Preparation of flexible poly(l-lactide)-b-poly(ethylene glycol)-b-poly(l-lactide)/talcum/thermoplastic starch ternary composites for use as heat-resistant and single-use bioplastics

Poly(l-lactide)-b-poly(ethylene glycol)-b-poly(l-lactide) block copolymer (PLLA-PEG-PLLA) is a highly flexible bioplastic, yet its use in practical applications is limited due to its poor heat resistance and high production cost. In this study, talcum was used as a nucleating agent to improve the heat resistance, and thermoplastic starch (TPS) was used as a low-cost filler to reduce the cost of production. PLLA-PEG-PLLA/talcum/TPS and PLLA/talcum/TPS ternary composites with 4 wt% talcum and various TPS contents were prepared by melt blending before injection molding and were then evaluated. When PEG middle-blocks were present, the PLLA-PEG-PLLA-based composites showed a higher crystallinity, more flexibility, and a higher heat resistance than the PLLA-based composites. Although the addition of TPS decreased the heat resistance of all the composites, the PLLA-PEG-PLLA/talcum/TPS composites still had high Vicat softening temperatures (VST, 113-131 °C) and demonstrated a good dimensional stability to heat by maintaining their original shapes upon heat exposure. The biodegradation test in soil suggested that the synergistic effect of the PEG middle-blocks and TPS significantly increased the biodegradability of the PLLA-PEG-PLLA/talcum/TPS composites. This improved heat resistance, lower cost, and accelerated biodegradation make PLLA-PEG-PLLA/talcum/TPS composites a promising material to be used as heat-resistant and single-use bioplastic products.

Synergistic effects of PEG middle-blocks and talcum on crystallizability and thermomechanical properties of flexible PLLA-b-PEG-b-PLLA bioplastic

In this study, talcum was melt-blended with a flexible poly(l-lactide)-b-polyethylene glycol-b-poly(l-lactide) triblock copolymer (PLLA-PEG-PLLA) with 1, 2, 4, and 8 wt% talcum, for improvement of the crystallization and thermomechanical properties of PLLA-PEG-PLLA compared with PLLA. The crystallizability of PLLA-PEG-PLLA/talcum composites was better than that of PLLA/talcum composites as determined from differential scanning calorimetry. X-ray diffractometry showed that the PLLA-PEG-PLLA/talcum films had a higher degree of crystallinity than the PLLA/talcum films. PEG middle-blocks and talcum showed a synergistic effect for crystallization of PLLA end-blocks. The PLLA-PEG-PLLA/talcum films showed better thermomechanical properties than those of the PLLA/talcum films as determined from dynamic mechanical analysis. This was confirmed from the results of dimensional stability to heat. In summary, the PLLA-PEG-PLLA/talcum composites have potential for use as flexible bioplastics with good dimensional stability to heat.

Monte Carlo simulations of stereocomplex formation in multiblock copolymers

Local miscibility and relative size of block length and crystal thickness codetermine stereocomplex formation in multiblock copolymers.