Association between the Anatomy of the Mandibular Canal and Facial Types: A Cone-Beam Computed Tomography Analysis

Midpalatal Suture Maturation in Relation to Age, Sex, and Facial Skeletal Growth Patterns: A CBCT Study

BACKGROUND

The evaluation of midpalatal suture maturation is essential to undertake the most predictable maxillary expansion approach. Several factors, such as age, gender, and facial growth patterns, seem to be involved in midpalatal suture staging and, consequently, in its opening; however, the link between these variables and the stages of midpalatal suture development remains poorly understood. Our study aimed to analyse the midpalatal suture maturation in relation to age, sex, and skeletal growth patterns by CBCT.

METHODS

We enrolled 263 patients (119 males and 144 females) aged from 8 to 20 years. The midpalatal suture maturation was defined according to Angelieri et al.'s classification using a low-dose CBCT. The chi-square test and linear regression were applied to investigate the suture stages by age, sex, and vertical and sagittal growth patterns.

RESULTS

Stage A was present in 8- and 9-year-olds with a larger prevalence in boys, while the prevalence of stage E increased progressively with age. Stage D was the most prevalent in our sample. The statistical analysis described that stage A was more likely in the youngest subjects, and stage E in the oldest participants. The males tended to have lower maturation stages. Moreover, the hypodivergent and normodivergent subjects tended to have higher maturation stages, while Class III was more likely in subjects in stages D or E.

CONCLUSIONS

A total of 127 patients were in stages A, B, and C, showing an unfused suture. In young individuals, the opening of the midpalatal suture leads to a proper facial growth development by correcting the transverse superior hypoplasia. The midpalatal sutural maturation classification was related to age, sex, and divergence.

Evaluating the influence of the mandibular canal trajectory on the duration of postoperative paraesthesia in patients undergoing inferior alveolar nerve lateralisation: a prospective cohort study

This prospective cohort study aims to evaluate the influence of the mandibular canal trajectory on the duration of postoperative paraesthesia in patients undergoing inferior alveolar nerve lateralisation (IANL). Twenty patients received a total of 50 dental implants, and their postoperative paraesthesia duration, implant success rate, and anatomical variables were assessed. All patients experienced temporary neurosensory disturbances postoperatively during the first week, but none reported permanent issues at the 12-month follow up. The median paraesthesia duration was 120 days, and no significant differences were detected between genders, anaesthesia types, or patient satisfaction. No significant association was found between the mandibular canal trajectory and postoperative paraesthesia duration. The implant success rate was 100%, with all implants integrating successfully. Our findings suggest that IANL is a safe and effective method for dental implant placement in atrophic mandibles.

Bone thickness and height of the buccal shelf area and the mandibular canal position for miniscrew insertion in patients with different vertical facial patterns, age, and sex

OBJECTIVES

The objectives of this article were the following: (1) to analyze bone thickness and height (BTH) of the buccal shelf area (BS) quantitatively in four different potentially eligible sites for miniscrew insertion; (2) to compare and contrast BTH and the changes in spatial position of the inferior alveolar nerve canal (IANC); and (3) to assess differences with age among vertical facial patterns (hypodivergent, normodivergent, and hyperdivergent) and well as by sex.

MATERIALS AND METHODS

Cone-beam computed tomography scans of 205 individuals (110 women and 95 men) were divided into groups according to age, vertical facial pattern, and sex. The BTH of the BS and the BTH to the IANC were measured in the mesial and distal roots of the first and second molars.

RESULTS

BTH progressively increased in a posterior direction (P < .001), while BTH to the IANC increased and decreased (P < .001) for thickness and height, respectively, in the same direction in all age groups, for the three different vertical facial patterns, and in both sexes. Women showed significantly less BTH to the IANC (P < .002). Hypodivergent patients had greater BTH (P < .024) and a smaller bone height to the IANC (P < .018) only in the first molar region. Patients over 40 years of age had lower bone height in the second molar area (P < .003).

CONCLUSIONS

The ideal place for BS miniscrew insertion is the region of the distal root of the second molars, regardless of facial pattern, sex, and age. The BS in women has less BTH and less BTH to the IANC.

Comparison of deep learning segmentation and multigrader-annotated mandibular canals of multicenter CBCT scans

Deep learning approach has been demonstrated to automatically segment the bilateral mandibular canals from CBCT scans, yet systematic studies of its clinical and technical validation are scarce. To validate the mandibular canal localization accuracy of a deep learning system (DLS) we trained it with 982 CBCT scans and evaluated using 150 scans of five scanners from clinical workflow patients of European and Southeast Asian Institutes, annotated by four radiologists. The interobserver variability was compared to the variability between the DLS and the radiologists. In addition, the generalisation of DLS to CBCT scans from scanners not used in the training data was examined to evaluate its out-of-distribution performance. The DLS had a statistically significant difference (p < 0.001) with lower variability to the radiologists with 0.74 mm than the interobserver variability of 0.77 mm and generalised to new devices with 0.63 mm, 0.67 mm and 0.87 mm (p < 0.001). For the radiologists' consensus segmentation, used as a gold standard, the DLS showed a symmetric mean curve distance of 0.39 mm, which was statistically significantly different (p < 0.001) compared to those of the individual radiologists with values of 0.62 mm, 0.55 mm, 0.47 mm, and 0.42 mm. These results show promise towards integration of DLS into clinical workflow to reduce time-consuming and labour-intensive manual tasks in implantology.

Maturation stages of the sutures in the median palatine evaluated with cone-beam computed tomography

INTRODUCTION

This study aimed to evaluate the influence of age, sex, and facial growth patterns on the maturation stage of midpalatal sutures.

METHODS

We selected 90 total skull cone-beam computed tomography scans and divided them into the following 3 groups: brachyfacial (n = 30), mesofacial (n = 30), and dolichofacial (n = 30). These groups were determined using Ricketts VERT 3-dimensional cephalometric analysis. All patients were aged ≥18 years and were divided into those aged ≥30 years and >30 years. The maturational stage of the median palatine sutures was determined by evaluating the central transverse axial dimension in the maxillary-mandibular palate. Maturational stages were classified as A, B, C, D, and E.

RESULTS

Of the 90 images reviewed, 55 (61.1%) were female patients, and 35 were male patients (38.9%). The age of patients ranged from 18 to 59 years, with 55 patients aged <30 years (61.1%) and 35 aged ≥30 years (38.9%). Regarding the maturational stages, 3.3% of brachyfacial, 6.7% of mesiofacial, and 16.7% of dolichofacial subjects (P = 0.032) were classified as stages B and C.

CONCLUSIONS

The patients' facial patterns were found to be a significant signal for the maturation stage of midpalatal sutures. Adult dolichofacial patients are the most likely to have stage B and C.

Variability associated with mandibular buccal shelf area width and height in subjects with different growth pattern, sex, and growth status

INTRODUCTION

The primary objective of the study was to quantitatively analyze the width and height of the mandibular buccal shelf area (MBS) at 3 different potential locations for mini-implant placement. In addition, we aimed to compare and contrast the bone parameters of the MBS to study the correlation between different growth status (growing or nongrowing), facial types (hypodivergent, normodivergent, and hyperdivergent), and sex differences (male or female).

METHODS

In this retrospective cone-beam computed tomography study, 678 subjects were included. They were divided into groups according to growth status, facial type, and sex. Scans were imported into the reconstruction program and were aligned in 3 different steps. Measurements were made at 6 different coronal sections: mandibular first molar distal root, second molar mesial root, and second molar distal root (bilaterally). The roots of mandibular molars were used as a reference to measure the width and the roof of the inferior alveolar canal to measure the height of the buccal shelf area. Intraobserver reliability was assessed by measuring the width and height of MBS in 20 randomly selected subjects.

RESULTS

No significant difference (P > 0.05) was found in the width of MBS between males and females. MBS width increased, and height decreased (P < 0.0001) as moved distally from the first molar distal root to the second molar distal root in all 3 facial types irrespective of age or sex. The hypodivergent facial type had significantly greater bone width than the hyperdivergent facial type at all the 3 locations in both males and females. The hypodivergent facial type had significantly less (P < 0.0001) bone height than the hyperdivergent group at all the 3 locations irrespective of age or sex.

CONCLUSIONS

The optimal site for MBS mini-implant is the buccal region of the distal root of mandibular second molars. Hypodivergent patients have more width and less height of MBS compared with hyperdivergent patients. MBS mini-implants are not advised for growing patients because of proximity to developing roots.

Position of the Mandibular Foramen in Different Facial Shapes Assessed by Cone-Beam Computed Tomography - A Cross-Sectional Retrospective Study

Purpose:

The mandibular foramen, located on the internal surface of the mandibular ramus, is an important anatomical landmark for the success during the inferior alveolar nerve block. This cross-sectional retrospective study aimed to evaluate the location of the mandibular foramen through Cone-Beam Computed Tomography (CBCT) in different facial shapes.

Materials and Methods:

The determination of the location of the mandibular foramen was performed using CBCT of mesocephalic, dolichocephalic and brachycephalic patients (n=40 each). The ramus width (W), the distance from the mandibular foramen to the deepest point of the anterior border of the mandibular ramus (D), the distance from the mandibular foramen to the lowest point of the mandibular notch (V) and the distance from the inferior border of the mandible to the lowest point in of the mandibular border (R), as well as the ratios W/D and V/R, were measured. ANCOVA, two-way ANOVA and Chi-square tests were used to analyze the variation among the facial shapes.

Results:

The ramus width (W) was greater (p<0.0001) in the brachycephalic (28.4±0.5 mm) than in both mesocephalic (26.8±0.36 mm) and dolichocephalic (25.5±0.39 mm) patients. D (p=0.0433) and R (p=0.0072) were also greater in the brachycephalic (17.7±0.36 mm; 43.4±0.75 mm, respectively) than dolichocephalic (16.5±0.3 mm; 40.3±0.63 mm, respectively), but both did not differ from mesocephalic (17.3±0.36 mm; 41.8±0.66 mm, respectively) patients. The other measurements (V, W/D and R/V) did not significantly differ among facial shapes.

Conclusion:

The localization of the mandibular foramen was, in the horizontal direction, more posterior in the brachycephalic patients and, in the vertical direction, higher in the dolichocephalic patients, when compared to the other groups analyzed. Thus, the anatomic data found in this study may help dentists to increase the success of the inferior alveolar nerve block and prevent surgical complications.