Modern Trends in Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) is a powerful and versatile technique for producing colloidal dispersions of block copolymer particles with desired morphologies. Currently, PISA can be carried out in various media, over a wide range of temperatures, and using different mechanisms. This method enables the production of biodegradable objects and particles with various functionalities and stimuli sensitivity. Consequently, PISA offers a broad spectrum of potential commercial applications. The aim of this review is to provide an overview of the current state of rational synthesis of block copolymer particles with diverse morphologies using various PISA techniques and mechanisms. The discussion begins with an examination of the main thermodynamic, kinetic, and structural aspects of block copolymer micellization, followed by an exploration of the key principles of PISA in the formation of gradient and block copolymers. The review also delves into the main mechanisms of PISA implementation and the principles governing particle morphology. Finally, the potential future developments in PISA are considered.

Surface Functionalization with Polymer Brushes via Surface-Initiated Atom Transfer Radical Polymerization: Synthesis, Applications, and Current Challenges

Polymer brushes have received great attention in recent years due to their distinctive properties and wide range of applications. The synthesis of polymer brushes typically employs surface-initiated atom transfer radical polymerization (SI-ATRP) techniques. To realize the control of the polymerization process in different environments, various SI-ATRP techniques triggered by different stimuli have been developed. This review focuses on the latest developments in different stimuli-triggered SI-ATRP methods, such as electrochemically mediated, photoinduced, enzyme-assisted, mechanically controlled, and organocatalyzed ATRP. Additionally, SI-ATRP technology triggered by a combination of multiple stimuli sources is also discussed. Furthermore, the applications of polymer brushes in lubrication, biological applications, antifouling, and catalysis are also systematically summarized and discussed. Despite the advancements in the synthesis of various types of 1D, 2D, and 3D polymer brushes via controlled radical polymerization, contemporary challenges remain in the quest for more efficient and straightforward synthetic protocols that allow for precise control over the composition, structure, and functionality of polymer brushes. We anticipate the readers could promote the understanding of surface functionalization based on ATRP-mediated polymer brushes and envision future directions for their application in surface coating technologies.

Latest Advances in Highly Efficient Dye-Based Photoinitiating Systems for Radical Polymerization

Light-activated polymerization is one of the most important and powerful strategies for fabrication of various types of advanced polymer materials. Because of many advantages, such as economy, efficiency, energy saving and being environmentally friendly, etc., photopolymerization is commonly used in different fields of science and technology. Generally, the initiation of polymerization reactions requires not only light energy but also the presence of a suitable photoinitiator (PI) in the photocurable composition. In recent years, dye-based photoinitiating systems have revolutionized and conquered the global market of innovative PIs. Since then, numerous photoinitiators for radical polymerization containing different organic dyes as light absorbers have been proposed. However, despite the large number of initiators designed, this topic is still relevant today. The interest towards dye-based photoinitiating systems continues to gain in importance, which is related to the need for new initiators capable of effectively initiating chain reactions under mild conditions. In this paper we present the most important information about photoinitiated radical polymerization. We describe the main directions for the application of this technique in various areas. Attention is mainly focused on the review of high-performance radical photoinitiators containing different sensitizers. Moreover, we present our latest achievements in the field of modern dye-based photoinitiating systems for the radical polymerization of acrylates.

PVDF-Based Fluoropolymer Modifications via Photoinduced Atom Transfer Radical Polymerizations

Graft modifications of PVDF fluoropolymers have been identified as the efficient route to improve the properties and expand the applications. Taking advantage of C-F and C-Cl bonds in the repeat units, atom transfer radical polymerizations (ATRP) were widely used for graft modification. Recently, photoinduced ATRP has shown good spatial and temporal control over the polymerization process in contrast to thermal activation mode. This minireview highlights the progress in PVDF-based fluoropolymer modifications by using photoinduced Cu(II)-mediated ATRP and organocatalyzed ATRP. The challenges and opportunities are proposed with the aim at advancing the development of synthesis and applications of fluoropolymer.

Photoinduced Organocatalyzed Atom Transfer Radical Polymerization (O-ATRP): Precision Polymer Synthesis Using Organic Photoredox Catalysis

The development of photoinduced organocatalyzed atom transfer radical polymerization (O-ATRP) has received considerable attention since its introduction in 2014. Expanding on many of the advantages of traditional ATRP, O-ATRP allows well-defined polymers to be produced under mild reaction conditions using organic photoredox catalysts. As a result, O-ATRP has opened access to a range of sensitive applications where the use of a metal catalyst could be of concern, such as electronics, certain biological applications, and the polymerization of coordinating monomers. However, key limitations of this method remain and necessitate further investigation to continue the development of this field. As such, this review details the achievements made to-date as well as future research directions that will continue to expand the capabilities and application landscape of O-ATRP.

Intrinsically Elastic Organic Semiconductors (IEOSs)

Elastic semiconductors are becoming more and more important to the development of flexible wearable electronic devices, which can be prepared by structural engineering design, blending, and the intrinsic elastification of organic semiconductors (intrinsically elastic organic semiconductor, IEOS). Compared with the elastic semiconductors prepared by structural engineering and blending, the IEOS prepared by organic synthesis has attracted numerous attentions for its solution processability and highly tunable chemical structures. For IEOSs, reasonable designs of synthetic routes and methods are the basis for realizing good mechanical and electrical properties. This brief review begins with a concise introduction of elastic semiconductors, then follows with several synthetic methods of IEOSs, and concludes the characteristics of each method, which provides guidance for the synthesis of IEOSs in the future. Furthermore, the properties of IEOSs are involved from the aspects of electrical, mechanical properties, and the applications of the IEOSs in elastic electronic devices. Finally, the challenge and an outlook which IEOSs are facing are presented in conclusion.

RAFT Copolymerization of Styrene and Maleic Anhydride with Addition of Ascorbic Acid at Ambient Temperature

A novel method for RAFT copolymerization of styrene (St) and maleic anhydride (MAh) at ambient temperature using ascorbic acid (Asc) as an initiator is reported. Various experimental conditions including reaction component, monomer composition, the amount of Asc, and temperature were investigated in terms of monomer conversion, molecular weight, and molecular weight distribution. In this system, the copolymer of styrene/maleic anhydride (SMA) with well-regulated molecular weight and low molecular weight distribution (Mw/Mn=1.30) was obtained, and the conversion of monomer was 70.4% after 12 hours at 25°C. The NMR spectra demonstrated that the copolymer synthesized possesses a strictly alternating structure. Furthermore, the proposed mechanism adapted to the RAFT copolymerization of St and MAh initiated by Asc at ambient temperature is presented. Using this new methodology, it is possible to achieve well-defined SMA under mild conditions by RAFT copolymerization.