Shaping Ability of XP Endo Shaper File in Curved Root Canal Models

Optimizing Root Canal Therapy: An In Vitro Comparative Study of Innovative File Systems on Mandibular Premolar Fracture Resistance

INTRODUCTION AND AIM

 Root canal therapy is a vital procedure for saving teeth by removing infection and cleaning the complex root canal system. However, a delicate balance exists between thorough cleaning and preserving tooth strength. The study aims to evaluate the instrumentation effect of three innovative file systems, XP-endo® shaper, Reciproc®, and Self-adjusting file (SAF) on fracture resistance of mandibular premolars.

MATERIALS AND METHODS

Thirty single-rooted mandibular premolars were collected; a standard access cavity was prepared and the working length was established 1 mm short of the apex. The teeth were randomly divided into three groups(n=10). In Group 1, the shaping of the specimens was achieved using XP-endo® shaper; in Group 2, it was instrumented using Reciproc® file; and in Group 3, it was instrumented using SAF. All samples were decoronated and the roots were mounted vertically in acrylic resin and subjected to fracture resistance under a universal testing machine.

RESULTS

Intergroup analysis was done by one-way ANOVA followed by Bonferroni post hoc test, which did not report a statistically significant difference (p>0.05).

CONCLUSION

All three tested file systems were similar in fracture resistance. XP-endo® shaper exhibited better fracture resistance on root canal instrumentation when compared to Reciproc® and SAF although they are not statistically significant.

Impact of cooling on shaping ability of thermally treated files in canal models with double curvature

Background

This study compared the ability of thermally treated files in shaping simulated canals with double curvature. Fifty-six canals were enlarged to a final size of 25 with ProTaper Next (PTN) or ZenFlex (ZF).

Materials

Half of the samples were shaped with cooled files (n = 14 each). The amount of removed resin was measured and canal deviation was determined at eight levels. Shaping time and maximum shaping torque values were also recorded. Data were statistically analyzed using analysis of variance and LSD, Kruskal-Wallis, and chi-square tests at a 0.05 significance level.

Results

Compared to PTN and cooled PTN, ZF and cooled ZF required lesser time to shape the canals. The maximum torques were found comparable between the groups. All the groups generated negligible deviations at every canal level evaluated and maintained the canal geometry. Although not significant, the cooled PTN and ZF files exhibited lesser canal deviations than their counterparts.

Conclusion

All groups demonstrated similar shaping ability whilst maintaining the original curvature of the canal in simulated canals with double curvature. However, ZF groups were able to shape the canals faster than PTN groups. There was a trend that cooled files made lesser canal deviations compared to their counterparts.

Analysis of Shaping Abilities of Rotary File Systems in Oval Canals with Moderate Root Curvature: A Randomized Controlled Ex Vivo Study

AIM

The purpose of this study was to evaluate and compare the canal transportation tendencies and centering ability of the TruNatomy shaper (TN) and XP-endo shaper (XPS) rotary systems in oval-shaped canals with moderate root curvature (15°-25°), using cone-beam computed tomography (CBCT) imaging.

MATERIALS AND METHODS

Sixty single-rooted permanent human teeth were chosen after considering the inclusion and exclusion criteria. The teeth were divided into two groups (n = 30). The test group was instrumented with TN files and the other with XPS according to manufacturer's instructions. CBCT images were taken before and after instrumentation to record the root canal distances from mesial, distal, buccal, and lingual borders of the root at 3, 5, and 7 mm distances from the root apex using a specific formula. Statistical analysis was done using the Statistical Package for the Social Sciences software program, version 20.0. The data were analyzed using the unpaired t test.

RESULTS

Both TN and XPS were safe for use in oval-shaped canals with moderate root curvature. However, the XPS showed higher buccolingual transportation as compared with TN at 3 mm from the apex and higher mesiodistal transportation at 3 and 5 mm levels from the apex as compared with TN.

CONCLUSION

Canal transportation has been detected in both systems; however, the values obtained were within the safe range (<0.3 mm). Overall, no significant difference was observed between TN and XPS (p > 0.05) in their canal transportation tendencies and centering ability.

CLINICAL SIGNIFICANCE

The study assesses the canal centering and transportation tendencies of the recently launched TN rotary system in extracted teeth with a combination of morphologies. The findings of the study are significant clinically as minimum transportation of the canal, minimal dentin removal, efficient disinfection, and three-dimensional obturation of the root canal are considered important factors in deciding the prognosis of endodontic therapy.

Incidence of Post-Operative Pain following a Single-Visit Pulpectomy in Primary Molars Employing Adaptive, Rotary, and Manual Instrumentation: A Randomized Clinical Trial

Background and Objectives. To differentiate the intensity of postoperative pain after primary molar pulpectomy employing manual instrumentation versus two single-file systems with different kinetics (the XP-Endo shaper file with adaptive instrumentation vs. the Kedo-SG blue file with continuous rotation instrumentation). Materials and Methods. This three-arm, single-blind, randomized clinical trial included assessing 75 healthy children between 4 to 9 years who required pulpectomy for primary molars (mandibular first and second). The three groups each had an equal number of children. Children in Group 1 had their teeth instrumented with the XP-endo Shaper, children in Group 2 had their teeth instrumented with the Kedo-SG Blue file, and children in Group 3 had their teeth instrumented manually using K-files. The degree of postoperative pain was measured using a four-point pain scale at 6-, 12-, 24-, 48-, and 72-h following therapy. Each participant's parent received five flashcards with four faces and a word characterizing each face. The data were analyzed using Kruskal-Wallis and chi-square tests. The level of significance was set to 5%. Results. During the follow-up period, there was a significant difference in postoperative pain intensity between the three groups. The XP-endo shaper was associated with considerably decreased post operative at the 6- and 12-h interval followed by Kedo-SG. The highest post-operative discomfort across the groups was related to the patients who underwent manual instrumentation. Conclusion. In comparison to rotary and manual instrumentation, postoperative pain severity was reduced with adaptive instrumentation.

Comparison of Two Reciprocating and Anatomical Single File Techniques in Cleaning Oval Anatomies

Introduction

The present study aimed to compare the capability of two single-file shaping systems in disinfecting and cleaning long oval root canals.

Materials and Methods

Fifty single-rooted teeth were prepared, contaminated with Enterococcus faecalis and divided into two groups. Two samplings were obtained; S1 before chemo-mechanical preparation and S2 after the preparation. Depending on the group, chemo-mechanical preparation was performed with XP-endo Shaper (XPS) and Wave One Gold (WOG). Five teeth from each group were observed under scanning electron microscopy (1000×) to evaluate the cleanliness of root canals at 3, 6 and 9 mm from the apex. All probability (P-values) were two-tailed, statistical significance was set at 0.05 and analyses were conducted using SPSS statistical software.

Results

A significant reduction in the colony forming units was observed from S1 to S2 in both tested groups. In S2, XPS group obtained significantly lower colony forming units (P<0.001). In the cleanliness study, XPS group resulted in significantly cleaner canals compared to WOG.

Conclusions

Based on this in vitro study XPS system was more effective in disinfecting and cleaning long oval canals.

Influence of Sodium Hypochlorite and Chlorhexidine on the Dynamic Cyclic Fatigue Resistance of XP Endo Shaper Instruments

Objective  This study evaluated the dynamic cyclic fatigue resistance of the XP-Endo Shaper (XPS), associated with chlorhexidine digluconate (CHX) or sodium hypochlorite (NaOCl) in two different formulations: gel (G) or liquid (L).

Materials and Methods  Sixty XPS were used in an artificial stainless-steel canal, and the files were fully immersed in the irrigating solution throughout the experiment until the fracture. The files were divided into six groups ( n  = 10) based on the irrigation solution used: NaOCl(L), NaOCl(G), CHX(L), CHX(G), natrosol gel (NAT) (control), and lubricating oil (LO) (control). The artificial canal was manufactured 1.5 mm wide, 20 mm long, and, 3.5 mm deep with a straight cervical segment measuring 14.29 mm; an apical segment of 4.71 mm with 3 mm radius; and 90 degrees of curvature apical 1 mm long straight segment. Resistance to cyclic fatigue was determined by recording the number of cycles to fracture (NCF).

Results  The CHX(G), CHX(L), and OIL (LO) groups showed no significant difference between them and presented longer time to fracture ( p  > 0.05). NaOCl(L) shows the lowest NCF without significant differences between NaOCl(G) and NAT. The NCF of the NaOCl(G) was statistically similar to the CHX(L) and statistically lower than the CHX(G) and OIL groups. NAT did not present a statistical difference of the NaOCl(L), NaOCl(G), and presented a significantly lower NCF than the CHX(G) ( p  < 0.01).

Conclusion  The use of CHX(G) resulted in increased cyclic fatigue resistance of the XPS instruments compared to NaOCl or LO.

Shaping ability of four single-file systems in the instrumentation of second mesiobuccal canals of three-dimensional printed maxillary first molars

Background

This study evaluated and compared the shaping ability of four advanced single-file nickel-titanium (NiTi) systems during the preparation of curved second mesiobuccal (MB2) canals in maxillary first molar replicas fabricated by three-dimensional (3D) printing via micro-computed tomography (Micro-CT) imaging.

Methods

A total of 60 3D-printed maxillary first molar replicas were constructed from one extracted tooth, with an angle of curvature ranging from 15° to 25°. The MB2 canals from these 60 replicas were divided into 4 groups of 15 replicas according to the canal instrumentation system used, namely, Waveone gold (WOG), Reciproc blue (RCB), XP-endo shaper (XPS) and M3-L. The specimens were scanned before and after preparation using Micro-CT. The pre- and post-instrumentation images of each specimen were superimposed, and the amount of resin removed, the change in surface area, the canal transportation, and centering ability were assessed using the Mimics software. Instrumentation time was also recorded. One-way analysis of variance and least significant difference (LSD) tests were used to statistically compare the groups. The significance level was set at 5%.

Results

Instrumentation time with M3-L was significantly longer than the other systems (P<0.05). The amount of resin removed and the change in surface area generated by the 4 systems were different at the apical, middle, and coronal thirds, and the total canal (P<0.05). Overall, WOG and XPS resulted in the less change than RCB and M3-L. There was no significant difference among the groups at the middle third regarding canal transportation and centering ability (P>0.05). However, a significant difference was found at the apical level (P<0.05), where RCB showed the poorest centering ability and the highest canal transportation (P<0.05). In addition, XPS resulted in the least canal transportation (P<0.05) at the coronal level, while there was no significant difference between the four groups in terms of centering ability.

Conclusions

The M3-L instrument required more time to prepare the curved MB2 canals compared with the other systems. Overall, WOG and XPS showed the least resin removal and surface area change. M3-L, XPS, and WOG instruments respected the original canal curvature better than RCB files.

Effect of number of uses and sterilization on the instrumented area and resistance of reciprocating instruments

Objectives

This study evaluated the effect of repeated uses and autoclaving in the instrumented area, fracture resistance, and time of instrumentation of thermally treated nickel-titanium reciprocating systems.

Materials and Methods

Two hundred simulated canals were instrumented using Reciproc Blue and WaveOne Gold. Each file was used up to 10 times or until fracture. The instrumented area was measured in pre- and post-operative images, using ImageJ software. Kaplan-Meier survival analysis evaluated the number of uses of instruments before fracture. Instrumented area and time of instrumentation were analyzed by Mann-Whitney U test and Kruskal-Wallis. Correlations among the number of uses and instrumented area were measured. The level of statistical significance was set at p < 0.05.

Results

Reciproc Blue presented a higher estimated number of uses in comparison with WaveOne Gold (p = 0.026), but autoclaving did not affect the resistance to fracture of instruments (p > 0.05). The instrumented area was different among the evaluated groups (p = 0.039), and the instrumented area along the uses of both tested instruments was reduced. With the time of instrumentation, there was also a significant difference among the evaluated groups; the groups without sterilization cycles were faster, in comparison to those submitted to autoclaving (p = 0.010).

Conclusions

Reciproc Blue was more resistant than WaveOne Gold, suffering later fracture. Additionally, the sterilization cycles did not influence the estimated number of uses of thermally treated reciprocating instruments, but the instrumented area of root canals was reduced along with the repeated uses of both instruments.

Debris Extrusion Using Reciproc Blue and XP Endo Shaper Systems in Root Canal Retreatment

This study aimed at assessing the performance of Reciproc Blue (RB) and XP Endo Shaper (XPS), used for canal retreatment on extracted teeth, in terms of debris extrusion and obturating materials removal. Thirty mandibular premolars were prepared to ProTaper X2 file, obturated using warm vertical compaction, and then incubated for 28 days at 100% humidity at 37°C. Teeth were randomly assigned into two groups, according to the system used for retreatment (RB and XPS). During retreatment, debris extruded beyond the apex was collected in preweighed Eppendorf tubes, and the retreatment time was measured. Afterward, the teeth were longitudinally sectioned to assess the remaining obturating materials. Data were statistically analyzed using the Mann-Whitney test and chi-square test at a 95% confidence level. All the samples had extruded debris at varying weights ranging from 0.125 mg to 3.680 mg. XPS extruded less debris than RB, but no difference was detected (Mann-Whitney test; P > 0.05). RB and XPS required 54.9 ± 17.9 and 22.3 ± 9.3 seconds to perform retreatment procedures, respectively (Mann-Whitney test; P < 0.05). The sealer was found in all the samples. Compared to the RB group, fewer samples with remaining gutta-percha were found in the XPS group (Chi-square test; P < 0.05). None of the files fractured during the retreatment procedure. The tested files appear to extrude debris beyond the apex. Although XPS was able to remove the gutta-percha completely from the majority of the canals, it was unable to remove the sealer.

Micro-computed Evaluation of Canal Transportation and Centering Ability of 5 Rotary and Reciprocating Systems with Different Metallurgical Properties and Surface Treatments in Curved Root Canals

INTRODUCTION

The aim of this study was to evaluate the transportation and centering ability of 5 different rotary and reciprocating file systems with different metallurgical properties and surface treatments in curved root canals.

METHODS

Fifty mesiobuccal round canals of upper molars with a curvature of 25°-40° were assigned to 5 experimental groups (n = 12) according to the instrumentation system used: ProTaper Next (Dentsply Sirona, York, PA), Reciproc Blue (RCB [VDW, Munich, Germany]), Reciproc (VDW), TruNatomy (TRN [Dentsply Sirona]), and XP-endo Shaper (FKG, La Chaux-de-Fonds, Switzerland). During instrumentation, 5 mL 2.5% sodium hypochlorite was used in each root canal. The final irrigation protocol included 15% EDTA followed by sodium hypochlorite irrigation. The micro-computed tomographic scanning of the samples was performed before and after instrumentation to analyze the transportation and centering ability at 3 canal levels. The results were analyzed with the 1-way analysis of variance test with the corresponding post hoc test.

RESULTS

Overall, RCB caused significantly more canal transportation compared with the other techniques (P < .05). There were no significant differences between the other techniques (P > .05). ProTaper Next had a significantly better ability to stay within the central axis of the root canal compared with the Reciproc and RCB techniques (P = .046 and P = .017, respectively). In the apical third, all techniques caused similar apical transportation and centering ability (P > .05). In the middle and cervical parts of the canal, the RCB caused significantly greater canal transportation than the other techniques (P < .05).

CONCLUSIONS

Under the limitations of this study, all tested techniques had similar transportation and centering abilities in the apical part of the canal. However, the overall results and those in the middle and coronal parts of the canal indicated that reciprocating instruments resulted in more canal transportation and less centered preparations.

Analysis of Force and Torque with XP Shaper and OneCurve Systems During Shaping of Narrow Canals

Objective:

The purpose of this laboratory-based study was to compare the shaping forces and torques developed by the XP Shaper (FKG Dentaire SA, La Chaux-de-fonds, Switzerland) and OneCurve (Micro-Mega, Besancon, France) systems during shaping of narrow canals.

Methods:

Mandibular premolars with a single canal were divided equally into two groups; XP Shaper and OneCurve (n=16 each). In both groups, the canals were shaped with XP Shaper file (30/01) or OneCurve file (25/O6) that was inserted three times until it reached the canal length. The tooth was surrounded by water under controlled simulated intracanal temperature throughout the experiment. The inward and outward peak forces and the peak torques were recorded and analyzed statistically using the Mann-Whitney test. The shaping times were analyzed using Student’s t-test. The significance level was set at 5%.

Results:

In both groups, the developed forces in both directions and the torques increased with the successive insertions of the file. In the two groups, the inward peak forces ranged from 0.33 to 3.12 N, while the outward peak forces ranged from 0.09 to 1.96 N. In the three insertions, the XP Shaper showed significantly lower peak forces in both directions. The peak torque developed in both groups ranged from 0.12 to 1.52 N.cm. XP Shaper had significantly lower torque values in all the insertions than OneCurve. The XP Shaper system was able to completely shape the canals in 33.4 seconds while the OneCurve system was able to completely shape the canals in 32.8 seconds.

Conclusion:

The XP Shaper system showed favorably lower force and torque values during canal shaping compared with the OneCurve system.

Dentinal Microcrack Formation after Root Canal Instrumentation by XP-Endo Shaper and ProTaper Universal: A Microcomputed Tomography Evaluation

Aim

To evaluate dentinal microcrack formation on root canals instrumented, continuously in the body temperature, with XP-endo shaper (XPES) and ProTaper Universal (PTU), by means of microcomputed tomographic (micro-CT) analysis. Methodology. Nineteen mesial roots with two separate canals (Vertucci Type IV) of extracted mandibular molars were used in this study. The root canals (N = 38) were divided into 2 groups. Group 1 (n = 19): all MB canals were instrumented with XPES. Group 2 (n = 19): all ML canals were instrumented with PTU. All roots were scanned with micro-CT before and after instrumentation. Two precalibrated examiners evaluated the cross-sectional images of each sample with DataViewer program. The dentinal microcracks (complete and incomplete) were counted in each third of the root for the preinstrumentation and the postinstrumentation images. Wilcoxin signed-rank and Mann–Whitney U tests were used for statistical analysis at a significance level of P < 0.05.

Results

The number of microcracks increased significantly (P < 0.05) after instrumentation with XPES in the middle and cervical thirds. The number of microcracks increased significantly (P < 0.05) after instrumentation with PTU in the cervical third only. There was no significant difference between the groups in the cervical and apical thirds. In the middle third, the XPES induced more incomplete microcracks than PTU (P < 0.05).

Conclusion

Within the limitations of this study, there was no significant difference in the dentinal microcrack formation between XPES and PTU in the apical and cervical thirds of the root. However, XPES instrumentation induced more incomplete microcracks than PTU in the middle third of human roots.