Patient-Specific or Conventional Instrumentations: A Meta-analysis of Randomized Controlled Trials

Derotational distal femur osteotomy with medial patellofemoral ligament reconstruction can get good outcomes in the treatment of recurrent patellar dislocation with excessive TT-TG and increased femoral anteversion

Background

Surgery is the main treatment for recurrent patellar dislocation (PD). However, due to the complexity of anatomical factors, there is still a lack of consensus on the choice of combined surgical methods. This study aimed to compare the clinical and radiological outcomes of medial patellofemoral ligament reconstruction combined with derotational distal femur osteotomies (MPFLR + DDFO) and combined with tibial tubercle osteotomies (MPFLR + TTO) for recurrent PD with increased femoral anteversion angles (FAA) and excessive tibial tubercle-trochlear groove (TT-TG) distance.

Methods

In this retrospective analysis, MPFLR + DDFO and MPFLR + TTO patients from 2015 to 2020 were included. Group A (MPFLR + DDFO, n = 42) and B (MPFLR + TTO, n = 46) were formed. Clinical outcomes included physical examinations, functional outcomes (Kujala, Lysholm, International Knee Documentation Committee (IKDC), visual analog scale (VAS) and intermittent and persistent osteoarthritis pain scale (ICOAP), Tegner scores), and complications. The Caton-Deschamps index (CD-I), patellar title angle, patellar congruence angle, patella-trochlear groove distance, TT-TG distance, and FAA were used to assess radiological outcomes.

Results

All clinical outcomes improved significantly in both groups, but Group A had significantly better postoperative scores than Group B (Kujala: 89.8 ± 6.4 vs. 82.9 ± 7.4, P < 0.01; Lysholm: 90.9 ± 5.1 vs. 81.3 ± 6.3, P = 0.02; IKDC: 87.3 ± 9.0 vs. 82.7 ± 8.0, P < 0.01; Tegner: 6.0 (5.0, 9.0) vs. 5.0 (4.0, 8.0), P = 0.01). However, there was no significant difference in the VAS and ICOAP scores between the two groups. No dislocation recurrences occurred. Radiological outcomes improved significantly in both groups, but Group A had better outcomes. After surgery, the patellar height of 88.5% (23/26) patients in Group A and 82.8% (24/29) patients in Group B was restored to normal (the Caton-Deschamps index <1.2).

Conclusions

Both MPFLR + TTO and MPFLR + DDFO obtained satisfactory clinical and radiological outcomes in the treatment of recurrent PD with increased FAA and excessive TT-TG. However, the outcomes of MPFLR + DDFO were better and should be considered a priority. MPFLR + TTO may be not necessary for such patients.

Comparison of clinical outcomes of VISIONAIRE patient-specific instrumentation with conventional instrumentation in total knee arthroplasty: a systematic literature review and meta-analysis

INTRODUCTION

Malalignment and resulting complications are major challenges in total knee arthroplasty (TKA) which patient-specific instrumentation (PSI) is proposed to alleviate. Previous PSI meta-analyses of TKA outcomes typically do not differentiate between PSI systems and assess relatively few outcomes, so the value of their findings is limited. VISIONAIRE™ cutting guides (Smith + Nephew Inc., Memphis, TN, USA) is a PSI system based on preoperative magnetic resonance and X-ray imaging. A systematic literature review (SLR) and meta-analysis, focussed specifically on VISIONAIRE, were conducted to assess TKA accuracy, intraoperative outcomes, and postoperative outcomes, compared with conventional instrumentation (CI).

MATERIALS AND METHODS

The SLR was performed using PubMed, Embase, and Google Scholar databases to identify relevant studies published until March 2022. Depending on statistical heterogeneity, meta-analyses were performed for outcome measures with fixed effect (I2 < 50%) or random-effects models (I2 ≥ 50%). Dichotomous outcomes were reported as odds ratios and continuous outcomes were reported as mean differences. Descriptive analyses were performed for outcomes not amenable to meta-analysis.

RESULTS

Outcomes for VISIONAIRE versus CI were reported in 25 studies. Compared with CI, VISIONAIRE reduced odds of mechanical outliers by 40% (p < 0.0001), with no statistically significant differences in odds of overall coronal, sagittal, or rotational plane component outliers. VISIONAIRE improved surgical efficiency (operating room, turnover, and tourniquet times reduced by 7.3% (p = 0.02), 42% (p = 0.022), and 15.9% (p = 0.01), respectively), lowering the odds of blood transfusion by 53% (p = 0.01) and shortening patients' hospital stays (11.1% reduction; p < 0.0001). There were no significant differences between groups in incidence of postoperative complications and (descriptively analyzed) return-to-function outcomes.

CONCLUSION

Options for PSI in TKA differ substantially, and it is important to assess the outcomes of individual systems. The current findings suggest that VISIONAIRE guides can lead to improved alignment accuracy and surgical efficiency compared with CI, without compromising postoperative safety and return-to-function outcomes.

Patient-specific instrumentation in total knee arthroplasty: a review of the current literature

Total knee arthroplasty (TKA) is one of the most frequently performed interventions in the field of Orthopaedic surgery. Over the last decades the implantation technique has improved continuously. The majority of patients is satisfied with the clinical outcome of TKA. However in various clinical follow-ups, up to 20% of unsatisfied patients can be observed. Periprosthetic infection and aseptic loosening seem to be the most common reasons for failure. Malalignment has been discussed as a cause of aseptic loosening and often leads to revision surgery. In order to increase the precision of implant positioning and alignment, new technologies such as patient-specific instrumentation (PSI) have been developed. Since the introduction of PSI, multiple clinical studies have been performed analyzing the clinical and radiological outcome of TKA with PSI technique. This review covers the recent literature of PSI in respect to surgical accuracy, clinical outcome, time- and cost-effectiveness.

Funding has no effect on clinical outcomes of total joint arthroplasty emerging technologies: a systematic review of bibliometrics and conflicts of interest

Background

The use of new total joint arthroplasty technologies, including patient-specific implants/instrumentation (PSI), computer-assisted (CA), and robotic-assisted (RA) techniques, is increasing. There is an ongoing debate regarding the value provided and potential concerns about conflicts of interest (COI).

Methods

PRISMA guidelines were followed. PubMed, MEDLINE, and Web of Science databases were searched for total hip and knee arthroplasties, unicompartmental knee arthroplasties (UKA), PSI, CA, and RA. Bibliometric data, financial COI, clinical/functional scores, and patient-reported outcomes were assessed.

Results

Eighty-seven studies were evaluated, with 35 (40.2%) including at least one author reporting COI, and 13 (14.9%) disclosing industry funding. COI and industry funding had no significant effects on outcomes (P = 0.682, P = 0.447), and there were no significant effects of conflicts or funding on level of evidence (P = 0.508, P = 0.826). Studies in which author(s) disclosed COI had significantly higher relative citation ratio (RCR) and impact factor (IF) than those without (P < 0.001, P = 0.032). Subanalysis demonstrated RA and PSI studies were more likely to report COI or industry funding (P = 0.045). RA (OR = 6.31, 95% CI: 1.61–24.68) and UKA (OR = 9.14, 95% CI: 1.43–58.53) had higher odds of reporting favorable outcomes than PSI.

Conclusions

Author COIs (about 40%) may be lower than previously reported in orthopedic technologies/techniques reviews. Studies utilizing RA and PSI were more likely to report COI, while RA and UKA studies were more likely to report favorable outcomes than PSI. No statistically significant association between the presence of COIs and/or industry funding and the frequency of favorable outcomes or study level of evidence was found.

Level of evidence

Level V Systematic Review

Supplementary Information

The online version contains supplementary material available at 10.1186/s42836-022-00146-3.

Could surgical transepicondylar axis be identified accurately in preoperative 3D planning for total knee arthroplasty? A reproducibility study based on 3D-CT

BACKGROUND

Surgical transepicondylar axis (sTEA) is frequently used for positioning of femoral component rotation in total knee arthroplasty (TKA). Previous studies showed that intraoperative identification of sTEA was not reliable. While surgeons or engineers need to identify sTEA with three-dimensional (3D) computer-aid techniques pre- or intraoperatively, the reproducibility of sTEA identification on preoperative 3D images has not been explored yet. This study aimed to investigate the reproducibility of identifying sTEA in preoperative planning based on computed tomography (CT).

METHODS

Fifty-nine consecutive patients (60 knees involved) who received TKA in our center from April 2019 to June 2019 were included in this study. Six experienced TKA surgeons identified sTEA three times on 3D model established on the basis of knee CT data. The projection angle of each sTEA and the posterior condyle axis on the transverse plane were measured and analyzed.

RESULTS

The overall intra-observer reproducibility was moderate. The median intra-observer variation was 1.27°, with a maximum being up to 14.07°. The median inter-observer variation was 1.24°, and the maximum was 11.47°. The overall intra-class correlation coefficient (ICC) for inter-observer was 0.528 (95% CI 0.417, 0.643).

CONCLUSION

The identification of sTEA on a 3D model established on the basis of knee CT data may not be reliable. Combined with the previous cadaveric and surgical studies, caution should be exercised in determining femoral component rotation by referencing sTEA both preoperatively and intraoperatively.

LEVEL OF EVIDENCE

III.

Patient-specific instrumentation makes sense in total knee arthroplasty

INTRODUCTION

Patient-specific instrumentation (PSI) for total knee arthroplasty (TKA) surgery was initially developed to increase accuracy. The potential PSI benefits have expanded in the last decade, and other advantages have been published. However, different authors are critical of PSI and argue that the advantages are not such and do not compensate for the extra cost. This article aims to describe the recently published advantages and disadvantages of PSI.

AREAS COVERED

Narrative description of the latest publications related to PSI in accuracy, clinical and functional outcomes, operative time, efficiency, and other benefits.

EXPERT COMMENTARY

We have published high accuracy of the system, with a not clinically relevant loss of accuracy, significantly higher precision with PSI than with conventional instruments, and a high percentage of cases in the optimal range and similar to that obtained with computer-assisted navigation, greater imprecision for tibial slope, a significant blood loss reduction, and time consumption, an acceptable and non-significant increase in the cost per procedure and no difference in complications during hospital admission and at 90 days. We think that PSI will not follow the Scott Parabola and that it will continue to be a valuable type of device in some instances of TKA surgery.

Surgical Treatment of Bone Sarcoma

Bone sarcomas are rare primary malignant mesenchymal bone tumors. The three main entities are osteosarcoma, chondrosarcoma, and Ewing sarcoma. While prognosis has improved for affected patients over the past decades, bone sarcomas are still critical conditions that require an interdisciplinary diagnostic and therapeutic approach. While radiotherapy plays a role especially in Ewing sarcoma and chemotherapy in Ewing sarcoma and osteosarcoma, surgery remains the main pillar of treatment in all three entities. After complete tumor resection, the created bone defects need to be reconstructed. Possible strategies are implantation of allografts or autografts including vascularized bone grafts (e.g., of the fibula). Around the knee joint, rotationplasty can be performed or, as an alternative, the implantation of (expandable) megaprostheses can be performed. Challenges still associated with the implantation of foreign materials are aseptic loosening and infection. Future improvements may come with advances in 3D printing of individualized resection blades/implants, thus also securing safe tumor resection margins while at the same time shortening the required surgical time. Faster osseointegration and lower infection rates may possibly be achieved through more elaborate implant surface structures.

A Study of Surgical Accuracy with X-Ray-Based Patient-Specific Instrument (X3DPSI®) vs Conventional Instrument in Total Knee Arthroplasty Surgeries

INTRODUCTION

Patient-specific instruments (PSI) have been shown to be a good solution in getting accurate bone cuts in total knee arthroplasty (TKA) in many studies. However, the need for an extra CT/MRI makes the existing PSI method costly and unsafe. X-ray-based PSI can solve these problems, if proven to be accurate. The purpose of this study was to introduce a novel method to measure the performance of X-ray to 3D-based PSI (X3DPSI ^® ) in achieving planned bone cuts by comparing with conventional instruments (CI).

MATERIALS AND METHODS

This was a prospective study of a total of ten patients undergoing TKA surgery. Preoperative full length lower limb scanogram was done with specialized calibration strap-on marker to develop X3DPSI ^® which was used intraoperatively for the placement of guiding pins for the cutting jig. Similarly, intraoperative guide pins were placed using CI also. Calibrated intraoperative X-ray images, in AP and LAT view, were taken while the cutting-block guiding pins were placed on the distal femur and proximal tibia. These X-ray images were used to calculate the cutting plane alignments for femur and tibia and to simulate the postoperative hip-knee-ankle (HKA) angle and MAD (mechanical axis deviation), in a virtual Tabplan3D environment for both the methods.

RESULTS

The results showed that there was a significant difference between the two methods in terms of femoral cutting plane angles and in terms of the HKA angles and MAD. There was no significant difference in the tibial cutting plane angles in the coronal plane.

CONCLUSION

The mechanical axis alignment achieved based on the virtual cuts made using the X3DPSI ^® was significantly better than the alignment achieved based on the cuts made using the CI, in terms of both HKA and MAD. This novel method of X-ray-based PSI is a low-cost alternative to CT/MRI-based PSI if found to be accurate in future planned studies.

Navigation and robotics improved alignment compared with PSI and conventional instrument, while clinical outcomes were similar in TKA: a network meta-analysis

PURPOSE

To achieve the desired alignment more accurately and improve postoperative outcomes, new techniques such as computer navigation (Navigation), patient-specific instruments (PSI) and surgical robots (Robot) are applied in Total Knee Arthroplasty (TKA). This network meta-analysis aims to compare the radiological and clinical outcomes among the above-mentioned techniques and conventional instruments (CON).

METHODS

A PRISMA network meta-analysis was conducted and study protocol was published online at INPLASY (INPLASY202060018). Three databases (PubMed, EMBASE and Cochrane) were searched up to June 1, 2020. Randomised controlled trials (RCTs) comparing any two of the four techniques were included. A Bayesian network meta-analysis was performed focusing on radiological and clinical outcomes. The odds ratio (OR) or mean difference (MD) in various outcomes were calculated, and the interventions were ranked by the surface under the cumulative ranking area (SUCRA) value.

RESULTS

Seventy-three RCTs were included, with a total of 4209 TKAs. Navigation and Robot could significantly reduce the occurrence of malalignment and malposition compared with PSI and CON, and Navigation could obtain higher medium-and-long-term KSS knee scores than CON. Robot had the greatest advantage in achieving the desired alignment accurately, followed by Navigation; Navigation had the greatest advantage in the KSS score.

CONCLUSION

Navigation and Robot did improve the accuracy of alignment compared with PSI and conventional instrument in TKA, but the above four techniques showed no clinical significance in postoperative outcomes.

LEVEL OF EVIDENCE

I.

Patient-specific instrumentation (PSI) in total ankle arthroplasty: a systematic review

BACKGROUND

Patient-specific instrument (PSI) may theoretically make total ankle arthroplasty (TAA) more accurate. Several studies have reported the outcomes of PSI TAA. The aim of this study is to systematically review the literature of PSI TAA.

METHODS

PubMed, Embase, Web of Science, and Cochrane Library databases were systematically reviewed according to the Preferred Reporting Items for Systematic Reviews and Meta-analysis (PRISMA) guidelines for PSI TAA. The quality of the included studies was evaluated according to Methodological Index for Non-Randomized Studies (MINORS).

RESULT

Nine articles were ultimately included in the systematic review. The implant position and function outcome of TAA was similar between PSI and SI. Prediction accuracy of implant size remained great difference. PSI can shorten the operative time and fluoroscopy time. The quality of current studies on PSI TAA is insufficient to produce high-level evidence.

CONCLUSION

PSI can get similar implant position and clinical outcome in TAA compared to SI, but current evidence is not strong enough to evaluate PSI TAA.

Knee Prosthesis in the Computer Era

Over the past two decades, computer assistance has revolutionalized surgery and has enabled enormous advancements in knee prosthesis surgery. Total knee arthroplasty (TKA) is a hot topic of orthopaedic research. Reflecting population dynamics, its use continues to increase, especially in high demand populations. Therefore, efforts to achieve the best fit and precise alignment in TKA continue. Computer assistance is valuable for knee prosthesis surgeons in this regard. This manuscript investigated the use of computer assistance in knee prosthesis surgery. The effects of computer use on important facets of knee prosthesis surgery, such as precision, clinical aspects, and costs, were examined. Moreover, an overall review of the recent literature on the navigation and personalized cutting guides was conducted.