A mechanistic approach to arsenic adsorption and immobilization in aqueous solution, groundwater, and contaminated paddy soil using pine-cone magnetic biochar

Arsenic (As) poisoning in groundwater and rice paddy soil has increased globally, impacting human health and food security. There is an urgent need to deal with As-contaminated groundwater and soil. Biochar can be a useful remedy for toxic contaminants. This study explains the synthesis of pinecone-magnetic biochar (PC-MBC) by engineering the pinecone-pristine biochar with iron salts (FeCl3.6H2O and FeSO4.7H2O) to investigate its effects on As(V) adsorption and immobilization in water and soil, respectively. The results indicated that PC-MBC can remediate As(V)-contaminated water, with an adsorption capacity of 12.14 mg g-1 in water. Isotherm and kinetic modeling showed that the adsorption mechanism involved multilayer, monolayer, and diffusional processes, with chemisorption operating as the primary interface between As(V) and biochar. Post-adsorption analysis of PC-MBC, using FTIR and XRD, further revealed chemical fixing and outer-sphere complexation between As(V) and Fe, O, NH, and OH as the main reasons for As(V) adsorption onto PC-MBC. Recycling of PC-MBC also had excellent adsorption even after several regeneration cycles. Similarly, PC-MBC successfully immobilized As in paddy soil. Single and sequential extraction results showed the transformation of mobile forms of As to a more stable form, confirmed by non-destructive analysis using SEM, EDX, and elemental dot mapping. Thus, Fe-modified pine-cone biochar could be a suitable and cheap adsorbent for As-contaminated water and soil.

Competitive adsorption of sulfamethoxazole and bisphenol A on magnetic biochar: Mechanism and site energy distribution

Competitive adsorption and complementary adsorption between emerging pollutants has been observed in multiple studies. Investigation of the preference of pollutants for different types of adsorption sites can provide a supplementary perspective for understanding complementary adsorption. In this study, the simultaneous adsorption of two typical emerging pollutants, sulfamethoxazole (SMX) and bisphenol A (BPA), on magnetic biochar (MBC-1) was investigated. The results showed that the modification with ferric chloride optimized the surface properties of biochar (aromaticity, hydrophobicity, and oxygen-containing functional groups, etc.), and helped to remove SMX and BPA through various interactions. The equilibrium adsorption capacity of the two adsorbents was inhibited by competitive adsorption in the mixed solute systems, which was due to the same adsorption mechanism. When pH = 7, the SMX and BPA adsorption mainly involved pore filling, hydrophobic effect, π-π EDA, and hydrogen bonding. In addition, electrostatic force, surface coordination, and ion exchange have also been proven to be related to the adsorption of SMX and BPA. In the co-adsorption system, BPA's competitive advantage might be due to its superior hydrophobicity, charge property, and molecular diameter. In the competitive adsorption experiment, the total adsorption capacity (Q_i) of the competitive solute exceeded the adsorption inhibition (△Q_i) of the main solute, indicating that the two solutes occupied their preferred adsorption sites, which confirmed the complementary adsorption phenomenon. Complementary adsorption can be explained by the preference of SMX and BPA for different types of adsorption sites. BPA preferentially occupied high-energy sites in the co-adsorption system, such as π-π EDA interaction, ion exchange, and surface coordination. At the same time, SMX tended to be removed by hydrophobic interaction and hydrogen bonding.

Arsenic removal from aqueous solution: A comprehensive synthesis with meta-data

Removal of arsenic from drinking water is one of the most important global concerns. Among the various techniques, adsorptive removal of arsenic is considered as a viable most effective method. However, limited attention is given to understand the overall relative sorption capacity of different sorbents (e.g., biocomposite, biochar and nano-composite etc.) since various factors influence the sorption capacity. The aim of this study is to assess the effectiveness of various adsorbents with quantitative estimation (Langmuir adsorption maxima, Qmax) as well as to evaluate the influence of experimental conditions on the achievement of maximum adsorption. A number of analyses including meta-analysis, analysis of variance (ANOVA), scientometric and regression were performed. The results revealed that among the sorbents, nanoparticles show the greatest sorption capacity while pre-doped biochar performed the best among different biochars. Average across all sorbents, As (V) removal efficacy was higher than As (III). As expected, a high point of zero charge (PZC) and higher positive surface charge favored adsorption. The relative contribution of different mechanisms was also discussed. Our scientometric analyses revealed that, research should focus on the development of low-cost adsorbents and increase their reusability, safe disposal of adsorbed arsenic. Altogether, our findings provide a molecular understanding of arsenic sorption to different sorbents with implications for tailoring a good sorbent for arsenic removal from drinking water.

Arsenic adsorption by different Fe-enriched biochars conditioned with sulfuric acid

In this study, ferric chloride and sulfuric acid were used to increase the Fe-containing minerals on the biochar surface before a pyrolysis at 600 °C. The pristine and Fe-modified biochars prepared at different concentrations of sulfuric acid (50FBC and 72FBC) were characterized and analyzed, and their capacity of As(V) adsorption under various pH and ionic strength were evaluated. The results showed that the maximum adsorption capacities of As(V) calculated by the Langmuir model for 50FBC and 72FBC are 10.33 and 15.61 mg g-1, respectively, which are enhanced by 5.0 and 7.8 times compared with the pristine biochar. The higher dosage of H2SO4 (72%) used in the modification leads to a better adsorption capacity of As, especially under neutral to alkaline conditions (7.0 < pH < 10.0). It might result from the increased amounts of Fe-containing minerals formed on the biochar surface, and the enriched functional groups such as phenolic hydroxyl and carboxyl, resulting in the resistance to alkaline conditions. Overall, the Fe-modified biochar, especially 72FBC, had good potential as an environmentally friendly adsorbent for removing As from contaminated water under a wider pH range.

Adsorption and immobilization performance of pine-cone pristine and engineered biochars for antimony in aqueous solution and military shooting range soil: An integrated novel approach

Antimony (Sb-V), a carcinogenic metalloid, is becoming prevalent in water and soil due to anthropogenic activities. Biochar could be an effective remedy for Sb(V)-contaminated water and soil. In this study, we used pristine and engineered pinecone-derived biochar as an innovative approach for treating Sb(V)-contaminated water and shooting range soil. Biochar was produced from pine-cone waste (pristine biochar) and enriched with Fe and Al salts via saturation (engineered biochar). Adsorption tests in water revealed that iron-modified biochar showed higher adsorption capacity (8.68 mg g^-1) than that of the pristine biochar (2.49 mg g^-1) and aluminum-modified biochar (3.40 mg g^-1). Isotherm and kinetic modeling of the adsorption data suggested that the adsorption process varied from monolayer to multilayer, with chemisorption as the dominant interaction mechanism between Sb(V) and the biochars. The post-adsorption study of iron-modified biochar by Fourier Transform Infrared (FTIR) and X-ray diffraction (XRD) further supported the chemical bonding and outer-sphere complexation of Sb(V) with Fe, N-H, O-H, C-O and CC components. The pristine and iron-modified biochars also successfully immobilized Sb(V) in a shooting range soil, more so in the latter. Subsequent sequential extractions and post-analysis by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), and elemental dot mapping revealed that Sb in the treated soil transformed to a more stable form. It was concluded that iron-modified biochar could act as an efficient material for the adsorption and immobilization of Sb(V) in water and soil, respectively.

Phosphate Removal Mechanisms in Aqueous Solutions by Three Different Fe-Modified Biochars

Iron-modified biochar can be used as an environmentally friendly adsorbent to remove the phosphate in wastewater because of its low cost. In this study, Fe-containing materials, such as zero-valent iron (ZVI), goethite, and magnetite, were successfully loaded on biochar. The phosphate adsorption mechanisms of the three Fe-modified biochars were studied and compared. Different characterization methods, including scanning electron microscopy/energy-dispersive spectrometry (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), were used to study the physicochemical properties of the biochars. The dosage, adsorption time, pH, ionic strength, solution concentration of phosphate, and regeneration evaluations were carried out. Among the three Fe-modified biochars, biochar modified by goethite (GBC) is more suitable for phosphate removal in acidic conditions, especially when the pH = 2, while biochar modified by ZVI (ZBC) exhibits the fastest adsorption rate. The maximum phosphate adsorption capacities, calculated by the Langmuir-Freundlich isothermal model, are 19.66 mg g^-1, 12.33 mg g^-1, and 2.88 mg g^-1 for ZBC, GBC, and CSBC (biochar modified by magnetite), respectively. However, ZBC has a poor capacity for reuse. The dominant mechanism for ZBC is surface precipitation, while for GBC and CSBC, the major mechanisms are ligand exchange and electrostatic attraction. The results of our study can enhance the understanding of phosphate removal mechanisms by Fe-modified biochar and can contribute to the application of Fe-modified biochar for phosphate removal in water.

Adsorption Characteristics of Dimethylated Arsenicals on Iron Oxide-Modified Rice Husk Biochar

In this study, the adsorption characteristics of dimethylated arsenicals to rice husk biochar (BC) and Fe/biochar composite (FeBC) were assessed through isothermal adsorption experiments and X-ray absorption spectroscopy analysis. The maximal adsorption capacities (q_m) of inorganic arsenate, calculated using the Langmuir isotherm equation, were 1.28 and 6.32 mg/g for BC and FeBC, respectively. Moreover, dimethylated arsenicals did not adsorb to BC at all, and in the case of FeBC, q_m values of dimethylarsinic acid (DMA(V)), dimethylmonothioarsinic acid (DMMTA(V)), and dimethyldithioarsinic acid (DMDTA(V)) were calculated to be 7.08, 0.43, and 0.28 mg/g, respectively. This was due to the formation of iron oxide (i.e., two-line ferrihydrite) on the surface of BC. Linear combination fitting using As K-edge X-ray absorption near edge structure spectra confirmed that all chemical forms of dimethylated arsenicals adsorbed on the two-line ferrihydrite were DMA(V). Thus, FeBC could retain highly mobile and toxic arsenicals such as DMMTA(V) and DMDTA(V)) in the environment, and transform them into DMA(V) with relatively low toxicity.

Degradation of 4-nonylphenol in marine sediments using calcium peroxide activated by water hyacinth (Eichhornia crassipes)-derived biochar

The contamination of marine sediments by 4-nonylphenol (4-NP) has become a global environmental problem, therefore there are necessaries searching appropriate and sustainable remediation methods for in-situ applications. Herein, water hyacinth [(WH) (Eichhornia crassipes)]-derived metal-free biochar (WHBC) prepared at 300-900 °C was used to promote the calcium peroxide (CP)-mediated remediation of 4-NP-contaminaed sediments. At [CP] = 4.37 × 10^-4 M, [WHBC] = 1.5 g L^-1, and pH = 6.0, the degradation of 4-NP was 77% in 12 h following the pseudo-first order rate law with rate constant (k_obs) of 4.2 × 10^-2 h^-1. The efficient 4-NP degradation performance and reaction mechanisms of the WHBC/CP system was ascribed to the synergy between the reactive species (HO• and ¹O₂) at the WHBC surface on which there were abundant electron-rich carbonyl groups and defects/vacancies in the catalyst structure provides active sites, and the ability of the graphitized carbon framework to act as a medium for electron shuttling. According to microbial community analysis based on amplicon sequence variants, bacteria of the genus Solirubrobacter (Actinobacteria phylum) were dominant in WHBC/CP-treated sediments and were responsible for the biodegradation of 4-NP. The results showed great promise and novelty of the hydroxyl radical-driven carbon advanced oxidation processes (HR-CAOPs) that relies on the value-added utilization of water hyacinth for contaminated sediment remediation in achieving circular bioeconomy.

Adsorption of Arsenic on Fe-Modified Biochar and Monitoring Using Spectral Induced Polarization

This work demonstrates the potential of Fe-modified biochar for the treatment of arsenic (As) simulated wastewater and the monitoring of adsorption in real-time. Specifically, we propose the utilization of date-palm leaves for the production of biochar, further modified with Fe in order to improve its adsorption function against inorganic pollutants, such as As. Both the original biochar and the Fe-modified biochar were used for adsorption of As in laboratory batch and column experiments. The monitoring of the biochar(s) performance and As treatment was also enhanced by using the spectral induced polarization (SIP) method, offering real-time monitoring, in addition to standard chemical monitoring. Both the original and the Fe-modified biochar achieved high removal rates with Fe-modified biochar achieving up to 98% removal of As compared to the 17% by sand only (control). In addition, a correlation was found between post-adsorption measurements and SIP measurements.

Assessing the arsenic-saturated biochar recycling potential of vermitechnology: Insights on nutrient recovery, metal benignity, and microbial activity

Biochar mediated pollutant removal is gaining attention because of high efficiency of the process. However, effective recycling avenues of the pollutant-saturated biochars are scarce in the knowledge base; while such materials can be a new source of long-range contamination. Therefore, potential of vermitechnology for eco-friendly recycling of pollutant-loaded biochar was assessed by using arsenic-saturated native (NBC) and exfoliated (EBC) biochars as feedstocks for the first time. Interestingly, the bioavailable arsenic fractions (water soluble and exchangeable) considerably reduced by 22-44 % with concurrent increment (~8-15 %) of the recalcitrant (residual and organic bound) fractions in the biochar-based feedstocks. Consequently, ~2-3 folds removal of the total arsenic was achieved through vermicomposting. The earthworm population growth (2.5-3 folds) was also highly satisfactory in the biochar-based feedstocks. The results clearly imply that Eisenia fetida could compensate the arsenic-induced stress to microbial population and greatly augmented microbial biomass, respiration and enzyme activity by 3-12 folds. Moreover, biochar-induced alkalinity was significantly neutralized in the vermibeds, which remarkably balanced the TOC level and nutrient (N, P, and K) availability particularly in EBC + CD vermibeds. Overall, the nutrient recovery potential and arsenic removal efficiency of vermitechnology was clearly exhibited in NBC/EBC + CD (12.5:87.5) feedstocks. Hence, it is abundantly clear that vermitechnology can be a suitable option for eco-friendly recycling of pollutant-saturated sorbing agents, like biochars.