Possible Error in Reflection Pulse Oximeter Readings as a Result of Applied Pressure

Non-invasive method for assessment of inflammation

This article explores the potential of non-invasive measurement for elevated levels of erythrocyte aggregation in vivo, which have been correlated with a higher risk of inflammatory processes. The study proposes utilizing a dynamic light scattering approach to measure aggregability. The sensor modules, referred to as "mDLS," comprise VCSEL and two photodiodes. Two of these modules are placed on an inflatable transparent cuff, which is then fitted to the subject's finger root, with one sensor module positioned on each side. By temporarily halting blood flow for one minute using over-systolic inflation of the cuff, signals from both sensors are recorded. The study involved three distinct groups of subjects: a control group consisting of 65 individuals, a group of 29 hospitalized COVID-19 patients, and a group of 34 hospitalized patients with inflammatory diseases. Through experimental results, significant differences in signal kinetic behavior were observed between the control group and the two other groups. These differences were attributed to the rate of red blood cell (RBC) aggregation, which is closely associated with inflammation. Overall, the study emphasizes the potential of non-invasive diagnostic tools in evaluating inflammatory processes by analyzing RBC aggregation.

Performance evaluation of a wrist-worn reflectance pulse oximeter during sleep

OBJECTIVES

To characterize and evaluate the estimation of oxygen saturation measured by a wrist-worn reflectance pulse oximeter during sleep.

METHODS

Ninety-seven adults with sleep disturbances were enrolled. Oxygen saturation was simultaneously measured using a reflectance pulse oximeter (Galaxy Watch 4 [GW4], Samsung, South Korea) and a transmittance pulse oximeter (polysomnography) as a reference. The performance of the device was evaluated using the root mean squared error (RMSE) and coverage rate. Additionally, GW4-derived oxygen desaturation index (ODI) was compared with the apnea-hypopnea index (AHI) derived from polysomnography.

RESULTS

The GW4 had an overall RMSE of 2.3% and negligible bias of -0.2%. A Bland-Altman density plot showed good agreement between the GW4 and the reference pulse oximeter. RMSEs were 1.65 ± 0.57%, 1.76 ± 0.65%, 1.93 ± 0.54%, and 2.93 ± 1.71% for normal (n = 18), mild (n = 21), moderate (n = 23), and severe obstructive sleep apnea (n = 35), respectively. The data rejection rate was 26.5%, which was caused by fluctuations in contact pressure and the discarding of data less than 70% of saturation. A GW4-ODI ≥5/h had the highest ability to predict AHI ≥15/h with sensitivity, specificity, accuracy, and area under the curve of 89.7%, 64.1%, 79.4%, and 0.908, respectively.

CONCLUSIONS

This study evaluated the estimation of oxygen saturation by the GW4 during sleep. This device complies with both Food and Drug Administration and International Organization for Standardization standards. Further improvements in the algorithms of wearable devices are required to obtain more accurate and reliable information about oxygen saturation measurements.

Scattering-driven PPG signal model

This article discusses the origin of PPG signals. Two plausible hypotheses are analyzed: the volumetric hypothesis and a model wherein the PPG is driven by the RBC aggregation process. To verify the model predictions, the PPG signals at the fingertip were measured. External pressure was applied to the fingertip, presumably reducing the blood flow. The results expressed in terms of gamma, used in pulse-oximetry, agree with the aggregation model. In addition, the oscillometric signal and the PPG signal amplitude were simultaneously measured in the fingertip. All of the experimental results favor the proposed aggregation mechanism as responsible the PPG signal.

Blood pressure assessment with in-ear photoplethysmography

Objective. In this study, we aimed to estimate blood pressure (BP) from in-ear photoplethysmography (PPG). This novel implementation provided an unobtrusive and steady way of recording PPG, whereas previous PPG measurements were mostly performed at the wrist, finger, or earlobe.Methods. The time between forward and reflected PPG waves was very short at the ear site. To minimize errors introduced by feature extraction, a multi-Gaussian decomposition of in-ear PPG was performed. Both hand-crafted and whole-based features were extracted and the best combination of features was selected using a backward-search wrapper method and evaluated by the Akaike information criteria. Hemodynamic parameters such as compliance and inertance were estimated from a four-element Windkessel (WK4) model, which was used to pre-classify PPG signals and generate different BP estimation algorithms. Calibration was done by using previous measurements from the same class. To validate this novel approach, 53 subjects were recruited for a one-month follow-up study, and 17 subjects were recruited for a two-month follow-up study. Calibrated systolic BP estimation accuracy was significantly improved with inertance-based pre-classification, while diastolic BP showed less improvement.Results. With proper feature selection, pre-classification and calibration, we have achieved a mean absolute error of 5.35 mmHg for SBP estimation, compared to 6.16 mmHg if no pre-classification was carried out. The performance did not deteriorate in two months, showing a decent BP trend-tracking ability.Conclusion. The study demonstrated the feasibility of in-ear PPG to reliably measure BP, which represents an important technological advancement in terms of unobtrusiveness and steadiness.

Photoplethysmography behind the Ear Outperforms Electrocardiogram for Cardiovascular Monitoring in Dynamic Environments

An increasing proportion of occupational mishaps in dynamic, high-risk operational environments have been attributed to human error, yet there are currently no devices to routinely provide accurate physiological data for insights into underlying contributing factors. This is most commonly due to limitations of commercial and clinical devices for collecting physiological data in environments of high motion. Herein, a novel Photoplethysmography (PPG) sensor device was tested, called SPYDR (Standalone Performance Yielding Deliberate Risk), reading from a behind-the-ear location, specifically designed for high-fidelity data collection in highly dynamic high-motion, high-pressure, low-oxygen, and high-G-force environments. For this study, SPYDR was installed as a functional ear-cup replacement in flight helmets worn by rated US Navy aircrew. Subjects were exposed to reduced atmospheric pressure using a hypobaric chamber to simulated altitudes of 25,000 feet and high G-forces in a human-rated centrifuge up to 9 G acceleration. Data were compared to control devices, finger and forehead PPG sensors, and a chest-mounted 12-lead ECG. SPYDR produced high-fidelity data compared to controls with little motion-artifact controls in the no-motion environment of the hypobaric chamber. However, in the high-motion, high-force environment of the centrifuge, SPYDR recorded consistent, accurate data, whereas PPG controls and ECG data were unusable due to a high-degree-motion artifacts. The data demonstrate that SPYDR provides an accurate and reliable system for continuous physiological monitoring in high-motion, high-risk environments, yielding a novel method for collecting low-artifact cardiovascular assessment data important for investigating currently inaccessible parameters of human physiology.