Biocompatible PANI-Encapsulated Chemically Modified Nano-TiO2 Particles for Visible-Light Photocatalytic Applications

Polyaniline (PANI) constitutes a very propitious conductive polymer utilized in several biomedical, as well as environmental applications, including tissue engineering, catalysis, and photocatalysis, due to its unique properties. In this study, nano-PANI/N-TiO2 and nano-PANI/Ag-TiO2 photocatalytic composites were fabricated via aniline's oxidative polymerization, while the Ag-and N-chemically modified TiO2 nanopowders were synthesized through the sol-gel approach. All produced materials were fully characterized. Through micro-Raman and FT-IR analysis, the co-existence of PANI and chemically modified TiO2 particles was confirmed, while via XRD analysis the composites' average crystallite size was determined as ≈20 nm. The semi-crystal structure of polyaniline exhibits higher photocatalytic efficiency compared to that of other less crystalline forms. The spherical-shaped developed materials are innovative, stable (zeta potential in the range from -26 to -37 mV), and cost-effective, characterized by enhanced photocatalytic efficiency under visible light (energy band gaps ≈ 2 eV), and synthesized with relatively simple methods, with the possibility of recycling and reusing them in potential future applications in industry, in wastewater treatment as well as in biomedicine. Thus, the PANI-encapsulated Ag and N chemically modified TiO2 nanocomposites exhibit high degradation efficiency towards Rhodamine B dye upon visible-light irradiation, presenting simultaneously high biocompatibility in different normal cell lines.

Titania/reduced graphene oxide nanocomposites (TiO2/rGO) as an efficient photocatalyst for the effective degradation of brilliant green in aqueous media: effect of peroxymonosulfate and operational parameters

This study is focused on synthesis of highly efficient Titania/reduced Graphene Oxide (TiO₂/rGO) nanocomposites by means of simple hydrothermal technique. The TiO₂/rGO were synthesized in different ratios of 0.5, 1.0, 2.0, and 3% by varying the concentration of rGO while the concentration of TiO₂ was kept constant and the obtained samples were designated as TrG0.5, TrG1, TrG2, and TrG3 respectively. Different characterization techniques (SEM, TEM, HRTEM, XRD, EDX, TGA, UV-DRS, PL, EIS, and BET) showed high crystallinity, small crystallite size (18.4 nm), high thermal stability, high purity, low band gap energy (E_g = 3.12 eV), and high surface area (65.989 m²/g) for the as-synthesized TiO₂/rGO nanocomposite. The efficiencies of TiO₂/rGO were determined in terms of brilliant green (BG) dye degradation in aqueous media under UV light. The results revealed that 2% TiO₂/rGO (TrG2) showed high efficiency for BG degradation with the k_app of 0.023 min^-1 compared to TiO₂ alone (k_app of 0.006 min^-1). The rate of BG degradation was further synergised by the addition of peroxymonosulfate (PMS) to the system. The degradation of BG was improved to 99.4% by the incorporation of PMS in aqueous media compared to TrG2 alone. Furthermore, the degradation of BG was also examined in various media (neutral, acidic, and basic). The results revealed that by increasing pH of the medium from 3.85 to 8.2 the degradation of BG was enhanced from 99.4 to 99.9% with the corresponding k_app of 0.0602 min^-1. Moreover, the photocatalytic degradation of BG followed the pseudo-first-order kinetics. Radical scavenging experiments showed that ^●OH and SO₄^●- were the main species responsible for the degradation of BG under UV light. Besides, for determining the efficiency of as-synthesized TrG2/PMS system, the degradation of BG was also performed in various water types (distilled water, tape water, synthetic wastewater, and industrial wastewater). The degradation products (DPs) of BG and their corresponding pathways were proposed, accordingly.

Composite Nanoarchitectonics of Photoactivated Titania-Based Materials with Anticancer Properties

The synthesis of titania-based composite materials with anticancer potential under visible-light irradiation is the aim of this study. In specific, titanium dioxide (TiO₂) nanoparticles (NPs) chemically modified with silver were embedded in a stimuli-responsive microgel (a crosslinked interpenetrating network (IP) network that was synthesized by poly (N-Isopropylacrylamide) and linear chains of polyacrylic acid sodium salt, forming composite particles. The ultimate goal of this research, and for our future plans, is to develop a drug-delivery system that uses optical fibers that could efficiently photoactivate NPs, targeting cancer cells. The produced Ag-TiO₂ NPs, the microgel and the composite materials were characterized through X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), micro-Raman spectroscopy, ultraviolet-visible spectroscopy (UV-Vis), dynamic light scattering (DLS) and transmission electron microscopy (TEM). Our results indicated that Ag-TiO₂ NPs were successfully embedded within the thermoresponsive microgel. Either Ag-TiO₂ NPs or the composite materials exhibited high photocatalytic degradation efficiency on the pollutant rhodamine B and significant anticancer potential under visible-light irradiation.

Application of Synthesized Vanadium-Titanium Oxide Nanocomposite to Eliminate Rhodamine-B Dye from Aqueous Medium

In this study, a V@TiO₂ nanocomposite is examined for its ability to eliminate carcinogenic Rhodamine (Rh-B) dye from an aqueous medium. A simple ultrasonic method was used to produce the nanosorbent. In addition, V@TiO₂ was characterized using various techniques, including XRD, HRTEM, XPS, and FTIR. Batch mode studies were used to study the removal of Rh-B dye. In the presence of pH 9, the V@TiO₂ nanocomposite was able to remove Rh-B dye to its maximum extent. A correlation regression of 0.95 indicated that the Langmuir model was a better fit for dye adsorption. Moreover, the maximum adsorption capacity of the V@TiO₂ nanocomposite was determined to be 158.8 mg/g. According to the thermodynamic parameters, dye adsorption followed a pseudo-first-order model. Based on the results of the study, a V@TiO₂ nanocomposite can be reused for dye removal using ethanol.

Synthesis and characterisation of transition metal sulphide-loaded fly ash-based mesoporous EU-12 photocatalysts for degradation of rhodamine B

Transition metal sulphide-loaded fly ash-based EU-12 photocatalysts were synthesized by sono-hydrothermal method followed by ion exchange. The composites were characterized by XRD, FESEM, DSC-TGA, Raman spectroscopy, and BET surface area analysis. The XRD results imply 76.39% crystallinity of EU-12 and morphological studies by FESEM, and TEM revealed the shape and size of EU-12, i.e. rod-shaped with size ranging from 5 to 200 nm. Band gap of all synthesized photocatalysts were found to be ≤ 3.44 eV. The photoactivities of the photocatalysts were examined by degrading rhodamine B (RhB). The results indicated that metal sulphide/EU-12 composite had the strong photoactivity under visible light compared to dark environment. Furthermore, the efficiency of photocatalysts was determined in terms of degradation efficiency towards RhB which was found to be maximum of 98.62% for 0.2 M CdS/EU-12 at 2 gL^-1 of catalyst dosage and 10 ppm of dye concentration within 3 h under visible light source of 200 W.

Synthesis and Application of Innovative and Environmentally Friendly Photocatalysts: A Review

Modern society faces two major challenges: removing pollutants from water and producing energy from renewable sources. To do this, science proposes innovative, low-cost, and environmentally friendly methods. The heterogeneous photocatalysis process fits perfectly in this scenario. In fact, with photocatalysis, it is possible both to mineralize contaminants that are not easily biodegradable and to produce hydrogen from the water splitting reaction or from the conversion of organic substances present in water. However, the main challenge in the field of heterogeneous photocatalysis is to produce low-cost and efficient photocatalysts active under visible light or sunlight. The objective of this review is to compare the new proposals for the synthesis of innovative photocatalysts that reflect the requirements of green chemistry, applied both in the removal of organic contaminants and in hydrogen production. From this comparison, we want to bring out the strengths and weaknesses of the proposals in the literature, but above all, new ideas to improve the efficiency of heterogeneous photocatalysis guaranteeing the principles of environmental and economic sustainability.

Dye Removal Ability of Pure and Doped Graphitic Carbon Nitride

Background:

Rapid escalation in textile, paper, pesticides, pharmaceuticals and several other chemical based manufacturing industries due to amplification in human requirements have proportionately contributed to the extreme contamination of water ecosystem, resulted from the discharge of toxic pollutants from industries. Effluents from textile industries are comprised of coloured dyes like Rhodamine B, Methyl Orange, Methylene Blue and phenolic compounds which deserve special mention owing to their non-biodegradable, carcinogenic and severe detrimental nature. Urgent needs to ameliorate this fast declining environmental situation are of immense necessity in current scenario.

Objectives:

Objectives: In this regard, graphitic carbon nitride (GCN) is a distinguished material for water purification-based applications because of its exclusive characteristics making it highly prospective for degradation of toxic dyes from water by catalysis and adsorption techniques. GCN has been a material of conspicuous interest in recent times owing to its two dimensional sheets like structure with favourable surface area, and cost-effective synthesis approaches along with high production yield. This article presents a detail study of different aspects of GCN as a material of potential for water purification. Through extensive literature survey it has been shown that GCN is an effective material to be used in the fields of application. Several effective procedures like catalysis or adsorption for removal of dyes from water have been discussed with their basic science behind.

Conclusions:

This systematic effort shows that GCN can be considered to be one of the most efficient water purifier with further advantages arising from its easy and cost effective large scale synthesis.

Green Synthesis of TiO2 Nanoparticles Using Acorus calamus Leaf Extract and Evaluating its Photocatalytic and In Vitro Antimicrobial Activity

Here, we present an innovative and creative sustainable technique for the fabrication of titania (TiO2) using Acorus calamus (A. calamus) leaf extract as a new biogenic source, as well as a capping and reducing agent. The optical, structural, morphological, surface, and thermal characteristics of biosynthesized nanoparticles were investigated using UV, FTIR, SEM, DLS, BET, and TGA-DSC analysis. The phase formation and presence of nanocrystalline TiO2 were revealed by the XRD pattern. FTIR analysis revealed conjugation, as well as the presence of Ti–O and O–H vibrational bands. The nanoparticles were noticed to be globular, with an average size of 15–40 nm, according to the morphological analysis, and the impact of size quantification was also investigated using DLS. The photocatalytic activity of bare, commercial P-25 and biosynthesized TiO2 (G-TiO2) nanoparticles in aqueous solution of rhodamine B (RhB) dye was investigated under visible light irradiation at different time intervals. The biosynthesized TiO2 nanoparticles exhibited strong photocatalytic activity, degrading 96.59% of the RhB dye. Different kinetic representations were utilized to analyze equilibrium details. The pseudo-first-order reaction was best suited with equilibrium rate constant (K1) and regression coefficients (R2) values 3.72 × 10−4 and 0.99, respectively. The antimicrobial efficacy of the prepared nanoparticles was investigated using the disc diffusion technique. Further, biosynthesized TiO2 showed excellent antimicrobial activity against the selected gram-positive staining (B. subtilis, S. aureus) over gram-negative (P. aeruginosa, E. coli) pathogenic bacteria in comparison to bare TiO2.

Novel N,C,S-TiO2/WO3/rGO Z-scheme heterojunction with enhanced visible-light driven photocatalytic performance

Novel N,C,S-TiO₂/WO₃/rGO Z scheme photocatalyst was successfully synthesized from graphite, TIOT, and ammonium metatungstate precursors. Material characteristics such as crystal structure, surface morphology, functional groups, specific surface area, elemental composition, band gap energy, and electron-hole recombination were characterized by XRD, TEM, BET, SEM/EDX, FT-IR, UV-VIS, and PL methods. The as-synthesized novel N,C,S-TiO₂/WO₃/rGO Z-scheme heterojunction photocatalyst exhibited visible light-driven photocatalytic activity (the band gap energy = 2.24 eV), could generate both effective electrons and holes, and presented the lowest electron-hole recombination rate compared to all individual components. Different factors impacting the photocatalytic decomposition of Direct Blue 71 (DB 71) by the N,C,S-TiO₂/WO₃/rGO system were studied. The results showed that pH of the solution, catalyst load, DB 71 initial concentration, and reaction time affected the DB 71 photocatalytic degradation efficiency. The DB 71 degradation completed after 100 min with a typical efficiency of over 91%, which was much better than other photocatalytic systems. The DB 71 degradation process followed the pseudo-first-order kinetics model with coefficients of determination > 0.95 for all conditions. The photocatalyst was easily regenerated, and exhibited a very good stability, with a photocatalytic degradation efficiency of over 83.0% after 3 cycles.