterotopic ossification following cervical disc replacement

Background

Heterotopic ossification (HO) is a common complication after cervical disc replacement (CDR). Biomechanical factors including endplate coverage and intervertebral disc height change may be related to HO formation. However, there is a dearth of quantitative analysis for endplate coverage, intervertebral height change and their combined effects on HO.

Methods

Patients who underwent single-level or two-level CDR with Prestige-LP were retrospectively reviewed. Clinical outcomes were evaluated through Japanese Orthopaedic Association (JOA) score, Neck Disability Index (NDI) score, and visual analogue scale (VAS) score. Radiological data, including the prosthesis-endplate depth ratio, intervertebral height change, posterior heterotopic ossification (PHO) and angular parameters, were collected. Logistic regression analysis was used to identify the potential risk factors. Receiver operating characteristic curves were plotted and the cut-off values of each potential factors were calculated.

Results

A total of 138 patients with 174 surgical segments were evaluated. Both the prosthesis-endplate depth ratio (P < 0.001) and post-operative disc height change (P < 0.001) were predictive factors for PHO formation. The area under the curve (AUC) of the prosthesis-endplate depth ratio, disc height change and their combined effects represented by the combined parameter (CP) were 0.728, 0.712 and 0.793, respectively. The risk of PHO significantly increased when the prosthesis-endplate depth ratio < 93.77% (P < 0.001, OR = 6.909, 95% CI 3.521–13.557), the intervertebral height change ≥ 1.8 mm (P < 0.001, OR = 5.303, 95% CI 2.592–10.849), or the CP representing the combined effect < 84.88 (P < 0.001, OR = 10.879, 95% CI 5.142–23.019).

Conclusions

Inadequate endplate coverage and excessive change of intervertebral height are both potential risk factors for the PHO after CDR. Endplate coverage less than 93.8% or intervertebral height change more than 1.8 mm would increase the risk of PHO. The combination of these two factors may exacerbate the non-uniform distribution of stress in the bone-implant interface and promote HO development.

Differences in the Prevalence of Clinical Adjacent Segment Pathology among Continents after Anterior Cervical Fusion: Meta-Analysis of Randomized Controlled Trials

Development of adjacent segment pathology leading to secondary operation is a matter of concern after anterior cervical discectomy and fusion (ACDF). Some studies have reported anatomic difference between races, but no epidemiological data on prevalence of clinical adjacent segment pathology (cASP) among races or continents has been published. The purpose of this study was to compare the prevalence of cASP that underwent surgery after monosegmental ACDF among continents by meta-analysis. MEDLINE, EMBASE, and Cochrane Library with manual searching in key journals, reference lists, and the National Technical Information Service were searched from inception to December 2018. Twenty studies with a total of 2009 patients were included in the meta-analysis. We extracted the publication details, sample size, and prevalence of cASP that underwent surgery. A total of 15 papers from North America, three from Europe, and two from Asia met the inclusion criteria. A total number of 2009 patients underwent monosegmental ACDF, and 113 patients (5.62%) among them had cASP that underwent surgery. The rate of cASP that underwent surgery was 4.99% in the North America, 3.65% in the Europe, 6.34% in the Asia, and there were no statistically significant differences (p = 0.63). The current study using the method of meta-analysis revealed that there were no significant differences in the rate of cASP that underwent surgery after ACDF among the continents.

Reliability and reproducibility of measurements in para-sagittal planes on sub-axial cervical vertebral bodies: a morphometric study of endplates in three-dimensional models

Background

Dimensional measurements have been implemented on a variety of entities in morphological studies of the sub-axial cervical vertebral endplate. Despite great progress, little information between the mid-sagittal plane and bilateral uncinate processes has been acquired due to the lack of a reliable method to determine the para-sagittal planes. Also, few studies of this region are available. We proposed a new approach to defining the para-sagittal planes on a 3D cervical vertebral body model; in this approach, dimensions can be measured in a specific plane. The aim of this study was to assess the inter-observer and intra-observer reliability of the measurements in different sagittal planes on sub-axial cervical vertebral endplates of 3D models.

Methods

We established mid-sagittal and bilateral quarter para-sagittal planes on the 3D model of a sub-axial cervical vertebral body based on landmarks labeled on the surface. By intersecting the vertebral body with the planes, three curves located at the three para-sagittal planes were generated. Linear dimensions were measured on every curve by two observers separately, and in total, 24 sub-axial cervical spines were included in the study. The first observer (O1) performed the procedure twice with an interval of 2 weeks. The paired t test, Wilcoxon matched-pairs signed-rank test and the interclass correlation coefficient (ICC) were employed to evaluate the inter- and intra-observer reliability of the proposed method.

Results

There were no significant differences in most intra- and inter-observer comparisons, and higher non-significant proportions were found in the intra-observer comparisons than in comparisons between different observers. The interclass correlation coefficients (ICCs) in the measurements were excellent (> 0.75) in most circumstances, and the values in intra-observer comparisons were higher than those in inter-observer comparisons.

Conclusions

In this study, we proposed an approach to determine the bilateral quarter para-sagittal planes in a 3D cervical vertebral body model; the results demonstrated that the method is reproducible with high intra- and inter-observer agreement.

The aiming device for cervical distractor pin insertion: a proof-of-concept, feasibility study

Background

Restoration of cervical lordosis after anterior discectomy and fusion is a desirable goal. Proper insertion of the vertebral distraction or Caspar pin can assist lordotic restoration by either putting the tips divergently or parallel to the index vertebral endplates. With inexperienced surgeons, the traditional free-hand technique for Caspar pin insertion may require multiple insertion attempts that may compromise the vertebral body and increase radiation exposure during pin localization. Our purpose is to perform a proof-of-concept, feasibility study to evaluate the effectiveness of a pin insertion aiming device for vertebral distraction pin insertion.

Methods

A Smith-Robinson approach and anterior cervical discectomy were performed from C3 to C7 in 10 human cadaveric specimens. Caspar pins were inserted using a novel pin insertion aiming device at C3-4, C4-5, C5-6, and C6-7. The angles between the cervical endplate slope and Caspar pin alignment were measured with lateral cervical imaging.

Results

The average Superior Endplate-to-Caspar Pin angle (SE-CP) and the average Inferior Endplate-to-Caspar Pin angle (IE-CP) were 6.2 ± 2.0° and 6.3 ± 2.2° respectively. For the proximal pins, the SE-CP and the IE-CP were 4.0 ± 1.1°and 5.2 ± 2.4° respectively. For the distal pins, the SE-CP and the IE-CP were 7.7 ± 1.4° and 6.2 ± 2.0° respectively. No cervical endplate violations occurred.

Conclusion

The novel Caspar pin insertion aiming device can control the pin entry points and pin direction with the average SE-CP and average IE-CP of 6.2 ± 2.0° and 6.3 ± 2.2°, respectively. The study shows that the average different angles between the Caspar pin and cervical endplate are less than 7°.

Morphologic analysis of Chinese lumbar endplate by three-dimensional computed tomography reconstructions for helping design lumbar disc prosthesis

Lumbar disc prostheses have been used increasingly in recent years. The successful design of lumbar disc prostheses depends on accurate morphometric parameters. However, the morphologic dimensions of lumbar endplate area have not been investigated in Chinese population.A total of 1800 lumbar endplates were retrospectively accessed in 150 Chinese adults. Eighteen parameters of each lumbar segment were measured by three-dimensional computed tomography reconstructions from T12/L1 to L5/S1. These obtained parameters were compared between genders, bilateral sides, vertebral segments, and different populations.Endplate length and width increased in general, and there was a significant decrease for length/width ratio from T12 to S1 (P = .03). The average concavity depth of the lower lumbar endplate (2.09 ± 0.93 mm) was usually larger than that of the upper lumbar endplate (1.61 ± 0.74 mm) (P = .02). The percentage of the most concave point of the upper and lower lumbar endplate was 50.01 ± 10.76% and 56.41 ± 9.93%, respectively. Anterior, medium, or posterior intervertebral endplate height was severally 10.01 ± 1.98 mm, 10.46 ± 2.03 mm, and 6.41 ± 1.74 mm, and increased among vertebral segments (P = .01).The intervertebral endplate angle significantly increased from T12-L1 to L5-S1 (P = .01). Parameters displayed significant difference between genders. The morphometric parameters of different populations also showed differences.In conclusion, there is a morphologic discrepancy in dimensions of lumbar endplate regarding genders, vertebral segments, and different populations. It is essential to design the lumbar disc prosthesis suited for Chinese patients specially, for which the morphometric parameters in our study can be utilized.

Prevalence of high-riding vertebral arteries and narrow C2 pedicles among Central-European population: a computed tomography-based study

High-riding vertebral artery (HRVA) and narrow C2 pedicles (C2P) pose a great risk of injuring the vessel during C2 pedicle or transarticular screw placement. Recent meta-analysis revealed a paucity of European studies regarding measurements and prevalence of these anatomical variants. Three hundred eighty-three consecutive cervical spine CT scans with 766 potential screw insertion sites were analyzed independently by two trained observers. C2 internal height (C2InH), C2 isthmus height (C2IsH), and C2P width were measured. Kappa statistics for inter- and intraobserver reliability as well as for inter-software agreement were calculated. HRVA was defined as C2IsH of ≤ 5 mm and/or C2InH of ≤ 2 mm. Narrow C2P was defined as C2P width ≤ 4 mm. STROBE checklist was followed. At least 1 HRVA was found in 25,3% (95% CI 21,1–29,8) of patients (16,7% of potential sites). At least 1 narrow C2P was seen in 36,8% (95% CI 32,1–41,7) of patients (23,8% of potential sites). Among those with HRVA, unilateral HRVA was present in 68,0% (95% CI 58,4–77,0), whereas bilateral HRVA in 32,0% (95% CI 23,0–41,6). No difference in terms of laterality (right or left) was seen neither for HRVA nor narrow C2P. Significant differences were found between females and males for all measurements. Each parameter showed either good or excellent inter- or intraobserver, and inter-software agreement coefficients. HRVA and narrow C2P are common findings in Central-European population and should be appreciated at the planning stage before craniocervical instrumentation. Measurements can be consistently reproduced by various observers at varying intervals using different software.

Comparative analysis of three types of titanium mesh cages for anterior cervical single-level corpectomy and fusion in term of postoperative subsidence

A titanium mesh cage (TMC) is a common device used for interbody fusion in anterior cervical corpectomy and fusion (ACCF) surgery, with postoperative subsidence being a common complication. Among the many influencing factors, there is a paucity of research on the end-covers of the TMC. A total of 62 patients with cervical spondylotic myelopathy were treated with single-level ACCF. TMC without end-covers (group A), traditional TMC with end-covers (group B) and new TMC with end-covers (group C) were used as the fusion device. We evaluated the surgery time, intraoperative blood loss, postoperative drainage volume, postoperative fusion, falling height of the fused segment, cervical curvature and severe subsidence rate (the number of falling height of the fused segment > 3 mm/total surgical cases in the group). In addition, the Japanese Orthopaedic Association score was used for neurological status assessment and a 10-point Visual Analog Scale for postoperative neck pain. The results showed that the falling height of the fused segment in group A (1.9 ± 0.6 mm) was significantly greater than in group B (0.9 ± 0.2 mm) and group C (0.8 ± 0.3 mm). The area of the end-covers increased gradually in group A, group B and group C, while the severe subsidence rate of group A (8/20, 40%), group B (5/22, 23%) and group C (2/20, 10%) gradually decreased. The surgery time and blood loss in group B (116.4 ± 12.2 min, 183.5 ± 36.4 mL) were higher than those in group A (90.22 ± 5.60 min, 110.4 ± 20.8 mL) and group C (92.8 ± 8.47 min, 114 ± 24.0 mL). These results showed that there was a correlation between the postoperative subsidence and the end-covers of TMC. The larger the end-cover area was, the lower the severe postoperative subsidence rate was. In addition, the design of the end-covers extending inward was more conducive to the operation.

Biomechanical Analysis of Allograft Spacer Failure as a Function of Cortical-Cancellous Ratio in Anterior Cervical Discectomy/Fusion: Allograft Spacer Alone Model

The design and ratio of the cortico-cancellous composition of allograft spacers are associated with graft-related problems, including subsidence and allograft spacer failure. Methods: The study analyzed stress distribution and risk of subsidence according to three types (cortical only, cortical cancellous, cortical lateral walls with a cancellous center bone) and three lengths (11, 12, 14 mm) of allograft spacers under the condition of hybrid motion control, including flexion, extension, axial rotation, and lateral bending,. A detailed finite element model of a previously validated, three-dimensional, intact C3–7 segment, with C5–6 segmental fusion using allograft spacers without fixation, was used in the present study. Findings: Among the three types of cervical allograft spacers evaluated, cortical lateral walls with a cancellous center bone exhibited the highest stress on the cortical bone of spacers, as well as the endplate around the posterior margin of the spacers. The likelihood of allograft spacer failure was highest for 14 mm spacers composed of cortical lateral walls with a cancellous center bone upon flexion (PVMS, 270.0 MPa; 250.2%) and extension (PVMS: 371.40 MPa, 344.2%). The likelihood of allograft spacer subsidence was also highest for the same spacers upon flexion (PVMS, 4.58 MPa; 28.1%) and extension (PVMS: 12.71 MPa, 78.0%). Conclusion: Cervical spacers with a smaller cortical component and of longer length can be risk factors for allograft spacer failure and subsidence, especially in flexion and extension. However, further study of additional fixation methods, such as anterior plates/screws and posterior screws, in an actual clinical setting is necessary.